trx_access.c File Reference

#include "board.h"
#include "spi.h"
#include "trx_access.h"
#include "delay.h"
#include "interrupt.h"
#include "conf_board.h"
#include "asf.h"

Functions
	if (irq_hdl_trx)
void	PhyReset (void)
	Resets the TRX radio. More...
void	trx_aes_wrrd (uint8_t addr, uint8_t *idata, uint8_t length)
	Writes and reads data into/from SRAM of the transceiver. More...
uint8_t	trx_bit_read (uint8_t addr, uint8_t mask, uint8_t pos)
	Subregister read. More...
void	trx_bit_write (uint8_t reg_addr, uint8_t mask, uint8_t pos, uint8_t new_value)
	Subregister write. More...
void	trx_frame_read (uint8_t *data, uint8_t length)
	Reads frame buffer of the transceiver. More...
void	trx_frame_write (uint8_t *data, uint8_t length)
	Writes data into frame buffer of the transceiver. More...
void	trx_irq_init (FUNC_PTR trx_irq_cb)
uint8_t	trx_reg_read (uint8_t addr)
	Reads current value from a transceiver register. More...
void	trx_reg_write (uint8_t addr, uint8_t data)
	Writes data into a transceiver register. More...
void	trx_spi_disable (void)
	Disables the SPI interface for communication with the transceiver. More...
void	trx_spi_enable (void)
	enables the SPI interface for communication with the transceiver More...
void	trx_spi_init (void)
	Initializes the SPI interface for communication with the transceiver. More...
void	trx_sram_read (uint8_t addr, uint8_t *data, uint8_t length)
	Reads data from SRAM of the transceiver. More...
void	trx_sram_write (uint8_t addr, uint8_t *data, uint8_t length)
	Writes data into SRAM of the transceiver. More...

Variables
static irq_handler_t	irq_hdl_trx = NULL
struct spi_device	SPI_AT86RFX_DEVICE

if

(

irq_hdl_trx

)

References irq_hdl_trx.

Referenced by app_task(), peer_search_receptor_rx_cb(), peer_search_receptor_task(), peer_search_receptor_tx_done_cb(), usr_get_current_config_confirm(), usr_perf_start_confirm(), and usr_set_default_config_confirm().

irq_handler_t irq_hdl_trx = NULL

static

Referenced by if(), and trx_irq_init().

struct spi_device SPI_AT86RFX_DEVICE

Initial value:

= {
    
    .id = AT86RFX_SPI_CS
}

Referenced by trx_aes_wrrd(), trx_frame_read(), trx_frame_write(), trx_reg_read(), trx_reg_write(), trx_spi_init(), trx_sram_read(), and trx_sram_write().