- a -

• acc : bma150.c , bma220.c , bma250.c , bma222.c
• acceleration : main.c
• accelerometer : main.c
• addr_count : twim.c
• alert_phase : bma150.c

- b -

• band_table : bma020.c , bma150.c , bma220.c , kxtf9.c , imu3000.c , itg3200.c , hmc5883l.c , bma250.c , bma222.c , bma180.c
• burst_increment : bma220.c
• bus : twim.c

- c -

• cal_data : hmc5883l.c
• caldata : bmp.c
• calibrated_offsets : ak8975.c
• current_table : sfh7770.c

- d -

• d_tap_int : bma222.c , bma250.c
• data_count : twim.c
• data_int : bma222.c , bma220.c , bma250.c
• dev_range : hmc5883l.c

- e -

• event_cb : bma150.c , bma220.c , bma250.c , sfh7770.c , imu3000.c , bma222.c , kxtf9.c , itg3200.c
• event_regs : bma220.c , bma222.c , bma250.c , bma150.c

- f -

• flat : bma222.c , bma250.c
• flat_int : bma222.c , bma250.c

- g -

• gyroscope : main.c

- h -

• HG_issued : bma150.c
• HG_latched : bma150.c
• high_first_x : bma250.c , bma222.c
• high_first_y : bma222.c , bma250.c
• high_first_z : bma250.c , bma222.c
• high_int : bma220.c , bma250.c , bma222.c
• high_light_threshold : sfh7770.c
• high_sign : bma222.c , bma250.c

- i -

• int_first_x : bma220.c
• int_first_y : bma220.c
• int_first_z : bma220.c
• int_sign : bma220.c

- l -

• LG_issued : bma150.c
• LG_latched : bma150.c
• light_rate_table : sfh7770.c
• locked : twim.c
• low_int : bma220.c , bma222.c , bma250.c
• low_light_threshold : sfh7770.c

- o -

• orient : bma220.c , bma222.c , bma250.c
• orient_int : bma220.c , bma222.c , bma250.c

- p -

• pkg : twim.c
• prox_rate_table : sfh7770.c
• ptr_get : stdio_serial.h , read.c
• ptr_put : stdio_serial.h , write.c

- r -

• range_table : bma020.c , bma150.c , bma220.c , imu3000.c , kxtf9.c , bma222.c , bma180.c , bma250.c , hmc5883l.c
• read : twim.c
• reserved_09 : bma222.c , bma250.c
• reserved_0a : bma222.c , bma250.c
• rotation : main.c

- s -

• s_tap_int : bma222.c , bma250.c
• scale_lsb_per_dps : imu3000.c
• scale_table : hmc5883l.c
• sensor_dlpf_cfg : imu3000.c
• sensor_fs_sel : imu3000.c
• sensor_oss : bmp.c
• sensor_pin3_arg : sensors_xplained.c
• sensor_pin3_handler : sensors_xplained.c
• sensor_pin4_arg : sensors_xplained.c
• sensor_pin4_handler : sensors_xplained.c
• sensor_pin5_arg : sensors_xplained.c
• sensor_pin5_handler : sensors_xplained.c
• sfh7770_initialized : sfh7770.c
• sleepmgr_configs : xmega/sleepmgr.h , sleepmgr.c
• sleepmgr_locks : sleepmgr.c , xmega/sleepmgr.h
• slope_first_x : bma222.c , bma250.c
• slope_first_y : bma222.c , bma250.c
• slope_first_z : bma222.c , bma250.c
• slope_int : bma250.c , bma220.c , bma222.c
• slope_sign : bma222.c , bma250.c
• st_result : bma150.c
• status : twim.c
• status_byte : bma220.c , bma150.c , bma250.c , bma222.c
• status_field : bma250.c , bma220.c , bma150.c , bma222.c
• stdio_base : write.c , read.c , stdio_serial.h

- t -

• tap_first_x : bma222.c , bma250.c
• tap_first_y : bma250.c , bma222.c
• tap_first_z : bma222.c , bma250.c
• tap_sign : bma250.c , bma222.c
• temp : bma150.c , bma222.c , bma250.c
• transfer : twim.c
• tt_int : bma220.c

- u -

• unused : bma150.c , bma220.c