ccl.h File Reference

SAM Configurable Custom Logic (CCL) Driver.

Copyright (c) 2014-2018 Microchip Technology Inc. and its subsidiaries.

#include <compiler.h>
#include <system.h>

Data Structures
struct	ccl_config
	CCL module configuration structure. More...
struct	ccl_lut_config
	CCL LUT 0 to 3 configuration structure. More...

Enumerations
enum	ccl_lut_filter_sel {   CCL_LUT_FILTER_DISABLE = CCL_LUTCTRL_FILTSEL_DISABLE,   CCL_LUT_FILTER_SYNC = CCL_LUTCTRL_FILTSEL_SYNCH,   CCL_LUT_FILTER_ENABLE = CCL_LUTCTRL_FILTSEL_FILTER }
	Select the LUT output filter options enum. More...
enum	ccl_lut_id {   CCL_LUT_0 = 0,   CCL_LUT_1 = 1,   CCL_LUT_2 = 2,   CCL_LUT_3 = 3 }
	CCL LUT(look up table) ID number enum. More...
enum	ccl_lut_input_src_sel {   CCL_LUT_INPUT_SRC_MASK = 0,   CCL_LUT_INPUT_SRC_FEEDBACK = 1,   CCL_LUT_INPUT_SRC_LINK = 2,   CCL_LUT_INPUT_SRC_EVENT = 3,   CCL_LUT_INPUT_SRC_IO = 4,   CCL_LUT_INPUT_SRC_AC = 5,   CCL_LUT_INPUT_SRC_TC = 6,   CCL_LUT_INPUT_SRC_ALTTC = 7,   CCL_LUT_INPUT_SRC_TCC = 8,   CCL_LUT_INPUT_SRC_SERCOM = 9 }
	LUT Input source selection configuration enum. More...
enum	ccl_seq_id {   CCL_SEQ_0 = 0,   CCL_SEQ_1 = 1 }
	CCL sequential module ID number enum. More...
enum	ccl_seq_selection {   CCL_SEQ_DISABLED = CCL_SEQCTRL_SEQSEL_DISABLE,   CCL_SEQ_D_FLIP_FLOP = CCL_SEQCTRL_SEQSEL_DFF,   CCL_SEQ_JK_FLIP_FLOP = CCL_SEQCTRL_SEQSEL_JK,   CCL_SEQ_D_LATCH = CCL_SEQCTRL_SEQSEL_LATCH,   CCL_SEQ_RS_LATCH = CCL_SEQCTRL_SEQSEL_RS }
	Sequential selection enum. More...

Functions
Initialize and Reset CCL Module
void	ccl_init (struct ccl_config *const config)
	Initializes CCL module. More...
static void	ccl_get_config_defaults (struct ccl_config *const config)
	Initializes all members of a CCL configuration structure to safe defaults. More...
static void	ccl_module_reset (void)
	Resets CCL module. More...
Enable and Disable CCL Module
static void	ccl_module_enable (void)
	Enables CCL module. More...
static void	ccl_module_disable (void)
	Disables CCL module. More...
Configure LUT
enum status_code	ccl_seq_config (const enum ccl_seq_id number, const enum ccl_seq_selection seq_selection)
	Writes sequential selection to the hardware module. More...
void	ccl_lut_get_config_defaults (struct ccl_lut_config *const config)
	Initializes all members of LUT configuration structure to safe defaults. More...
enum status_code	ccl_lut_set_config (const enum ccl_lut_id number, struct ccl_lut_config *const config)
	Writes LUT configuration to the hardware module. More...
Enable and Disable LUT
void	ccl_lut_enable (const enum ccl_lut_id number)
	Enables an LUT that was previously configured. More...
void	ccl_lut_disable (const enum ccl_lut_id number)
	Disables an LUT that was previously enabled. More...