Here is a list of all functions, variables, defines, enums, and typedefs with links to the files they belong to:

- p -

• PASS : compiler.h
• pcl_configure_clocks() : power_clocks_lib.c , power_clocks_lib.h
• pcl_configure_clocks_dfll0() : power_clocks_lib.c , power_clocks_lib.h
• pcl_configure_clocks_osc0() : power_clocks_lib.c , power_clocks_lib.h
• pcl_configure_clocks_rc120m() : power_clocks_lib.c , power_clocks_lib.h
• pcl_configure_clocks_rcsys() : power_clocks_lib.c , power_clocks_lib.h
• pcl_configure_clocks_uc3l() : power_clocks_lib.c
• pcl_configure_synchronous_clocks() : power_clocks_lib.c
• pcl_configure_usb_clock() : power_clocks_lib.c , power_clocks_lib.h
• PCL_DFLL0 : power_clocks_lib.h
• PCL_DFLL1 : power_clocks_lib.h
• pcl_dfll_t : power_clocks_lib.h
• pcl_disable_module : power_clocks_lib.h
• pcl_enable_module : power_clocks_lib.h
• pcl_freq_param_t : power_clocks_lib.h
• pcl_mainclk_t : power_clocks_lib.h
• PCL_MC_CRIPOSC : power_clocks_lib.h
• PCL_MC_DFLL0 : power_clocks_lib.h
• PCL_MC_DFLL1 : power_clocks_lib.h
• PCL_MC_OSC0 : power_clocks_lib.h
• PCL_MC_OSC0_PLL0 : power_clocks_lib.h
• PCL_MC_OSC0_PLL1 : power_clocks_lib.h
• PCL_MC_OSC1 : power_clocks_lib.h
• PCL_MC_OSC1_PLL0 : power_clocks_lib.h
• PCL_MC_OSC1_PLL1 : power_clocks_lib.h
• PCL_MC_RC120M : power_clocks_lib.h
• PCL_MC_RC8M : power_clocks_lib.h
• PCL_MC_RCSYS : power_clocks_lib.h
• PCL_NOT_SUPPORTED : power_clocks_lib.h
• PCL_OSC0 : power_clocks_lib.h
• PCL_OSC1 : power_clocks_lib.h
• pcl_osc_t : power_clocks_lib.h
• pcl_read_gplp() : power_clocks_lib.h
• pcl_switch_to_osc() : power_clocks_lib.c , power_clocks_lib.h
• pcl_write_gplp() : power_clocks_lib.h
• PGM_READ_BLOCK : compiler.h
• PGM_READ_BYTE : compiler.h
• PGM_READ_WORD : compiler.h
• pll_config_clear_option() : uc3b0_b1/pll.h
• pll_config_defaults : uc3b0_b1/pll.h
• pll_config_init() : uc3b0_b1/pll.h
• pll_config_read() : uc3b0_b1/pll.h
• pll_config_set_option() : uc3b0_b1/pll.h
• pll_config_write() : uc3b0_b1/pll.h
• pll_disable() : uc3b0_b1/pll.h
• pll_enable() : uc3b0_b1/pll.h
• pll_enable_config_defaults() : uc3b0_b1/pll.h
• pll_enable_source() : uc3b0_b1/pll.h
• pll_get_default_rate : uc3b0_b1/pll.h
• pll_is_locked() : uc3b0_b1/pll.h
• PLL_MAX_HZ : uc3b0_b1/pll.h
• PLL_MAX_STARTUP_CYCLES : uc3b0_b1/pll.h
• PLL_MIN_HZ : uc3b0_b1/pll.h
• PLL_NR_OPTIONS : uc3b0_b1/pll.h
• PLL_NR_SOURCES : uc3b0_b1/pll.h
• PLL_OPT_OUTPUT_DIV : uc3b0_b1/pll.h
• PLL_OPT_VCO_RANGE_LOW : uc3b0_b1/pll.h
• PLL_OPT_WBM_DISABLE : uc3b0_b1/pll.h
• pll_source : uc3b0_b1/pll.h
• PLL_SRC_OSC0 : uc3b0_b1/pll.h
• PLL_SRC_OSC1 : uc3b0_b1/pll.h
• PLL_TIMEOUT_MS : uc3b0_b1/pll.h
• PLL_VCO_LOW_THRESHOLD : uc3b0_b1/pll.h
• pll_wait_for_lock() : pll.h
• pm_asyn_wake_up_disable() : pm.h
• pm_asyn_wake_up_enable() : pm.h
• pm_bod_clear_irq() : pm.c , pm.h
• pm_bod_disable_irq() : pm.c , pm.h
• pm_bod_enable_irq() : pm.c , pm.h
• pm_bod_get_irq_enable_bit() : pm.c , pm.h
• pm_bod_get_irq_status() : pm.c , pm.h
• pm_bod_get_level() : pm.c , pm.h
• pm_cksel() : pm.c , pm.h
• pm_cksel_get() : pm.c , pm.h
• pm_cksel_set() : pm.c , pm.h
• pm_configure_clocks() : pm_conf_clocks.c , pm.h
• pm_configure_usb_clock() : pm.h , pm_conf_clocks.c
• pm_disable_clk0() : pm.c , pm.h
• pm_disable_clk1() : pm.c , pm.h
• pm_disable_clk32() : pm.c , pm.h
• pm_disable_module() : pm.h , pm.c
• pm_enable_clk0() : pm.c , pm.h
• pm_enable_clk0_no_wait() : pm.h , pm.c
• pm_enable_clk1() : pm.c , pm.h
• pm_enable_clk1_no_wait() : pm.h , pm.c
• pm_enable_clk32() : pm.c , pm.h
• pm_enable_clk32_no_wait() : pm.c , pm.h
• pm_enable_module() : pm.c , pm.h
• pm_enable_osc0_crystal() : pm.h , pm.c
• pm_enable_osc0_ext_clock() : pm.c , pm.h
• pm_enable_osc1_crystal() : pm.c , pm.h
• pm_enable_osc1_ext_clock() : pm.h , pm.c
• pm_enable_osc32_crystal() : pm.h , pm.c
• pm_enable_osc32_ext_clock() : pm.c , pm.h
• PM_FREQ_STATUS_FAIL : pm.h
• PM_FREQ_STATUS_OK : pm.h
• pm_gc_disable() : pm.c , pm.h
• pm_gc_enable() : pm.h , pm.c
• pm_gc_setup() : pm.c , pm.h
• pm_get_clock() : pm.c , pm.h
• pm_get_reset_cause() : pm.h
• PM_MAX_MUL : pm_conf_clocks.c
• pm_pll_disable() : pm.c , pm.h
• pm_pll_enable() : pm.h , pm.c
• pm_pll_get_option() : pm.h , pm.c
• pm_pll_set_option() : pm.c , pm.h
• pm_pll_setup() : pm.h , pm.c
• pm_read_gplp() : pm.c , pm.h
• pm_set_osc0_mode() : pm.c
• pm_set_osc1_mode() : pm.c
• pm_set_osc32_mode() : pm.c
• pm_sleep() : sleep.h
• pm_switch_to_clock() : pm.h , pm.c
• pm_switch_to_osc0() : pm.h , pm.c
• pm_wait_for_clk0_ready() : pm.h , pm.c
• pm_wait_for_clk1_ready() : pm.h , pm.c
• pm_wait_for_clk32_ready() : pm.c , pm.h
• pm_wait_for_pll0_locked() : pm.c , pm.h
• pm_wait_for_pll1_locked() : pm.h , pm.c
• pm_write_gplp() : pm.c , pm.h
• PROGRAM_START_ADDRESS : trampoline_uc3.h
• PROGRAM_START_OFFSET : trampoline_uc3.h
• PROTOCOL_IAD : usb_protocol.h
• ptr_get : stdio_usb.h , read.c
• ptr_put : stdio_usb.h , write.c