registers definition for ili9341 TFT display component.
Copyright (c) 2014-2018 Microchip Technology Inc. and its subsidiaries.
| #define ILI9341_CMD_BACKLIGHT_CONTROL_1 0xB8 |
backlight control1
| #define ILI9341_CMD_BACKLIGHT_CONTROL_2 0xB9 |
backlight control2
| #define ILI9341_CMD_BACKLIGHT_CONTROL_3 0xBA |
backlight control3
| #define ILI9341_CMD_BACKLIGHT_CONTROL_4 0xBB |
backlight control 4
| #define ILI9341_CMD_BACKLIGHT_CONTROL_5 0xBC |
backlight control 5
| #define ILI9341_CMD_BACKLIGHT_CONTROL_7 0xBE |
backlight control 7
| #define ILI9341_CMD_BACKLIGHT_CONTROL_8 0xBF |
backlight control 8
| #define ILI9341_CMD_BLANKING_PORCH_CONTROL 0xB5 |
blanking porch control
| #define ILI9341_CMD_COLOR_SET 0x2D |
Color set.
| #define ILI9341_CMD_COLUMN_ADDRESS_SET 0x2A |
Column address set.
Referenced by ili9341_send_draw_limits(), ili93xx_send_draw_limits(), and ili93xx_set_window().
| #define ILI9341_CMD_DIGITAL_GAMMA_CONTROL_1 0xE2 |
digital gamma control 1
| #define ILI9341_CMD_DIGITAL_GAMMA_CONTROL_2 0xE3 |
digital gamma control 2
| #define ILI9341_CMD_DISP_INVERSION_OFF 0x20 |
Display inversion off.
| #define ILI9341_CMD_DISP_INVERSION_ON 0x21 |
Display inversion on.
| #define ILI9341_CMD_DISPLAY_FUNCTION_CTL 0xB6 |
display function control
Referenced by ili93xx_init().
| #define ILI9341_CMD_DISPLAY_INVERSION_CONTROL 0xB4 |
display inversion control
| #define ILI9341_CMD_DISPLAY_OFF 0x28 |
Display off.
Referenced by ili93xx_display_off().
| #define ILI9341_CMD_DISPLAY_ON 0x29 |
Display on.
Referenced by ili9341_exit_standby(), ili93xx_display_on(), and ili93xx_init().
| #define ILI9341_CMD_DRIVER_TIMING_CTL_A 0xE8 |
driver timing control A
Referenced by ili93xx_init().
| #define ILI9341_CMD_DRIVER_TIMING_CTL_B 0xEA |
driver timing control B
Referenced by ili93xx_init().
| #define ILI9341_CMD_ENABLE_3_GAMMA_CONTROL 0xF2 |
enable 3g gamma control
| #define ILI9341_CMD_ENTER_SLEEP_MODE 0x10 |
Enter sleep mode.
| #define ILI9341_CMD_ENTRY_MODE_SET 0xB7 |
entry mode set
| #define ILI9341_CMD_FRAME_RATE_CONTROL_IDLE_8COLOR 0xB2 |
frame control in idle mode
| #define ILI9341_CMD_FRAME_RATE_CONTROL_NORMAL 0xB1 |
frame control
| #define ILI9341_CMD_FRAME_RATE_CONTROL_PARTIAL 0xB3 |
frame control in partial mode
| #define ILI9341_CMD_GAMMA_SET 0x26 |
Gamma set.
| #define ILI9341_CMD_GET_SCANLINE 0x45 |
get scanline
| #define ILI9341_CMD_IDLE_MODE_OFF 0x38 |
Idle mode off.
| #define ILI9341_CMD_IDLE_MODE_ON 0x39 |
Idle mode on.
| #define ILI9341_CMD_INTERFACE_CONTROL 0xF6 |
Interface control.
| #define ILI9341_CMD_MEMORY_ACCESS_CONTROL 0x36 |
Memory Access control.
Referenced by ili9341_set_orientation(), ili93xx_init(), ili93xx_set_display_direction(), and ili93xx_set_orientation().
| #define ILI9341_CMD_MEMORY_ACCESS_CONTROL_BGR (0x1u << 3) |
Referenced by ili93xx_init(), and ili93xx_set_display_direction().
| #define ILI9341_CMD_MEMORY_ACCESS_CONTROL_MH (0x1u << 2) |
| #define ILI9341_CMD_MEMORY_ACCESS_CONTROL_ML (0x1u << 4) |
| #define ILI9341_CMD_MEMORY_ACCESS_CONTROL_MV (0x1u << 5) |
Referenced by ili93xx_set_display_direction().
| #define ILI9341_CMD_MEMORY_ACCESS_CONTROL_MX (0x1u << 6) |
Referenced by ili93xx_init(), and ili93xx_set_display_direction().
| #define ILI9341_CMD_MEMORY_ACCESS_CONTROL_MY (0x1u << 7) |
| #define ILI9341_CMD_MEMORY_READ 0x2E |
Memory read.
Referenced by ili9341_copy_pixels_from_screen(), ili9341_read_gram(), ili93xx_read_gram(), and ili93xx_read_ram_prepare().
| #define ILI9341_CMD_MEMORY_WRITE 0x2C |
| #define ILI9341_CMD_NEGATIVE_GAMMA_CORRECTION 0xE1 |
negative gamma correction
| #define ILI9341_CMD_NOP 0x00 |
ili9341 LCD Registers
Level 1 Commands (from the display Datasheet) Nop operation
| #define ILI9341_CMD_NORMAL_DISP_MODE_ON 0x13 |
Normal display mode on.
Referenced by ili93xx_disable_scroll().
| #define ILI9341_CMD_NVMEM_PROTECTION_KEY 0xD1 |
NV memory protection key.
| #define ILI9341_CMD_NVMEM_STATUS_READ 0xD2 |
NV memory status read.
| #define ILI9341_CMD_NVMEM_WRITE 0xD0 |
NV memory write.
| #define ILI9341_CMD_PAGE_ADDRESS_SET 0x2B |
Page address set.
Referenced by ili9341_send_draw_limits(), ili93xx_send_draw_limits(), and ili93xx_set_window().
| #define ILI9341_CMD_PARTIAL_AREA 0x30 |
Partial area.
| #define ILI9341_CMD_PARTIAL_MODE_ON 0x12 |
Partial mode on.
| #define ILI9341_CMD_PIXEL_FORMAT_SET 0x3A |
Pixel Format set.
Referenced by ili93xx_init().
| #define ILI9341_CMD_POSITIVE_GAMMA_CORRECTION 0xE0 |
positive gamma correction
| #define ILI9341_CMD_POWER_CONTROL_1 0xC0 |
power control 1
Referenced by ili9341_controller_init_registers(), and ili93xx_init().
| #define ILI9341_CMD_POWER_CONTROL_2 0xC1 |
power control 2
Referenced by ili9341_controller_init_registers(), and ili93xx_init().
| #define ILI9341_CMD_POWER_CONTROL_A 0xCB |
Power control A.
Referenced by ili9341_controller_init_registers(), and ili93xx_init().
| #define ILI9341_CMD_POWER_CONTROL_B 0xCF |
Power control B.
Referenced by ili9341_controller_init_registers(), and ili93xx_init().
| #define ILI9341_CMD_POWER_ON_SEQUENCE_CONTROL 0xED |
power-on sequence control
| #define ILI9341_CMD_PUMP_RATIO_CONTROL 0xF7 |
pump ration control
Referenced by ili9341_controller_init_registers(), and ili93xx_init().
| #define ILI9341_CMD_READ_CONTENT_ADAPT_BRIGHTNESS 0x56 |
read content adaptive brightness control
| #define ILI9341_CMD_READ_CTRL_DISPLAY 0x54 |
read control display
| #define ILI9341_CMD_READ_DISP_ID 0x04 |
Read Display Identification information.
| #define ILI9341_CMD_READ_DISP_IMAGE_FORMAT 0x0D |
Read display image format.
Referenced by run_test_init().
| #define ILI9341_CMD_READ_DISP_MADCTRL 0x0B |
Read display MADCTL.
Referenced by run_test_init().
| #define ILI9341_CMD_READ_DISP_PIXEL_FORMAT 0x0C |
Read display pixel format.
Referenced by run_test_init().
| #define ILI9341_CMD_READ_DISP_POWER_MODE 0x0A |
Read display power mode.
Referenced by run_test_init().
| #define ILI9341_CMD_READ_DISP_SELF_DIAGNOSTIC 0x0F |
read display self-diagnostic resutl
| #define ILI9341_CMD_READ_DISP_SIGNAL_MODE 0x0E |
Read display signal mode.
Referenced by run_test_init().
| #define ILI9341_CMD_READ_DISP_STATUS 0x09 |
Read display status.
Referenced by run_test_control_setting().
| #define ILI9341_CMD_READ_DISPLAY_BRIGHTNESS 0x52 |
read display brightness
| #define ILI9341_CMD_READ_ID1 0xDA |
Read ID1.
| #define ILI9341_CMD_READ_ID2 0xDB |
Read ID2.
| #define ILI9341_CMD_READ_ID3 0xDC |
Read ID3.
| #define ILI9341_CMD_READ_ID4 0xD3 |
Read ID4.
Referenced by ili93xx_device_type_identify().
| #define ILI9341_CMD_READ_MEMORY_CONTINUE 0x3E |
Read memory continue.
| #define ILI9341_CMD_READ_MIN_CAB_LEVEL 0x5F |
read CABC minimum brightness
| #define ILI9341_CMD_RGB_SIGNAL_CONTROL 0xB0 |
Level 2 Commands (from the display Datasheet)
RGB interface signal control
| #define ILI9341_CMD_SET_TEAR_SCANLINE 0x44 |
set tear scanline
| #define ILI9341_CMD_SLEEP_OUT 0x11 |
Sleep out.
Referenced by ili9341_exit_standby(), and ili93xx_init().
| #define ILI9341_CMD_SOFTWARE_RESET 0x01 |
Software reset.
| #define ILI9341_CMD_TEARING_EFFECT_LINE_OFF 0x34 |
Tearing effect line off.
| #define ILI9341_CMD_TEARING_EFFECT_LINE_ON 0x35 |
Tearing effect line on.
| #define ILI9341_CMD_VCOM_CONTROL_1 0xC5 |
VCOM control 1.
Referenced by ili9341_controller_init_registers(), and ili93xx_init().
| #define ILI9341_CMD_VCOM_CONTROL_2 0xC7 |
VCOM control 2.
Referenced by ili9341_controller_init_registers(), and ili93xx_init().
| #define ILI9341_CMD_VERT_SCROLL_DEFINITION 0x33 |
Vertical scrolling definition.
Referenced by ili93xx_vscroll_area_define().
| #define ILI9341_CMD_VERT_SCROLL_START_ADDRESS 0x37 |
Vetical scrolling start address.
Referenced by ili93xx_scroll().
| #define ILI9341_CMD_WRITE_CONTENT_ADAPT_BRIGHTNESS 0x55 |
write content adaptive brightness control
| #define ILI9341_CMD_WRITE_CTRL_DISPLAY 0x53 |
write control display
| #define ILI9341_CMD_WRITE_DISPLAY_BRIGHTNESS 0x51 |
write display brightness
| #define ILI9341_CMD_WRITE_MEMORY_CONTINUE 0x3C |
write memory continue
Referenced by gfx_draw_bmpfile(), ili93xx_copy_pixels_to_screen(), ili93xx_copy_raw_pixel_24bits_to_screen(), ili93xx_duplicate_pixel(), ili93xx_write_gram(), and ili93xx_write_ram_prepare().
| #define ILI9341_CMD_WRITE_MIN_CAB_LEVEL 0x5E |
write CABC minimum brightness
| #define ILI9341_DISP_FUNC_CTL_GS (0x1u << 6) |
| #define ILI9341_DISP_FUNC_CTL_ISC | ( | value | ) |
| #define ILI9341_DISP_FUNC_CTL_ISC_MSK (0x0F << 0) |
| #define ILI9341_DISP_FUNC_CTL_ISC_POS 0 |
| #define ILI9341_DISP_FUNC_CTL_REV (0x1u << 7) |
| #define ILI9341_DISP_FUNC_CTL_SM (0x1u << 4) |
| #define ILI9341_DISP_FUNC_CTL_SS (0x1u << 5) |
1.8.5