Here is a list of all functions, variables, defines, enums, and typedefs with links to the files they belong to:

- c -

• cal_data : hmc5883l.c
• CAL_OFFSETS_ADDR : hmc5883l.c
• CAL_SENSITIVITY_ADDR : hmc5883l.c
• caldata : bmp.c
• calibrated_offsets : ak8975.c
• CCPU_ENDIAN_TO_LE16 : compiler.h
• CCPU_ENDIAN_TO_LE32 : compiler.h
• CCPU_ENDIAN_TO_LE64 : compiler.h
• CELSIUS_TO_FAHRENHEIT : constants.h
• CELSIUS_TO_KELVIN : constants.h
• CLE16_TO_CPU_ENDIAN : compiler.h
• CLE32_TO_CPU_ENDIAN : compiler.h
• CLE64_TO_CPU_ENDIAN : compiler.h
• Clr_bits : compiler.h
• clz : compiler.h
• CMD_ID_OCTET : compiler.h
• COMMON_SENSOR_PLATFORM : uc3_l0_xplained.h
• COMPILER_ALIGNED : compiler.h
• COMPILER_PACK_RESET : compiler.h
• COMPILER_PACK_SET : compiler.h
• COMPILER_PRAGMA : compiler.h
• COMPILER_WORD_ALIGNED : compiler.h
• CONF_BOARD_COM_PORT : conf_platform.h
• CONF_BOARD_ENABLE_USARTC0 : conf_platform.h
• CONF_BOARD_ENABLE_USARTD0 : conf_platform.h
• CONF_BOARD_ENABLE_USARTE0 : conf_platform.h
• CONF_BOARD_SPI : conf_platform.h
• CONF_BOARD_TWI : conf_platform.h
• CONF_SENSOR_BUS_TWI : sensors_xplained.h
• CONF_STDIO_USB : conf_sensors.h
• CONF_TWIM_IRQ_GROUP : conf_twim.h
• CONF_TWIM_IRQ_LEVEL : conf_twim.h
• CONF_TWIM_IRQ_LINE : conf_twim.h
• CONFIG_GPIO_INT_LVL : conf_platform.h
• CONFIG_INTERRUPT_FORCE_INTC : interrupt.h
• CONFIG_SLEEPMGR_ENABLE : conf_sleepmgr.h
• CONFIG_SPI_BAUDRATE : conf_sensors.h
• CONFIG_SPI_MASTER_IF : conf_sensors.h
• CONFIG_SPI_OFFSET : conf_sensors.h
• CONFIG_SYSCLK_CPU_DIV : uc3l/sysclk.h
• CONFIG_SYSCLK_INIT_CPUMASK : uc3l/sysclk.h
• CONFIG_SYSCLK_INIT_HSBMASK : uc3l/sysclk.h
• CONFIG_SYSCLK_INIT_PBAMASK : uc3l/sysclk.h
• CONFIG_SYSCLK_INIT_PBBMASK : uc3l/sysclk.h
• CONFIG_SYSCLK_PBA_DIV : uc3l/sysclk.h
• CONFIG_SYSCLK_PBB_DIV : uc3l/sysclk.h
• CONFIG_SYSCLK_SOURCE : uc3l/sysclk.h
• CONFIG_TWI_BAUDRATE : conf_sensors.h
• CONFIG_TWI_MASTER_IF : conf_sensors.h
• CONFIG_TWI_OFFSET : conf_sensors.h
• CONFIG_TWIM_INT_LVL : conf_platform.h
• CONFIG_USART_BAUDRATE : conf_sensors.h
• CONFIG_USART_CHAR_LENGTH : conf_sensors.h
• CONFIG_USART_IF : conf_sensors.h
• CONFIG_USART_PARITY : conf_sensors.h
• CONFIG_USART_SERIAL_MODE : usart_serial.h
• CONFIG_USART_STOP_BIT : conf_sensors.h
• CONFIG_USBCLK_DIV : uc3l/sysclk.h
• CONFIG_USBCLK_SOURCE : uc3l/sysclk.h
• CONST_AIR_MOLAR_MASS : constants.h
• CONST_BOLTZMANN : constants.h
• CONST_REAL_GAS : constants.h
• CONST_STANDARD_ATM : constants.h
• CONST_STANDARD_GRAVITY : constants.h
• CONST_UNIVERSAL_GAS : constants.h
• CONST_UNIVERSAL_GRAVITY : constants.h
• convert_16_bit_to_byte_address() : compiler.h
• convert_16_bit_to_byte_array() : compiler.h
• convert_32_bit_to_byte_array : compiler.h
• convert_64_bit_to_byte_array : compiler.h
• convert_byte_array_to_16_bit() : compiler.h
• convert_byte_array_to_32_bit() : compiler.h
• convert_byte_array_to_64_bit() : compiler.h
• convert_spec_16_bit_to_byte_array() : compiler.h
• cpu_cy_2_ms() : cycle_counter.h
• cpu_cy_2_us() : cycle_counter.h
• cpu_delay_cy() : cycle_counter.h
• cpu_delay_ms() : cycle_counter.h
• cpu_delay_us() : cycle_counter.h
• CPU_ENDIAN_TO_LE16 : compiler.h
• CPU_ENDIAN_TO_LE32 : compiler.h
• CPU_ENDIAN_TO_LE64 : compiler.h
• cpu_irq_disable : interrupt_avr32.h
• cpu_irq_disable_level : interrupt_avr32.h
• cpu_irq_enable : interrupt_avr32.h
• cpu_irq_enable_level : interrupt_avr32.h
• cpu_irq_is_enabled : interrupt_avr32.h
• cpu_irq_is_enabled_flags() : interrupt_avr32.h
• cpu_irq_level_is_enabled : interrupt_avr32.h
• cpu_irq_level_is_enabled_flags() : interrupt_avr32.h
• cpu_irq_restore() : interrupt_avr32.h
• cpu_irq_save() : interrupt_avr32.h
• cpu_is_timeout() : cycle_counter.h
• cpu_is_timer_stopped() : cycle_counter.h
• cpu_ms_2_cy() : cycle_counter.h
• cpu_relax : compiler.h
• cpu_set_timeout() : cycle_counter.h
• cpu_stop_timeout() : cycle_counter.h
• CPU_TIMER_STATE_REACHED : cycle_counter.h
• CPU_TIMER_STATE_STARTED : cycle_counter.h
• CPU_TIMER_STATE_STOPPED : cycle_counter.h
• cpu_to_be16 : compiler.h
• CPU_TO_BE16 : compiler.h
• cpu_to_be32 : compiler.h
• CPU_TO_BE32 : compiler.h
• cpu_to_le16 : compiler.h
• CPU_TO_LE16 : compiler.h
• cpu_to_le32 : compiler.h
• CPU_TO_LE32 : compiler.h
• cpu_us_2_cy() : cycle_counter.h
• CTRL0_DIS_WAKE_UP : bma180.h
• CTRL0_EE_W : bma180.h
• CTRL0_RESET_INT : bma180.h
• CTRL0_SLEEP_MODE : bma180.h
• CTRL0_ST0 : bma180.h
• CTRL0_ST1 : bma180.h
• CTRL0_ST_DAMP : bma180.h
• CTRL0_UPDATE_IMAGE : bma180.h
• CTRL1_EE_W : bma150.h
• CTRL1_EN_OFFSET_X : bma180.h
• CTRL1_EN_OFFSET_Y : bma180.h
• CTRL1_EN_OFFSET_Z : bma180.h
• CTRL1_RESET_INT : bma020.h , bma150.h
• CTRL1_SEL_T : bma180.h
• CTRL1_SEL_X : bma180.h
• CTRL1_SEL_Y : bma180.h
• CTRL1_SEL_Z : bma180.h
• CTRL1_SELF_TEST_0 : bma020.h , bma150.h
• CTRL1_SELF_TEST_1 : bma020.h , bma150.h
• CTRL1_SLEEP : bma020.h , bma150.h
• CTRL1_SOFT_RESET : bma150.h , bma020.h
• CTRL1_UDPATE_IMAGE : bma150.h
• CTRL2_ALERT : bma020.h , bma150.h
• CTRL2_ANY_MOTION : bma020.h , bma150.h
• CTRL2_COUNTER_HG : bma020.h , bma150.h
• CTRL2_COUNTER_LG : bma020.h , bma150.h
• CTRL2_ENABLE_HG : bma150.h , bma020.h
• CTRL2_ENABLE_LG : bma020.h , bma150.h
• CTRL2_ST_AMP : bma180.h
• CTRL2_UNLOCK_EE : bma180.h
• CTRL3_ADV_INT : bma180.h
• CTRL3_ANY_MOTION_DUR : bma150.h , bma020.h
• CTRL3_HG_HYST : bma020.h , bma150.h
• CTRL3_HIGH_INT : bma180.h
• CTRL3_LAT_INT : bma180.h
• CTRL3_LG_HYST : bma020.h , bma150.h
• CTRL3_LOW_INT : bma180.h
• CTRL3_NEW_DATA_INT : bma180.h
• CTRL3_SLOPE_ALERT : bma180.h
• CTRL3_SLOPE_INT : bma180.h
• CTRL3_TAPSENS_INT_EN : bma180.h
• CTRL4_BANDWIDTH : bma020.h , bma150.h
• CTRL4_FF_CD_R : bma180.h
• CTRL4_LOW_HY_LSB : bma180.h
• CTRL4_MOT_CD_R : bma180.h
• CTRL4_OFFSET_FINETUNING : bma180.h
• CTRL4_RANGE : bma020.h , bma150.h
• CTRL5_ENABLE_ADV_INT : bma150.h , bma020.h
• CTRL5_LATCH_INT : bma020.h , bma150.h
• CTRL5_NEW_DATA_INT : bma020.h , bma150.h
• CTRL5_SHADOW_DIS : bma020.h , bma150.h
• CTRL5_SPI4 : bma150.h , bma020.h
• CTRL5_WAKE_UP : bma020.h , bma150.h
• CTRL5_WAKE_UP_PAUSE : bma020.h , bma150.h
• CTRL_REG1_DRDYE : kxtf9.h
• CTRL_REG1_GSEL : kxtf9.h
• CTRL_REG1_GSEL_2G : kxtf9.h
• CTRL_REG1_GSEL_4G : kxtf9.h
• CTRL_REG1_GSEL_8G : kxtf9.h
• CTRL_REG1_PC1 : kxtf9.h
• CTRL_REG1_RES : kxtf9.h
• CTRL_REG1_TDTE : kxtf9.h
• CTRL_REG1_TPE : kxtf9.h
• CTRL_REG1_WUFE : kxtf9.h
• CTRL_REG2_DOM : kxtf9.h
• CTRL_REG2_FDM : kxtf9.h
• CTRL_REG2_FUM : kxtf9.h
• CTRL_REG2_LEM : kxtf9.h
• CTRL_REG2_RIM : kxtf9.h
• CTRL_REG2_UPM : kxtf9.h
• CTRL_REG3_DCST : kxtf9.h
• CTRL_REG3_OTDT : kxtf9.h
• CTRL_REG3_OTDT_100HZ : kxtf9.h
• CTRL_REG3_OTDT_200HZ : kxtf9.h
• CTRL_REG3_OTDT_400HZ : kxtf9.h
• CTRL_REG3_OTDT_50HZ : kxtf9.h
• CTRL_REG3_OTP : kxtf9.h
• CTRL_REG3_OTP_12_5HZ : kxtf9.h
• CTRL_REG3_OTP_1_6HZ : kxtf9.h
• CTRL_REG3_OTP_50HZ : kxtf9.h
• CTRL_REG3_OTP_6_3HZ : kxtf9.h
• CTRL_REG3_OWUF : kxtf9.h
• CTRL_REG3_OWUF_100HZ : kxtf9.h
• CTRL_REG3_OWUF_200HZ : kxtf9.h
• CTRL_REG3_OWUF_25HZ : kxtf9.h
• CTRL_REG3_OWUF_50HZ : kxtf9.h
• CTRL_REG3_SRST : kxtf9.h
• ctz : compiler.h
• current_table : sfh7770.c