 Virtual Memory in RAM | The component manages a disk on a volatile memory (internal RAM) |
 Standard I/O (stdio) | Common standard I/O driver that implements the stdio read and write functions on AVR and SAM devices |
  Standard serial I/O (stdio) | Common standard serial I/O management driver that implements a stdio serial interface on AVR and SAM devices |
| USB device descriptors for a single interface | The following structures provide the USB device descriptors required for USB Device with a single interface MSC |
| Memory Control Access | Common abstraction layer for memory interfaces |
| Test Suite Framework | This module is the test suite framework, which provides a set of standard functions and macros for defining and running test suites |
| Compiler abstraction layer and code utilities | Compiler abstraction layer and code utilities for Cortex-M0+ based Atmel SAM devices |
| Status Codes | |
| Preprocessor - Macro Recursion | |
| Preprocessor - Macro Repeat | |
| Preprocessor - Stringize | |
| Preprocessor - Token Paste | |
| Global interrupt management | This is a driver for global enabling and disabling of interrupts |
| Deprecated interrupt definitions | |
| Atmel part identification macros | This collection of macros identify which series and families that the various Atmel parts belong to |
| AVR UC3 parts | |
| AVR XMEGA parts | |
| megaAVR parts | |
| SAM parts | |
| Serial Interface (Serial) | See Quick start guide for Serial Interface service |
| SAM Serial USART (SERCOM USART) Driver | This driver for Atmel® | SMART ARM®-based microcontrollers provides an interface for the configuration and management of the SERCOM module in its USART mode to transfer or receive USART data frames |
| SAM System (SYSTEM) Driver | This driver for Atmel® | SMART ARM®-based microcontrollers provides an interface for the configuration and management of the device's system relation functionality, necessary for the basic device operation |
| SAM System Clock Management (SYSTEM CLOCK) Driver | This driver for Atmel® | SMART ARM®-based microcontrollers provides an interface for the configuration and management of the device's clocking related functions |
| SAM System Interrupt (SYSTEM INTERRUPT) Driver | This driver for Atmel® | SMART ARM®-based microcontrollers provides an interface for the configuration and management of internal software and hardware interrupts/exceptions |
| SAM System Pin Multiplexer (SYSTEM PINMUX) Driver | This driver for Atmel® | SMART ARM®-based microcontrollers provides an interface for the configuration and management of the device's physical I/O Pins, to alter the direction and input/drive characteristics as well as to configure the pin peripheral multiplexer selection |
| Sleep manager | The sleep manager is a service for ensuring that the device is not put to sleep in deeper sleep modes than the system (e.g., peripheral drivers, services or the application) allows at any given time |
| SAM Universal Serial Bus (USB) | The Universal Serial Bus (USB) module complies with the USB 2.1 specification |
| SAM External Interrupt (EXTINT) Driver | This driver for Atmel® | SMART ARM®-based microcontrollers provides an interface for the configuration and management of external interrupts generated by the physical device pins, including edge detection |
| SAM Port (PORT) Driver | This driver for Atmel® | SMART ARM®-based microcontrollers provides an interface for the configuration and management of the device's General Purpose Input/Output (GPIO) pin functionality, for manual pin state reading and writing |
| USB Stack | This stack includes the USB Device Stack, USB Host Stack and common definitions |
| USB Stack Device | This module includes USB Stack Device implementation |
| USB Device Driver Implement (UDD) | USB low-level driver for USB device mode |
| USB Device Controller (UDC) | The UDC provides a high-level abstraction of the usb device |
| Implementation of UDC | Internal implementation |
| USB Device Controller (UDC) - Prerequisites | Common prerequisites for all USB devices |
| USB Device Controller (UDC) - Example code | Common example code for all USB devices |
| USB Device Controller (UDC) - Workflow | Common workflow for all USB devices |
| USB Device Descriptor | |
| USB Device Driver (UDD) | The UDD driver provides a low-level abstraction of the device controller hardware |
 USB Device Interface (UDI) | The UDI provides a common API for all classes, and this is used by UDC for the main control of USB Device interface |
 USB interface descriptors | The following structures provide predefined USB interface descriptors |
| Interface with USB Device Core (UDC) | Structures and functions required by UDC |
| Implementation of UDI MSC | Class internal implementation |
| USB dual role driver | USB low-level driver for dual role features |
| Atmel USB Identifiers | This module defines Atmel PID and VIDs constants |
| USB Protocol Definitions | This module defines constants and data structures provided by the USB 2.0 specification |
| USB Mass Storage Class (MSC) protocol definitions | |
| SCSI Block Commands protocol definitions | |
| SCSI Primary Commands protocol definitions | |
| Generic board support | The generic board support module includes board-specific definitions and function prototypes, such as the board initialization function |
| SAM L21 Xplained Pro board | |
| Features | Symbols that describe features and capabilities of the board |
1.8.5