- p -

• P0SEG : nlao_io.h
• P1SEG : nlao_io.h
• P1SEGADDR : nlao_io.h
• P2SEG : nlao_io.h
• P2SEGADDR : nlao_io.h
• P3SEG : nlao_io.h
• P3SEGADDR : nlao_io.h
• P4SEG : nlao_io.h
• P4SEGADDR : nlao_io.h
• P_0 : usb_drv.h
• P_1 : usb_drv.h
• P_2 : usb_drv.h
• P_3 : usb_drv.h
• P_4 : usb_drv.h
• P_5 : usb_drv.h
• P_6 : usb_drv.h
• P_CONTROL : usb_drv.h
• PASS : compiler.h
• pcl_disable_module : power_clocks_lib.h
• pcl_enable_module : power_clocks_lib.h
• pcl_freq_param_t : power_clocks_lib.h
• PCL_NOT_SUPPORTED : power_clocks_lib.h
• PDTMOUTCNT_TIMER : usb_drv.h
• PDTMOUTCNT_TMOUT_105_MS : usb_drv.h
• PDTMOUTCNT_TMOUT_118_MS : usb_drv.h
• PDTMOUTCNT_TMOUT_131_MS : usb_drv.h
• PDTMOUTCNT_TMOUT_93_MS : usb_drv.h
• Pep_fifo_access_16_post_inc : usb_drv.h
• Pep_fifo_access_32_post_inc : usb_drv.h
• Pep_fifo_access_64_post_inc : usb_drv.h
• Pep_fifo_access_8_post_inc : usb_drv.h
• PGM_READ_BLOCK : compiler.h
• PGM_READ_BYTE : compiler.h
• PGM_READ_WORD : compiler.h
• physaddr : nlao_io.h
• PHYSADDR : nlao_io.h
• PIPE_CRC16 : usb_host_task.h
• PIPE_DATA_PID : usb_host_task.h
• PIPE_DATA_TOGGLE : usb_host_task.h
• PIPE_DELAY_TIMEOUT : usb_host_task.h
• PIPE_GOOD : usb_host_task.h
• PIPE_NAK_TIMEOUT : usb_host_task.h
• PIPE_PID : usb_host_task.h
• PIPE_STALL : usb_host_task.h
• PIPE_TIMEOUT : usb_host_task.h
• PM_FREQ_STATUS_FAIL : pm.h
• PM_FREQ_STATUS_OK : pm.h
• PM_MAX_MUL : pm_conf_clocks.c
• POWERED : usb_standard_request.h
• PROD_INDEX : usb_descriptors.h
• PRODUCT_ID : usb_descriptors.h
• PROGRAM_START_ADDRESS : trampoline_uc3.h
• PROGRAM_START_OFFSET : trampoline_uc3.h
• PROTOCOL_IAD : usb_ids.h
• PXSEG : nlao_io.h