Data Structures
struct	ed_scan_result_t
	ED scan result structure to hold the channel and its ED value. More...

struct	trx_config_params_t
	Structure to hold all configurable parameter values. More...

Macros
#define	CHANNEL (0)

#define	CHANNEL_PAGE (1)

#define	LED_TOGGLE_COUNT_FOR_PER (50)

#define	MAX_ED_REG_VAL (0X53)

#define	MAX_ED_VAL 4

#define	MAX_TX_PWR_REG_VAL (0x1f)

#define	MIN_ED_REG_VAL (0X00)

#define	MIN_ED_VAL -127

#define	TX_POWER_DBM (2)

Packet Error rate Measurement Generic Macros
#define	SET_PARAM (0x01)

#define	RESULT_REQ (0x02)

#define	RESULT_RSP (0x03)

#define	IDENTIFY_NODE (0x07)

#define	PER_TEST_PKT (0x0B)

#define	PEER_INFO_REQ (0x0C)

#define	PEER_INFO_RSP (0x0D)

#define	DISCONNECT_NODE (0x0E)

#define	SET_DEFAULT_REQ (0x0F)

#define	PER_TEST_START_PKT (0x10)

#define	RANGE_TEST_START_PKT (0x11)

#define	RANGE_TEST_PKT (0x12)

#define	RANGE_TEST_RSP (0x13)

#define	RANGE_TEST_STOP_PKT (0x14)

#define	RANGE_TEST_MARKER_CMD (0x15)

#define	RANGE_TEST_MARKER_RSP (0x16)

#define	SET_SUN_PAGE (0X17)

#define	RANGE_TEST_PAYLOAD_LENGTH (0X08)

#define	LED_BLINK_RATE_IN_MICRO_SEC (50000)

Functions
void	app_reset (trx_id_t trx)

void	marker_rsp_timer_handler_cb (void *parameter)
	Timer Callback function if marker command is received on air This is used to blink the LED and thus identify that the marker frame is received. More...

void	marker_tx_timer_handler_cb (void *parameter)
	Timer Callback function if marker response command is transmitted on air This is used to blink the LED and thus identify that the transmission is done. More...

void	per_mode_initiator_ed_end_cb (trx_id_t trx, uint8_t energy_level)
	User call back function after ED Scan completion. More...

void	per_mode_initiator_init (trx_id_t trx, void *parameter)
	Initialize the application in PER Measurement mode as Initiator. More...

void	per_mode_initiator_rx_cb (trx_id_t trx, frame_info_t *frame)
	Callback that is called if data has been received by trx in the PER_FOUND_PER_INITIATOR state. More...

void	per_mode_initiator_task (trx_id_t trx)
	Application task for PER Measurement mode as initiator. More...

void	per_mode_initiator_tx_done_cb (trx_id_t trx, retval_t status, frame_info_t *frame)
	Callback that is called once tx is done in the PER_FOUND_PER_INITIATOR state . More...

void	per_mode_receptor_init (trx_id_t trx, void *parameter)
	Initialize the application in PER Measurement mode as Receptor. More...

void	per_mode_receptor_rx_cb (trx_id_t trx, frame_info_t *frame)
	Callback that is called if data has been received by trx in the PER_TEST_RECEPTOR state This call back is used when the node is operating as PER Measurement mode Receptor. More...

void	per_mode_receptor_task (trx_id_t trx)
	The application task when the node is in PER_TEST_RECEPTOR state i.e.PER Measurement mode as Receptor. More...

void	per_mode_receptor_tx_done_cb (trx_id_t trx, retval_t status, frame_info_t *frame)
	Callback that is called once tx is done in PER_TEST_RECEPTOR state This call back is used when the node is operating as PER Measurement mode Receptor. More...

uint8_t	scale_ed_to_reg_val (int8_t ed_val)

int8_t	scale_reg_value_to_ed (uint8_t reg_val)