XPLAIN board header file.

This file contains definitions and services related to the features of the XPLAIN board.

To use this board, define BOARD=XPLAIN.

#include "compiler.h"

Macros
#define	LED_COUNT 8
	Number of LEDs. More...

GPIO Connections of LEDs
#define	LED0_GPIO IOPORT_CREATE_PIN(PORTE,0)

#define	LED1_GPIO IOPORT_CREATE_PIN(PORTE,1)

#define	LED2_GPIO IOPORT_CREATE_PIN(PORTE,2)

#define	LED3_GPIO IOPORT_CREATE_PIN(PORTE,3)

#define	LED4_GPIO IOPORT_CREATE_PIN(PORTE,4)

#define	LED5_GPIO IOPORT_CREATE_PIN(PORTE,5)

#define	LED6_GPIO IOPORT_CREATE_PIN(PORTE,6)

#define	LED7_GPIO IOPORT_CREATE_PIN(PORTE,7)

#define	LED0 LED0_GPIO

#define	LED1 LED1_GPIO

#define	LED2 LED2_GPIO

#define	LED3 LED3_GPIO

#define	LED4 LED4_GPIO

#define	LED5 LED5_GPIO

#define	LED6 LED6_GPIO

#define	LED7 LED7_GPIO

GPIO Connections of Push Buttons
#define	GPIO_PUSH_BUTTON_0 IOPORT_CREATE_PIN(PORTF,0)

#define	GPIO_PUSH_BUTTON_1 IOPORT_CREATE_PIN(PORTF,1)

#define	GPIO_PUSH_BUTTON_2 IOPORT_CREATE_PIN(PORTF,2)

#define	GPIO_PUSH_BUTTON_3 IOPORT_CREATE_PIN(PORTF,3)

#define	GPIO_PUSH_BUTTON_4 IOPORT_CREATE_PIN(PORTF,4)

#define	GPIO_PUSH_BUTTON_5 IOPORT_CREATE_PIN(PORTF,5)

#define	GPIO_PUSH_BUTTON_6 IOPORT_CREATE_PIN(PORTF,6)

#define	GPIO_PUSH_BUTTON_7 IOPORT_CREATE_PIN(PORTF,7)

SPI Connections of the AT45DBX Data Flash Memory
#define	AT45DBX_SPI &SPIC

#define	AT45DBX_CS IOPORT_CREATE_PIN(PORTC,1)

#define	AT45DBX_MASTER_SS IOPORT_CREATE_PIN(PORTC,4)

#define	AT45DBX_MASTER_SCK IOPORT_CREATE_PIN(PORTC,7)

#define	AT45DBX_MASTER_MOSI IOPORT_CREATE_PIN(PORTC,5)

#define	AT45DBX_MASTER_MISO IOPORT_CREATE_PIN(PORTC,6)

#define	AT45DBX_SPI_CLK_MASK SYSCLK_PORT_C

DAC connection and control of the Speaker
#define	SPEAKER_DAC_MODULE DACB

#define	SPEAKER_DAC_CHANNEL DAC_CH0

#define	SPEAKER_SIGNAL_PIN IOPORT_CREATE_PIN(PORTB, 2)

#define	SPEAKER_ENABLE_PIN IOPORT_CREATE_PIN(PORTQ, 3)

#define	SPEAKER_ENABLE_LEVEL true

External oscillator
#define	BOARD_XOSC_HZ 32768

#define	BOARD_XOSC_TYPE XOSC_TYPE_32KHZ

#define	BOARD_XOSC_STARTUP_US 500000

Display Xplained
#define	DISPLAY_XPLAINED_USART_SPI &USARTD1

#define	DISPLAY_XPLAINED_CS IOPORT_CREATE_PIN(PORTD, 4)

#define	DISPLAY_XPLAINED_TE IOPORT_CREATE_PIN(PORTD, 2)

#define	DISPLAY_XPLAINED_RESET IOPORT_CREATE_PIN(PORTD, 1)

#define	DISPLAY_XPLAINED_BACKLIGHT IOPORT_CREATE_PIN(PORTD, 0)

#define AT45DBX_CS IOPORT_CREATE_PIN(PORTC,1)

Referenced by board_init().

#define AT45DBX_MASTER_MISO IOPORT_CREATE_PIN(PORTC,6)

Referenced by board_init().

#define AT45DBX_MASTER_MOSI IOPORT_CREATE_PIN(PORTC,5)

Referenced by board_init().

#define AT45DBX_MASTER_SCK IOPORT_CREATE_PIN(PORTC,7)

Referenced by board_init().

#define AT45DBX_MASTER_SS IOPORT_CREATE_PIN(PORTC,4)

#define AT45DBX_SPI &SPIC

#define AT45DBX_SPI_CLK_MASK SYSCLK_PORT_C

#define BOARD_XOSC_HZ 32768

Referenced by osc_get_rate(), and sysclk_get_main_hz().

#define BOARD_XOSC_STARTUP_US 500000

#define BOARD_XOSC_TYPE XOSC_TYPE_32KHZ

Referenced by osc_enable_external().

#define DISPLAY_XPLAINED_BACKLIGHT IOPORT_CREATE_PIN(PORTD, 0)

Referenced by board_init().

#define DISPLAY_XPLAINED_CS IOPORT_CREATE_PIN(PORTD, 4)

Referenced by board_init().

#define DISPLAY_XPLAINED_RESET IOPORT_CREATE_PIN(PORTD, 1)

Referenced by board_init().

#define DISPLAY_XPLAINED_TE IOPORT_CREATE_PIN(PORTD, 2)

Referenced by board_init().

#define DISPLAY_XPLAINED_USART_SPI &USARTD1

#define GPIO_PUSH_BUTTON_0 IOPORT_CREATE_PIN(PORTF,0)

Referenced by board_init().

#define GPIO_PUSH_BUTTON_1 IOPORT_CREATE_PIN(PORTF,1)

Referenced by board_init().

#define GPIO_PUSH_BUTTON_2 IOPORT_CREATE_PIN(PORTF,2)

Referenced by board_init().

#define GPIO_PUSH_BUTTON_3 IOPORT_CREATE_PIN(PORTF,3)

Referenced by board_init().

#define GPIO_PUSH_BUTTON_4 IOPORT_CREATE_PIN(PORTF,4)

Referenced by board_init().

#define GPIO_PUSH_BUTTON_5 IOPORT_CREATE_PIN(PORTF,5)

Referenced by board_init().

#define GPIO_PUSH_BUTTON_6 IOPORT_CREATE_PIN(PORTF,6)

Referenced by board_init().

#define GPIO_PUSH_BUTTON_7 IOPORT_CREATE_PIN(PORTF,7)

Referenced by board_init().

#define LED0 LED0_GPIO

#define LED0_GPIO IOPORT_CREATE_PIN(PORTE,0)

Referenced by board_init().

#define LED1 LED1_GPIO

#define LED1_GPIO IOPORT_CREATE_PIN(PORTE,1)

Referenced by board_init().

#define LED2 LED2_GPIO

#define LED2_GPIO IOPORT_CREATE_PIN(PORTE,2)

Referenced by board_init().

#define LED3 LED3_GPIO

#define LED3_GPIO IOPORT_CREATE_PIN(PORTE,3)

Referenced by board_init().

#define LED4 LED4_GPIO

#define LED4_GPIO IOPORT_CREATE_PIN(PORTE,4)

Referenced by board_init().

#define LED5 LED5_GPIO

#define LED5_GPIO IOPORT_CREATE_PIN(PORTE,5)

Referenced by board_init().

#define LED6 LED6_GPIO

#define LED6_GPIO IOPORT_CREATE_PIN(PORTE,6)

Referenced by board_init().

#define LED7 LED7_GPIO

#define LED7_GPIO IOPORT_CREATE_PIN(PORTE,7)

Referenced by board_init().

#define LED_COUNT 8

Number of LEDs.

#define SPEAKER_DAC_CHANNEL DAC_CH0

#define SPEAKER_DAC_MODULE DACB

#define SPEAKER_ENABLE_LEVEL true

#define SPEAKER_ENABLE_PIN IOPORT_CREATE_PIN(PORTQ, 3)

#define SPEAKER_SIGNAL_PIN IOPORT_CREATE_PIN(PORTB, 2)

Microchip® Advanced Software Framework

Macros