- i -

• IER_ERROR_INTERRUPTS : freertos_usart_serial.c , freertos_uart_serial.c
• INCLUDE_eTaskGetState : FreeRTOS.h
• INCLUDE_MODULE_TEST : FreeRTOSConfig.h
• INCLUDE_uxTaskGetStackHighWaterMark : FreeRTOS.h
• INCLUDE_uxTaskPriorityGet : FreeRTOSConfig.h
• INCLUDE_vTaskCleanUpResources : FreeRTOSConfig.h
• INCLUDE_vTaskDelay : FreeRTOSConfig.h
• INCLUDE_vTaskDelayUntil : FreeRTOSConfig.h
• INCLUDE_vTaskDelete : FreeRTOSConfig.h
• INCLUDE_vTaskPrioritySet : FreeRTOSConfig.h
• INCLUDE_vTaskSuspend : FreeRTOSConfig.h
• INCLUDE_xQueueGetMutexHolder : FreeRTOS.h
• INCLUDE_xSemaphoreGetMutexHolder : FreeRTOS.h
• INCLUDE_xTaskAbortDelay : FreeRTOS.h
• INCLUDE_xTaskGetCurrentTaskHandle : FreeRTOS.h
• INCLUDE_xTaskGetHandle : FreeRTOS.h
• INCLUDE_xTaskGetIdleTaskHandle : FreeRTOS.h
• INCLUDE_xTaskGetSchedulerState : FreeRTOS.h
• INCLUDE_xTaskResumeFromISR : FreeRTOS.h
• INCLUDE_xTimerPendFunctionCall : FreeRTOS.h
• INSERT_LED_DESCRIPTOR : led.c
• IOPORT_BASE_ADDRESS : ioport_pio.h
• IOPORT_CREATE_PIN : ioport_pio.h
• IOPORT_MODE_DEBOUNCE : ioport_pio.h
• IOPORT_MODE_GLITCH_FILTER : ioport_pio.h
• IOPORT_MODE_MUX_A : ioport_pio.h
• IOPORT_MODE_MUX_B : ioport_pio.h
• IOPORT_MODE_MUX_BIT0 : ioport_pio.h
• IOPORT_MODE_MUX_BIT1 : ioport_pio.h
• IOPORT_MODE_MUX_C : ioport_pio.h
• IOPORT_MODE_MUX_D : ioport_pio.h
• IOPORT_MODE_MUX_MASK : ioport_pio.h
• IOPORT_MODE_OPEN_DRAIN : ioport_pio.h
• IOPORT_MODE_PULLDOWN : ioport_pio.h
• IOPORT_MODE_PULLUP : ioport_pio.h
• IOPORT_PIO_OFFSET : ioport_pio.h
• IOPORT_PIOA : ioport_pio.h
• IOPORT_PIOB : ioport_pio.h
• IOPORT_PIOC : ioport_pio.h
• IOPORT_PIOD : ioport_pio.h
• IOPORT_PIOE : ioport_pio.h
• IOPORT_PIOF : ioport_pio.h
• irq_initialize_vectors : interrupt_sam_nvic.h
• irq_register_handler : interrupt_sam_nvic.h
• is_constant : compiler.h
• Is_global_interrupt_enabled : interrupt_sam_nvic.h
• Is_udd_address_enabled : udp_device.h
• Is_udd_address_state_enabled : udp_device.h
• Is_udd_all_banks_received : udp_device.h
• Is_udd_any_bank_received : udp_device.h
• Is_udd_any_wakeup : udp_device.h
• Is_udd_bank0_received : udp_device.h
• Is_udd_bank1_received : udp_device.h
• Is_udd_configured_state_enabled : udp_device.h
• Is_udd_crc_error : udp_device.h
• Is_udd_detached : udp_device.h
• Is_udd_endpoint_configured : udp_device.h
• Is_udd_endpoint_dma_supported : udp_device.h
• Is_udd_endpoint_enabled : udp_device.h
• Is_udd_endpoint_high_bw_supported : udp_device.h
• Is_udd_endpoint_in : udp_device.h
• Is_udd_endpoint_interrupt : udp_device.h
• Is_udd_endpoint_interrupt_enabled : udp_device.h
• Is_udd_endpoint_stall_pending : udp_device.h
• Is_udd_endpoint_stall_requested : udp_device.h
• Is_udd_endpoint_status_enabled : udp_device.h
• Is_udd_endpoint_status_error : udp_device.h
• Is_udd_endpoint_status_in : udp_device.h
• Is_udd_endpoint_status_rx_all : udp_device.h
• Is_udd_endpoint_status_rx_any_bank : udp_device.h
• Is_udd_endpoint_status_rx_bank0 : udp_device.h
• Is_udd_endpoint_status_rx_bank1 : udp_device.h
• Is_udd_endpoint_status_rx_setup : udp_device.h
• Is_udd_endpoint_status_stall_pending : udp_device.h
• Is_udd_endpoint_status_stall_sent : udp_device.h
• Is_udd_endpoint_status_stalled : udp_device.h
• Is_udd_endpoint_status_tx_complete : udp_device.h
• Is_udd_endpoint_status_tx_ready : udp_device.h
• Is_udd_endpoint_type_in : udp_device.h
• Is_udd_expected_wakeup : udp_device.h
• Is_udd_ext_resume : udp_device.h
• Is_udd_ext_resume_interrupt_enabled : udp_device.h
• Is_udd_frame_number_crc_error : udp_device.h
• Is_udd_in_pending : udp_device.h
• Is_udd_in_sent : udp_device.h
• Is_udd_pending_remote_wake_up : udp_device.h
• Is_udd_periph_ck_enabled : udp_device.h
• Is_udd_remote_wake_up_enabled : udp_device.h
• Is_udd_reset : udp_device.h
• Is_udd_resetting_endpoint : udp_device.h
• Is_udd_resume : udp_device.h
• Is_udd_resume_interrupt_enabled : udp_device.h
• Is_udd_setup_received : udp_device.h
• Is_udd_sof : udp_device.h
• Is_udd_sof_interrupt_enabled : udp_device.h
• Is_udd_stall : udp_device.h
• Is_udd_suspend : udp_device.h
• Is_udd_suspend_interrupt_enabled : udp_device.h
• Is_udd_transceiver_enabled : udp_device.h
• Is_udd_transmit_ready : udp_device.h
• Is_udd_vbus_high : udp_device.h
• Is_udd_vbus_low : udp_device.h
• Is_udd_wake_up : udp_device.h
• Is_udd_wake_up_interrupt_enabled : udp_device.h
• ISO7816_T_0 : usart.c
• ISO7816_T_1 : usart.c
• ISR : interrupt_sam_nvic.h