Memory access control configuration file.
Copyright (c) 2013-2018 Microchip Technology Inc. and its subsidiaries.
Macros | |
Activation of Logical Unit Numbers | |
#define | LUN_0 ENABLE |
On-Chip Virtual Memory. More... | |
#define | LUN_1 DISABLE |
AT45DBX Data Flash. More... | |
#define | LUN_2 DISABLE |
SD/MMC Card over HSMCI Slot 0. More... | |
#define | LUN_3 DISABLE |
On-Board Nand Flash. More... | |
#define | LUN_4 DISABLE |
Spare. More... | |
#define | LUN_5 DISABLE |
Spare. More... | |
#define | LUN_6 DISABLE |
Spare. More... | |
#define | LUN_7 DISABLE |
Spare. More... | |
#define | LUN_USB DISABLE |
Host Mass-Storage Memory. More... | |
LUN 0 Definitions | |
#define | VIRTUAL_MEM LUN_0 |
#define | LUN_ID_VIRTUAL_MEM LUN_ID_0 |
#define | LUN_0_INCLUDE "virtual_mem.h" |
#define | Lun_0_test_unit_ready virtual_test_unit_ready |
#define | Lun_0_read_capacity virtual_read_capacity |
#define | Lun_0_unload virtual_unload |
#define | Lun_0_wr_protect virtual_wr_protect |
#define | Lun_0_removal virtual_removal |
#define | Lun_0_usb_read_10 virtual_usb_read_10 |
#define | Lun_0_usb_write_10 virtual_usb_write_10 |
#define | Lun_0_mem_2_ram virtual_mem_2_ram |
#define | Lun_0_ram_2_mem virtual_ram_2_mem |
#define | LUN_0_NAME "\"On-Chip Virtual Memory\"" |
LUN 1 Definitions | |
#define | AT45DBX_MEM LUN_1 |
#define | LUN_ID_AT45DBX_MEM LUN_ID_1 |
#define | LUN_1_INCLUDE "at45dbx_mem.h" |
#define | Lun_1_test_unit_ready at45dbx_test_unit_ready |
#define | Lun_1_read_capacity at45dbx_read_capacity |
#define | Lun_1_unload NULL /* Can not be unloaded */ |
#define | Lun_1_wr_protect at45dbx_wr_protect |
#define | Lun_1_removal at45dbx_removal |
#define | Lun_1_usb_read_10 at45dbx_usb_read_10 |
#define | Lun_1_usb_write_10 at45dbx_usb_write_10 |
#define | Lun_1_mem_2_ram at45dbx_df_2_ram |
#define | Lun_1_ram_2_mem at45dbx_ram_2_df |
#define | LUN_1_NAME "\"AT45DBX Data Flash\"" |
LUN 2 Definitions | |
#define | SD_MMC_0_MEM LUN_2 |
#define | LUN_ID_SD_MMC_0_MEM LUN_ID_2 |
#define | LUN_2_INCLUDE "sd_mmc_mem.h" |
#define | Lun_2_test_unit_ready sd_mmc_test_unit_ready_0 |
#define | Lun_2_read_capacity sd_mmc_read_capacity_0 |
#define | Lun_2_unload sd_mmc_unload_0 |
#define | Lun_2_wr_protect sd_mmc_wr_protect_0 |
#define | Lun_2_removal sd_mmc_removal_0 |
#define | Lun_2_usb_read_10 sd_mmc_usb_read_10_0 |
#define | Lun_2_usb_write_10 sd_mmc_usb_write_10_0 |
#define | Lun_2_mem_2_ram sd_mmc_mem_2_ram_0 |
#define | Lun_2_ram_2_mem sd_mmc_ram_2_mem_0 |
#define | LUN_2_NAME "\"SD/MMC Card Slot 0\"" |
LUN 3 Definitions | |
#define | NAND_FLASH_MEM LUN_3 |
#define | LUN_ID_NAND_FLASH_MEM LUN_ID_3 |
#define | LUN_3_INCLUDE "nand_flash_mem.h" |
#define | Lun_3_test_unit_ready nand_flash_test_unit_ready |
#define | Lun_3_read_capacity nand_flash_read_capacity |
#define | Lun_3_unload NULL |
#define | Lun_3_wr_protect nand_flash_wr_protect |
#define | Lun_3_removal nand_flash_removal |
#define | Lun_3_usb_read_10 nand_flash_usb_read_10 |
#define | Lun_3_usb_write_10 nand_flash_usb_write_10 |
#define | Lun_3_mem_2_ram nand_flash_mem_2_ram |
#define | Lun_3_ram_2_mem nand_flash_ram_2_mem |
#define | LUN_3_NAME "\"nand_flash on EBI\"" |
USB LUNs Definitions | |
#define | MEM_USB LUN_USB |
#define | LUN_ID_MEM_USB LUN_ID_USB |
#define | LUN_USB_INCLUDE "uhi_msc_mem.h" |
#define | Lun_usb_get_lun() uhi_msc_mem_get_lun() |
#define | Lun_usb_test_unit_ready(lun) uhi_msc_mem_test_unit_ready(lun) |
#define | Lun_usb_read_capacity(lun, nb_sect) uhi_msc_mem_read_capacity(lun, nb_sect) |
#define | Lun_usb_read_sector_size(lun) uhi_msc_mem_read_sector_size(lun) |
#define | Lun_usb_wr_protect(lun) uhi_msc_mem_wr_protect(lun) |
#define | Lun_usb_removal() uhi_msc_mem_removal() |
#define | Lun_usb_mem_2_ram(addr, ram) uhi_msc_mem_read_10_ram(addr, ram) |
#define | Lun_usb_ram_2_mem(addr, ram) uhi_msc_mem_write_10_ram(addr, ram) |
#define | LUN_USB_NAME "\"Host Mass-Storage Memory\"" |
Actions Associated with Memory Accesses | |
Write here the action to associate with each memory access.
| |
#define | memory_start_read_action(nb_sectors) ui_start_read() |
#define | memory_stop_read_action() ui_stop_read() |
#define | memory_start_write_action(nb_sectors) ui_start_write() |
#define | memory_stop_write_action() ui_stop_write() |
Activation of Interface Features | |
#define | ACCESS_USB true |
MEM <-> USB interface. More... | |
#define | ACCESS_MEM_TO_RAM false |
MEM <-> RAM interface. More... | |
#define | ACCESS_STREAM false |
Streaming MEM <-> MEM interface. More... | |
#define | ACCESS_STREAM_RECORD false |
Streaming MEM <-> MEM interface in record mode. More... | |
#define | ACCESS_MEM_TO_MEM false |
MEM <-> MEM interface. More... | |
#define | ACCESS_CODEC false |
Codec interface. More... | |
Specific Options for Access Control | |
#define | GLOBAL_WR_PROTECT false |
Management of a global write protection. More... | |
#define ACCESS_CODEC false |
Codec interface.
#define ACCESS_MEM_TO_MEM false |
MEM <-> MEM interface.
#define ACCESS_MEM_TO_RAM false |
MEM <-> RAM interface.
#define ACCESS_STREAM false |
Streaming MEM <-> MEM interface.
#define ACCESS_STREAM_RECORD false |
Streaming MEM <-> MEM interface in record mode.
#define ACCESS_USB true |
MEM <-> USB interface.
#define AT45DBX_MEM LUN_1 |
#define GLOBAL_WR_PROTECT false |
Management of a global write protection.
#define LUN_0 ENABLE |
On-Chip Virtual Memory.
#define LUN_0_INCLUDE "virtual_mem.h" |
#define Lun_0_mem_2_ram virtual_mem_2_ram |
#define LUN_0_NAME "\"On-Chip Virtual Memory\"" |
#define Lun_0_ram_2_mem virtual_ram_2_mem |
#define Lun_0_read_capacity virtual_read_capacity |
#define Lun_0_removal virtual_removal |
#define Lun_0_test_unit_ready virtual_test_unit_ready |
#define Lun_0_unload virtual_unload |
#define Lun_0_usb_read_10 virtual_usb_read_10 |
#define Lun_0_usb_write_10 virtual_usb_write_10 |
#define Lun_0_wr_protect virtual_wr_protect |
#define LUN_1 DISABLE |
AT45DBX Data Flash.
#define LUN_1_INCLUDE "at45dbx_mem.h" |
#define Lun_1_mem_2_ram at45dbx_df_2_ram |
#define LUN_1_NAME "\"AT45DBX Data Flash\"" |
#define Lun_1_ram_2_mem at45dbx_ram_2_df |
#define Lun_1_read_capacity at45dbx_read_capacity |
#define Lun_1_removal at45dbx_removal |
#define Lun_1_test_unit_ready at45dbx_test_unit_ready |
#define Lun_1_unload NULL /* Can not be unloaded */ |
#define Lun_1_usb_read_10 at45dbx_usb_read_10 |
#define Lun_1_usb_write_10 at45dbx_usb_write_10 |
#define Lun_1_wr_protect at45dbx_wr_protect |
#define LUN_2 DISABLE |
SD/MMC Card over HSMCI Slot 0.
#define LUN_2_INCLUDE "sd_mmc_mem.h" |
#define Lun_2_mem_2_ram sd_mmc_mem_2_ram_0 |
#define LUN_2_NAME "\"SD/MMC Card Slot 0\"" |
#define Lun_2_ram_2_mem sd_mmc_ram_2_mem_0 |
#define Lun_2_read_capacity sd_mmc_read_capacity_0 |
#define Lun_2_removal sd_mmc_removal_0 |
#define Lun_2_test_unit_ready sd_mmc_test_unit_ready_0 |
#define Lun_2_unload sd_mmc_unload_0 |
#define Lun_2_usb_read_10 sd_mmc_usb_read_10_0 |
#define Lun_2_usb_write_10 sd_mmc_usb_write_10_0 |
#define Lun_2_wr_protect sd_mmc_wr_protect_0 |
#define LUN_3 DISABLE |
On-Board Nand Flash.
#define LUN_3_INCLUDE "nand_flash_mem.h" |
#define Lun_3_mem_2_ram nand_flash_mem_2_ram |
#define LUN_3_NAME "\"nand_flash on EBI\"" |
#define Lun_3_ram_2_mem nand_flash_ram_2_mem |
#define Lun_3_read_capacity nand_flash_read_capacity |
#define Lun_3_removal nand_flash_removal |
#define Lun_3_test_unit_ready nand_flash_test_unit_ready |
#define Lun_3_unload NULL |
#define Lun_3_usb_read_10 nand_flash_usb_read_10 |
#define Lun_3_usb_write_10 nand_flash_usb_write_10 |
#define Lun_3_wr_protect nand_flash_wr_protect |
#define LUN_4 DISABLE |
Spare.
#define LUN_5 DISABLE |
Spare.
#define LUN_6 DISABLE |
Spare.
#define LUN_7 DISABLE |
Spare.
#define LUN_ID_AT45DBX_MEM LUN_ID_1 |
#define LUN_ID_MEM_USB LUN_ID_USB |
#define LUN_ID_NAND_FLASH_MEM LUN_ID_3 |
#define LUN_ID_SD_MMC_0_MEM LUN_ID_2 |
#define LUN_ID_VIRTUAL_MEM LUN_ID_0 |
#define LUN_USB DISABLE |
Host Mass-Storage Memory.
Referenced by mem_name(), mem_sector_size(), and mem_unload().
#define Lun_usb_get_lun | ( | ) | uhi_msc_mem_get_lun() |
Referenced by get_nb_lun().
#define LUN_USB_INCLUDE "uhi_msc_mem.h" |
#define Lun_usb_mem_2_ram | ( | addr, | |
ram | |||
) | uhi_msc_mem_read_10_ram(addr, ram) |
#define LUN_USB_NAME "\"Host Mass-Storage Memory\"" |
Referenced by mem_name().
#define Lun_usb_ram_2_mem | ( | addr, | |
ram | |||
) | uhi_msc_mem_write_10_ram(addr, ram) |
#define Lun_usb_read_capacity | ( | lun, | |
nb_sect | |||
) | uhi_msc_mem_read_capacity(lun, nb_sect) |
Referenced by mem_read_capacity().
#define Lun_usb_read_sector_size | ( | lun | ) | uhi_msc_mem_read_sector_size(lun) |
Referenced by mem_sector_size().
#define Lun_usb_removal | ( | ) | uhi_msc_mem_removal() |
Referenced by mem_removal().
#define Lun_usb_test_unit_ready | ( | lun | ) | uhi_msc_mem_test_unit_ready(lun) |
Referenced by mem_test_unit_ready().
#define Lun_usb_wr_protect | ( | lun | ) | uhi_msc_mem_wr_protect(lun) |
Referenced by mem_wr_protect().
#define MEM_USB LUN_USB |
#define memory_start_read_action | ( | nb_sectors | ) | ui_start_read() |
Referenced by memory_2_usb().
#define memory_start_write_action | ( | nb_sectors | ) | ui_start_write() |
Referenced by usb_2_memory().
#define memory_stop_read_action | ( | ) | ui_stop_read() |
Referenced by memory_2_usb().
#define memory_stop_write_action | ( | ) | ui_stop_write() |
Referenced by usb_2_memory().
#define NAND_FLASH_MEM LUN_3 |
#define SD_MMC_0_MEM LUN_2 |
#define VIRTUAL_MEM LUN_0 |