Macros | |
| #define | AWAITVRISE_TIMER AVR32_USBB_USBCON_TIMPAGE_A_WAIT_VRISE |
| #define | AWAITVRISE_TMOUT_100_MS AVR32_USBB_USBCON_TIMVALUE_A_WAIT_VRISE_100_MS |
| #define | AWAITVRISE_TMOUT_20_MS AVR32_USBB_USBCON_TIMVALUE_A_WAIT_VRISE_20_MS |
| #define | AWAITVRISE_TMOUT_50_MS AVR32_USBB_USBCON_TIMVALUE_A_WAIT_VRISE_50_MS |
| #define | AWAITVRISE_TMOUT_70_MS AVR32_USBB_USBCON_TIMVALUE_A_WAIT_VRISE_70_MS |
| #define | BANK_PID_DATA0 0 |
| #define | BANK_PID_DATA1 1 |
| #define | DIRECTION_IN AVR32_USBB_UECFGX_EPDIR_IN |
| #define | DIRECTION_OUT AVR32_USBB_UECFGX_EPDIR_OUT |
| #define | DMA_BUFFER_SIZE_16_BITS AVR32_USBB_UFEATURES_DMA_BUFFER_SIZE_16_BITS |
| #define | DMA_BUFFER_SIZE_24_BITS AVR32_USBB_UFEATURES_DMA_BUFFER_SIZE_24_BITS |
| #define | DOUBLE_BANK AVR32_USBB_UECFGX_EPBK_DOUBLE |
| #define | EP_0 0 |
| #define | EP_1 1 |
| #define | EP_2 2 |
| #define | EP_3 3 |
| #define | EP_4 4 |
| #define | EP_5 5 |
| #define | EP_6 6 |
| #define | EP_CONTROL 0 |
| #define | Host_ack_all_errors(p) |
| acks all pipe error More... | |
| #define | Host_ack_bad_data_toggle(p) (Clr_bits(AVR32_USBB_uperrx(p), AVR32_USBB_UPERRX_DATATGL_MASK)) |
| acks bad data toggle More... | |
| #define | Host_ack_control_in_received() (AVR32_USBB_upstaxclr(P_CONTROL) = AVR32_USBB_UPSTAXCLR_RXINIC_MASK) |
| acks control IN More... | |
| #define | Host_ack_control_in_received_free() (Host_ack_control_in_received(), Host_free_control_in()) |
| acks control IN and frees current bank More... | |
| #define | Host_ack_control_out_ready() (AVR32_USBB_upstaxclr(P_CONTROL) = AVR32_USBB_UPSTAXCLR_TXOUTIC_MASK) |
| acks control OUT More... | |
| #define | Host_ack_control_out_ready_send() (Host_ack_control_out_ready(), Host_send_control_out()) |
| acks control OUT and sends current bank More... | |
| #define | Host_ack_crc16_error(p) (Clr_bits(AVR32_USBB_uperrx(p), AVR32_USBB_UPERRX_CRC16_MASK)) |
| acks CRC16 error More... | |
| #define | Host_ack_crc_error(p) (AVR32_USBB_upstaxclr(p) = AVR32_USBB_UPSTAXCLR_RXSTALLDIC_MASK) |
| acks CRC ERROR ISO IN detected More... | |
| #define | Host_ack_data_pid_error(p) (Clr_bits(AVR32_USBB_uperrx(p), AVR32_USBB_UPERRX_DATAPID_MASK)) |
| acks data PID error More... | |
| #define | Host_ack_device_connection() (AVR32_USBB_uhintclr = AVR32_USBB_UHINTCLR_DCONNIC_MASK) |
| acks device connection More... | |
| #define | Host_ack_device_disconnection() (AVR32_USBB_uhintclr = AVR32_USBB_UHINTCLR_DDISCIC_MASK) |
| acks device disconnection More... | |
| #define | Host_ack_down_stream_resume() (AVR32_USBB_uhintclr = AVR32_USBB_UHINTCLR_RSMEDIC_MASK) |
| acks host down stream resume sent More... | |
| #define | Host_ack_fifocon(p) (AVR32_USBB_upconxclr(p) = AVR32_USBB_UPCONXCLR_FIFOCONC_MASK) |
| clears FIFOCON bit More... | |
| #define | Host_ack_hwup() (AVR32_USBB_uhintclr = AVR32_USBB_UHINTCLR_HWUPIC_MASK) |
| acks host wake-up detection More... | |
| #define | Host_ack_in_received(p) (AVR32_USBB_upstaxclr(p) = AVR32_USBB_UPSTAXCLR_RXINIC_MASK) |
| acks IN reception More... | |
| #define | Host_ack_in_received_free(p) (Host_ack_in_received(p), Host_free_in(p)) |
| acks IN reception and frees current bank More... | |
| #define | Host_ack_nak_received(p) (AVR32_USBB_upstaxclr(p) = AVR32_USBB_UPSTAXCLR_NAKEDIC_MASK) |
| acks NAK received More... | |
| #define | Host_ack_out_ready(p) (AVR32_USBB_upstaxclr(p) = AVR32_USBB_UPSTAXCLR_TXOUTIC_MASK) |
| acks OUT sent More... | |
| #define | Host_ack_out_ready_send(p) (Host_ack_out_ready(p), Host_send_out(p)) |
| acks OUT sent and sends current bank More... | |
| #define | Host_ack_overflow_interrupt(p) (AVR32_USBB_upstaxclr(p) = AVR32_USBB_UPSTAXCLR_OVERFIC_MASK) |
| acks pipe overflow interrupt More... | |
| #define | Host_ack_pid_error(p) (Clr_bits(AVR32_USBB_uperrx(p), AVR32_USBB_UPERRX_PID_MASK)) |
| acks PID error More... | |
| #define | Host_ack_pipe_error(p) (AVR32_USBB_upstaxset(p) = (Is_host_pipe_error(p)) ? AVR32_USBB_UPSTAXSET_PERRIS_MASK : 0) |
| acks pipe error More... | |
| #define | Host_ack_remote_wakeup() (AVR32_USBB_uhintclr = AVR32_USBB_UHINTCLR_RXRSMIC_MASK) |
| acks host remote wake-up detection More... | |
| #define | Host_ack_reset_sent() (AVR32_USBB_uhintclr = AVR32_USBB_UHINTCLR_RSTIC_MASK) |
| acks host USB reset sent More... | |
| #define | Host_ack_setup_ready() (AVR32_USBB_upstaxclr(P_CONTROL) = AVR32_USBB_UPSTAXCLR_TXSTPIC_MASK) |
| acks setup More... | |
| #define | Host_ack_setup_ready_send() (Host_ack_setup_ready(), Host_send_setup()) |
| acks setup and sends current bank More... | |
| #define | Host_ack_short_packet(p) (AVR32_USBB_upstaxclr(p) = AVR32_USBB_UPSTAXCLR_SHORTPACKETIC_MASK) |
| acks SHORT PACKET received More... | |
| #define | Host_ack_sof() (AVR32_USBB_uhintclr = AVR32_USBB_UHINTCLR_HSOFIC_MASK) |
| acks SOF detection More... | |
| #define | Host_ack_stall(p) (AVR32_USBB_upstaxclr(p) = AVR32_USBB_UPSTAXCLR_RXSTALLDIC_MASK) |
| acks STALL reception More... | |
| #define | Host_ack_timeout_error(p) (Clr_bits(AVR32_USBB_uperrx(p), AVR32_USBB_UPERRX_TIMEOUT_MASK)) |
| acks time-out error More... | |
| #define | Host_ack_underflow_interrupt(p) (AVR32_USBB_upstaxclr(p) = AVR32_USBB_UPSTAXCLR_TXSTPIC_MASK) |
| acks pipe underflow interrupt More... | |
| #define | Host_allocate_memory(p) (Set_bits(AVR32_USBB_upcfgx(p), AVR32_USBB_UPCFGX_ALLOC_MASK)) |
| allocates the configuration x in DPRAM memory More... | |
| #define | Host_byte_count(p) (Rd_bitfield(AVR32_USBB_upstax(p), AVR32_USBB_UPSTAX_PBYCT_MASK)) |
| returns the byte count More... | |
| #define | Host_clear_error_counter(p) (Clr_bits(AVR32_USBB_uperrx(p), AVR32_USBB_UPERRX_COUNTER_MASK)) |
| clears the error counter More... | |
| #define | Host_configure_address(p, addr) (Wr_bitfield(AVR32_USBB_uhaddrx(1 + ((p) >> 2)), AVR32_USBB_UHADDR1_UHADDR_P0_MASK << (((p) & 0x03) << 3), addr)) |
| configures the USB device address associated with the selected pipe More... | |
| #define | Host_configure_pipe(p, freq, ep_num, type, token, size, bank) |
| configures selected pipe in one step More... | |
| #define | Host_configure_pipe_bank(p, bank) (Wr_bitfield(AVR32_USBB_upcfgx(p), AVR32_USBB_UPCFGX_PBK_MASK, bank)) |
| configures the selected pipe number of banks More... | |
| #define | Host_configure_pipe_endpoint_number(p, ep_num) (Wr_bitfield(AVR32_USBB_upcfgx(p), AVR32_USBB_UPCFGX_PEPNUM_MASK, ep_num)) |
| configures the selected pipe endpoint number More... | |
| #define | Host_configure_pipe_int_req_freq(p, freq) (Wr_bitfield(AVR32_USBB_upcfgx(p), AVR32_USBB_UPCFGX_INTFRQ_MASK, freq)) |
| configures the interrupt pipe request frequency (period in ms) for the selected pipe More... | |
| #define | Host_configure_pipe_size(p, size) (Wr_bitfield(AVR32_USBB_upcfgx(p), AVR32_USBB_UPCFGX_PSIZE_MASK, Host_format_pipe_size(size))) |
| configures the selected pipe size More... | |
| #define | Host_configure_pipe_token(p, token) (Wr_bitfield(AVR32_USBB_upcfgx(p), AVR32_USBB_UPCFGX_PTOKEN_MASK, token)) |
| configures the selected pipe token More... | |
| #define | Host_configure_pipe_type(p, type) (Wr_bitfield(AVR32_USBB_upcfgx(p), AVR32_USBB_UPCFGX_PTYPE_MASK, type)) |
| configures the selected pipe type More... | |
| #define | Host_current_bank(p) (Rd_bitfield(AVR32_USBB_upstax(p), AVR32_USBB_UPSTAX_CURRBK_MASK)) |
| returns the number of the current bank More... | |
| #define | Host_data_toggle(p) (Rd_bitfield(AVR32_USBB_upstax(p), AVR32_USBB_UPSTAX_DTSEQ_MASK)) |
| returns data toggle More... | |
| #define | Host_disable_bank_interrupt(p) (AVR32_USBB_upconxclr(p) = AVR32_USBB_UPCONXCLR_NBUSYBKEC_MASK) |
| disables all banks full (IN) or free (OUT) interrupt More... | |
| #define | Host_disable_continuous_in_mode(p) (Clr_bits(AVR32_USBB_upinrqx(p), AVR32_USBB_UPINRQX_INMODE_MASK)) |
| disables continuous IN mode More... | |
| #define | Host_disable_control_in_received_interrupt() (AVR32_USBB_upconxclr(P_CONTROL) = AVR32_USBB_UPCONXCLR_RXINEC_MASK) |
| disables IN control pipe reception interrupt More... | |
| #define | Host_disable_control_out_ready_interrupt() (AVR32_USBB_upconxclr(P_CONTROL) = AVR32_USBB_UPCONXCLR_TXOUTEC_MASK) |
| disables OUT control pipe ready interrupt More... | |
| #define | Host_disable_crc_error_interrupt(p) (AVR32_USBB_upconxclr(p) = AVR32_USBB_UPCONXCLR_RXSTALLDEC_MASK) |
| disables CRC ERROR ISO IN detected interrupt More... | |
| #define | Host_disable_device_connection_interrupt() (AVR32_USBB_uhinteclr = AVR32_USBB_UHINTECLR_DCONNIEC_MASK) |
| disables USB device connection interrupt More... | |
| #define | Host_disable_device_disconnection_interrupt() (AVR32_USBB_uhinteclr = AVR32_USBB_UHINTECLR_DDISCIEC_MASK) |
| disables USB device connection interrupt More... | |
| #define | Host_disable_down_stream_resume_interrupt() (AVR32_USBB_uhinteclr = AVR32_USBB_UHINTECLR_RSMEDIEC_MASK) |
| disables host down stream resume sent interrupt detection More... | |
| #define | Host_disable_hwup_interrupt() (AVR32_USBB_uhinteclr = AVR32_USBB_UHINTECLR_HWUPIEC_MASK) |
| disables host wake-up interrupt detection More... | |
| #define | Host_disable_in_received_interrupt(p) (AVR32_USBB_upconxclr(p) = AVR32_USBB_UPCONXCLR_RXINEC_MASK) |
| disables IN pipe reception interrupt More... | |
| #define | Host_disable_nak_received_interrupt(p) (AVR32_USBB_upconxclr(p) = AVR32_USBB_UPCONXCLR_NAKEDEC_MASK) |
| disables NAK received interrupt More... | |
| #define | Host_disable_out_ready_interrupt(p) (AVR32_USBB_upconxclr(p) = AVR32_USBB_UPCONXCLR_TXOUTEC_MASK) |
| disables OUT pipe ready interrupt More... | |
| #define | Host_disable_overflow_interrupt(p) (AVR32_USBB_upconxclr(p) = AVR32_USBB_UPCONXCLR_OVERFIEC_MASK) |
| disables overflow interrupt More... | |
| #define | Host_disable_pipe(p) (Clr_bits(AVR32_USBB_uprst, AVR32_USBB_UPRST_PEN0_MASK << (p))) |
| disables the selected pipe More... | |
| #define | Host_disable_pipe_bank_autoswitch(p) (Clr_bits(AVR32_USBB_upcfgx(p), AVR32_USBB_UPCFGX_AUTOSW_MASK)) |
| disables the bank autoswitch for the selected pipe More... | |
| #define | Host_disable_pipe_dma_interrupt(pdma) (AVR32_USBB_uhinteclr = AVR32_USBB_UHINTECLR_DMA1INTEC_MASK << ((pdma) - 1)) |
| disables the selected pipe DMA channel interrupt More... | |
| #define | Host_disable_pipe_error_interrupt(p) (AVR32_USBB_upconxclr(p) = AVR32_USBB_UPCONXCLR_PERREC_MASK) |
| disables pipe error interrupt More... | |
| #define | Host_disable_pipe_int_dis_hdma_req(p) (AVR32_USBB_upconxclr(p) = AVR32_USBB_UPCONXCLR_PDISHDMAC_MASK) |
| disables the disabling of HDMA requests by pipe interrupts More... | |
| #define | Host_disable_pipe_interrupt(p) (AVR32_USBB_uhinteclr = AVR32_USBB_UHINTECLR_P0INTEC_MASK << (p)) |
| disables the selected pipe interrupt More... | |
| #define | Host_disable_remote_wakeup_interrupt() (AVR32_USBB_uhinteclr = AVR32_USBB_UHINTECLR_RXRSMIEC_MASK) |
| disables host remote wake-up interrupt detection More... | |
| #define | Host_disable_reset_sent_interrupt() (AVR32_USBB_uhinteclr = AVR32_USBB_UHINTECLR_RSTIEC_MASK) |
| disables host USB reset sent interrupt More... | |
| #define | Host_disable_setup_ready_interrupt() (AVR32_USBB_upconxclr(P_CONTROL) = AVR32_USBB_UPCONXCLR_TXSTPEC_MASK) |
| disables SETUP pipe ready interrupt More... | |
| #define | Host_disable_short_packet_interrupt(p) (AVR32_USBB_upconxclr(p) = AVR32_USBB_UPCONXCLR_SHORTPACKETIEC_MASK) |
| disables SHORT PACKET received interrupt More... | |
| #define | Host_disable_sof() (Clr_bits(AVR32_USBB_uhcon, AVR32_USBB_UHCON_SOFE_MASK)) |
| disables SOF generation More... | |
| #define | Host_disable_sof_interrupt() (AVR32_USBB_uhinteclr = AVR32_USBB_UHINTECLR_HSOFIEC_MASK) |
| enables host Start-of-Frame interrupt More... | |
| #define | Host_disable_stall_interrupt(p) (AVR32_USBB_upconxclr(p) = AVR32_USBB_UPCONXCLR_RXSTALLDEC_MASK) |
| disables STALL received interrupt More... | |
| #define | Host_disable_underflow_interrupt(p) (AVR32_USBB_upconxclr(p) = AVR32_USBB_UPCONXCLR_TXSTPEC_MASK) |
| disables underflow interrupt More... | |
| #define | Host_enable_bank_interrupt(p) (AVR32_USBB_upconxset(p) = AVR32_USBB_UPCONXSET_NBUSYBKES_MASK) |
| enables all banks full (IN) or free (OUT) interrupt More... | |
| #define | Host_enable_continuous_in_mode(p) (Set_bits(AVR32_USBB_upinrqx(p), AVR32_USBB_UPINRQX_INMODE_MASK)) |
| enables continuous IN mode More... | |
| #define | Host_enable_control_in_received_interrupt() (AVR32_USBB_upconxset(P_CONTROL) = AVR32_USBB_UPCONXSET_RXINES_MASK) |
| enables IN control pipe reception interrupt More... | |
| #define | Host_enable_control_out_ready_interrupt() (AVR32_USBB_upconxset(P_CONTROL) = AVR32_USBB_UPCONXSET_TXOUTES_MASK) |
| enables OUT control pipe ready interrupt More... | |
| #define | Host_enable_crc_error_interrupt(p) (AVR32_USBB_upconxset(p) = AVR32_USBB_UPCONXSET_RXSTALLDES_MASK) |
| enables CRC ERROR ISO IN detected interrupt More... | |
| #define | Host_enable_device_connection_interrupt() (AVR32_USBB_uhinteset = AVR32_USBB_UHINTESET_DCONNIES_MASK) |
| enables host device connection interrupt More... | |
| #define | Host_enable_device_disconnection_interrupt() (AVR32_USBB_uhinteset = AVR32_USBB_UHINTESET_DDISCIES_MASK) |
| enables host device disconnection interrupt More... | |
| #define | Host_enable_down_stream_resume_interrupt() (AVR32_USBB_uhinteset = AVR32_USBB_UHINTESET_RSMEDIES_MASK) |
| enables host down stream resume sent interrupt detection More... | |
| #define | Host_enable_hwup_interrupt() (AVR32_USBB_uhinteset = AVR32_USBB_UHINTESET_HWUPIES_MASK) |
| enables host wake-up interrupt detection More... | |
| #define | Host_enable_in_received_interrupt(p) (AVR32_USBB_upconxset(p) = AVR32_USBB_UPCONXSET_RXINES_MASK) |
| enables IN pipe reception interrupt More... | |
| #define | Host_enable_nak_received_interrupt(p) (AVR32_USBB_upconxset(p) = AVR32_USBB_UPCONXSET_NAKEDES_MASK) |
| enables NAK received interrupt More... | |
| #define | Host_enable_out_ready_interrupt(p) (AVR32_USBB_upconxset(p) = AVR32_USBB_UPCONXSET_TXOUTES_MASK) |
| enables OUT pipe ready interrupt More... | |
| #define | Host_enable_overflow_interrupt(p) (AVR32_USBB_upconxset(p) = AVR32_USBB_UPCONXSET_OVERFIES_MASK) |
| enables overflow interrupt More... | |
| #define | Host_enable_ping(p) (Set_bits(AVR32_USBB_upcfgx(p), AVR32_USBB_UPCFGX_PINGEN_MASK)) |
| Enable PING management for the endpoint p. More... | |
| #define | Host_enable_pipe(p) (Set_bits(AVR32_USBB_uprst, AVR32_USBB_UPRST_PEN0_MASK << (p))) |
| enables the selected pipe More... | |
| #define | Host_enable_pipe_bank_autoswitch(p) (Set_bits(AVR32_USBB_upcfgx(p), AVR32_USBB_UPCFGX_AUTOSW_MASK)) |
| enables the bank autoswitch for the selected pipe More... | |
| #define | Host_enable_pipe_dma_interrupt(pdma) (AVR32_USBB_uhinteset = AVR32_USBB_UHINTESET_DMA1INTES_MASK << ((pdma) - 1)) |
| enables the selected pipe DMA channel interrupt More... | |
| #define | Host_enable_pipe_error_interrupt(p) (AVR32_USBB_upconxset(p) = AVR32_USBB_UPCONXSET_PERRES_MASK) |
| enables pipe error interrupt More... | |
| #define | Host_enable_pipe_int_dis_hdma_req(p) (AVR32_USBB_upconxset(p) = AVR32_USBB_UPCONXSET_PDISHDMAS_MASK) |
| enables the disabling of HDMA requests by pipe interrupts More... | |
| #define | Host_enable_pipe_interrupt(p) (AVR32_USBB_uhinteset = AVR32_USBB_UHINTESET_P0INTES_MASK << (p)) |
| enables the selected pipe interrupt More... | |
| #define | Host_enable_remote_wakeup_interrupt() (AVR32_USBB_uhinteset = AVR32_USBB_UHINTESET_RXRSMIES_MASK) |
| enables host remote wake-up interrupt detection More... | |
| #define | Host_enable_reset_sent_interrupt() (AVR32_USBB_uhinteset = AVR32_USBB_UHINTESET_RSTIES_MASK) |
| enables host USB reset sent interrupt More... | |
| #define | Host_enable_setup_ready_interrupt() (AVR32_USBB_upconxset(P_CONTROL) = AVR32_USBB_UPCONXSET_TXSTPES_MASK) |
| enables SETUP pipe ready interrupt More... | |
| #define | Host_enable_short_packet_interrupt(p) (AVR32_USBB_upconxset(p) = AVR32_USBB_UPCONXSET_SHORTPACKETIES_MASK) |
| enables SHORT PACKET received interrupt More... | |
| #define | Host_enable_sof() (Set_bits(AVR32_USBB_uhcon, AVR32_USBB_UHCON_SOFE_MASK)) |
| enables SOF generation More... | |
| #define | Host_enable_sof_interrupt() (AVR32_USBB_uhinteset = AVR32_USBB_UHINTESET_HSOFIES_MASK) |
| enables host Start-of-Frame interrupt More... | |
| #define | Host_enable_stall_interrupt(p) (AVR32_USBB_upconxset(p) = AVR32_USBB_UPCONXSET_RXSTALLDES_MASK) |
| enables STALL received interrupt More... | |
| #define | Host_enable_underflow_interrupt(p) (AVR32_USBB_upconxset(p) = AVR32_USBB_UPCONXSET_TXSTPES_MASK) |
| enables underflow interrupt More... | |
| #define | Host_error_status(p) |
| tests if error occurs on pipe More... | |
| #define | Host_force_bank_interrupt(p) (AVR32_USBB_upstaxset(p) = AVR32_USBB_UPSTAXSET_NBUSYBKS_MASK) |
| forces all banks full (OUT) or free (IN) interrupt More... | |
| #define | Host_format_pipe_size(size) (32 - clz(((U32)min(max(size, 8), 1024) << 1) - 1) - 1 - 3) |
| Bounds given integer size to allowed range and rounds it up to the nearest available greater size, then applies register format of USBB controller for pipe size bit-field. More... | |
| #define | Host_frame_length() (Rd_bitfield(AVR32_USBB_uhfnum, AVR32_USBB_UHFNUM_FLENHIGH_MASK)) |
| returns the current frame length More... | |
| #define | Host_frame_number() (Rd_bitfield(AVR32_USBB_uhfnum, AVR32_USBB_UHFNUM_FNUM_MASK)) |
| returns the current frame number More... | |
| #define | Host_free_control_in() (Host_ack_fifocon(P_CONTROL)) |
| frees current bank for IN control pipe More... | |
| #define | Host_free_in(p) (Host_ack_fifocon(p)) |
| frees current bank for IN pipe More... | |
| #define | Host_freeze_pipe(p) (AVR32_USBB_upconxset(p) = AVR32_USBB_UPCONXSET_PFREEZES_MASK) |
| freezes the pipe More... | |
| #define | Host_get_configured_address(p) (Rd_bitfield(AVR32_USBB_uhaddrx(1 + ((p) >> 2)), AVR32_USBB_UHADDR1_UHADDR_P0_MASK << (((p) & 0x03) << 3))) |
| gets the currently configured USB device address associated with the selected pipe More... | |
| #define | Host_get_error_counter(p) (Rd_bitfield(AVR32_USBB_uperrx(p), AVR32_USBB_UPERRX_COUNTER_MASK)) |
| #define | Host_get_in_request_number(p) (Rd_bitfield(AVR32_USBB_upinrqx(p), AVR32_USBB_UPINRQX_INRQ_MASK) + 1) |
| returns number of remaining IN requests More... | |
| #define | Host_get_interrupt_pipe_number() |
| returns the lowest pipe number generating a pipe interrupt or MAX_PEP_NB if none More... | |
| #define | Host_get_pipe_bank(p) (Rd_bitfield(AVR32_USBB_upcfgx(p), AVR32_USBB_UPCFGX_PBK_MASK)) |
| gets the configured selected pipe number of banks More... | |
| #define | Host_get_pipe_endpoint_number(p) (Rd_bitfield(AVR32_USBB_upcfgx(p), AVR32_USBB_UPCFGX_PEPNUM_MASK)) |
| gets the configured selected pipe endpoint number More... | |
| #define | Host_get_pipe_fifo_access(p, scale) (AVR32_USBB_FIFOX_DATA(p, scale)) |
| Get 64-, 32-, 16- or 8-bit access to FIFO data register of selected pipe. More... | |
| #define | Host_get_pipe_int_req_freq(p) (Rd_bitfield(AVR32_USBB_upcfgx(p), AVR32_USBB_UPCFGX_INTFRQ_MASK)) |
| gets the configured interrupt pipe request frequency (period in ms) for the selected pipe More... | |
| #define | Host_get_pipe_size(p) (8 << Rd_bitfield(AVR32_USBB_upcfgx(p), AVR32_USBB_UPCFGX_PSIZE_MASK)) |
| gets the configured selected pipe size More... | |
| #define | Host_get_pipe_token(p) (Rd_bitfield(AVR32_USBB_upcfgx(p), AVR32_USBB_UPCFGX_PTOKEN_MASK)) |
| gets the configured selected pipe token More... | |
| #define | Host_get_pipe_type(p) (Rd_bitfield(AVR32_USBB_upcfgx(p), AVR32_USBB_UPCFGX_PTYPE_MASK)) |
| gets the configured selected pipe type More... | |
| #define | Host_in_request_number(p, in_num) (Wr_bitfield(AVR32_USBB_upinrqx(p), AVR32_USBB_UPINRQX_INRQ_MASK, (in_num) - 1)) |
| sets number of IN requests to perform before freeze More... | |
| #define | Host_nb_busy_bank(p) (Rd_bitfield(AVR32_USBB_upstax(p), AVR32_USBB_UPSTAX_NBUSYBK_MASK)) |
| returns the number of busy banks More... | |
| #define | Host_raise_control_in_received() (AVR32_USBB_upstaxset(P_CONTROL) = AVR32_USBB_UPSTAXSET_RXINIS_MASK) |
| raises control IN More... | |
| #define | Host_raise_control_out_ready() (AVR32_USBB_upstaxset(P_CONTROL) = AVR32_USBB_UPSTAXSET_TXOUTIS_MASK) |
| raises control OUT More... | |
| #define | Host_raise_crc_error(p) (AVR32_USBB_upstaxset(p) = AVR32_USBB_UPSTAXSET_RXSTALLDIS_MASK) |
| raises CRC ERROR ISO IN detected More... | |
| #define | Host_raise_device_connection() (AVR32_USBB_uhintset = AVR32_USBB_UHINTSET_DCONNIS_MASK) |
| raises device connection More... | |
| #define | Host_raise_device_disconnection() (AVR32_USBB_uhintset = AVR32_USBB_UHINTSET_DDISCIS_MASK) |
| raises device disconnection More... | |
| #define | Host_raise_down_stream_resume() (AVR32_USBB_uhintset = AVR32_USBB_UHINTSET_RSMEDIS_MASK) |
| raises host down stream resume sent More... | |
| #define | Host_raise_hwup() (AVR32_USBB_uhintset = AVR32_USBB_UHINTSET_HWUPIS_MASK) |
| raises host wake-up detection More... | |
| #define | Host_raise_in_received(p) (AVR32_USBB_upstaxset(p) = AVR32_USBB_UPSTAXSET_RXINIS_MASK) |
| raises IN reception More... | |
| #define | Host_raise_nak_received(p) (AVR32_USBB_upstaxset(p) = AVR32_USBB_UPSTAXSET_NAKEDIS_MASK) |
| raises NAK received More... | |
| #define | Host_raise_out_ready(p) (AVR32_USBB_upstaxset(p) = AVR32_USBB_UPSTAXSET_TXOUTIS_MASK) |
| raises OUT sent More... | |
| #define | Host_raise_overflow_interrupt(p) (AVR32_USBB_upstaxset(p) = AVR32_USBB_UPSTAXSET_OVERFIS_MASK) |
| raises pipe overflow interrupt More... | |
| #define | Host_raise_pipe_dma_interrupt(pdma) (AVR32_USBB_uhintset = AVR32_USBB_UHINTSET_DMA1INTS_MASK << ((pdma) - 1)) |
| raises the selected pipe DMA channel interrupt More... | |
| #define | Host_raise_pipe_error(p) (AVR32_USBB_upstaxset(p) = (Is_host_pipe_error(p)) ? 0 : AVR32_USBB_UPSTAXSET_PERRIS_MASK) |
| raises pipe error More... | |
| #define | Host_raise_remote_wakeup() (AVR32_USBB_uhintset = AVR32_USBB_UHINTSET_RXRSMIS_MASK) |
| raises host remote wake-up detection More... | |
| #define | Host_raise_reset_sent() (AVR32_USBB_uhintset = AVR32_USBB_UHINTSET_RSTIS_MASK) |
| raises host USB reset sent More... | |
| #define | Host_raise_setup_ready() (AVR32_USBB_upstaxset(P_CONTROL) = AVR32_USBB_UPSTAXSET_TXSTPIS_MASK) |
| raises setup More... | |
| #define | Host_raise_short_packet(p) (AVR32_USBB_upstaxset(p) = AVR32_USBB_UPSTAXSET_SHORTPACKETIS_MASK) |
| raises SHORT PACKET received More... | |
| #define | Host_raise_sof() (AVR32_USBB_uhintset = AVR32_USBB_UHINTSET_HSOFIS_MASK) |
| raises SOF detection More... | |
| #define | Host_raise_stall(p) (AVR32_USBB_upstaxset(p) = AVR32_USBB_UPSTAXSET_RXSTALLDIS_MASK) |
| raises STALL reception More... | |
| #define | Host_raise_underflow_interrupt(p) (AVR32_USBB_upstaxset(p) = AVR32_USBB_UPSTAXSET_TXSTPIS_MASK) |
| raises pipe underflow interrupt More... | |
| #define | Host_read_pipe_data(p, scale) |
| Read 64-, 32-, 16- or 8-bit data from FIFO data register of selected pipe. More... | |
| #define | Host_read_pipe_indexed_data(p, scale, index) (AVR32_USBB_FIFOX_DATA(p, scale)[(index)]) |
| Read 64-, 32-, 16- or 8-bit indexed data from FIFO data register of selected pipe. More... | |
| #define | Host_reset_data_toggle(p) (AVR32_USBB_upconxset(p) = AVR32_USBB_UPCONXSET_RSTDTS_MASK) |
| resets the data toggle sequence More... | |
| #define | Host_reset_pipe(p) |
| resets the selected pipe More... | |
| #define | Host_reset_pipe_fifo_access(p) (pep_fifo[(p)].u64ptr = Host_get_pipe_fifo_access(p, 64)) |
| Reset known position inside FIFO data register of selected pipe. More... | |
| #define | Host_send_control_out() (Host_ack_fifocon(P_CONTROL)) |
| sends current bank for OUT control pipe More... | |
| #define | Host_send_out(p) (Host_ack_fifocon(p)) |
| sends current bank for OUT pipe More... | |
| #define | Host_send_reset() (Set_bits(AVR32_USBB_uhcon, AVR32_USBB_UHCON_RESET_MASK)) |
| sends a USB Reset to the device More... | |
| #define | Host_send_resume() (Set_bits(AVR32_USBB_uhcon, AVR32_USBB_UHCON_RESUME_MASK)) |
| sends a USB Resume to the device More... | |
| #define | Host_send_setup() (Host_ack_fifocon(P_CONTROL)) |
| sends current bank for SETUP pipe More... | |
| #define | Host_set_frame_number(fnum) (Wr_bitfield(AVR32_USBB_uhfnum, AVR32_USBB_UHFNUM_FNUM_MASK, fnum)) |
| sets the current frame number More... | |
| #define | Host_stop_sending_reset() (Clr_bits(AVR32_USBB_uhcon, AVR32_USBB_UHCON_RESET_MASK)) |
| stops sending a USB Reset to the device More... | |
| #define | Host_unallocate_memory(p) (Clr_bits(AVR32_USBB_upcfgx(p), AVR32_USBB_UPCFGX_ALLOC_MASK)) |
| un-allocates the configuration x in DPRAM memory More... | |
| #define | Host_unforce_bank_interrupt(p) (AVR32_USBB_upstaxset(p) = AVR32_USBB_UPSTAXSET_NBUSYBKS_MASK) |
| unforces all banks full (OUT) or free (IN) interrupt More... | |
| #define | Host_unfreeze_pipe(p) (AVR32_USBB_upconxclr(p) = AVR32_USBB_UPCONXCLR_PFREEZEC_MASK) |
| unfreezees the pipe More... | |
| #define | Host_write_pipe_data(p, scale, data) |
| Write 64-, 32-, 16- or 8-bit data to FIFO data register of selected pipe. More... | |
| #define | Host_write_pipe_indexed_data(p, scale, index, data) (AVR32_USBB_FIFOX_DATA(p, scale)[(index)] = (data)) |
| Write 64-, 32-, 16- or 8-bit indexed data to FIFO data register of selected pipe. More... | |
| #define | IP_NAME_PART_1 1 |
| #define | IP_NAME_PART_2 2 |
| #define | Is_host_bad_data_toggle(p) (Tst_bits(AVR32_USBB_uperrx(p), AVR32_USBB_UPERRX_DATATGL_MASK)) |
| #define | Is_host_bank_interrupt_enabled(p) (Tst_bits(AVR32_USBB_upconx(p), AVR32_USBB_UPCONX_NBUSYBKE_MASK)) |
| tests if all banks full (IN) or free (OUT) interrupt is enabled More... | |
| #define | Is_host_continuous_in_mode_enabled(p) (Tst_bits(AVR32_USBB_upinrqx(p), AVR32_USBB_UPINRQX_INMODE_MASK)) |
| tests if continuous IN mode is enabled More... | |
| #define | Is_host_control_in_filled() (Is_host_fifocon(P_CONTROL)) |
| tests if IN received in current bank for control pipe More... | |
| #define | Is_host_control_in_received() (Tst_bits(AVR32_USBB_upstax(P_CONTROL), AVR32_USBB_UPSTAX_RXINI_MASK)) |
| tests if control IN has been received More... | |
| #define | Is_host_control_in_received_interrupt_enabled() (Tst_bits(AVR32_USBB_upconx(P_CONTROL), AVR32_USBB_UPCONX_RXINE_MASK)) |
| tests if IN control pipe reception interrupt is enabled More... | |
| #define | Is_host_control_out_ready() (Tst_bits(AVR32_USBB_upstax(P_CONTROL), AVR32_USBB_UPSTAX_TXOUTI_MASK)) |
| tests if control OUT has been sent More... | |
| #define | Is_host_control_out_ready_interrupt_enabled() (Tst_bits(AVR32_USBB_upconx(P_CONTROL), AVR32_USBB_UPCONX_TXOUTE_MASK)) |
| tests if OUT control pipe ready interrupt is enabled More... | |
| #define | Is_host_control_out_sent() (Is_host_fifocon(P_CONTROL)) |
| tests if current bank sent for OUT control pipe More... | |
| #define | Is_host_crc16_error(p) (Tst_bits(AVR32_USBB_uperrx(p), AVR32_USBB_UPERRX_CRC16_MASK)) |
| #define | Is_host_crc_error(p) (Tst_bits(AVR32_USBB_upstax(p), AVR32_USBB_UPSTAX_RXSTALLDI_MASK)) |
| tests if CRC ERROR ISO IN detected More... | |
| #define | Is_host_crc_error_interrupt_enabled(p) (Tst_bits(AVR32_USBB_upconx(p), AVR32_USBB_UPCONX_RXSTALLDE_MASK)) |
| tests if CRC ERROR ISO IN detected interrupt is enabled More... | |
| #define | Is_host_data_pid_error(p) (Tst_bits(AVR32_USBB_uperrx(p), AVR32_USBB_UPERRX_DATAPID_MASK)) |
| #define | Is_host_data_toggle_reset(p) (Tst_bits(AVR32_USBB_upconx(p), AVR32_USBB_UPCONX_RSTDT_MASK)) |
| tests if the data toggle sequence is being reset More... | |
| #define | Is_host_device_connection() (Tst_bits(AVR32_USBB_uhint, AVR32_USBB_UHINT_DCONNI_MASK)) |
| tests if a USB device has been detected More... | |
| #define | Is_host_device_connection_interrupt_enabled() (Tst_bits(AVR32_USBB_uhinte, AVR32_USBB_UHINTE_DCONNIE_MASK)) |
| #define | Is_host_device_disconnection() (Tst_bits(AVR32_USBB_uhint, AVR32_USBB_UHINT_DDISCI_MASK)) |
| tests if a USB device has been removed More... | |
| #define | Is_host_device_disconnection_interrupt_enabled() (Tst_bits(AVR32_USBB_uhinte, AVR32_USBB_UHINTE_DDISCIE_MASK)) |
| #define | Is_host_down_stream_resume() (Tst_bits(AVR32_USBB_uhint, AVR32_USBB_UHINT_RSMEDI_MASK)) |
| #define | Is_host_down_stream_resume_interrupt_enabled() (Tst_bits(AVR32_USBB_uhinte, AVR32_USBB_UHINTE_RSMEDIE_MASK)) |
| #define | Is_host_fifocon(p) (Tst_bits(AVR32_USBB_upconx(p), AVR32_USBB_UPCONX_FIFOCON_MASK)) |
| tests if FIFOCON bit set More... | |
| #define | Is_host_hwup() (Tst_bits(AVR32_USBB_uhint, AVR32_USBB_UHINT_HWUPI_MASK)) |
| tests if host wake-up detected More... | |
| #define | Is_host_hwup_interrupt_enabled() (Tst_bits(AVR32_USBB_uhinte, AVR32_USBB_UHINTE_HWUPIE_MASK)) |
| #define | Is_host_in_filled(p) (Is_host_fifocon(p)) |
| tests if IN received in current bank More... | |
| #define | Is_host_in_received(p) (Tst_bits(AVR32_USBB_upstax(p), AVR32_USBB_UPSTAX_RXINI_MASK)) |
| tests if IN received More... | |
| #define | Is_host_in_received_interrupt_enabled(p) (Tst_bits(AVR32_USBB_upconx(p), AVR32_USBB_UPCONX_RXINE_MASK)) |
| tests if IN pipe reception interrupt is enabled More... | |
| #define | Is_host_memory_allocated(p) (Tst_bits(AVR32_USBB_upcfgx(p), AVR32_USBB_UPCFGX_ALLOC_MASK)) |
| #define | Is_host_nak_received(p) (Tst_bits(AVR32_USBB_upstax(p), AVR32_USBB_UPSTAX_NAKEDI_MASK)) |
| tests if NAK handshake has been received More... | |
| #define | Is_host_nak_received_interrupt_enabled(p) (Tst_bits(AVR32_USBB_upconx(p), AVR32_USBB_UPCONX_NAKEDE_MASK)) |
| tests if NAK received interrupt is enabled More... | |
| #define | Is_host_out_ready(p) (Tst_bits(AVR32_USBB_upstax(p), AVR32_USBB_UPSTAX_TXOUTI_MASK)) |
| tests if OUT has been sent More... | |
| #define | Is_host_out_ready_interrupt_enabled(p) (Tst_bits(AVR32_USBB_upconx(p), AVR32_USBB_UPCONX_TXOUTE_MASK)) |
| tests if OUT pipe ready interrupt is enabled More... | |
| #define | Is_host_out_sent(p) (Is_host_fifocon(p)) |
| tests if current bank sent for OUT pipe More... | |
| #define | Is_host_overflow(p) (Tst_bits(AVR32_USBB_upstax(p), AVR32_USBB_UPSTAX_OVERFI_MASK)) |
| tests if an overflow occurs More... | |
| #define | Is_host_overflow_interrupt_enabled(p) (Tst_bits(AVR32_USBB_upconx(p), AVR32_USBB_UPCONX_OVERFIE_MASK)) |
| tests if overflow interrupt is enabled More... | |
| #define | Is_host_pid_error(p) (Tst_bits(AVR32_USBB_uperrx(p), AVR32_USBB_UPERRX_PID_MASK)) |
| #define | Is_host_pipe_bank_autoswitch_enabled(p) (Tst_bits(AVR32_USBB_upcfgx(p), AVR32_USBB_UPCFGX_AUTOSW_MASK)) |
| #define | Is_host_pipe_configured(p) (Tst_bits(AVR32_USBB_upstax(p), AVR32_USBB_UPSTAX_CFGOK_MASK)) |
| tests if current pipe is configured More... | |
| #define | Is_host_pipe_dma_interrupt(pdma) (Tst_bits(AVR32_USBB_uhint, AVR32_USBB_UHINT_DMA1INT_MASK << ((pdma) - 1))) |
| tests if an interrupt is triggered by the selected pipe DMA channel More... | |
| #define | Is_host_pipe_dma_interrupt_enabled(pdma) (Tst_bits(AVR32_USBB_uhinte, AVR32_USBB_UHINTE_DMA1INTE_MASK << ((pdma) - 1))) |
| tests if the selected pipe DMA channel interrupt is enabled More... | |
| #define | Is_host_pipe_enabled(p) (Tst_bits(AVR32_USBB_uprst, AVR32_USBB_UPRST_PEN0_MASK << (p))) |
| tests if the selected pipe is enabled More... | |
| #define | Is_host_pipe_error(p) (Tst_bits(AVR32_USBB_upstax(p), AVR32_USBB_UPSTAX_PERRI_MASK)) |
| tests if an error occurs on current pipe More... | |
| #define | Is_host_pipe_error_interrupt_enabled(p) (Tst_bits(AVR32_USBB_upconx(p), AVR32_USBB_UPCONX_PERRE_MASK)) |
| tests if pipe error interrupt is enabled More... | |
| #define | Is_host_pipe_frozen(p) (Tst_bits(AVR32_USBB_upconx(p), AVR32_USBB_UPCONX_PFREEZE_MASK)) |
| tests if the current pipe is frozen More... | |
| #define | Is_host_pipe_int_dis_hdma_req_enabled(p) (Tst_bits(AVR32_USBB_upconx(p), AVR32_USBB_UPCONX_PDISHDMA_MASK)) |
| tests if the disabling of HDMA requests by pipe interrupts si enabled More... | |
| #define | Is_host_pipe_interrupt(p) (Tst_bits(AVR32_USBB_uhint, AVR32_USBB_UHINT_P0INT_MASK << (p))) |
| tests if an interrupt is triggered by the selected pipe More... | |
| #define | Is_host_pipe_interrupt_enabled(p) (Tst_bits(AVR32_USBB_uhinte, AVR32_USBB_UHINTE_P0INTE_MASK << (p))) |
| tests if the selected pipe interrupt is enabled More... | |
| #define | Is_host_read_enabled(p) (Tst_bits(AVR32_USBB_upstax(p), AVR32_USBB_UPSTAX_RWALL_MASK)) |
| tests if pipe read allowed More... | |
| #define | Is_host_remote_wakeup() (Tst_bits(AVR32_USBB_uhint, AVR32_USBB_UHINT_RXRSMI_MASK)) |
| tests if host remote wake-up detected More... | |
| #define | Is_host_remote_wakeup_interrupt_enabled() (Tst_bits(AVR32_USBB_uhinte, AVR32_USBB_UHINTE_RXRSMIE_MASK)) |
| #define | Is_host_reset_sent() (Tst_bits(AVR32_USBB_uhint, AVR32_USBB_UHINT_RSTI_MASK)) |
| tests if host USB reset sent More... | |
| #define | Is_host_reset_sent_interrupt_enabled() (Tst_bits(AVR32_USBB_uhinte, AVR32_USBB_UHINTE_RSTIE_MASK)) |
| #define | Is_host_resetting_pipe(p) (Tst_bits(AVR32_USBB_uprst, AVR32_USBB_UPRST_PRST0_MASK << (p))) |
| tests if the selected pipe is being reset More... | |
| #define | Is_host_sending_reset() (Tst_bits(AVR32_USBB_uhcon, AVR32_USBB_UHCON_RESET_MASK)) |
| tests if USB Reset running More... | |
| #define | Is_host_sending_resume() (Tst_bits(AVR32_USBB_uhcon, AVR32_USBB_UHCON_RESUME_MASK)) |
| tests if USB Resume running More... | |
| #define | Is_host_setup_ready() (Tst_bits(AVR32_USBB_upstax(P_CONTROL), AVR32_USBB_UPSTAX_TXSTPI_MASK)) |
| tests if SETUP has been sent More... | |
| #define | Is_host_setup_ready_interrupt_enabled() (Tst_bits(AVR32_USBB_upconx(P_CONTROL), AVR32_USBB_UPCONX_TXSTPE_MASK)) |
| tests if SETUP pipe ready interrupt is enabled More... | |
| #define | Is_host_setup_sent() (Is_host_fifocon(P_CONTROL)) |
| tests if current bank sent for SETUP pipe More... | |
| #define | Is_host_short_packet(p) (Tst_bits(AVR32_USBB_upstax(p), AVR32_USBB_UPSTAX_SHORTPACKETI_MASK)) |
| tests if SHORT PACKET received More... | |
| #define | Is_host_short_packet_interrupt_enabled(p) (Tst_bits(AVR32_USBB_upconx(p), AVR32_USBB_UPCONX_SHORTPACKETIE_MASK)) |
| tests if SHORT PACKET received interrupt is enabled More... | |
| #define | Is_host_sof() (Tst_bits(AVR32_USBB_uhint, AVR32_USBB_UHINT_HSOFI_MASK)) |
| tests if SOF detected More... | |
| #define | Is_host_sof_enabled() (Tst_bits(AVR32_USBB_uhcon, AVR32_USBB_UHCON_SOFE_MASK)) |
| tests if SOF generation enabled More... | |
| #define | Is_host_sof_interrupt_enabled() (Tst_bits(AVR32_USBB_uhinte, AVR32_USBB_UHINTE_HSOFIE_MASK)) |
| #define | Is_host_stall(p) (Tst_bits(AVR32_USBB_upstax(p), AVR32_USBB_UPSTAX_RXSTALLDI_MASK)) |
| tests if a STALL has been received More... | |
| #define | Is_host_stall_interrupt_enabled(p) (Tst_bits(AVR32_USBB_upconx(p), AVR32_USBB_UPCONX_RXSTALLDE_MASK)) |
| tests if STALL received interrupt is enabled More... | |
| #define | Is_host_timeout_error(p) (Tst_bits(AVR32_USBB_uperrx(p), AVR32_USBB_UPERRX_TIMEOUT_MASK)) |
| #define | Is_host_underflow(p) (Tst_bits(AVR32_USBB_upstax(p), AVR32_USBB_UPSTAX_TXSTPI_MASK)) |
| tests if an underflow occurs More... | |
| #define | Is_host_underflow_interrupt_enabled(p) (Tst_bits(AVR32_USBB_upconx(p), AVR32_USBB_UPCONX_TXSTPE_MASK)) |
| tests if underflow interrupt is enabled More... | |
| #define | Is_host_write_enabled(p) (Tst_bits(AVR32_USBB_upstax(p), AVR32_USBB_UPSTAX_RWALL_MASK)) |
| tests if pipe write allowed More... | |
| #define | Is_usb_address_enabled() (Tst_bits(AVR32_USBB_udcon, AVR32_USBB_UDCON_ADDEN_MASK)) |
| #define | Is_usb_bank_interrupt_enabled(ep) (Tst_bits(AVR32_USBB_ueconx(ep), AVR32_USBB_UECONX_NBUSYBKE_MASK)) |
| tests if all banks full (OUT) or free (IN) interrupt enabled More... | |
| #define | Is_usb_bconnection_error_interrupt() (Tst_bits(AVR32_USBB_usbsta, AVR32_USBB_USBSTA_BCERRI_MASK)) |
| tests if a B-device connection error occurs More... | |
| #define | Is_usb_bconnection_error_interrupt_enabled() (Tst_bits(AVR32_USBB_usbcon, AVR32_USBB_USBCON_BCERRE_MASK)) |
| #define | Is_usb_clock_frozen() (Tst_bits(AVR32_USBB_usbcon, AVR32_USBB_USBCON_FRZCLK_MASK)) |
| #define | Is_usb_control_in_ready() (Tst_bits(AVR32_USBB_uestax(EP_CONTROL), AVR32_USBB_UESTAX_TXINI_MASK)) |
| tests if IN ready on control endpoint More... | |
| #define | Is_usb_control_in_ready_interrupt_enabled() (Tst_bits(AVR32_USBB_ueconx(EP_CONTROL), AVR32_USBB_UECONX_TXINE_MASK)) |
| tests if IN ready on control endpoint interrupt is enabled More... | |
| #define | Is_usb_control_out_received() (Tst_bits(AVR32_USBB_uestax(EP_CONTROL), AVR32_USBB_UESTAX_RXOUTI_MASK)) |
| tests if OUT received on control endpoint More... | |
| #define | Is_usb_control_out_received_interrupt_enabled() (Tst_bits(AVR32_USBB_ueconx(EP_CONTROL), AVR32_USBB_UECONX_RXOUTE_MASK)) |
| tests if OUT received on control endpoint interrupt is enabled More... | |
| #define | Is_usb_crc_error(ep) (Tst_bits(AVR32_USBB_uestax(ep), AVR32_USBB_UESTAX_STALLEDI_MASK)) |
| tests if CRC ERROR ISO OUT detected More... | |
| #define | Is_usb_crc_error_interrupt_enabled(ep) (Tst_bits(AVR32_USBB_ueconx(ep), AVR32_USBB_UECONX_STALLEDE_MASK)) |
| tests if CRC ERROR ISO OUT detected interrupt is enabled More... | |
| #define | Is_usb_data_srp_method_selected() (!Is_usb_vbus_srp_method_selected()) |
| #define | Is_usb_data_toggle_reset(ep) (Tst_bits(AVR32_USBB_ueconx(ep), AVR32_USBB_UECONX_RSTDT_MASK)) |
| tests if the data toggle sequence is being reset More... | |
| #define | Is_usb_detached() (Tst_bits(AVR32_USBB_udcon, AVR32_USBB_UDCON_DETACH_MASK)) |
| test if the device is detached More... | |
| #define | Is_usb_device_mode_forced() (!Is_usb_id_pin_enabled() && Tst_bits(AVR32_USBB_usbcon, AVR32_USBB_USBCON_UIMOD_MASK)) |
| Test if device mode is forced. More... | |
| #define | Is_usb_device_srp() (Tst_bits(AVR32_USBB_usbcon, AVR32_USBB_USBCON_SRPREQ_MASK)) |
| tests if a SRP from device occurs More... | |
| #define | Is_usb_dpram_byte_write_capable() (Tst_bits(AVR32_USBB_ufeatures, AVR32_USBB_UFEATURES_BYTE_WRITE_DPRAM_MASK)) |
| Test if DPRAM is natively byte write capable. More... | |
| #define | Is_usb_enabled() (Tst_bits(AVR32_USBB_usbcon, AVR32_USBB_USBCON_USBE_MASK)) |
| #define | Is_usb_endpoint_bank_autoswitch_enabled(ep) (Tst_bits(AVR32_USBB_uecfgx(ep), AVR32_USBB_UECFGX_AUTOSW_MASK)) |
| #define | Is_usb_endpoint_configured(ep) (Tst_bits(AVR32_USBB_uestax(ep), AVR32_USBB_UESTAX_CFGOK_MASK)) |
| tests if current endpoint is configured More... | |
| #define | Is_usb_endpoint_dma_interrupt(epdma) (Tst_bits(AVR32_USBB_udint, AVR32_USBB_UDINT_DMA1INT_MASK << ((epdma) - 1))) |
| tests if an interrupt is triggered by the selected endpoint DMA channel More... | |
| #define | Is_usb_endpoint_dma_interrupt_enabled(epdma) (Tst_bits(AVR32_USBB_udinte, AVR32_USBB_UDINTE_DMA1INTE_MASK << ((epdma) - 1))) |
| tests if the selected endpoint DMA channel interrupt is enabled More... | |
| #define | Is_usb_endpoint_enabled(ep) (Tst_bits(AVR32_USBB_uerst, AVR32_USBB_UERST_EPEN0_MASK << (ep))) |
| tests if the selected endpoint is enabled More... | |
| #define | Is_usb_endpoint_int_dis_hdma_req_enabled(ep) (Tst_bits(AVR32_USBB_ueconx(ep), AVR32_USBB_UECONX_EPDISHDMA_MASK)) |
| tests if the disabling of HDMA requests by endpoint interrupts is enabled More... | |
| #define | Is_usb_endpoint_interrupt(ep) (Tst_bits(AVR32_USBB_udint, AVR32_USBB_UDINT_EP0INT_MASK << (ep))) |
| tests if an interrupt is triggered by the selected endpoint More... | |
| #define | Is_usb_endpoint_interrupt_enabled(ep) (Tst_bits(AVR32_USBB_udinte, AVR32_USBB_UDINTE_EP0INTE_MASK << (ep))) |
| tests if the selected endpoint interrupt is enabled More... | |
| #define | Is_usb_endpoint_stall_requested(ep) (Tst_bits(AVR32_USBB_ueconx(ep), AVR32_USBB_UECONX_STALLRQ_MASK)) |
| tests if STALL handshake request is running More... | |
| #define | Is_usb_fifocon(ep) (Tst_bits(AVR32_USBB_ueconx(ep), AVR32_USBB_UECONX_FIFOCON_MASK)) |
| tests if FIFOCON bit set More... | |
| #define | Is_usb_frame_number_crc_error() (Tst_bits(AVR32_USBB_udfnum, AVR32_USBB_UDFNUM_FNCERR_MASK)) |
| tests if a crc error occurs in frame number More... | |
| #define | Is_usb_full_speed_mode() (Rd_bitfield(AVR32_USBB_usbsta, AVR32_USBB_USBSTA_SPEED_MASK) == AVR32_USBB_USBSTA_SPEED_FULL) |
| Test if controller is in full speed mode. More... | |
| #define | Is_usb_full_speed_mode_used() (!Is_usb_low_speed_mode_forced()) |
| Test if device full speed mode is used. More... | |
| #define | Is_usb_hnp() (Tst_bits(AVR32_USBB_usbcon, AVR32_USBB_USBCON_HNPREQ_MASK)) |
| tests if a HNP occurs More... | |
| #define | Is_usb_hnp_error_interrupt() (Tst_bits(AVR32_USBB_usbsta, AVR32_USBB_USBSTA_HNPERRI_MASK)) |
| tests if a HNP error occurs More... | |
| #define | Is_usb_hnp_error_interrupt_enabled() (Tst_bits(AVR32_USBB_usbcon, AVR32_USBB_USBCON_HNPERRE_MASK)) |
| #define | Is_usb_host_mode_forced() (!Is_usb_id_pin_enabled() && !Tst_bits(AVR32_USBB_usbcon, AVR32_USBB_USBCON_UIMOD_MASK)) |
| Test if host mode is forced. More... | |
| #define | Is_usb_id_device() (Tst_bits(AVR32_USBB_usbsta, AVR32_USBB_USBSTA_ID_MASK)) |
| #define | Is_usb_id_interrupt_enabled() (Tst_bits(AVR32_USBB_usbcon, AVR32_USBB_USBCON_IDTE_MASK)) |
| #define | Is_usb_id_pin_enabled() (Tst_bits(AVR32_USBB_usbcon, AVR32_USBB_USBCON_UIDE_MASK)) |
| Test if external USB_ID pin enabled (listened to by USB) More... | |
| #define | Is_usb_id_pin_input() |
| Test if USB_ID is input from its pin. More... | |
| #define | Is_usb_id_transition() (Tst_bits(AVR32_USBB_usbsta, AVR32_USBB_USBSTA_IDTI_MASK)) |
| #define | Is_usb_in_ready(ep) (Tst_bits(AVR32_USBB_uestax(ep), AVR32_USBB_UESTAX_TXINI_MASK)) |
| tests if IN ready More... | |
| #define | Is_usb_in_ready_interrupt_enabled(ep) (Tst_bits(AVR32_USBB_ueconx(ep), AVR32_USBB_UECONX_TXINE_MASK)) |
| tests if IN ready interrupt is enabled More... | |
| #define | Is_usb_in_sent(ep) (Is_usb_fifocon(ep)) |
| tests if current bank sent for IN endpoint More... | |
| #define | Is_usb_last_in_bank_killed(ep) (Tst_bits(AVR32_USBB_ueconx(ep), AVR32_USBB_UECONX_KILLBK_MASK)) |
| tests if last bank killed More... | |
| #define | Is_usb_low_speed_mode() (Rd_bitfield(AVR32_USBB_usbsta, AVR32_USBB_USBSTA_SPEED_MASK) == AVR32_USBB_USBSTA_SPEED_LOW) |
| Test if controller is in low-speed mode. More... | |
| #define | Is_usb_low_speed_mode_forced() (Tst_bits(AVR32_USBB_udcon, AVR32_USBB_UDCON_LS_MASK)) |
| Test if device low-speed mode is forced. More... | |
| #define | Is_usb_memory_allocated(ep) (Tst_bits(AVR32_USBB_uecfgx(ep), AVR32_USBB_UECFGX_ALLOC_MASK)) |
| #define | Is_usb_nak_in(ep) (Tst_bits(AVR32_USBB_uestax(ep), AVR32_USBB_UESTAX_NAKINI_MASK)) |
| tests if NAK IN received More... | |
| #define | Is_usb_nak_in_interrupt_enabled(ep) (Tst_bits(AVR32_USBB_ueconx(ep), AVR32_USBB_UECONX_NAKINE_MASK)) |
| tests if NAK IN interrupt is enabled More... | |
| #define | Is_usb_nak_out(ep) (Tst_bits(AVR32_USBB_uestax(ep), AVR32_USBB_UESTAX_NAKOUTI_MASK)) |
| tests if NAK OUT received More... | |
| #define | Is_usb_nak_out_interrupt_enabled(ep) (Tst_bits(AVR32_USBB_ueconx(ep), AVR32_USBB_UECONX_NAKOUTE_MASK)) |
| tests if NAK OUT interrupt is enabled More... | |
| #define | Is_usb_otg_pad_enabled() (Tst_bits(AVR32_USBB_usbcon, AVR32_USBB_USBCON_OTGPADE_MASK)) |
| #define | Is_usb_out_filled(ep) (Is_usb_fifocon(ep)) |
| tests if current bank filled for OUT endpoint More... | |
| #define | Is_usb_out_received(ep) (Tst_bits(AVR32_USBB_uestax(ep), AVR32_USBB_UESTAX_RXOUTI_MASK)) |
| tests if OUT received More... | |
| #define | Is_usb_out_received_interrupt_enabled(ep) (Tst_bits(AVR32_USBB_ueconx(ep), AVR32_USBB_UECONX_RXOUTE_MASK)) |
| tests if OUT received interrupt is enabled More... | |
| #define | Is_usb_overflow(ep) (Tst_bits(AVR32_USBB_uestax(ep), AVR32_USBB_UESTAX_OVERFI_MASK)) |
| tests if an overflow occurs More... | |
| #define | Is_usb_overflow_interrupt_enabled(ep) (Tst_bits(AVR32_USBB_ueconx(ep), AVR32_USBB_UECONX_OVERFE_MASK)) |
| tests if overflow interrupt is enabled More... | |
| #define | Is_usb_pending_remote_wake_up() (Tst_bits(AVR32_USBB_udcon, AVR32_USBB_UDCON_RMWKUP_MASK)) |
| test if remote wake-up still running More... | |
| #define | Is_usb_read_enabled(ep) (Tst_bits(AVR32_USBB_uestax(ep), AVR32_USBB_UESTAX_RWALL_MASK)) |
| tests if endpoint read allowed More... | |
| #define | Is_usb_remote_wake_up_interrupt_enabled() (Tst_bits(AVR32_USBB_udinte, AVR32_USBB_UDINTE_UPRSME_MASK)) |
| #define | Is_usb_remote_wake_up_start() (Tst_bits(AVR32_USBB_udint, AVR32_USBB_UDINT_UPRSM_MASK)) |
| tests if remote wake-up still running More... | |
| #define | Is_usb_reset() (Tst_bits(AVR32_USBB_udint, AVR32_USBB_UDINT_EORST_MASK)) |
| tests if USB reset occurs More... | |
| #define | Is_usb_reset_interrupt_enabled() (Tst_bits(AVR32_USBB_udinte, AVR32_USBB_UDINTE_EORSTE_MASK)) |
| #define | Is_usb_resetting_endpoint(ep) (Tst_bits(AVR32_USBB_uerst, AVR32_USBB_UERST_EPRST0_MASK << (ep))) |
| tests if the selected endpoint is being reset More... | |
| #define | Is_usb_resume() (Tst_bits(AVR32_USBB_udint, AVR32_USBB_UDINT_EORSM_MASK)) |
| tests if resume occurs More... | |
| #define | Is_usb_resume_interrupt_enabled() (Tst_bits(AVR32_USBB_udinte, AVR32_USBB_UDINTE_EORSME_MASK)) |
| #define | Is_usb_role_exchange_interrupt() (Tst_bits(AVR32_USBB_usbsta, AVR32_USBB_USBSTA_ROLEEXI_MASK)) |
| tests if a role exchange occurs More... | |
| #define | Is_usb_role_exchange_interrupt_enabled() (Tst_bits(AVR32_USBB_usbcon, AVR32_USBB_USBCON_ROLEEXE_MASK)) |
| #define | Is_usb_setup_received() (Tst_bits(AVR32_USBB_uestax(EP_CONTROL), AVR32_USBB_UESTAX_RXSTPI_MASK)) |
| tests if SETUP received More... | |
| #define | Is_usb_setup_received_interrupt_enabled() (Tst_bits(AVR32_USBB_ueconx(EP_CONTROL), AVR32_USBB_UECONX_RXSTPE_MASK)) |
| tests if SETUP received interrupt is enabled More... | |
| #define | Is_usb_short_packet(ep) (Tst_bits(AVR32_USBB_uestax(ep), AVR32_USBB_UESTAX_SHORTPACKETI_MASK)) |
| tests if SHORT PACKET received More... | |
| #define | Is_usb_short_packet_interrupt_enabled(ep) (Tst_bits(AVR32_USBB_ueconx(ep), AVR32_USBB_UECONX_SHORTPACKETE_MASK)) |
| tests if SHORT PACKET received interrupt is enabled More... | |
| #define | Is_usb_sof() (Tst_bits(AVR32_USBB_udint, AVR32_USBB_UDINT_SOF_MASK)) |
| tests if Start-of-Frame occurs More... | |
| #define | Is_usb_sof_interrupt_enabled() (Tst_bits(AVR32_USBB_udinte, AVR32_USBB_UDINTE_SOFE_MASK)) |
| #define | Is_usb_srp_interrupt() (Tst_bits(AVR32_USBB_usbsta, AVR32_USBB_USBSTA_SRPI_MASK)) |
| tests if a SRP occurs More... | |
| #define | Is_usb_srp_interrupt_enabled() (Tst_bits(AVR32_USBB_usbcon, AVR32_USBB_USBCON_SRPE_MASK)) |
| #define | Is_usb_stall(ep) (Tst_bits(AVR32_USBB_uestax(ep), AVR32_USBB_UESTAX_STALLEDI_MASK)) |
| tests if STALL sent More... | |
| #define | Is_usb_stall_interrupt_enabled(ep) (Tst_bits(AVR32_USBB_ueconx(ep), AVR32_USBB_UECONX_STALLEDE_MASK)) |
| tests if STALL sent interrupt is enabled More... | |
| #define | Is_usb_suspend() (Tst_bits(AVR32_USBB_udint, AVR32_USBB_UDINT_SUSP_MASK)) |
| tests if Suspend state detected More... | |
| #define | Is_usb_suspend_interrupt_enabled() (Tst_bits(AVR32_USBB_udinte, AVR32_USBB_UDINTE_SUSPE_MASK)) |
| #define | Is_usb_suspend_time_out_interrupt() (Tst_bits(AVR32_USBB_usbsta, AVR32_USBB_USBSTA_STOI_MASK)) |
| tests if a suspend time out occurs More... | |
| #define | Is_usb_suspend_time_out_interrupt_enabled() (Tst_bits(AVR32_USBB_usbcon, AVR32_USBB_USBCON_STOE_MASK)) |
| #define | Is_usb_underflow(ep) (Tst_bits(AVR32_USBB_uestax(ep), AVR32_USBB_UESTAX_RXSTPI_MASK)) |
| tests if an underflow occurs More... | |
| #define | Is_usb_underflow_interrupt_enabled(ep) (Tst_bits(AVR32_USBB_ueconx(ep), AVR32_USBB_UECONX_RXSTPE_MASK)) |
| tests if underflow interrupt is enabled More... | |
| #define | Is_usb_vbof_active_high() (!Tst_bits(AVR32_USBB_usbcon, AVR32_USBB_USBCON_VBUSPO_MASK)) |
| Get USB_VBOF output pin polarity. More... | |
| #define | Is_usb_vbof_active_low() (!Is_usb_vbof_active_high()) |
| #define | Is_usb_vbof_pin_output() |
| Test if USB_VBOF is output onto its pin. More... | |
| #define | Is_usb_vbus_enabled() (Tst_bits(AVR32_USBB_usbsta, AVR32_USBB_USBSTA_VBUSRQ_MASK)) |
| tests if VBus activation has been requested More... | |
| #define | Is_usb_vbus_error_interrupt() (Tst_bits(AVR32_USBB_usbsta, AVR32_USBB_USBSTA_VBERRI_MASK)) |
| tests if a VBus error occurs More... | |
| #define | Is_usb_vbus_error_interrupt_enabled() (Tst_bits(AVR32_USBB_usbcon, AVR32_USBB_USBCON_VBERRE_MASK)) |
| #define | Is_usb_vbus_high() (Tst_bits(AVR32_USBB_usbsta, AVR32_USBB_USBSTA_VBUS_MASK)) |
| #define | Is_usb_vbus_hw_control_enabled() (!Tst_bits(AVR32_USBB_usbcon, AVR32_USBB_USBCON_VBUSHWC_MASK)) |
| #define | Is_usb_vbus_interrupt_enabled() (Tst_bits(AVR32_USBB_usbcon, AVR32_USBB_USBCON_VBUSTE_MASK)) |
| #define | Is_usb_vbus_low() (!Is_usb_vbus_high()) |
| #define | Is_usb_vbus_srp_method_selected() (Tst_bits(AVR32_USBB_usbcon, AVR32_USBB_USBCON_SRPSEL_MASK)) |
| #define | Is_usb_vbus_transition() (Tst_bits(AVR32_USBB_usbsta, AVR32_USBB_USBSTA_VBUSTI_MASK)) |
| #define | Is_usb_wake_up() (Tst_bits(AVR32_USBB_udint, AVR32_USBB_UDINT_WAKEUP_MASK)) |
| tests if wake-up occurs More... | |
| #define | Is_usb_wake_up_interrupt_enabled() (Tst_bits(AVR32_USBB_udinte, AVR32_USBB_UDINTE_WAKEUPE_MASK)) |
| #define | Is_usb_write_enabled(ep) (Tst_bits(AVR32_USBB_uestax(ep), AVR32_USBB_UESTAX_RWALL_MASK)) |
| tests if endpoint write allowed More... | |
| #define | MAX_PEP_NB AVR32_USBB_EPT_NUM |
| Maximal number of USBB pipes/endpoints. More... | |
| #define | P_0 0 |
| #define | P_1 1 |
| #define | P_2 2 |
| #define | P_3 3 |
| #define | P_4 4 |
| #define | P_5 5 |
| #define | P_6 6 |
| #define | P_CONTROL 0 |
| #define | PDTMOUTCNT_TIMER AVR32_USBB_USBCON_TIMPAGE_PD_TMOUT_CNT |
| #define | PDTMOUTCNT_TMOUT_105_MS AVR32_USBB_USBCON_TIMVALUE_PD_TMOUT_CNT_105_MS |
| #define | PDTMOUTCNT_TMOUT_118_MS AVR32_USBB_USBCON_TIMVALUE_PD_TMOUT_CNT_118_MS |
| #define | PDTMOUTCNT_TMOUT_131_MS AVR32_USBB_USBCON_TIMVALUE_PD_TMOUT_CNT_131_MS |
| #define | PDTMOUTCNT_TMOUT_93_MS AVR32_USBB_USBCON_TIMVALUE_PD_TMOUT_CNT_93_MS |
| #define | SINGLE_BANK AVR32_USBB_UECFGX_EPBK_SINGLE |
| #define | SRPDETTMOUT_TIMER AVR32_USBB_USBCON_TIMPAGE_SRP_DET_TMOUT |
| #define | SRPDETTMOUT_TMOUT_100_US AVR32_USBB_USBCON_TIMVALUE_SRP_DET_TMOUT_100_US |
| #define | SRPDETTMOUT_TMOUT_10_US AVR32_USBB_USBCON_TIMVALUE_SRP_DET_TMOUT_10_US |
| #define | SRPDETTMOUT_TMOUT_11_MS AVR32_USBB_USBCON_TIMVALUE_SRP_DET_TMOUT_11_MS |
| #define | SRPDETTMOUT_TMOUT_1_MS AVR32_USBB_USBCON_TIMVALUE_SRP_DET_TMOUT_1_MS |
| #define | SYNCHRONIZATION_TYPE_MASK 0x0c |
| #define | TOKEN_IN AVR32_USBB_UPCFGX_PTOKEN_IN |
| #define | TOKEN_OUT AVR32_USBB_UPCFGX_PTOKEN_OUT |
| #define | TOKEN_SETUP AVR32_USBB_UPCFGX_PTOKEN_SETUP |
| #define | TRANSFER_TYPE_MASK 0x03 |
| #define | TRIPLE_BANK AVR32_USBB_UECFGX_EPBK_TRIPLE |
| #define | TYPE_BULK AVR32_USBB_UECFGX_EPTYPE_BULK |
| #define | TYPE_CONTROL AVR32_USBB_UECFGX_EPTYPE_CONTROL |
| #define | TYPE_INTERRUPT AVR32_USBB_UECFGX_EPTYPE_INTERRUPT |
| #define | TYPE_ISOCHRONOUS AVR32_USBB_UECFGX_EPTYPE_ISOCHRONOUS |
| #define | USAGE_TYPE_MASK 0x30 |
| #define | Usb_ack_bconnection_error_interrupt() (AVR32_USBB_usbstaclr = AVR32_USBB_USBSTACLR_BCERRIC_MASK) |
| acks B-device connection error interrupt More... | |
| #define | Usb_ack_control_in_ready_send() (AVR32_USBB_uestaxclr(EP_CONTROL) = AVR32_USBB_UESTAXCLR_TXINIC_MASK) |
| acks IN ready on control endpoint and sends current bank More... | |
| #define | Usb_ack_control_out_received_free() (AVR32_USBB_uestaxclr(EP_CONTROL) = AVR32_USBB_UESTAXCLR_RXOUTIC_MASK) |
| acks OUT received on control endpoint and frees current bank More... | |
| #define | Usb_ack_crc_error(ep) (AVR32_USBB_uestaxclr(ep) = AVR32_USBB_UESTAXCLR_STALLEDIC_MASK) |
| acks CRC ERROR ISO OUT detected More... | |
| #define | Usb_ack_fifocon(ep) (AVR32_USBB_ueconxclr(ep) = AVR32_USBB_UECONXCLR_FIFOCONC_MASK) |
| clears FIFOCON bit More... | |
| #define | Usb_ack_hnp_error_interrupt() (AVR32_USBB_usbstaclr = AVR32_USBB_USBSTACLR_HNPERRIC_MASK) |
| acks HNP error interrupt More... | |
| #define | Usb_ack_id_transition() (AVR32_USBB_usbstaclr = AVR32_USBB_USBSTACLR_IDTIC_MASK) |
| #define | Usb_ack_in_ready(ep) (AVR32_USBB_uestaxclr(ep) = AVR32_USBB_UESTAXCLR_TXINIC_MASK) |
| acks IN ready More... | |
| #define | Usb_ack_in_ready_send(ep) (Usb_ack_in_ready(ep), Usb_send_in(ep)) |
| acks IN ready and sends current bank More... | |
| #define | Usb_ack_nak_in(ep) (AVR32_USBB_uestaxclr(ep) = AVR32_USBB_UESTAXCLR_NAKINIC_MASK) |
| acks NAK IN received More... | |
| #define | Usb_ack_nak_out(ep) (AVR32_USBB_uestaxclr(ep) = AVR32_USBB_UESTAXCLR_NAKOUTIC_MASK) |
| acks NAK OUT received More... | |
| #define | Usb_ack_out_received(ep) (AVR32_USBB_uestaxclr(ep) = AVR32_USBB_UESTAXCLR_RXOUTIC_MASK) |
| acks OUT received More... | |
| #define | Usb_ack_out_received_free(ep) (Usb_ack_out_received(ep), Usb_free_out(ep)) |
| acks OUT received and frees current bank More... | |
| #define | Usb_ack_overflow_interrupt(ep) (AVR32_USBB_uestaxclr(ep) = AVR32_USBB_UESTAXCLR_OVERFIC_MASK) |
| acks endpoint overflow interrupt More... | |
| #define | Usb_ack_remote_wake_up_start() (AVR32_USBB_udintclr = AVR32_USBB_UDINTCLR_UPRSMC_MASK) |
| acks remote wake-up More... | |
| #define | Usb_ack_reset() (AVR32_USBB_udintclr = AVR32_USBB_UDINTCLR_EORSTC_MASK) |
| acks USB reset More... | |
| #define | Usb_ack_resume() (AVR32_USBB_udintclr = AVR32_USBB_UDINTCLR_EORSMC_MASK) |
| acks resume More... | |
| #define | Usb_ack_role_exchange_interrupt() (AVR32_USBB_usbstaclr = AVR32_USBB_USBSTACLR_ROLEEXIC_MASK) |
| acks role exchange interrupt More... | |
| #define | Usb_ack_setup_received_free() (AVR32_USBB_uestaxclr(EP_CONTROL) = AVR32_USBB_UESTAXCLR_RXSTPIC_MASK) |
| acks SETUP received More... | |
| #define | Usb_ack_short_packet(ep) (AVR32_USBB_uestaxclr(ep) = AVR32_USBB_UESTAXCLR_SHORTPACKETIC_MASK) |
| acks SHORT PACKET received More... | |
| #define | Usb_ack_sof() (AVR32_USBB_udintclr = AVR32_USBB_UDINTCLR_SOFC_MASK) |
| acks Start-of-Frame More... | |
| #define | Usb_ack_srp_interrupt() (AVR32_USBB_usbstaclr = AVR32_USBB_USBSTACLR_SRPIC_MASK) |
| acks SRP interrupt More... | |
| #define | Usb_ack_stall(ep) (AVR32_USBB_uestaxclr(ep) = AVR32_USBB_UESTAXCLR_STALLEDIC_MASK) |
| acks STALL sent More... | |
| #define | Usb_ack_suspend() (AVR32_USBB_udintclr = AVR32_USBB_UDINTCLR_SUSPC_MASK) |
| acks Suspend More... | |
| #define | Usb_ack_suspend_time_out_interrupt() (AVR32_USBB_usbstaclr = AVR32_USBB_USBSTACLR_STOIC_MASK) |
| acks suspend time out interrupt More... | |
| #define | Usb_ack_underflow_interrupt(ep) (AVR32_USBB_uestaxclr(ep) = AVR32_USBB_UESTAXCLR_RXSTPIC_MASK) |
| acks endpoint underflow interrupt More... | |
| #define | Usb_ack_vbus_error_interrupt() (AVR32_USBB_usbstaclr = AVR32_USBB_USBSTACLR_VBERRIC_MASK) |
| acks VBus error interrupt More... | |
| #define | Usb_ack_vbus_transition() (AVR32_USBB_usbstaclr = AVR32_USBB_USBSTACLR_VBUSTIC_MASK) |
| #define | Usb_ack_wake_up() (AVR32_USBB_udintclr = AVR32_USBB_UDINTCLR_WAKEUPC_MASK) |
| acks wake-up More... | |
| #define | Usb_allocate_memory(ep) (Set_bits(AVR32_USBB_uecfgx(ep), AVR32_USBB_UECFGX_ALLOC_MASK)) |
| allocates the configuration x in DPRAM memory More... | |
| #define | Usb_attach() (Clr_bits(AVR32_USBB_udcon, AVR32_USBB_UDCON_DETACH_MASK)) |
| attaches to USB bus More... | |
| #define | Usb_byte_count(ep) (Rd_bitfield(AVR32_USBB_uestax(ep), AVR32_USBB_UESTAX_BYCT_MASK)) |
| returns the byte count More... | |
| #define | Usb_configure_address(addr) (Wr_bitfield(AVR32_USBB_udcon, AVR32_USBB_UDCON_UADD_MASK, addr)) |
| configures the USB device address More... | |
| #define | Usb_configure_endpoint(ep, type, dir, size, bank) |
| configures selected endpoint in one step More... | |
| #define | Usb_configure_endpoint_bank(ep, bank) (Wr_bitfield(AVR32_USBB_uecfgx(ep), AVR32_USBB_UECFGX_EPBK_MASK, bank)) |
| configures the selected endpoint number of banks More... | |
| #define | Usb_configure_endpoint_direction(ep, dir) (Wr_bitfield(AVR32_USBB_uecfgx(ep), AVR32_USBB_UECFGX_EPDIR_MASK, dir)) |
| configures the selected endpoint direction More... | |
| #define | Usb_configure_endpoint_size(ep, size) (Wr_bitfield(AVR32_USBB_uecfgx(ep), AVR32_USBB_UECFGX_EPSIZE_MASK, Usb_format_endpoint_size(size))) |
| configures the selected endpoint size More... | |
| #define | Usb_configure_endpoint_type(ep, type) (Wr_bitfield(AVR32_USBB_uecfgx(ep), AVR32_USBB_UECFGX_EPTYPE_MASK, type)) |
| configures the selected endpoint type More... | |
| #define | Usb_configure_timeout(timer, timeout) |
| Configure time-out of specified OTG timer. More... | |
| #define | Usb_control_direction() (Rd_bitfield(AVR32_USBB_uestax(EP_CONTROL), AVR32_USBB_UESTAX_CTRLDIR_MASK)) |
| returns the control direction More... | |
| #define | Usb_current_bank(ep) (Rd_bitfield(AVR32_USBB_uestax(ep), AVR32_USBB_UESTAX_CURRBK_MASK)) |
| returns the number of the current bank More... | |
| #define | Usb_data_toggle(ep) (Rd_bitfield(AVR32_USBB_uestax(ep), AVR32_USBB_UESTAX_DTSEQ_MASK)) |
| returns data toggle More... | |
| #define | Usb_detach() (Set_bits(AVR32_USBB_udcon, AVR32_USBB_UDCON_DETACH_MASK)) |
| detaches from USB bus More... | |
| #define | Usb_device_initiate_hnp() (Set_bits(AVR32_USBB_usbcon, AVR32_USBB_USBCON_HNPREQ_MASK)) |
| initiates a Host negotiation Protocol More... | |
| #define | Usb_device_initiate_srp() (Set_bits(AVR32_USBB_usbcon, AVR32_USBB_USBCON_SRPREQ_MASK)) |
| initiates a Session Request Protocol More... | |
| #define | Usb_disable() (Clr_bits(AVR32_USBB_usbcon, AVR32_USBB_USBCON_USBE_MASK)) |
| Disable USB macro. More... | |
| #define | Usb_disable_address() (Clr_bits(AVR32_USBB_udcon, AVR32_USBB_UDCON_ADDEN_MASK)) |
| disables USB device address More... | |
| #define | Usb_disable_bank_interrupt(ep) (AVR32_USBB_ueconxclr(ep) = AVR32_USBB_UECONXCLR_NBUSYBKEC_MASK) |
| disables all banks full (OUT) or free (IN) interrupt More... | |
| #define | Usb_disable_bconnection_error_interrupt() (Clr_bits(AVR32_USBB_usbcon, AVR32_USBB_USBCON_BCERRE_MASK)) |
| disables B-device connection error interrupt More... | |
| #define | Usb_disable_control_in_ready_interrupt() (AVR32_USBB_ueconxclr(EP_CONTROL) = AVR32_USBB_UECONXCLR_TXINEC_MASK) |
| disables IN ready on control endpoint interrupt More... | |
| #define | Usb_disable_control_out_received_interrupt() (AVR32_USBB_ueconxclr(EP_CONTROL) = AVR32_USBB_UECONXCLR_RXOUTEC_MASK) |
| disables OUT received on control endpoint interrupt More... | |
| #define | Usb_disable_crc_error_interrupt(ep) (AVR32_USBB_ueconxclr(ep) = AVR32_USBB_UECONXCLR_STALLEDEC_MASK) |
| disables CRC ERROR ISO OUT detected interrupt More... | |
| #define | Usb_disable_endpoint(ep) (Clr_bits(AVR32_USBB_uerst, AVR32_USBB_UERST_EPEN0_MASK << (ep))) |
| disables the selected endpoint More... | |
| #define | Usb_disable_endpoint_bank_autoswitch(ep) (Clr_bits(AVR32_USBB_uecfgx(ep), AVR32_USBB_UECFGX_AUTOSW_MASK)) |
| disables the bank autoswitch for the selected endpoint More... | |
| #define | Usb_disable_endpoint_dma_interrupt(epdma) (AVR32_USBB_udinteclr = AVR32_USBB_UDINTECLR_DMA1INTEC_MASK << ((epdma) - 1)) |
| disables the selected endpoint DMA channel interrupt More... | |
| #define | Usb_disable_endpoint_int_dis_hdma_req(ep) (AVR32_USBB_ueconxclr(ep) = AVR32_USBB_UECONXCLR_EPDISHDMAC_MASK) |
| disables the disabling of HDMA requests by endpoint interrupts More... | |
| #define | Usb_disable_endpoint_interrupt(ep) (AVR32_USBB_udinteclr = AVR32_USBB_UDINTECLR_EP0INTEC_MASK << (ep)) |
| disables the selected endpoint interrupt More... | |
| #define | Usb_disable_hnp_error_interrupt() (Clr_bits(AVR32_USBB_usbcon, AVR32_USBB_USBCON_HNPERRE_MASK)) |
| disables HNP error interrupt More... | |
| #define | Usb_disable_id_interrupt() (Clr_bits(AVR32_USBB_usbcon, AVR32_USBB_USBCON_IDTE_MASK)) |
| #define | Usb_disable_id_pin() (Clr_bits(AVR32_USBB_usbcon, AVR32_USBB_USBCON_UIDE_MASK)) |
| Disable external USB_ID pin (ignored by USB) More... | |
| #define | Usb_disable_in_ready_interrupt(ep) (AVR32_USBB_ueconxclr(ep) = AVR32_USBB_UECONXCLR_TXINEC_MASK) |
| disables IN ready interrupt More... | |
| #define | Usb_disable_nak_in_interrupt(ep) (AVR32_USBB_ueconxclr(ep) = AVR32_USBB_UECONXCLR_NAKINEC_MASK) |
| disables NAK IN interrupt More... | |
| #define | Usb_disable_nak_out_interrupt(ep) (AVR32_USBB_ueconxclr(ep) = AVR32_USBB_UECONXCLR_NAKOUTEC_MASK) |
| disables NAK OUT interrupt More... | |
| #define | Usb_disable_otg_pad() (Clr_bits(AVR32_USBB_usbcon, AVR32_USBB_USBCON_OTGPADE_MASK)) |
| Disable OTG pad. More... | |
| #define | Usb_disable_out_received_interrupt(ep) (AVR32_USBB_ueconxclr(ep) = AVR32_USBB_UECONXCLR_RXOUTEC_MASK) |
| disables OUT received interrupt More... | |
| #define | Usb_disable_overflow_interrupt(ep) (AVR32_USBB_ueconxclr(ep) = AVR32_USBB_UECONXCLR_OVERFEC_MASK) |
| disables overflow interrupt More... | |
| #define | Usb_disable_remote_wake_up_interrupt() (AVR32_USBB_udinteclr = AVR32_USBB_UDINTECLR_UPRSMEC_MASK) |
| disables remote wake-up interrupt More... | |
| #define | Usb_disable_reset_interrupt() (AVR32_USBB_udinteclr = AVR32_USBB_UDINTECLR_EORSTEC_MASK) |
| disables USB reset interrupt More... | |
| #define | Usb_disable_resume_interrupt() (AVR32_USBB_udinteclr = AVR32_USBB_UDINTECLR_EORSMEC_MASK) |
| disables resume interrupt More... | |
| #define | Usb_disable_role_exchange_interrupt() (Clr_bits(AVR32_USBB_usbcon, AVR32_USBB_USBCON_ROLEEXE_MASK)) |
| disables role exchange interrupt More... | |
| #define | Usb_disable_setup_received_interrupt() (AVR32_USBB_ueconxclr(EP_CONTROL) = AVR32_USBB_UECONXCLR_RXSTPEC_MASK) |
| disables SETUP received interrupt More... | |
| #define | Usb_disable_short_packet_interrupt(ep) (AVR32_USBB_ueconxclr(ep) = AVR32_USBB_UECONXCLR_SHORTPACKETEC_MASK) |
| disables SHORT PACKET received interrupt More... | |
| #define | Usb_disable_sof_interrupt() (AVR32_USBB_udinteclr = AVR32_USBB_UDINTECLR_SOFEC_MASK) |
| disables Start-of-Frame Interrupt More... | |
| #define | Usb_disable_srp_interrupt() (Clr_bits(AVR32_USBB_usbcon, AVR32_USBB_USBCON_SRPE_MASK)) |
| disables SRP interrupt More... | |
| #define | Usb_disable_stall_handshake(ep) (AVR32_USBB_ueconxclr(ep) = AVR32_USBB_UECONXCLR_STALLRQC_MASK) |
| disables the STALL handshake More... | |
| #define | Usb_disable_stall_interrupt(ep) (AVR32_USBB_ueconxclr(ep) = AVR32_USBB_UECONXCLR_STALLEDEC_MASK) |
| disables STALL sent interrupt More... | |
| #define | Usb_disable_suspend_interrupt() (AVR32_USBB_udinteclr = AVR32_USBB_UDINTECLR_SUSPEC_MASK) |
| disables suspend state interrupt More... | |
| #define | Usb_disable_suspend_time_out_interrupt() (Clr_bits(AVR32_USBB_usbcon, AVR32_USBB_USBCON_STOE_MASK)) |
| disables suspend time out interrupt More... | |
| #define | Usb_disable_underflow_interrupt(ep) (AVR32_USBB_ueconxclr(ep) = AVR32_USBB_UECONXCLR_RXSTPEC_MASK) |
| disables underflow interrupt More... | |
| #define | Usb_disable_vbus() (AVR32_USBB_usbstaclr = AVR32_USBB_USBSTACLR_VBUSRQC_MASK) |
| requests VBus deactivation More... | |
| #define | Usb_disable_vbus_error_interrupt() (Clr_bits(AVR32_USBB_usbcon, AVR32_USBB_USBCON_VBERRE_MASK)) |
| disables VBus error interrupt More... | |
| #define | Usb_disable_vbus_hw_control() (Set_bits(AVR32_USBB_usbcon, AVR32_USBB_USBCON_VBUSHWC_MASK)) |
| disables hardware control over the USB_VBOF output pin More... | |
| #define | Usb_disable_vbus_interrupt() (Clr_bits(AVR32_USBB_usbcon, AVR32_USBB_USBCON_VBUSTE_MASK)) |
| #define | Usb_disable_wake_up_interrupt() (AVR32_USBB_udinteclr = AVR32_USBB_UDINTECLR_WAKEUPEC_MASK) |
| disables wake-up interrupt More... | |
| #define | Usb_enable() (Set_bits(AVR32_USBB_usbcon, AVR32_USBB_USBCON_USBE_MASK)) |
| Enable USB macro. More... | |
| #define | Usb_enable_address() (Set_bits(AVR32_USBB_udcon, AVR32_USBB_UDCON_ADDEN_MASK)) |
| enables USB device address More... | |
| #define | Usb_enable_bank_interrupt(ep) (AVR32_USBB_ueconxset(ep) = AVR32_USBB_UECONXSET_NBUSYBKES_MASK) |
| enables all banks full (OUT) or free (IN) interrupt More... | |
| #define | Usb_enable_bconnection_error_interrupt() (Set_bits(AVR32_USBB_usbcon, AVR32_USBB_USBCON_BCERRE_MASK)) |
| enables B-device connection error interrupt More... | |
| #define | Usb_enable_control_in_ready_interrupt() (AVR32_USBB_ueconxset(EP_CONTROL) = AVR32_USBB_UECONXSET_TXINES_MASK) |
| enables IN ready on control endpoint interrupt More... | |
| #define | Usb_enable_control_out_received_interrupt() (AVR32_USBB_ueconxset(EP_CONTROL) = AVR32_USBB_UECONXSET_RXOUTES_MASK) |
| enables OUT received on control endpoint interrupt More... | |
| #define | Usb_enable_crc_error_interrupt(ep) (AVR32_USBB_ueconxset(ep) = AVR32_USBB_UECONXSET_STALLEDES_MASK) |
| enables CRC ERROR ISO OUT detected interrupt More... | |
| #define | Usb_enable_endpoint(ep) (Set_bits(AVR32_USBB_uerst, AVR32_USBB_UERST_EPEN0_MASK << (ep))) |
| enables the selected endpoint More... | |
| #define | Usb_enable_endpoint_bank_autoswitch(ep) (Set_bits(AVR32_USBB_uecfgx(ep), AVR32_USBB_UECFGX_AUTOSW_MASK)) |
| enables the bank autoswitch for the selected endpoint More... | |
| #define | Usb_enable_endpoint_dma_interrupt(epdma) (AVR32_USBB_udinteset = AVR32_USBB_UDINTESET_DMA1INTES_MASK << ((epdma) - 1)) |
| enables the selected endpoint DMA channel interrupt More... | |
| #define | Usb_enable_endpoint_int_dis_hdma_req(ep) (AVR32_USBB_ueconxset(ep) = AVR32_USBB_UECONXSET_EPDISHDMAS_MASK) |
| enables the disabling of HDMA requests by endpoint interrupts More... | |
| #define | Usb_enable_endpoint_interrupt(ep) (AVR32_USBB_udinteset = AVR32_USBB_UDINTESET_EP0INTES_MASK << (ep)) |
| enables the selected endpoint interrupt More... | |
| #define | Usb_enable_hnp_error_interrupt() (Set_bits(AVR32_USBB_usbcon, AVR32_USBB_USBCON_HNPERRE_MASK)) |
| enables HNP error interrupt More... | |
| #define | Usb_enable_id_interrupt() (Set_bits(AVR32_USBB_usbcon, AVR32_USBB_USBCON_IDTE_MASK)) |
| #define | Usb_enable_id_pin() (Set_bits(AVR32_USBB_usbcon, AVR32_USBB_USBCON_UIDE_MASK)) |
| Enable external USB_ID pin (listened to by USB) More... | |
| #define | Usb_enable_in_ready_interrupt(ep) (AVR32_USBB_ueconxset(ep) = AVR32_USBB_UECONXSET_TXINES_MASK) |
| enables IN ready interrupt More... | |
| #define | Usb_enable_nak_in_interrupt(ep) (AVR32_USBB_ueconxset(ep) = AVR32_USBB_UECONXSET_NAKINES_MASK) |
| enables NAK IN interrupt More... | |
| #define | Usb_enable_nak_out_interrupt(ep) (AVR32_USBB_ueconxset(ep) = AVR32_USBB_UECONXSET_NAKOUTES_MASK) |
| enables NAK OUT interrupt More... | |
| #define | Usb_enable_otg_pad() (Set_bits(AVR32_USBB_usbcon, AVR32_USBB_USBCON_OTGPADE_MASK)) |
| Enable OTG pad. More... | |
| #define | Usb_enable_out_received_interrupt(ep) (AVR32_USBB_ueconxset(ep) = AVR32_USBB_UECONXSET_RXOUTES_MASK) |
| enables OUT received interrupt More... | |
| #define | Usb_enable_overflow_interrupt(ep) (AVR32_USBB_ueconxset(ep) = AVR32_USBB_UECONXSET_OVERFES_MASK) |
| enables overflow interrupt More... | |
| #define | Usb_enable_remote_wake_up_interrupt() (AVR32_USBB_udinteset = AVR32_USBB_UDINTESET_UPRSMES_MASK) |
| enables remote wake-up interrupt More... | |
| #define | Usb_enable_reset_interrupt() (AVR32_USBB_udinteset = AVR32_USBB_UDINTESET_EORSTES_MASK) |
| enables USB reset interrupt More... | |
| #define | Usb_enable_resume_interrupt() (AVR32_USBB_udinteset = AVR32_USBB_UDINTESET_EORSMES_MASK) |
| enables resume interrupt More... | |
| #define | Usb_enable_role_exchange_interrupt() (Set_bits(AVR32_USBB_usbcon, AVR32_USBB_USBCON_ROLEEXE_MASK)) |
| enables role exchange interrupt More... | |
| #define | Usb_enable_setup_received_interrupt() (AVR32_USBB_ueconxset(EP_CONTROL) = AVR32_USBB_UECONXSET_RXSTPES_MASK) |
| enables SETUP received interrupt More... | |
| #define | Usb_enable_short_packet_interrupt(ep) (AVR32_USBB_ueconxset(ep) = AVR32_USBB_UECONXSET_SHORTPACKETES_MASK) |
| enables SHORT PACKET received interrupt More... | |
| #define | Usb_enable_sof_interrupt() (AVR32_USBB_udinteset = AVR32_USBB_UDINTESET_SOFES_MASK) |
| enables Start-of-Frame Interrupt More... | |
| #define | Usb_enable_srp_interrupt() (Set_bits(AVR32_USBB_usbcon, AVR32_USBB_USBCON_SRPE_MASK)) |
| enables SRP interrupt More... | |
| #define | Usb_enable_stall_handshake(ep) (AVR32_USBB_ueconxset(ep) = AVR32_USBB_UECONXSET_STALLRQS_MASK) |
| enables the STALL handshake More... | |
| #define | Usb_enable_stall_interrupt(ep) (AVR32_USBB_ueconxset(ep) = AVR32_USBB_UECONXSET_STALLEDES_MASK) |
| enables STALL sent interrupt More... | |
| #define | Usb_enable_suspend_interrupt() (AVR32_USBB_udinteset = AVR32_USBB_UDINTESET_SUSPES_MASK) |
| enables suspend state interrupt More... | |
| #define | Usb_enable_suspend_time_out_interrupt() (Set_bits(AVR32_USBB_usbcon, AVR32_USBB_USBCON_STOE_MASK)) |
| enables suspend time out interrupt More... | |
| #define | Usb_enable_underflow_interrupt(ep) (AVR32_USBB_ueconxset(ep) = AVR32_USBB_UECONXSET_RXSTPES_MASK) |
| enables underflow interrupt More... | |
| #define | Usb_enable_vbus() (AVR32_USBB_usbstaset = AVR32_USBB_USBSTASET_VBUSRQS_MASK) |
| requests VBus activation More... | |
| #define | Usb_enable_vbus_error_interrupt() (Set_bits(AVR32_USBB_usbcon, AVR32_USBB_USBCON_VBERRE_MASK)) |
| enables VBus error interrupt More... | |
| #define | Usb_enable_vbus_hw_control() (Clr_bits(AVR32_USBB_usbcon, AVR32_USBB_USBCON_VBUSHWC_MASK)) |
| enables hardware control over the USB_VBOF output pin More... | |
| #define | Usb_enable_vbus_interrupt() (Set_bits(AVR32_USBB_usbcon, AVR32_USBB_USBCON_VBUSTE_MASK)) |
| #define | Usb_enable_wake_up_interrupt() (AVR32_USBB_udinteset = AVR32_USBB_UDINTESET_WAKEUPES_MASK) |
| enables wake-up interrupt More... | |
| #define | Usb_force_bank_interrupt(ep) (AVR32_USBB_uestaxset(ep) = AVR32_USBB_UESTAXSET_NBUSYBKS_MASK) |
| forces all banks full (OUT) or free (IN) interrupt More... | |
| #define | Usb_force_device_mode() (Set_bits(AVR32_USBB_usbcon, AVR32_USBB_USBCON_UIMOD_MASK), Usb_disable_id_pin()) |
| Disable external USB_ID pin and force device mode. More... | |
| #define | Usb_force_full_speed_mode() do { } while (0) |
| #define | Usb_force_host_mode() (Clr_bits(AVR32_USBB_usbcon, AVR32_USBB_USBCON_UIMOD_MASK), Usb_disable_id_pin()) |
| Disable external USB_ID pin and force host mode. More... | |
| #define | Usb_force_low_speed_mode() (Set_bits(AVR32_USBB_udcon, AVR32_USBB_UDCON_LS_MASK)) |
| Force device low-speed mode. More... | |
| #define | Usb_format_endpoint_size(size) (32 - clz(((U32)min(max(size, 8), 1024) << 1) - 1) - 1 - 3) |
| Bounds given integer size to allowed range and rounds it up to the nearest available greater size, then applies register format of USBB controller for endpoint size bit-field. More... | |
| #define | Usb_frame_number() (Rd_bitfield(AVR32_USBB_udfnum, AVR32_USBB_UDFNUM_FNUM_MASK)) |
| returns the current frame number More... | |
| #define | Usb_free_out(ep) (Usb_ack_fifocon(ep)) |
| frees current bank for OUT endpoint More... | |
| #define | Usb_freeze_clock() (Set_bits(AVR32_USBB_usbcon, AVR32_USBB_USBCON_FRZCLK_MASK)) |
| Stop (freeze) internal USB clock. More... | |
| #define | Usb_get_configured_address() (Rd_bitfield(AVR32_USBB_udcon, AVR32_USBB_UDCON_UADD_MASK)) |
| gets the currently configured USB device address More... | |
| #define | Usb_get_dma_buffer_size() (Rd_bitfield(AVR32_USBB_ufeatures, AVR32_USBB_UFEATURES_DMA_BUFFER_SIZE_MASK)) |
| Get DMA buffer size. More... | |
| #define | Usb_get_dma_channel_nbr() (Rd_bitfield(AVR32_USBB_ufeatures, AVR32_USBB_UFEATURES_DMA_CHANNEL_NBR_MASK)) |
| Get number of hardware-implemented DMA channels. More... | |
| #define | Usb_get_dma_fifo_word_depth() (((Rd_bitfield(AVR32_USBB_ufeatures, AVR32_USBB_UFEATURES_DMA_FIFO_WORD_DEPTH_MASK) - 1) & ((1 << AVR32_USBB_UFEATURES_DMA_FIFO_WORD_DEPTH_SIZE) - 1)) + 1) |
| Get DMA FIFO depth in words. More... | |
| #define | Usb_get_dpram_size() (128 << Rd_bitfield(AVR32_USBB_ufeatures, AVR32_USBB_UFEATURES_FIFO_MAX_SIZE_MASK)) |
| Get DPRAM size (FIFO maximal size) in bytes. More... | |
| #define | Usb_get_endpoint_bank(ep) (Rd_bitfield(AVR32_USBB_uecfgx(ep), AVR32_USBB_UECFGX_EPBK_MASK)) |
| gets the configured selected endpoint number of banks More... | |
| #define | Usb_get_endpoint_direction(ep) (Rd_bitfield(AVR32_USBB_uecfgx(ep), AVR32_USBB_UECFGX_EPDIR_MASK)) |
| gets the configured selected endpoint direction More... | |
| #define | Usb_get_endpoint_fifo_access(ep, scale) (AVR32_USBB_FIFOX_DATA(ep, scale)) |
| Get 64-, 32-, 16- or 8-bit access to FIFO data register of selected endpoint. More... | |
| #define | Usb_get_endpoint_size(ep) (8 << Rd_bitfield(AVR32_USBB_uecfgx(ep), AVR32_USBB_UECFGX_EPSIZE_MASK)) |
| gets the configured selected endpoint size More... | |
| #define | Usb_get_endpoint_type(ep) (Rd_bitfield(AVR32_USBB_uecfgx(ep), AVR32_USBB_UECFGX_EPTYPE_MASK)) |
| gets the configured selected endpoint type More... | |
| #define | Usb_get_fsm_drd_state() (Rd_bitfield(AVR32_USBB_usbfsm, AVR32_USBB_USBFSM_DRDSTATE_MASK)) |
| Get the dual-role device state of the internal USB finite state machine of the USBB controller. More... | |
| #define | Usb_get_interrupt_endpoint_number() |
| returns the lowest endpoint number generating an endpoint interrupt or MAX_PEP_NB if none More... | |
| #define | Usb_get_ip_name(part) (AVR32_USBB_unamex(part)) |
| Get IP name part 1 or 2. More... | |
| #define | Usb_get_ip_paddress_size() (AVR32_USBB_uaddrsize) |
| Get size of USBB PB address space. More... | |
| #define | Usb_get_ip_version() (Rd_bitfield(AVR32_USBB_uvers, AVR32_USBB_UVERS_VERSION_NUM_MASK)) |
| Get IP version. More... | |
| #define | Usb_get_metal_fix_nbr() (Rd_bitfield(AVR32_USBB_uvers, AVR32_USBB_UVERS_METAL_FIX_NUM_MASK)) |
| Get number of metal fixes. More... | |
| #define | Usb_get_pipe_endpoint_max_nbr() (((Rd_bitfield(AVR32_USBB_ufeatures, AVR32_USBB_UFEATURES_EPT_NBR_MAX_MASK) - 1) & ((1 << AVR32_USBB_UFEATURES_EPT_NBR_MAX_SIZE) - 1)) + 1) |
| Get maximal number of pipes/endpoints (number of hardware-implemented pipes/endpoints) More... | |
| #define | Usb_get_timeout(timer) |
| Get configured time-out of specified OTG timer. More... | |
| #define | Usb_halt_endpoint(ep) (Usb_enable_stall_handshake(ep)) |
| Sends a STALL handshake for the next host request. More... | |
| #define | Usb_host_accept_hnp() (Set_bits(AVR32_USBB_usbcon, AVR32_USBB_USBCON_HNPREQ_MASK)) |
| accepts a Host negotiation Protocol More... | |
| #define | Usb_host_reject_hnp() (Clr_bits(AVR32_USBB_usbcon, AVR32_USBB_USBCON_HNPREQ_MASK)) |
| rejects a Host negotiation Protocol More... | |
| #define | USB_ID_FUNCTION ATPASTE2(USB_ID, _FUNCTION) |
| #define | USB_ID_PIN ATPASTE2(USB_ID, _PIN) |
| Check that multiplexed pin used for USB_ID is defined. More... | |
| #define | Usb_initiate_remote_wake_up() (Set_bits(AVR32_USBB_udcon, AVR32_USBB_UDCON_RMWKUP_MASK)) |
| initiates a remote wake-up More... | |
| #define | Usb_input_id_pin() |
| Input USB_ID from its pin. More... | |
| #define | Usb_kill_last_in_bank(ep) (AVR32_USBB_ueconxset(ep) = AVR32_USBB_UECONXSET_KILLBKS_MASK) |
| kills last bank More... | |
| #define | Usb_nb_busy_bank(ep) (Rd_bitfield(AVR32_USBB_uestax(ep), AVR32_USBB_UESTAX_NBUSYBK_MASK)) |
| returns the number of busy banks More... | |
| #define | Usb_output_vbof_pin() |
| Output USB_VBOF onto its pin. More... | |
| #define | Usb_raise_bconnection_error_interrupt() (AVR32_USBB_usbstaset = AVR32_USBB_USBSTASET_BCERRIS_MASK) |
| raises B-device connection error interrupt More... | |
| #define | Usb_raise_control_in_ready() (AVR32_USBB_uestaxset(EP_CONTROL) = AVR32_USBB_UESTAXSET_TXINIS_MASK) |
| raises IN ready on control endpoint More... | |
| #define | Usb_raise_control_out_received() (AVR32_USBB_uestaxset(EP_CONTROL) = AVR32_USBB_UESTAXSET_RXOUTIS_MASK) |
| raises OUT received on control endpoint More... | |
| #define | Usb_raise_crc_error(ep) (AVR32_USBB_uestaxset(ep) = AVR32_USBB_UESTAXSET_STALLEDIS_MASK) |
| raises CRC ERROR ISO OUT detected More... | |
| #define | Usb_raise_endpoint_dma_interrupt(epdma) (AVR32_USBB_udintset = AVR32_USBB_UDINTSET_DMA1INTS_MASK << ((epdma) - 1)) |
| raises the selected endpoint DMA channel interrupt More... | |
| #define | Usb_raise_hnp_error_interrupt() (AVR32_USBB_usbstaset = AVR32_USBB_USBSTASET_HNPERRIS_MASK) |
| raises HNP error interrupt More... | |
| #define | Usb_raise_id_transition() (AVR32_USBB_usbstaset = AVR32_USBB_USBSTASET_IDTIS_MASK) |
| #define | Usb_raise_in_ready(ep) (AVR32_USBB_uestaxset(ep) = AVR32_USBB_UESTAXSET_TXINIS_MASK) |
| raises IN ready More... | |
| #define | Usb_raise_nak_in(ep) (AVR32_USBB_uestaxset(ep) = AVR32_USBB_UESTAXSET_NAKINIS_MASK) |
| raises NAK IN received More... | |
| #define | Usb_raise_nak_out(ep) (AVR32_USBB_uestaxset(ep) = AVR32_USBB_UESTAXSET_NAKOUTIS_MASK) |
| raises NAK OUT received More... | |
| #define | Usb_raise_out_received(ep) (AVR32_USBB_uestaxset(ep) = AVR32_USBB_UESTAXSET_RXOUTIS_MASK) |
| raises OUT received More... | |
| #define | Usb_raise_overflow_interrupt(ep) (AVR32_USBB_uestaxset(ep) = AVR32_USBB_UESTAXSET_OVERFIS_MASK) |
| raises endpoint overflow interrupt More... | |
| #define | Usb_raise_remote_wake_up_start() (AVR32_USBB_udintset = AVR32_USBB_UDINTSET_UPRSMS_MASK) |
| raises remote wake-up More... | |
| #define | Usb_raise_reset() (AVR32_USBB_udintset = AVR32_USBB_UDINTSET_EORSTS_MASK) |
| raises USB reset More... | |
| #define | Usb_raise_resume() (AVR32_USBB_udintset = AVR32_USBB_UDINTSET_EORSMS_MASK) |
| raises resume More... | |
| #define | Usb_raise_role_exchange_interrupt() (AVR32_USBB_usbstaset = AVR32_USBB_USBSTASET_ROLEEXIS_MASK) |
| raises role exchange interrupt More... | |
| #define | Usb_raise_setup_received() (AVR32_USBB_uestaxset(EP_CONTROL) = AVR32_USBB_UESTAXSET_RXSTPIS_MASK) |
| raises SETUP received More... | |
| #define | Usb_raise_short_packet(ep) (AVR32_USBB_uestaxset(ep) = AVR32_USBB_UESTAXSET_SHORTPACKETIS_MASK) |
| raises SHORT PACKET received More... | |
| #define | Usb_raise_sof() (AVR32_USBB_udintset = AVR32_USBB_UDINTSET_SOFS_MASK) |
| raises Start-of-Frame More... | |
| #define | Usb_raise_srp_interrupt() (AVR32_USBB_usbstaset = AVR32_USBB_USBSTASET_SRPIS_MASK) |
| raises SRP interrupt More... | |
| #define | Usb_raise_stall(ep) (AVR32_USBB_uestaxset(ep) = AVR32_USBB_UESTAXSET_STALLEDIS_MASK) |
| raises STALL sent More... | |
| #define | Usb_raise_suspend() (AVR32_USBB_udintset = AVR32_USBB_UDINTSET_SUSPS_MASK) |
| raises Suspend More... | |
| #define | Usb_raise_suspend_time_out_interrupt() (AVR32_USBB_usbstaset = AVR32_USBB_USBSTASET_STOIS_MASK) |
| raises suspend time out interrupt More... | |
| #define | Usb_raise_underflow_interrupt(ep) (AVR32_USBB_uestaxset(ep) = AVR32_USBB_UESTAXSET_RXSTPIS_MASK) |
| raises endpoint underflow interrupt More... | |
| #define | Usb_raise_vbus_error_interrupt() (AVR32_USBB_usbstaset = AVR32_USBB_USBSTASET_VBERRIS_MASK) |
| raises VBus error interrupt More... | |
| #define | Usb_raise_vbus_transition() (AVR32_USBB_usbstaset = AVR32_USBB_USBSTASET_VBUSTIS_MASK) |
| #define | Usb_raise_wake_up() (AVR32_USBB_udintset = AVR32_USBB_UDINTSET_WAKEUPS_MASK) |
| raises wake-up More... | |
| #define | Usb_read_endpoint_data(ep, scale) |
| Read 64-, 32-, 16- or 8-bit data from FIFO data register of selected endpoint. More... | |
| #define | Usb_read_endpoint_indexed_data(ep, scale, index) (AVR32_USBB_FIFOX_DATA(ep, scale)[(index)]) |
| Read 64-, 32-, 16- or 8-bit indexed data from FIFO data register of selected endpoint. More... | |
| #define | Usb_reset_data_toggle(ep) (AVR32_USBB_ueconxset(ep) = AVR32_USBB_UECONXSET_RSTDTS_MASK) |
| resets the data toggle sequence More... | |
| #define | Usb_reset_endpoint(ep) |
| resets the selected endpoint More... | |
| #define | Usb_reset_endpoint_fifo_access(ep) (pep_fifo[(ep)].u64ptr = Usb_get_endpoint_fifo_access(ep, 64)) |
| Reset known position inside FIFO data register of selected endpoint. More... | |
| #define | Usb_select_data_srp_method() (Clr_bits(AVR32_USBB_usbcon, AVR32_USBB_USBCON_SRPSEL_MASK)) |
| selects data line as SRP method More... | |
| #define | Usb_select_vbus_srp_method() (Set_bits(AVR32_USBB_usbcon, AVR32_USBB_USBCON_SRPSEL_MASK)) |
| selects VBus as SRP method More... | |
| #define | Usb_send_in(ep) (Usb_ack_fifocon(ep)) |
| sends current bank for IN endpoint More... | |
| #define | Usb_set_vbof_active_high() (Clr_bits(AVR32_USBB_usbcon, AVR32_USBB_USBCON_VBUSPO_MASK)) |
| Set USB_VBOF output pin polarity. More... | |
| #define | Usb_set_vbof_active_low() (Set_bits(AVR32_USBB_usbcon, AVR32_USBB_USBCON_VBUSPO_MASK)) |
| #define | Usb_unallocate_memory(ep) (Clr_bits(AVR32_USBB_uecfgx(ep), AVR32_USBB_UECFGX_ALLOC_MASK)) |
| un-allocates the configuration x in DPRAM memory More... | |
| #define | Usb_unforce_bank_interrupt(ep) (AVR32_USBB_uestaxset(ep) = AVR32_USBB_UESTAXSET_NBUSYBKS_MASK) |
| unforces all banks full (OUT) or free (IN) interrupt More... | |
| #define | Usb_unfreeze_clock() (Clr_bits(AVR32_USBB_usbcon, AVR32_USBB_USBCON_FRZCLK_MASK)) |
| #define | Usb_use_dual_speed_mode() do { } while (0) |
| #define | Usb_use_full_speed_mode() (Clr_bits(AVR32_USBB_udcon, AVR32_USBB_UDCON_LS_MASK)) |
| Use device full speed mode (default) More... | |
| #define | USB_VBOF_FUNCTION ATPASTE2(USB_VBOF, _FUNCTION) |
| #define | USB_VBOF_PIN ATPASTE2(USB_VBOF, _PIN) |
| Check that multiplexed pin used for USB_VBOF is defined. More... | |
| #define | Usb_write_endpoint_data(ep, scale, data) |
| Write 64-, 32-, 16- or 8-bit data to FIFO data register of selected endpoint. More... | |
| #define | Usb_write_endpoint_indexed_data(ep, scale, index, data) (AVR32_USBB_FIFOX_DATA(ep, scale)[(index)] = (data)) |
| Write 64-, 32-, 16- or 8-bit indexed data to FIFO data register of selected endpoint. More... | |
| #define | VBBUSPULSING_TIMER AVR32_USBB_USBCON_TIMPAGE_VB_BUS_PULSING |
| #define | VBBUSPULSING_TMOUT_15_MS AVR32_USBB_USBCON_TIMVALUE_VB_BUS_PULSING_15_MS |
| #define | VBBUSPULSING_TMOUT_23_MS AVR32_USBB_USBCON_TIMVALUE_VB_BUS_PULSING_23_MS |
| #define | VBBUSPULSING_TMOUT_31_MS AVR32_USBB_USBCON_TIMVALUE_VB_BUS_PULSING_31_MS |
| #define | VBBUSPULSING_TMOUT_40_MS AVR32_USBB_USBCON_TIMVALUE_VB_BUS_PULSING_40_MS |
| #define | Pep_fifo_access_64_post_inc() |
| Post-increment operations associated with 64-, 32-, 16- and 8-bit accesses to the FIFO data registers of pipes/endpoints. More... | |
| #define | Pep_fifo_access_32_post_inc() |
| #define | Pep_fifo_access_16_post_inc() ++ |
| #define | Pep_fifo_access_8_post_inc() ++ |
Functions | |
| void | host_disable_all_pipes (void) |
------------—— HOST ---------------------------——More... | |
| U32 | host_read_p_rxpacket (U8, void *, U32, void **) |
| host_read_p_rxpacket More... | |
| U32 | host_set_p_txpacket (U8, U8, U32) |
| host_set_p_txpacket More... | |
| U32 | host_write_p_txpacket (U8, const void *, U32, const void **) |
| host_write_p_txpacket More... | |
| Status_bool_t | usb_init_device (void) |
------------—— DEVICE -------------------------——More... | |
| U32 | usb_read_ep_rxpacket (U8, void *, U32, void **) |
| usb_read_ep_rxpacket More... | |
| U32 | usb_set_ep_txpacket (U8, U8, U32) |
| usb_set_ep_txpacket More... | |
| U32 | usb_write_ep_txpacket (U8, const void *, U32, const void **) |
| usb_write_ep_txpacket More... | |
Variables | |
| UnionVPtr | pep_fifo [MAX_PEP_NB] |
| Pointers to the FIFO data registers of pipes/endpoints Use aggregated pointers to have several alignments available for a same address. More... | |
| void host_disable_all_pipes | ( | void | ) |
host_disable_all_pipes
This function disables all pipes for the host controller. Useful to execute upon disconnection.
References cpu_irq_disable, cpu_irq_enable, cpu_irq_is_enabled, Host_disable_pipe, Host_disable_pipe_interrupt, Host_reset_pipe, Host_unallocate_memory, Is_host_pipe_enabled, and MAX_PEP_NB.
Referenced by usb_general_interrupt(), and usb_host_task().
host_read_p_rxpacket
This function reads the selected pipe FIFO to the buffer pointed to by rxbuf, using as few accesses as possible.
| p | Number of the addressed pipe |
| rxbuf | Address of buffer to write |
| data_length | Number of bytes to read |
| prxbuf | NULL or pointer to the buffer address to update |
References Align_down, Get_align, Host_byte_count, min, Test_align, UnionPtr::u16ptr, UnionCPtr::u16ptr, UnionCVPtr::u16ptr, UnionPtr::u32ptr, UnionCPtr::u32ptr, UnionCVPtr::u32ptr, UnionPtr::u64ptr, UnionCPtr::u64ptr, UnionCVPtr::u64ptr, UnionPtr::u8ptr, UnionVPtr::u8ptr, UnionCPtr::u8ptr, and UnionCVPtr::u8ptr.
Referenced by host_get_data(), and host_transfer_control().
host_set_p_txpacket
This function fills the selected pipe FIFO with a constant byte, using as few accesses as possible.
| p | Number of the addressed pipe |
| txbyte | Byte to fill the pipe with |
| data_length | Number of bytes to write |
References Align_down, Host_byte_count, Host_get_pipe_size, min, Test_align, Union64::u16, UnionVPtr::u16ptr, UnionCVPtr::u16ptr, Union64::u32, UnionVPtr::u32ptr, UnionCVPtr::u32ptr, Union64::u64, UnionVPtr::u64ptr, UnionCVPtr::u64ptr, u8, Union64::u8, UnionVPtr::u8ptr, and UnionCVPtr::u8ptr.
host_write_p_txpacket
This function writes the buffer pointed to by txbuf to the selected pipe FIFO, using as few accesses as possible.
| p | Number of the addressed pipe |
| txbuf | Address of buffer to read |
| data_length | Number of bytes to write |
| ptxbuf | NULL or pointer to the buffer address to update |
References Align_down, Get_align, Host_byte_count, Host_get_pipe_size, min, Test_align, UnionVPtr::u16ptr, UnionCPtr::u16ptr, UnionVPtr::u32ptr, UnionCPtr::u32ptr, UnionVPtr::u64ptr, UnionCPtr::u64ptr, UnionVPtr::u8ptr, and UnionCPtr::u8ptr.
Referenced by host_send_data(), and host_transfer_control().
| Status_bool_t usb_init_device | ( | void | ) |
usb_init_device
This function initializes the USB device controller and configures the Default Control Endpoint.
References DIRECTION_OUT, EP_CONTROL, EP_CONTROL_LENGTH, Is_usb_endpoint_enabled, Is_usb_id_device, SINGLE_BANK, TYPE_CONTROL, and Usb_configure_endpoint.
Referenced by usb_general_interrupt(), and usb_start_device().
usb_read_ep_rxpacket
This function reads the selected endpoint FIFO to the buffer pointed to by rxbuf, using as few accesses as possible.
| ep | Number of the addressed endpoint |
| rxbuf | Address of buffer to write |
| data_length | Number of bytes to read |
| prxbuf | NULL or pointer to the buffer address to update |
References Align_down, Get_align, min, Test_align, UnionPtr::u16ptr, UnionCVPtr::u16ptr, StructCPtr::u16ptr, UnionPtr::u32ptr, UnionCVPtr::u32ptr, StructCPtr::u32ptr, UnionPtr::u64ptr, UnionCVPtr::u64ptr, StructCPtr::u64ptr, UnionPtr::u8ptr, UnionVPtr::u8ptr, UnionCVPtr::u8ptr, StructCPtr::u8ptr, and Usb_byte_count.
usb_set_ep_txpacket
This function fills the selected endpoint FIFO with a constant byte, using as few accesses as possible.
| ep | Number of the addressed endpoint |
| txbyte | Byte to fill the endpoint with |
| data_length | Number of bytes to write |
References Align_down, min, Test_align, Union64::u16, UnionVPtr::u16ptr, UnionCVPtr::u16ptr, Union64::u32, UnionVPtr::u32ptr, UnionCVPtr::u32ptr, Union64::u64, UnionVPtr::u64ptr, UnionCVPtr::u64ptr, u8, Union64::u8, UnionVPtr::u8ptr, UnionCVPtr::u8ptr, Usb_byte_count, and Usb_get_endpoint_size.
usb_write_ep_txpacket
This function writes the buffer pointed to by txbuf to the selected endpoint FIFO, using as few accesses as possible.
| ep | Number of the addressed endpoint |
| txbuf | Address of buffer to read |
| data_length | Number of bytes to write |
| ptxbuf | NULL or pointer to the buffer address to update |
References Align_down, Get_align, min, Test_align, UnionVPtr::u16ptr, UnionCPtr::u16ptr, UnionVPtr::u32ptr, UnionCPtr::u32ptr, UnionVPtr::u64ptr, UnionCPtr::u64ptr, UnionVPtr::u8ptr, UnionCPtr::u8ptr, Usb_byte_count, and Usb_get_endpoint_size.
Referenced by usb_get_descriptor(), and usb_set_feature().
| UnionVPtr pep_fifo[MAX_PEP_NB] |
Pointers to the FIFO data registers of pipes/endpoints Use aggregated pointers to have several alignments available for a same address.
1.8.5