Here is a list of all functions, variables, defines, enums, and typedefs with links to the files they belong to:

- r -

• RANGE_MEASURE_MODE : app_peer_search.h
• RANGE_MEASURE_STATS_CONFIRM : perf_msg_const.h
• RANGE_TEST_BEACON : perf_msg_const.h
• RANGE_TEST_BEACON_RESPONSE : perf_msg_const.h
• range_test_frame_cnt : per_mode_initiator.c
• range_test_frame_tx() : range_measure.c
• range_test_in_progress : per_mode_receptor.c
• RANGE_TEST_IN_PROGRESS : perf_msg_const.h
• range_test_in_progress : per_mode_initiator.c
• RANGE_TEST_MARKER_CMD : app_per_mode.h
• RANGE_TEST_MARKER_IND_LEN : perf_msg_const.h
• RANGE_TEST_MARKER_INDICATION : perf_msg_const.h
• RANGE_TEST_MARKER_RSP : app_per_mode.h
• RANGE_TEST_PKT : app_per_mode.h
• RANGE_TEST_PKT_LEN : perf_msg_const.h
• RANGE_TEST_PKT_LENGTH : app_per_mode.h
• RANGE_TEST_RSP : app_per_mode.h
• RANGE_TEST_RSP_PKT_LEN : perf_msg_const.h
• range_test_rx_cb() : range_measure.c
• RANGE_TEST_START : perf_msg_const.h
• RANGE_TEST_START_CONFIRM : perf_msg_const.h
• RANGE_TEST_START_CONFIRM_LEN : perf_msg_const.h
• RANGE_TEST_START_PKT : app_per_mode.h
• RANGE_TEST_START_REQ : perf_msg_const.h
• RANGE_TEST_STOP : perf_msg_const.h
• RANGE_TEST_STOP_CONFIRM : perf_msg_const.h
• RANGE_TEST_STOP_CONFIRM_LEN : perf_msg_const.h
• RANGE_TEST_STOP_PKT : app_per_mode.h
• RANGE_TEST_STOP_REQ : perf_msg_const.h
• range_test_timer_handler_cb() : per_mode_initiator.c
• RANGE_TEST_TX : perf_msg_const.h
• RANGE_TEST_TX_OFF : app_init.h
• range_test_tx_off_task() : range_measure.c
• RANGE_TEST_TX_ON : app_init.h
• range_test_tx_on_exit() : range_measure.c
• range_test_tx_on_init() : range_measure.c
• range_test_tx_on_task() : range_measure.c
• range_test_tx_timer_handler_cb() : range_measure.c
• RANGE_TST_PKT_SEQ_POS : perf_msg_const.h
• RANGE_TX_BEACON_INTERVAL : perf_msg_const.h
• RANGE_TX_BEACON_START_INTERVAL : perf_msg_const.h
• RATE_1_MBPS : atmega256rfr2.h
• RATE_250_KBPS : atmega256rfr2.h
• RATE_2_MBPS : atmega256rfr2.h
• RATE_500_KBPS : atmega256rfr2.h
• rate_t : ieee_154g.h
• RCB256RFR2_XPRO : board.h
• rdy_to_tx : per_mode_common_utils.c , perf_api.h
• READ_MODE : qmm.c
• read_trx_registers() : per_mode_common_utils.c , perf_api.h
• recover_all_settings() : per_mode_common_utils.c , app_init.h
• register16_t : usart_megarf.h
• register8_t : usart_megarf.h
• REGISTER_ADDR_POS : perf_msg_const.h
• REGISTER_DUMP_CONFIRM : perf_msg_const.h
• REGISTER_DUMP_CONFIRM_LEN : perf_msg_const.h
• REGISTER_DUMP_REQ : perf_msg_const.h
• REGISTER_READ_CONFIRM : perf_msg_const.h
• REGISTER_READ_CONFIRM_LEN : perf_msg_const.h
• REGISTER_READ_REQ : perf_msg_const.h
• REGISTER_VAL_POS : perf_msg_const.h
• REGISTER_VALUE : tal_helper.h
• REGISTER_WRITE_CONFIRM : perf_msg_const.h
• REGISTER_WRITE_CONFIRM_LEN : perf_msg_const.h
• REGISTER_WRITE_REQ : perf_msg_const.h
• remote_cmd_len : per_mode_receptor.c
• REMOTE_CMD_MASK : perf_msg_const.h
• remote_cmd_ptr : per_mode_receptor.c
• remote_cmd_rcvd : perf_api_serial_handler.c
• remote_cmd_rx : per_mode_receptor.c
• remote_cw_start : per_mode_common_utils.c , perf_api.h
• REMOTE_MSG_BUF_SIZE : app_frame_format.h
• remote_pulse_cw_start : per_mode_common_utils.c , perf_api.h
• remote_serial_tx_failure : per_mode_common_utils.c , perf_api.h
• REMOTE_TEST_CMD : app_per_mode.h
• REMOTE_TEST_MODE : perf_msg_const.h
• REMOTE_TEST_REPLY_CMD : app_per_mode.h
• REMOVE_MODE : qmm.c
• reset_cause_clear_causes() : mega_reset_cause.h
• reset_cause_get_causes() : mega_reset_cause.h
• reset_cause_t : mega_reset_cause.h
• RESET_TO_TRX_OFF_ATTEMPTS : tal_init.c
• RESET_TO_TRX_OFF_MAX_US : atmega256rfr2.h
• RESET_TO_TRX_OFF_TYP_US : atmega256rfr2.h
• restart_time : per_mode_initiator.c
• restore_cpu_interrupt() : hw_timer.c , hw_timer.h
• RESULT_REQ : app_per_mode.h
• RESULT_RSP : app_per_mode.h
• RESULT_SIZE_PER_CHANNEL : perf_msg_const.h
• retval_t : return_val.h
• retval_tag : return_val.h
• reverse_float() : per_mode_common_utils.c , app_per_mode.h
• RF4CE : stack_config.h
• RF_BAND : tal.h
• RG_AES_CTRL : atmega256rfr2.h
• RG_AES_KEY : atmega256rfr2.h
• RG_AES_STATE : atmega256rfr2.h
• RG_AES_STATUS : atmega256rfr2.h
• RG_ANT_DIV : atmega256rfr2.h
• RG_BATMON : atmega256rfr2.h
• RG_CC_CTRL_0 : atmega256rfr2.h
• RG_CC_CTRL_1 : atmega256rfr2.h
• RG_CCA_THRES : atmega256rfr2.h
• RG_CSMA_BE : atmega256rfr2.h
• RG_CSMA_SEED_0 : atmega256rfr2.h
• RG_CSMA_SEED_1 : atmega256rfr2.h
• RG_FTN_CTRL : atmega256rfr2.h
• RG_IEEE_ADDR_0 : atmega256rfr2.h
• RG_IEEE_ADDR_1 : atmega256rfr2.h
• RG_IEEE_ADDR_2 : atmega256rfr2.h
• RG_IEEE_ADDR_3 : atmega256rfr2.h
• RG_IEEE_ADDR_4 : atmega256rfr2.h
• RG_IEEE_ADDR_5 : atmega256rfr2.h
• RG_IEEE_ADDR_6 : atmega256rfr2.h
• RG_IEEE_ADDR_7 : atmega256rfr2.h
• RG_IRQ_MASK : atmega256rfr2.h
• RG_IRQ_MASK1 : atmega256rfr2.h
• RG_IRQ_STATUS : atmega256rfr2.h
• RG_IRQ_STATUS1 : atmega256rfr2.h
• RG_MAFCR0 : atmega256rfr2.h
• RG_MAFCR1 : atmega256rfr2.h
• RG_MAFPA0H : atmega256rfr2.h
• RG_MAFPA0L : atmega256rfr2.h
• RG_MAFPA1H : atmega256rfr2.h
• RG_MAFPA1L : atmega256rfr2.h
• RG_MAFPA2H : atmega256rfr2.h
• RG_MAFPA2L : atmega256rfr2.h
• RG_MAFPA3H : atmega256rfr2.h
• RG_MAFPA3L : atmega256rfr2.h
• RG_MAFSA0H : atmega256rfr2.h
• RG_MAFSA0L : atmega256rfr2.h
• RG_MAFSA1H : atmega256rfr2.h
• RG_MAFSA1L : atmega256rfr2.h
• RG_MAFSA2H : atmega256rfr2.h
• RG_MAFSA2L : atmega256rfr2.h
• RG_MAFSA3H : atmega256rfr2.h
• RG_MAFSA3L : atmega256rfr2.h
• RG_MAN_ID_0 : atmega256rfr2.h
• RG_MAN_ID_1 : atmega256rfr2.h
• RG_PAN_ID_0 : atmega256rfr2.h
• RG_PAN_ID_1 : atmega256rfr2.h
• RG_PARCR : atmega256rfr2.h
• RG_PART_NUM : atmega256rfr2.h
• RG_PHY_CC_CCA : atmega256rfr2.h
• RG_PHY_ED_LEVEL : atmega256rfr2.h
• RG_PHY_RSSI : atmega256rfr2.h
• RG_PHY_TX_PWR : atmega256rfr2.h
• RG_PLL_CF : atmega256rfr2.h
• RG_PLL_DCU : atmega256rfr2.h
• RG_RX_CTRL : atmega256rfr2.h
• RG_RX_SYN : atmega256rfr2.h
• RG_SFD_VALUE : atmega256rfr2.h
• RG_SHORT_ADDR_0 : atmega256rfr2.h
• RG_SHORT_ADDR_1 : atmega256rfr2.h
• RG_TRX_CTRL_0 : atmega256rfr2.h
• RG_TRX_CTRL_1 : atmega256rfr2.h
• RG_TRX_CTRL_2 : atmega256rfr2.h
• RG_TRX_RPC : atmega256rfr2.h
• RG_TRX_STATE : atmega256rfr2.h
• RG_TRX_STATUS : atmega256rfr2.h
• RG_TRXFBEND : atmega256rfr2.h
• RG_TRXFBST : atmega256rfr2.h
• RG_TST_CTRL_DIGI : atmega256rfr2.h
• RG_TST_RX_LENGTH : atmega256rfr2.h
• RG_VERSION_NUM : atmega256rfr2.h
• RG_VREG_CTRL : atmega256rfr2.h
• RG_XAH_CTRL_0 : atmega256rfr2.h
• RG_XAH_CTRL_1 : atmega256rfr2.h
• RG_XOSC_CTRL : atmega256rfr2.h
• RSSI_BASE_VAL_DBM : atmega256rfr2.h
• RST_PULSE_WIDTH_US : atmega256rfr2.h
• RTB : stack_config.h
• running_timer_queue_head : common_sw_timer.c
• running_timers : common_sw_timer.c
• RX_AACK_ON : atmega256rfr2.h
• RX_AACK_ON_NOCLK : atmega256rfr2.h
• RX_DESENSITIZE_LEVEL : perf_msg_const.h
• RX_DISABLE : atmega256rfr2.h
• RX_ENABLE : atmega256rfr2.h
• rx_index : perf_api_serial_handler.c
• RX_LED : app_init.h
• RX_ON : atmega256rfr2.h
• RX_ON_CONFIRM : perf_msg_const.h
• RX_ON_CONFIRM_LEN : perf_msg_const.h
• rx_on_mode : perf_api.h , per_mode_common_utils.c
• RX_ON_MODE_IN_PROGRESS : perf_msg_const.h
• RX_ON_NOCLK : atmega256rfr2.h
• RX_ON_REQ : perf_msg_const.h
• RX_ON_STOP : perf_msg_const.h
• rx_on_test() : per_mode_common_utils.c , perf_api.h
• RX_SAFE_MODE_DISABLE : atmega256rfr2.h
• RX_SAFE_MODE_ENABLE : atmega256rfr2.h
• RZ600 : board.h
• RZ600_AT86RF212 : board.h
• RZ600_AT86RF230B : board.h
• RZ600_AT86RF231 : board.h