Microchip® Advanced Software Framework

Human interface on EVK1100 :

• PWR led is on when power present
• Led 0 is on when USB OTG cable is plugged
• Led 1 is on when a device is connected
• Led 2 blinks when a HID mouse device is enumerated and USB in idle mode
  • The blink is slow (1s) with low speed device
  • The blink is normal (0.5s) with full speed device
  • The blink is fast (0.25s) with high speed device
• Led 3 blinks when a MSC device is enumerated and USB in idle mode
  • The blink is slow (1s) with low speed device
  • The blink is normal (0.5s) with full speed device
  • The blink is fast (0.25s) with high speed device
• Led 4 green is on when the mouse move
• Led 4 red is on when a mouse button is down
• Led 5 green is on when a LUN test is success
• Led 5 red is on when a LUN test is unsuccessful
• Switch PB0 allows to enter the device in suspend mode
• Switch PB1 allows to enter the device in suspend mode with remote wakeup feature authorized
• Only Push joystick button can be used to wakeup USB device in suspend mode

Note: On board the LED labels are incremented of one. E.g. Led0 in software corresponding at Led1 label on board.