SAM USB Driver.

#include <compiler.h>
#include <clock.h>
#include <gclk.h>
#include <pinmux.h>
#include <system_interrupt.h>

Data Structures
struct	usb_config
	USB configurations. More...

struct	usb_device_endpoint_config
	USB device endpoint configurations. More...

struct	usb_endpoint_callback_parameter
	USB device endpoint callback status parameter structure. More...

struct	usb_host_pipe_config
	USB host pipe configurations. More...

struct	usb_module
	USB software module instance structure. More...

struct	usb_pipe_callback_parameter
	USB host pipe callback status parameter structure. More...

Typedefs
Host Callback Functions Types
typedef void(*	usb_host_callback_t )(struct usb_module *module_inst)

typedef void(*	usb_host_pipe_callback_t )(struct usb_module module_inst, void )

Device Callback Functions Types
typedef void(*	usb_device_callback_t )(struct usb_module module_inst, void pointer)

typedef void(*	usb_device_endpoint_callback_t )(struct usb_module module_inst, void pointer)

Enumerations
enum	usb_device_callback { USB_DEVICE_CALLBACK_SOF, USB_DEVICE_CALLBACK_RESET, USB_DEVICE_CALLBACK_WAKEUP, USB_DEVICE_CALLBACK_RAMACER, USB_DEVICE_CALLBACK_SUSPEND, USB_DEVICE_CALLBACK_LPMNYET, USB_DEVICE_CALLBACK_LPMSUSP, USB_DEVICE_CALLBACK_N }
	Enumeration for the possible callback types for the USB in device module. More...

enum	usb_device_endpoint_callback { USB_DEVICE_ENDPOINT_CALLBACK_TRCPT, USB_DEVICE_ENDPOINT_CALLBACK_TRFAIL, USB_DEVICE_ENDPOINT_CALLBACK_RXSTP, USB_DEVICE_ENDPOINT_CALLBACK_STALL, USB_DEVICE_EP_CALLBACK_N }
	Enumeration for the possible callback types for the USB endpoint in device module. More...

enum	usb_device_endpoint_type { USB_DEVICE_ENDPOINT_TYPE_DISABLE, USB_DEVICE_ENDPOINT_TYPE_CONTROL, USB_DEVICE_ENDPOINT_TYPE_ISOCHRONOUS, USB_DEVICE_ENDPOINT_TYPE_BULK, USB_DEVICE_ENDPOINT_TYPE_INTERRUPT }
	Device Endpoint types. More...

enum	usb_device_lpm_mode { USB_DEVICE_LPM_NOT_SUPPORT, USB_DEVICE_LPM_ACK, USB_DEVICE_LPM_NYET }
	Link Power Management Handshake. More...

enum	usb_endpoint_size { USB_ENDPOINT_8_BYTE, USB_ENDPOINT_16_BYTE, USB_ENDPOINT_32_BYTE, USB_ENDPOINT_64_BYTE, USB_ENDPOINT_128_BYTE, USB_ENDPOINT_256_BYTE, USB_ENDPOINT_512_BYTE, USB_ENDPOINT_1023_BYTE }
	Endpoint Size. More...

enum	usb_host_callback { USB_HOST_CALLBACK_SOF, USB_HOST_CALLBACK_RESET, USB_HOST_CALLBACK_WAKEUP, USB_HOST_CALLBACK_DNRSM, USB_HOST_CALLBACK_UPRSM, USB_HOST_CALLBACK_RAMACER, USB_HOST_CALLBACK_CONNECT, USB_HOST_CALLBACK_DISCONNECT, USB_HOST_CALLBACK_N }
	Enum for the possible callback types for the USB in host module. More...

enum	usb_host_pipe_callback { USB_HOST_PIPE_CALLBACK_TRANSFER_COMPLETE, USB_HOST_PIPE_CALLBACK_ERROR, USB_HOST_PIPE_CALLBACK_SETUP, USB_HOST_PIPE_CALLBACK_STALL, USB_HOST_PIPE_CALLBACK_N }
	Enum for the possible callback types for the USB pipe in host module. More...

enum	usb_host_pipe_token { USB_HOST_PIPE_TOKEN_SETUP, USB_HOST_PIPE_TOKEN_IN, USB_HOST_PIPE_TOKEN_OUT }
	Host pipe token types. More...

enum	usb_host_pipe_type { USB_HOST_PIPE_TYPE_DISABLE, USB_HOST_PIPE_TYPE_CONTROL, USB_HOST_PIPE_TYPE_ISO, USB_HOST_PIPE_TYPE_BULK, USB_HOST_PIPE_TYPE_INTERRUPT, USB_HOST_PIPE_TYPE_EXTENDED }
	Host pipe types. More...

enum	usb_speed { USB_SPEED_LOW, USB_SPEED_FULL }
	Enum for the speed status for the USB module. More...

Functions
static void	usb_device_attach (struct usb_module *module_inst)
	Attach USB device to the bus. More...

static void	usb_device_detach (struct usb_module *module_inst)
	Detach USB device from the bus. More...

static uint8_t	usb_device_get_address (struct usb_module *module_inst)
	Get the address of USB device. More...

static uint16_t	usb_device_get_frame_number (struct usb_module *module_inst)
	Get the frame number of USB device. More...

static uint16_t	usb_device_get_micro_frame_number (struct usb_module *module_inst)
	Get the micro-frame number of USB device. More...

static enum usb_speed	usb_device_get_speed (struct usb_module *module_inst)
	Get the speed mode of USB device. More...

static void	usb_device_send_remote_wake_up (struct usb_module *module_inst)
	USB device send the resume wakeup. More...

static void	usb_device_set_address (struct usb_module *module_inst, uint8_t address)
	Set the speed mode of USB device. More...

static void	usb_device_set_lpm_mode (struct usb_module *module_inst, enum usb_device_lpm_mode lpm_mode)
	USB device set the LPM mode. More...

void	usb_disable (struct usb_module *module_inst)
	Disable the USB module peripheral. More...

void	usb_enable (struct usb_module *module_inst)
	Enable the USB module peripheral. More...

void	usb_get_config_defaults (struct usb_config *module_config)
	Get the default USB module settings. More...

static uint8_t	usb_get_state_machine_status (struct usb_module *module_inst)
	Get the status of USB module's state machine. More...

enum status_code	usb_init (struct usb_module module_inst, Usb const hw, struct usb_config *module_config)
	Initializes USB module instance. More...

USB Host Callback Management
enum status_code	usb_host_register_callback (struct usb_module *module_inst, enum usb_host_callback callback_type, usb_host_callback_t callback_func)
	Registers a USB host callback. More...

enum status_code	usb_host_unregister_callback (struct usb_module *module_inst, enum usb_host_callback callback_type)
	Unregisters a USB host callback. More...

enum status_code	usb_host_enable_callback (struct usb_module *module_inst, enum usb_host_callback callback_type)
	Enables USB host callback generation for a given type. More...

enum status_code	usb_host_disable_callback (struct usb_module *module_inst, enum usb_host_callback callback_type)
	Disables USB host callback generation for a given type. More...

USB Device Callback Management
enum status_code	usb_device_register_callback (struct usb_module *module_inst, enum usb_device_callback callback_type, usb_device_callback_t callback_func)
	Registers a USB device callback. More...

enum status_code	usb_device_unregister_callback (struct usb_module *module_inst, enum usb_device_callback callback_type)
	Unregisters a USB device callback. More...

enum status_code	usb_device_enable_callback (struct usb_module *module_inst, enum usb_device_callback callback_type)
	Enables USB device callback generation for a given type. More...

enum status_code	usb_device_disable_callback (struct usb_module *module_inst, enum usb_device_callback callback_type)
	Disables USB device callback generation for a given type. More...

USB Host Pipe Configuration
void	usb_host_pipe_get_config_defaults (struct usb_host_pipe_config *ep_config)
	Initializes an USB host pipe configuration structure to defaults. More...

enum status_code	usb_host_pipe_set_config (struct usb_module module_inst, uint8_t pipe_num, struct usb_host_pipe_config ep_config)
	Writes an USB host pipe configuration to the hardware module. More...

enum status_code	usb_host_pipe_get_config (struct usb_module module_inst, uint8_t pipe_num, struct usb_host_pipe_config ep_config)
	Gets an USB host pipe configuration. More...

USB Device Endpoint Configuration
void	usb_device_endpoint_get_config_defaults (struct usb_device_endpoint_config *ep_config)
	Initializes an USB device endpoint configuration structure to defaults. More...

enum status_code	usb_device_endpoint_set_config (struct usb_module module_inst, struct usb_device_endpoint_config ep_config)
	Writes an USB device endpoint configuration to the hardware module. More...

bool	usb_device_endpoint_is_configured (struct usb_module *module_inst, uint8_t ep)
	Check if current endpoint is configured. More...

USB Host Pipe Callback Management
enum status_code	usb_host_pipe_register_callback (struct usb_module *module_inst, uint8_t pipe_num, enum usb_host_pipe_callback callback_type, usb_host_pipe_callback_t callback_func)
	Registers a USB host pipe callback. More...

enum status_code	usb_host_pipe_unregister_callback (struct usb_module *module_inst, uint8_t pipe_num, enum usb_host_pipe_callback callback_type)
	Unregisters a USB host pipe callback. More...

enum status_code	usb_host_pipe_enable_callback (struct usb_module *module_inst, uint8_t pipe_num, enum usb_host_pipe_callback callback_type)
	Enables USB host pipe callback generation for a given type. More...

enum status_code	usb_host_pipe_disable_callback (struct usb_module *module_inst, uint8_t pipe_num, enum usb_host_pipe_callback callback_type)
	Disables USB host callback generation for a given type. More...

USB Device Endpoint Callback Management
enum status_code	usb_device_endpoint_register_callback (struct usb_module *module_inst, uint8_t ep_num, enum usb_device_endpoint_callback callback_type, usb_device_endpoint_callback_t callback_func)
	Registers a USB device endpoint callback. More...

enum status_code	usb_device_endpoint_unregister_callback (struct usb_module *module_inst, uint8_t ep_num, enum usb_device_endpoint_callback callback_type)
	Unregisters a USB device endpoint callback. More...

enum status_code	usb_device_endpoint_enable_callback (struct usb_module *module_inst, uint8_t ep, enum usb_device_endpoint_callback callback_type)
	Enables USB device endpoint callback generation for a given type. More...

enum status_code	usb_device_endpoint_disable_callback (struct usb_module *module_inst, uint8_t ep, enum usb_device_endpoint_callback callback_type)
	Disables USB device endpoint callback generation for a given type. More...

USB Host Pipe Job Management
enum status_code	usb_host_pipe_setup_job (struct usb_module module_inst, uint8_t pipe_num, uint8_t buf)
	Sends the setup package. More...

enum status_code	usb_host_pipe_read_job (struct usb_module module_inst, uint8_t pipe_num, uint8_t buf, uint32_t buf_size)
	USB host pipe read job. More...

enum status_code	usb_host_pipe_write_job (struct usb_module module_inst, uint8_t pipe_num, uint8_t buf, uint32_t buf_size)
	USB host pipe write job. More...

enum status_code	usb_host_pipe_abort_job (struct usb_module *module_inst, uint8_t pipe_num)
	USB host abort a pipe job. More...

enum status_code	usb_host_pipe_lpm_job (struct usb_module *module_inst, uint8_t pipe_num, bool b_remotewakeup, uint8_t hird)
	Sends the LPM package. More...

USB Device Endpoint Job Management
enum status_code	usb_device_endpoint_write_buffer_job (struct usb_module module_inst, uint8_t ep_num, uint8_t pbuf, uint32_t buf_size)
	Start write buffer job on a endpoint. More...

enum status_code	usb_device_endpoint_read_buffer_job (struct usb_module module_inst, uint8_t ep_num, uint8_t pbuf, uint32_t buf_size)
	Start read buffer job on a endpoint. More...

enum status_code	usb_device_endpoint_setup_buffer_job (struct usb_module module_inst, uint8_t pbuf)
	Start setup packet read job on a endpoint. More...

void	usb_device_endpoint_abort_job (struct usb_module *module_inst, uint8_t ep)
	Abort ongoing job on the endpoint. More...

USB Device Endpoint Operations
bool	usb_device_endpoint_is_halted (struct usb_module *module_inst, uint8_t ep)
	Check if endpoint is halted. More...

void	usb_device_endpoint_set_halt (struct usb_module *module_inst, uint8_t ep)
	Halt the endpoint (send STALL) More...

void	usb_device_endpoint_clear_halt (struct usb_module *module_inst, uint8_t ep)
	Clear endpoint halt state. More...

typedef void(* usb_device_callback_t)(struct usb_module *module_inst, void *pointer)

typedef void(* usb_device_endpoint_callback_t)(struct usb_module *module_inst, void *pointer)

typedef void(* usb_host_callback_t)(struct usb_module *module_inst)

typedef void(* usb_host_pipe_callback_t)(struct usb_module *module_inst, void *)

enum usb_device_callback

Enumeration for the possible callback types for the USB in device module.

Enumerator
USB_DEVICE_CALLBACK_SOF
USB_DEVICE_CALLBACK_RESET
USB_DEVICE_CALLBACK_WAKEUP
USB_DEVICE_CALLBACK_RAMACER
USB_DEVICE_CALLBACK_SUSPEND
USB_DEVICE_CALLBACK_LPMNYET
USB_DEVICE_CALLBACK_LPMSUSP
USB_DEVICE_CALLBACK_N

enum usb_device_endpoint_callback

Enumeration for the possible callback types for the USB endpoint in device module.

Enumerator
USB_DEVICE_ENDPOINT_CALLBACK_TRCPT
USB_DEVICE_ENDPOINT_CALLBACK_TRFAIL
USB_DEVICE_ENDPOINT_CALLBACK_RXSTP
USB_DEVICE_ENDPOINT_CALLBACK_STALL
USB_DEVICE_EP_CALLBACK_N

enum usb_device_endpoint_type

Device Endpoint types.

Enumerator
USB_DEVICE_ENDPOINT_TYPE_DISABLE
USB_DEVICE_ENDPOINT_TYPE_CONTROL
USB_DEVICE_ENDPOINT_TYPE_ISOCHRONOUS
USB_DEVICE_ENDPOINT_TYPE_BULK
USB_DEVICE_ENDPOINT_TYPE_INTERRUPT

enum usb_device_lpm_mode

Link Power Management Handshake.

Enumerator
USB_DEVICE_LPM_NOT_SUPPORT
USB_DEVICE_LPM_ACK
USB_DEVICE_LPM_NYET

enum usb_endpoint_size

Endpoint Size.

Enumerator
USB_ENDPOINT_8_BYTE
USB_ENDPOINT_16_BYTE
USB_ENDPOINT_32_BYTE
USB_ENDPOINT_64_BYTE
USB_ENDPOINT_128_BYTE
USB_ENDPOINT_256_BYTE
USB_ENDPOINT_512_BYTE
USB_ENDPOINT_1023_BYTE

enum usb_host_callback

Enum for the possible callback types for the USB in host module.

Enumerator
USB_HOST_CALLBACK_SOF
USB_HOST_CALLBACK_RESET
USB_HOST_CALLBACK_WAKEUP
USB_HOST_CALLBACK_DNRSM
USB_HOST_CALLBACK_UPRSM
USB_HOST_CALLBACK_RAMACER
USB_HOST_CALLBACK_CONNECT
USB_HOST_CALLBACK_DISCONNECT
USB_HOST_CALLBACK_N

enum usb_host_pipe_callback

Enum for the possible callback types for the USB pipe in host module.

Enumerator
USB_HOST_PIPE_CALLBACK_TRANSFER_COMPLETE
USB_HOST_PIPE_CALLBACK_ERROR
USB_HOST_PIPE_CALLBACK_SETUP
USB_HOST_PIPE_CALLBACK_STALL
USB_HOST_PIPE_CALLBACK_N

enum usb_host_pipe_token

Host pipe token types.

Enumerator
USB_HOST_PIPE_TOKEN_SETUP
USB_HOST_PIPE_TOKEN_IN
USB_HOST_PIPE_TOKEN_OUT

enum usb_host_pipe_type

Host pipe types.

Enumerator
USB_HOST_PIPE_TYPE_DISABLE
USB_HOST_PIPE_TYPE_CONTROL
USB_HOST_PIPE_TYPE_ISO
USB_HOST_PIPE_TYPE_BULK
USB_HOST_PIPE_TYPE_INTERRUPT
USB_HOST_PIPE_TYPE_EXTENDED

enum usb_speed

Enum for the speed status for the USB module.

Enumerator
USB_SPEED_LOW
USB_SPEED_FULL

static void usb_device_attach ( struct usb_module * module_inst )

inlinestatic

Attach USB device to the bus.

Parameters

module_inst Pointer to USB device module instance

References usb_module::hw.

static void usb_device_detach ( struct usb_module * module_inst )

inlinestatic

Detach USB device from the bus.

Parameters

module_inst Pointer to USB device module instance

References usb_module::hw.

enum status_code usb_device_disable_callback	(	struct usb_module *	module_inst,
		enum usb_device_callback	callback_type
	)

Disables USB device callback generation for a given type.

Disables asynchronous callbacks for a given logical type.

Parameters

[in]	module_inst	Pointer to USB software instance struct
[in]	callback_type	Callback type given by an enum

Returns: Status of the callback disable operation.

Return values

STATUS_OK The callback was disabled successfully.

References Assert, usb_module::device_enabled_callback_mask, usb_module::hw, and STATUS_OK.

enum status_code usb_device_enable_callback	(	struct usb_module *	module_inst,
		enum usb_device_callback	callback_type
	)

Enables USB device callback generation for a given type.

Enables asynchronous callbacks for a given logical type. This must be called before USB device generate callback events.

Parameters

[in]	module_inst	Pointer to USB software instance struct
[in]	callback_type	Callback type given by an enum

Returns: Status of the callback enable operation.

Return values

STATUS_OK The callback was enabled successfully.

References Assert, usb_module::device_enabled_callback_mask, usb_module::hw, and STATUS_OK.

void usb_device_endpoint_abort_job	(	struct usb_module *	module_inst,
		uint8_t	ep
	)

Abort ongoing job on the endpoint.

Parameters

module_inst	Pointer to USB software instance struct
ep	Endpoint address

References usb_module::hw, USB_EP_ADDR_MASK, and USB_EP_DIR_IN.

void usb_device_endpoint_clear_halt	(	struct usb_module *	module_inst,
		uint8_t	ep
	)

Clear endpoint halt state.

Parameters

module_inst	Pointer to USB software instance struct
ep	Endpoint address

References usb_module::hw, USB_EP_ADDR_MASK, and USB_EP_DIR_IN.

enum status_code usb_device_endpoint_disable_callback	(	struct usb_module *	module_inst,
		uint8_t	ep,
		enum usb_device_endpoint_callback	callback_type
	)

Disables USB device endpoint callback generation for a given type.

Disables callbacks for a given logical type.

Parameters

[in]	module_inst	Pointer to USB software instance struct
[in]	ep	Endpoint to configure
[in]	callback_type	Callback type given by an enum

Returns: Status of the callback disable operation.

Return values

STATUS_OK The callback was disabled successfully.

References Assert, usb_module::device_endpoint_enabled_callback_mask, usb_module::hw, STATUS_OK, USB_DEVICE_ENDPOINT_CALLBACK_RXSTP, USB_DEVICE_ENDPOINT_CALLBACK_STALL, USB_DEVICE_ENDPOINT_CALLBACK_TRCPT, USB_DEVICE_ENDPOINT_CALLBACK_TRFAIL, USB_EP_ADDR_MASK, and USB_EP_DIR_IN.

enum status_code usb_device_endpoint_enable_callback	(	struct usb_module *	module_inst,
		uint8_t	ep,
		enum usb_device_endpoint_callback	callback_type
	)

Enables USB device endpoint callback generation for a given type.

Enables callbacks for a given logical type. This must be called before USB device pipe generate callback events.

Parameters

[in]	module_inst	Pointer to USB software instance struct
[in]	ep	Endpoint to configure
[in]	callback_type	Callback type given by an enum

Returns: Status of the callback enable operation.

Return values

STATUS_OK The callback was enabled successfully.

References Assert, usb_module::device_endpoint_enabled_callback_mask, usb_module::hw, STATUS_OK, USB_DEVICE_ENDPOINT_CALLBACK_RXSTP, USB_DEVICE_ENDPOINT_CALLBACK_STALL, USB_DEVICE_ENDPOINT_CALLBACK_TRCPT, USB_DEVICE_ENDPOINT_CALLBACK_TRFAIL, USB_EP_ADDR_MASK, and USB_EP_DIR_IN.

void usb_device_endpoint_get_config_defaults ( struct usb_device_endpoint_config * ep_config )

Initializes an USB device endpoint configuration structure to defaults.

Initializes a given USB device endpoint configuration structure to a set of known default values. This function should be called on all new instances of these configuration structures before being modified by the user application.

The default configuration is as follows:

endpoint address is 0
endpoint size is 8 bytes
auto_zlp is false
endpoint type is control

Parameters

[out] ep_config Configuration structure to initialize to default values

References Assert, usb_device_endpoint_config::auto_zlp, usb_device_endpoint_config::ep_address, usb_device_endpoint_config::ep_size, usb_device_endpoint_config::ep_type, USB_DEVICE_ENDPOINT_TYPE_CONTROL, and USB_ENDPOINT_8_BYTE.

bool usb_device_endpoint_is_configured	(	struct usb_module *	module_inst,
		uint8_t	ep
	)

Check if current endpoint is configured.

Parameters

module_inst	Pointer to USB software instance struct
ep	Endpoint address (direction & number)

Returns: true if endpoint is configured and ready to use

References usb_module::hw, USB_DEVICE_ENDPOINT_TYPE_DISABLE, USB_EP_ADDR_MASK, and USB_EP_DIR_IN.

bool usb_device_endpoint_is_halted	(	struct usb_module *	module_inst,
		uint8_t	ep
	)

Check if endpoint is halted.

Parameters

module_inst	Pointer to USB software instance struct
ep	Endpoint address

Returns: true if the endpoint is halted

References usb_module::hw, USB_EP_ADDR_MASK, and USB_EP_DIR_IN.

enum status_code usb_device_endpoint_read_buffer_job	(	struct usb_module *	module_inst,
		uint8_t	ep_num,
		uint8_t *	pbuf,
		uint32_t	buf_size
	)

Start read buffer job on a endpoint.

Parameters

module_inst	Pointer to USB module instance
ep_num	Endpoint number
pbuf	Pointer to buffer
buf_size	Size of buffer

Returns: Status of procedure

Return values

STATUS_OK	Job started successfully
STATUS_ERR_DENIED	Endpoint is not ready

References Assert, usb_module::hw, STATUS_ERR_DENIED, STATUS_OK, usb_descriptor_table, and USB_DEVICE_ENDPOINT_TYPE_DISABLE.

enum status_code usb_device_endpoint_register_callback	(	struct usb_module *	module_inst,
		uint8_t	ep_num,
		enum usb_device_endpoint_callback	callback_type,
		usb_device_endpoint_callback_t	callback_func
	)

Registers a USB device endpoint callback.

Registers a callback function which is implemented by the user.

Note: The callback must be enabled by usb_device_endpoint_enable_callback, in order for the interrupt handler to call it when the conditions for the callback type is met.

Parameters

[in]	module_inst	Pointer to USB software instance struct
[in]	ep_num	Endpoint to configure
[in]	callback_type	Callback type given by an enum
[in]	callback_func	Pointer to callback function

Returns: Status of the registration operation.

Return values

STATUS_OK The callback was registered successfully.

References Assert, usb_module::device_endpoint_callback, usb_module::device_endpoint_registered_callback_mask, and STATUS_OK.

enum status_code usb_device_endpoint_set_config	(	struct usb_module *	module_inst,
		struct usb_device_endpoint_config *	ep_config
	)

Writes an USB device endpoint configuration to the hardware module.

Writes out a given configuration of an USB device endpoint configuration to the hardware module. If the pipe is already configured, the new configuration will replace the existing one.

Parameters

[in]	module_inst	Pointer to USB software instance struct
[in]	ep_config	Configuration settings for the endpoint

Returns: Status of the device endpoint configuration operation

Return values

STATUS_OK	The device endpoint was configured successfully
STATUS_ERR_DENIED	The endpoint address is already configured

References Assert, usb_device_endpoint_config::auto_zlp, usb_device_endpoint_config::ep_address, usb_device_endpoint_config::ep_size, usb_device_endpoint_config::ep_type, usb_module::hw, STATUS_ERR_DENIED, STATUS_OK, usb_descriptor_table, USB_DEVICE_ENDPOINT_TYPE_BULK, USB_DEVICE_ENDPOINT_TYPE_CONTROL, USB_DEVICE_ENDPOINT_TYPE_DISABLE, USB_DEVICE_ENDPOINT_TYPE_INTERRUPT, USB_DEVICE_ENDPOINT_TYPE_ISOCHRONOUS, USB_EP_ADDR_MASK, and USB_EP_DIR_IN.

void usb_device_endpoint_set_halt	(	struct usb_module *	module_inst,
		uint8_t	ep
	)

Halt the endpoint (send STALL)

Parameters

module_inst	Pointer to USB software instance struct
ep	Endpoint address

References usb_module::hw, USB_EP_ADDR_MASK, and USB_EP_DIR_IN.

enum status_code usb_device_endpoint_setup_buffer_job	(	struct usb_module *	module_inst,
		uint8_t *	pbuf
	)

Start setup packet read job on a endpoint.

Parameters

module_inst	Pointer to USB device module instance
pbuf	Pointer to buffer

Returns: Status of procedure

Return values

STATUS_OK	Job started successfully
STATUS_ERR_DENIED	Endpoint is not ready

References Assert, usb_module::hw, STATUS_OK, and usb_descriptor_table.

enum status_code usb_device_endpoint_unregister_callback	(	struct usb_module *	module_inst,
		uint8_t	ep_num,
		enum usb_device_endpoint_callback	callback_type
	)

Unregisters a USB device endpoint callback.

Unregisters an callback implemented by the user. Removing it from the internal callback registration table.

Parameters

[in]	module_inst	Pointer to USB software instance struct
[in]	ep_num	Endpoint to configure
[in]	callback_type	Callback type given by an enum

Returns: Status of the de-registration operation.

Return values

STATUS_OK The callback was unregistered successfully.

References Assert, usb_module::device_endpoint_callback, usb_module::device_endpoint_registered_callback_mask, and STATUS_OK.

enum status_code usb_device_endpoint_write_buffer_job	(	struct usb_module *	module_inst,
		uint8_t	ep_num,
		uint8_t *	pbuf,
		uint32_t	buf_size
	)

Start write buffer job on a endpoint.

Parameters

module_inst	Pointer to USB module instance
ep_num	Endpoint number
pbuf	Pointer to buffer
buf_size	Size of buffer

Returns: Status of procedure

Return values

STATUS_OK	Job started successfully
STATUS_ERR_DENIED	Endpoint is not ready

References Assert, usb_module::hw, STATUS_ERR_DENIED, STATUS_OK, usb_descriptor_table, and USB_DEVICE_ENDPOINT_TYPE_DISABLE.

static uint8_t usb_device_get_address ( struct usb_module * module_inst )

inlinestatic

Get the address of USB device.

Parameters

module_inst Pointer to USB device module instance

Returns: USB device address value.

References usb_module::hw.

static uint16_t usb_device_get_frame_number ( struct usb_module * module_inst )

inlinestatic

Get the frame number of USB device.

Parameters

module_inst Pointer to USB device module instance

Returns: USB device frame number value.

References usb_module::hw.

static uint16_t usb_device_get_micro_frame_number ( struct usb_module * module_inst )

inlinestatic

Get the micro-frame number of USB device.

Parameters

module_inst Pointer to USB device module instance

Returns: USB device micro-frame number value.

References usb_module::hw.

static enum usb_speed usb_device_get_speed ( struct usb_module * module_inst )

inlinestatic

Get the speed mode of USB device.

Parameters

module_inst Pointer to USB device module instance

Returns: USB Speed mode (usb_speed).

References usb_module::hw, USB_SPEED_FULL, and USB_SPEED_LOW.

enum status_code usb_device_register_callback	(	struct usb_module *	module_inst,
		enum usb_device_callback	callback_type,
		usb_device_callback_t	callback_func
	)

Registers a USB device callback.

Registers a callback function which is implemented by the user.

Note: The callback must be enabled by usb_device_enable_callback, in order for the interrupt handler to call it when the conditions for the callback type is met.

Parameters

[in]	module_inst	Pointer to USB software instance struct
[in]	callback_type	Callback type given by an enum
[in]	callback_func	Pointer to callback function

Returns: Status of the registration operation.

Return values

STATUS_OK The callback was registered successfully.

References Assert, usb_module::device_callback, usb_module::device_registered_callback_mask, and STATUS_OK.

static void usb_device_send_remote_wake_up ( struct usb_module * module_inst )

inlinestatic

USB device send the resume wakeup.

Parameters

module_inst Pointer to USB device module instance

References usb_module::hw.

static void usb_device_set_address	(	struct usb_module *	module_inst,
		uint8_t	address
	)

inlinestatic

Set the speed mode of USB device.

Parameters

module_inst	Pointer to USB device module instance
address	USB device address value

References usb_module::hw.

static void usb_device_set_lpm_mode	(	struct usb_module *	module_inst,
		enum usb_device_lpm_mode	lpm_mode
	)

inlinestatic

USB device set the LPM mode.

Parameters

module_inst	Pointer to USB device module instance
lpm_mode	LPM mode

References usb_module::hw.

enum status_code usb_device_unregister_callback	(	struct usb_module *	module_inst,
		enum usb_device_callback	callback_type
	)

Unregisters a USB device callback.

Unregisters an asynchronous callback implemented by the user. Removing it from the internal callback registration table.

Parameters

[in]	module_inst	Pointer to USB software instance struct
[in]	callback_type	Callback type given by an enum

Returns: Status of the de-registration operation.

Return values

STATUS_OK The callback was unregistered successfully.

References Assert, usb_module::device_callback, usb_module::device_registered_callback_mask, and STATUS_OK.

void usb_disable ( struct usb_module * module_inst )

Disable the USB module peripheral.

Parameters

module_inst pointer to USB module instance

References Assert, and usb_module::hw.

void usb_enable ( struct usb_module * module_inst )

Enable the USB module peripheral.

Parameters

module_inst pointer to USB module instance

References Assert, and usb_module::hw.

Referenced by uhd_enable().

void usb_get_config_defaults ( struct usb_config * module_config )

Get the default USB module settings.

Parameters

[out] module_config Configuration structure to initialize to default values

References Assert, GCLK_GENERATOR_3, usb_config::run_in_standby, usb_config::select_host_mode, usb_config::source_generator, usb_config::speed_mode, and USB_SPEED_FULL.

Referenced by uhd_enable().

static uint8_t usb_get_state_machine_status ( struct usb_module * module_inst )

inlinestatic

Get the status of USB module's state machine.

Parameters

module_inst Pointer to USB module instance

References Assert, and usb_module::hw.

Referenced by _uhd_sof_interrupt().

enum status_code usb_host_disable_callback	(	struct usb_module *	module_inst,
		enum usb_host_callback	callback_type
	)

Disables USB host callback generation for a given type.

Disables asynchronous callbacks for a given logical type.

Parameters

[in]	module_inst	Pointer to USB software instance struct
[in]	callback_type	Callback type given by an enum

Returns: Status of the callback disable operation.

Return values

STATUS_OK The callback was disabled successfully.

References Assert, usb_module::hw, STATUS_OK, USB_HOST_CALLBACK_CONNECT, USB_HOST_CALLBACK_DISCONNECT, USB_HOST_CALLBACK_DNRSM, USB_HOST_CALLBACK_RAMACER, USB_HOST_CALLBACK_RESET, USB_HOST_CALLBACK_SOF, USB_HOST_CALLBACK_UPRSM, and USB_HOST_CALLBACK_WAKEUP.

Referenced by _uhd_connect(), _uhd_disconnect(), _uhd_downstream_resume(), _uhd_upstream_resume(), _uhd_wakeup(), and uhd_disable().

enum status_code usb_host_enable_callback	(	struct usb_module *	module_inst,
		enum usb_host_callback	callback_type
	)

Enables USB host callback generation for a given type.

Enables asynchronous callbacks for a given logical type. This must be called before USB host generate callback events.

Parameters

[in]	module_inst	Pointer to USB software instance struct
[in]	callback_type	Callback type given by an enum

Returns: Status of the callback enable operation.

Return values

STATUS_OK The callback was enabled successfully.

References Assert, usb_module::hw, STATUS_OK, USB_HOST_CALLBACK_CONNECT, USB_HOST_CALLBACK_DISCONNECT, USB_HOST_CALLBACK_DNRSM, USB_HOST_CALLBACK_RAMACER, USB_HOST_CALLBACK_RESET, USB_HOST_CALLBACK_SOF, USB_HOST_CALLBACK_UPRSM, and USB_HOST_CALLBACK_WAKEUP.

Referenced by _uhd_connect(), _uhd_disconnect(), _uhd_ep0_transfer_complete(), _uhd_sof_interrupt(), and uhd_enable().

enum status_code usb_host_pipe_abort_job	(	struct usb_module *	module_inst,
		uint8_t	pipe_num
	)

USB host abort a pipe job.

USB host pipe abort job by freeze the pipe.

Parameters

[in]	module_inst	Pointer to USB software instance struct
[in]	pipe_num	Pipe to configure

Returns: Status of the setting operation.

Return values

STATUS_OK	The abort job was set successfully.
STATUS_ERR_NOT_INITIALIZED	The pipe has not been configured.

References Assert, usb_module::hw, STATUS_ERR_NOT_INITIALIZED, STATUS_OK, and USB_HOST_PIPE_TYPE_DISABLE.

enum status_code usb_host_pipe_disable_callback	(	struct usb_module *	module_inst,
		uint8_t	pipe_num,
		enum usb_host_pipe_callback	callback_type
	)

Disables USB host callback generation for a given type.

Disables asynchronous callbacks for a given logical type.

Parameters

[in]	module_inst	Pointer to USB software instance struct
[in]	pipe_num	Pipe to configure
[in]	callback_type	Callback type given by an enum

Returns: Status of the callback disable operation.

Return values

STATUS_OK The callback was disabled successfully.

References Assert, usb_module::hw, STATUS_OK, USB_HOST_PIPE_CALLBACK_ERROR, USB_HOST_PIPE_CALLBACK_SETUP, USB_HOST_PIPE_CALLBACK_STALL, and USB_HOST_PIPE_CALLBACK_TRANSFER_COMPLETE.

enum status_code usb_host_pipe_enable_callback	(	struct usb_module *	module_inst,
		uint8_t	pipe_num,
		enum usb_host_pipe_callback	callback_type
	)

Enables USB host pipe callback generation for a given type.

Enables asynchronous callbacks for a given logical type. This must be called before USB host pipe generate callback events.

Parameters

[in]	module_inst	Pointer to USB software instance struct
[in]	pipe_num	Pipe to configure
[in]	callback_type	Callback type given by an enum

Returns: Status of the callback enable operation.

Return values

STATUS_OK The callback was enabled successfully.

References Assert, usb_module::hw, STATUS_OK, USB_HOST_PIPE_CALLBACK_ERROR, USB_HOST_PIPE_CALLBACK_SETUP, USB_HOST_PIPE_CALLBACK_STALL, and USB_HOST_PIPE_CALLBACK_TRANSFER_COMPLETE.

Referenced by _uhd_ctrl_phase_setup(), _uhd_pipe_trans_complete(), uhd_ep0_alloc(), and uhd_ep_alloc().

enum status_code usb_host_pipe_get_config	(	struct usb_module *	module_inst,
		uint8_t	pipe_num,
		struct usb_host_pipe_config *	ep_config
	)

Gets an USB host pipe configuration.

Gets out the configuration of an USB host pipe from the hardware module.

Parameters

[in]	module_inst	Pointer to USB software instance struct
[in]	pipe_num	Pipe to configure
[out]	ep_config	Configuration settings for the pipe

Returns: Status of the get host pipe configuration operation.

Return values

STATUS_OK The host pipe configuration was read successfully.

References Assert, usb_host_pipe_config::binterval, usb_host_pipe_config::device_address, usb_host_pipe_config::endpoint_address, usb_module::hw, usb_host_pipe_config::pipe_type, usb_host_pipe_config::size, STATUS_OK, usb_descriptor_table, USB_EP_DIR_IN, and USB_HOST_PIPE_TOKEN_IN.

Referenced by _uhd_ctrl_phase_data_in(), _uhd_ctrl_phase_data_in_start(), _uhd_ctrl_phase_data_out(), _uhd_ctrl_phase_setup(), _uhd_ctrl_request_end(), _uhd_ep0_error(), _uhd_ep0_stall(), _uhd_ep0_transfer_complete(), _uhd_get_pipe(), _uhd_pipe_finish_job(), _uhd_pipe_trans_complete(), uhd_ep_alloc(), uhd_ep_free(), and uhd_resume().

void usb_host_pipe_get_config_defaults ( struct usb_host_pipe_config * ep_config )

Initializes an USB host pipe configuration structure to defaults.

Initializes a given USB host pipe configuration structure to a set of known default values. This function should be called on all new instances of these configuration structures before being modified by the user application.

The default configuration is as follows:

device address is 0
endpoint address is 0
pipe type is control
interval is 0
pipe size is 8

Parameters

[out] ep_config Configuration structure to initialize to default values

References Assert, usb_host_pipe_config::binterval, usb_host_pipe_config::device_address, usb_host_pipe_config::endpoint_address, usb_host_pipe_config::pipe_type, usb_host_pipe_config::size, and USB_HOST_PIPE_TYPE_CONTROL.

Referenced by uhd_ep0_alloc(), and uhd_ep_alloc().

enum status_code usb_host_pipe_lpm_job	(	struct usb_module *	module_inst,
		uint8_t	pipe_num,
		bool	b_remotewakeup,
		uint8_t	hird
	)

Sends the LPM package.

Parameters

[in]	module_inst	Pointer to USB software instance struct
[in]	pipe_num	Pipe to configure
[in]	b_remotewakeup	Remote wake up flag
[in]	hird	Host Initiated Resume Duration

Returns: Status of the setup operation.

Return values

STATUS_OK	The setup job was set successfully.
STATUS_BUSY	The pipe is busy.
STATUS_ERR_NOT_INITIALIZED	The pipe has not been configured.

References Assert, usb_module::hw, STATUS_BUSY, STATUS_ERR_NOT_INITIALIZED, STATUS_OK, usb_descriptor_table, USB_HOST_PIPE_TYPE_DISABLE, USB_HOST_PIPE_TYPE_EXTENDED, USB_LPM_ATTRIBUT_BLINKSTATE_L1, USB_LPM_ATTRIBUT_HIRD, and USB_LPM_ATTRIBUT_REMOTEWAKE.

Referenced by uhd_suspend_lpm().

enum status_code usb_host_pipe_read_job	(	struct usb_module *	module_inst,
		uint8_t	pipe_num,
		uint8_t *	buf,
		uint32_t	buf_size
	)

USB host pipe read job.

USB host pipe read job by set and start an in transaction transfer.

Parameters

[in]	module_inst	Pointer to USB software instance struct
[in]	pipe_num	Pipe to configure
[in]	buf	Pointer to data buffer
[in]	buf_size	Data buffer size

Note: The buffer length should not larger than 0x3FFF

Returns: Status of the setting operation.

Return values

STATUS_OK	The read job was set successfully.
STATUS_BUSY	The pipe is busy.
STATUS_ERR_NOT_INITIALIZED	The pipe has not been configured.

References Assert, usb_module::hw, STATUS_BUSY, STATUS_ERR_NOT_INITIALIZED, STATUS_OK, usb_descriptor_table, USB_HOST_PIPE_TOKEN_IN, and USB_HOST_PIPE_TYPE_DISABLE.

Referenced by _uhd_ctrl_phase_data_in(), _uhd_ctrl_phase_data_in_start(), _uhd_ctrl_phase_zlp_in(), and _uhd_pipe_trans_complete().

enum status_code usb_host_pipe_register_callback	(	struct usb_module *	module_inst,
		uint8_t	pipe_num,
		enum usb_host_pipe_callback	callback_type,
		usb_host_pipe_callback_t	callback_func
	)

Registers a USB host pipe callback.

Registers a callback function which is implemented by the user.

Note: The callback must be enabled by usb_host_pipe_enable_callback, in order for the interrupt handler to call it when the conditions for the callback type is met.

Parameters

[in]	module_inst	Pointer to USB software instance struct
[in]	pipe_num	Pipe to configure
[in]	callback_type	Callback type given by an enum
[in]	callback_func	Pointer to callback function

Returns: Status of the registration operation.

Return values

STATUS_OK The callback was registered successfully.

References Assert, and STATUS_OK.

Referenced by uhd_ep0_alloc(), and uhd_ep_alloc().

enum status_code usb_host_pipe_set_config	(	struct usb_module *	module_inst,
		uint8_t	pipe_num,
		struct usb_host_pipe_config *	ep_config
	)

Writes an USB host pipe configuration to the hardware module.

Writes out a given configuration of an USB host pipe configuration to the hardware module. If the pipe is already configured, the new configuration will replace the existing one.

Parameters

[in]	module_inst	Pointer to USB software instance struct
[in]	pipe_num	Pipe to configure
[in]	ep_config	Configuration settings for the pipe

Returns: Status of the host pipe configuration operation.

Return values

STATUS_OK The host pipe was configured successfully.

References Assert, usb_host_pipe_config::binterval, clz, usb_host_pipe_config::device_address, usb_host_pipe_config::endpoint_address, usb_module::hw, max, min, usb_host_pipe_config::pipe_type, usb_host_pipe_config::size, STATUS_OK, UHD_BULK_INTERVAL_MIN, usb_descriptor_table, USB_EP_ADDR_MASK, USB_EP_DIR_IN, USB_HOST_PIPE_TOKEN_IN, USB_HOST_PIPE_TOKEN_OUT, USB_HOST_PIPE_TOKEN_SETUP, and USB_HOST_PIPE_TYPE_BULK.

Referenced by _uhd_ep0_error(), _uhd_ep0_stall(), _uhd_ep0_transfer_complete(), uhd_ep0_alloc(), and uhd_ep_alloc().

enum status_code usb_host_pipe_setup_job	(	struct usb_module *	module_inst,
		uint8_t	pipe_num,
		uint8_t *	buf
	)

Sends the setup package.

Parameters

[in]	module_inst	Pointer to USB software instance struct
[in]	pipe_num	Pipe to configure
[in]	buf	Pointer to data buffer

Returns: Status of the setup operation.

Return values

STATUS_OK	The setup job was set successfully.
STATUS_BUSY	The pipe is busy.
STATUS_ERR_NOT_INITIALIZED	The pipe has not been configured.

References Assert, usb_module::hw, STATUS_BUSY, STATUS_ERR_NOT_INITIALIZED, STATUS_OK, usb_descriptor_table, USB_HOST_PIPE_TOKEN_SETUP, and USB_HOST_PIPE_TYPE_DISABLE.

Referenced by _uhd_ctrl_phase_setup().

enum status_code usb_host_pipe_unregister_callback	(	struct usb_module *	module_inst,
		uint8_t	pipe_num,
		enum usb_host_pipe_callback	callback_type
	)

Unregisters a USB host pipe callback.

Unregisters an asynchronous callback implemented by the user. Removing it from the internal callback registration table.

Parameters

[in]	module_inst	Pointer to USB software instance struct
[in]	pipe_num	Pipe to configure
[in]	callback_type	Callback type given by an enum

Returns: Status of the de-registration operation.

Return values

STATUS_OK The callback was unregistered successfully.

References Assert, and STATUS_OK.

enum status_code usb_host_pipe_write_job	(	struct usb_module *	module_inst,
		uint8_t	pipe_num,
		uint8_t *	buf,
		uint32_t	buf_size
	)

USB host pipe write job.

USB host pipe write job by set and start an out transaction transfer.

Parameters

[in]	module_inst	Pointer to USB software instance struct
[in]	pipe_num	Pipe to configure
[in]	buf	Pointer to data buffer
[in]	buf_size	Data buffer size

Note: The buffer length should not larger than 0x3FFF

Returns: Status of the setting operation.

Return values

STATUS_OK	The write job was set successfully.
STATUS_BUSY	The pipe is busy.
STATUS_ERR_NOT_INITIALIZED	The pipe has not been configured.

References Assert, usb_module::hw, STATUS_BUSY, STATUS_ERR_NOT_INITIALIZED, STATUS_OK, usb_descriptor_table, USB_HOST_PIPE_TOKEN_OUT, and USB_HOST_PIPE_TYPE_DISABLE.

Referenced by _uhd_ctrl_phase_data_out(), _uhd_ctrl_phase_zlp_out(), and _uhd_pipe_trans_complete().

enum status_code usb_host_register_callback	(	struct usb_module *	module_inst,
		enum usb_host_callback	callback_type,
		usb_host_callback_t	callback_func
	)

Registers a USB host callback.

Registers a callback function which is implemented by the user.

Note: The callback must be enabled by usb_host_enable_callback, in order for the interrupt handler to call it when the conditions for the callback type is met.

Parameters

[in]	module_inst	Pointer to USB software instance struct
[in]	callback_type	Callback type given by an enum
[in]	callback_func	Pointer to callback function

Returns: Status of the registration operation.

Return values

STATUS_OK The callback was registered successfully.

References Assert, and STATUS_OK.

Referenced by uhd_enable().

enum status_code usb_host_unregister_callback	(	struct usb_module *	module_inst,
		enum usb_host_callback	callback_type
	)

Unregisters a USB host callback.

Unregisters an asynchronous callback implemented by the user. Removing it from the internal callback registration table.

Parameters

[in]	module_inst	Pointer to USB software instance struct
[in]	callback_type	Callback type given by an enum

Returns: Status of the de-registration operation.

Return values

STATUS_OK The callback was unregistered successfully.

References Assert, and STATUS_OK.

enum status_code usb_init	(	struct usb_module *	module_inst,
		Usb *const	hw,
		struct usb_config *	module_config
	)

Initializes USB module instance.

Enables the clock and initializes the USB module, based on the given configuration values.

Parameters

[in,out]	module_inst	Pointer to the software module instance struct
[in]	hw	Pointer to the USB hardware module
[in]	module_config	Pointer to the USB configuration options struct

Returns: Status of the initialization procedure.

Return values

STATUS_OK The module was initialized successfully

References Assert, usb_module::device_callback, usb_module::device_enabled_callback_mask, usb_module::device_endpoint_callback, usb_module::device_endpoint_enabled_callback_mask, usb_module::device_endpoint_registered_callback_mask, usb_module::device_registered_callback_mask, usb_module::hw, system_pinmux_config::mux_position, NVM_USB_PAD_TRANSN_POS, NVM_USB_PAD_TRANSN_SIZE, NVM_USB_PAD_TRANSP_POS, NVM_USB_PAD_TRANSP_SIZE, NVM_USB_PAD_TRIM_POS, NVM_USB_PAD_TRIM_SIZE, usb_config::run_in_standby, usb_config::select_host_mode, system_gclk_chan_config::source_generator, usb_config::source_generator, usb_config::speed_mode, STATUS_OK, system_apb_clock_set_mask(), SYSTEM_CLOCK_APB_APBB, system_gclk_chan_enable(), system_gclk_chan_get_config_defaults(), system_gclk_chan_set_config(), system_interrupt_enable(), SYSTEM_INTERRUPT_MODULE_USB, system_pinmux_get_config_defaults(), system_pinmux_pin_set_config(), usb_descriptor_table, USB_DEVICE_CALLBACK_N, USB_DEVICE_EP_CALLBACK_N, USB_HOST_CALLBACK_N, USB_HOST_PIPE_CALLBACK_N, USB_SPEED_FULL, and USB_SPEED_LOW.

Referenced by uhd_enable().

Microchip® Advanced Software Framework

Data Structures

Typedefs

Enumerations

Functions