conf_test.h File Reference

SAM R30 Module Xplained Pro test configuration.

Copyright (c) 2018 Microchip Technology Inc. and its subsidiaries.

Macros
#define	CONF_RX_USART   SERCOM1
#define	CONF_RX_USART_PINMUX_PAD0   PINMUX_PA16C_SERCOM1_PAD0
#define	CONF_RX_USART_PINMUX_PAD1   PINMUX_PA17C_SERCOM1_PAD1
#define	CONF_RX_USART_PINMUX_PAD2   PINMUX_UNUSED
#define	CONF_RX_USART_PINMUX_PAD3   PINMUX_UNUSED
#define	CONF_RX_USART_SERCOM_MUX   USART_RX_1_TX_0_XCK_1
#define	CONF_STDIO_BAUDRATE   38400
#define	CONF_STDIO_MUX_SETTING   CDC_SERCOM_MUX_SETTING
#define	CONF_STDIO_PINMUX_PAD0   CDC_SERCOM_PINMUX_PAD0
#define	CONF_STDIO_PINMUX_PAD1   CDC_SERCOM_PINMUX_PAD1
#define	CONF_STDIO_PINMUX_PAD2   CDC_SERCOM_PINMUX_PAD2
#define	CONF_STDIO_PINMUX_PAD3   CDC_SERCOM_PINMUX_PAD3
#define	CONF_STDIO_USART   CDC_MODULE
#define	CONF_TX_USART   SERCOM2
#define	CONF_TX_USART_PINMUX_PAD0   PINMUX_UNUSED
#define	CONF_TX_USART_PINMUX_PAD1   PINMUX_UNUSED
#define	CONF_TX_USART_PINMUX_PAD2   PINMUX_PA14C_SERCOM2_PAD2
#define	CONF_TX_USART_PINMUX_PAD3   PINMUX_PA15C_SERCOM2_PAD3
#define	CONF_TX_USART_SERCOM_MUX   USART_RX_0_TX_2_XCK_3

#define CONF_RX_USART   SERCOM1

Referenced by run_transfer_single_9bit_char_test(), and test_system_init().

#define CONF_RX_USART_PINMUX_PAD0   PINMUX_PA16C_SERCOM1_PAD0

Referenced by test_system_init().

#define CONF_RX_USART_PINMUX_PAD1   PINMUX_PA17C_SERCOM1_PAD1

Referenced by test_system_init().

#define CONF_RX_USART_PINMUX_PAD2   PINMUX_UNUSED

Referenced by test_system_init().

#define CONF_RX_USART_PINMUX_PAD3   PINMUX_UNUSED

Referenced by test_system_init().

#define CONF_RX_USART_SERCOM_MUX   USART_RX_1_TX_0_XCK_1

Referenced by test_system_init().

#define CONF_STDIO_BAUDRATE   38400

Referenced by cdc_uart_init().

#define CONF_STDIO_MUX_SETTING   CDC_SERCOM_MUX_SETTING

Referenced by cdc_uart_init().

#define CONF_STDIO_PINMUX_PAD0   CDC_SERCOM_PINMUX_PAD0

Referenced by cdc_uart_init().

#define CONF_STDIO_PINMUX_PAD1   CDC_SERCOM_PINMUX_PAD1

Referenced by cdc_uart_init().

#define CONF_STDIO_PINMUX_PAD2   CDC_SERCOM_PINMUX_PAD2

Referenced by cdc_uart_init().

#define CONF_STDIO_PINMUX_PAD3   CDC_SERCOM_PINMUX_PAD3

Referenced by cdc_uart_init().

#define CONF_STDIO_USART   CDC_MODULE

Referenced by cdc_uart_init().

#define CONF_TX_USART   SERCOM2

Referenced by run_transfer_single_9bit_char_test(), and test_system_init().

#define CONF_TX_USART_PINMUX_PAD0   PINMUX_UNUSED

Referenced by test_system_init().

#define CONF_TX_USART_PINMUX_PAD1   PINMUX_UNUSED

Referenced by test_system_init().

#define CONF_TX_USART_PINMUX_PAD2   PINMUX_PA14C_SERCOM2_PAD2

Referenced by test_system_init().

#define CONF_TX_USART_PINMUX_PAD3   PINMUX_PA15C_SERCOM2_PAD3

Referenced by test_system_init().

#define CONF_TX_USART_SERCOM_MUX   USART_RX_0_TX_2_XCK_3

Referenced by test_system_init().