|
| #define | AT_BLE_ADDR_LEN 6 |
| | BLE address length. More...
|
| |
| #define | AT_BLE_ADV_INTERVAL_MAX 0x4000 |
| | Maximum Advertising interval in 625 us units, i.e. More...
|
| |
| #define | AT_BLE_ADV_INTERVAL_MIN 0x0020 |
| | Minimum Advertising interval in 625 us units, i.e. More...
|
| |
| #define | AT_BLE_ADV_MAX_SIZE 31 |
| | Maximum size of advertising data in octets. More...
|
| |
| #define | AT_BLE_ADV_NONCON_INTERVAL_MIN 0x00A0 |
| | Minimum Advertising interval in 625 us units for non connectable mode, i.e. More...
|
| |
| #define | AT_BLE_GAP_WHITELIST_ADDR_MAX_COUNT (8) |
| | Maximum amount of addresses in a white-list. More...
|
| |
| #define | AT_BLE_GAP_WHITELIST_IRK_MAX_COUNT (8) |
| | Maximum amount of IRKs in a white-list. More...
|
| |
| #define | AT_BLE_MAX_ATT_LEN 512 |
| | ATT Maximum Attribute Length. More...
|
| |
| #define | AT_BLE_MAX_KEY_LEN (16) |
| | BLE security key maximum length. More...
|
| |
| #define | AT_BLE_PASSKEY_LEN (6) |
| | GAP Security Key Length. More...
|
| |
| #define | AT_BLE_SCAN_INTERVAL_MAX 0x4000 |
| | Maximum scanning interval in 625 us units , i.e. More...
|
| |
| #define | AT_BLE_SCAN_INTERVAL_MIN 0x0004 |
| | Minimum scanning interval in 625 us units , i.e. More...
|
| |
| #define | AT_BLE_SCAN_WINDOW_MAX 0x4000 |
| | Maximum scanning window in 625 us units , i.e. More...
|
| |
| #define | AT_BLE_SCAN_WINDOW_MIN 0x0004 |
| | Minimum scanning window in 625 us units , i.e. More...
|
| |
| #define | AT_BLE_UUID_128_LEN (16) |
| | UUID 128 size in bytes. More...
|
| |
| #define | AT_BLE_UUID_16_LEN (2) |
| | UUID 16 size in bytes. More...
|
| |
| #define | AT_BLE_UUID_32_LEN (4) |
| | UUID 32 size in bytes. More...
|
| |
| #define | AT_CNX_INTERVAL_MAX 3200 |
| | Maximum Connection interval in 1.250ms units, i.e. More...
|
| |
| #define | AT_CNX_INTERVAL_MIN 6 |
| | Minimum Connection interval in 1.250ms units, i.e. More...
|
| |
| #define | AT_CNX_LATENCY_MAX 499 |
| | Maximum Connection latency (number of connection events that may be missed). More...
|
| |
| #define | AT_CNX_LATENCY_MIN 0 |
| | Minimum Connection latency (number of connection events that may be missed). More...
|
| |
| #define | AT_CNX_SUP_TO_MAX 3200 |
| | Maximum Supervision timeout in 10ms units, i.e. More...
|
| |
| #define | AT_CNX_SUP_TO_MIN 10 |
| | Minimum Supervision timeout in 10ms units, i.e. More...
|
| |
| #define | AT_DEFAULT_MTU 0x0017 |
| | Maximum Transmission Unit. More...
|
| |
|
| enum | at_ble_addr_type_t {
AT_BLE_ADDRESS_PUBLIC,
AT_BLE_ADDRESS_RANDOM_STATIC,
AT_BLE_ADDRESS_RANDOM_PRIVATE_RESOLVABLE,
AT_BLE_ADDRESS_RANDOM_PRIVATE_NON_RESOLVABLE,
AT_BLE_ADDRESS_INVALID,
AT_BLE_ADDRESS_PUBLIC,
AT_BLE_ADDRESS_RANDOM_STATIC,
AT_BLE_ADDRESS_RANDOM_PRIVATE_RESOLVABLE,
AT_BLE_ADDRESS_RANDOM_PRIVATE_NON_RESOLVABLE
} |
| | BLE can accept either public or random addresses. More...
|
| |
| enum | at_ble_adv_mode_t {
AT_BLE_ADV_NON_DISCOVERABLE,
AT_BLE_ADV_GEN_DISCOVERABLE,
AT_BLE_ADV_LIM_DISCOVERABLE,
AT_BLE_ADV_BROADCASTER_MODE,
AT_BLE_ADV_NON_DISCOVERABLE,
AT_BLE_ADV_GEN_DISCOVERABLE,
AT_BLE_ADV_LIM_DISCOVERABLE,
AT_BLE_ADV_BROADCASTER_MODE
} |
| | Advertising Mode. More...
|
| |
| enum | at_ble_adv_type_t {
AT_BLE_ADV_TYPE_UNDIRECTED = 0x00,
AT_BLE_ADV_TYPE_DIRECTED,
AT_BLE_ADV_TYPE_SCANNABLE_UNDIRECTED,
AT_BLE_ADV_TYPE_NONCONN_UNDIRECTED,
AT_BLE_ADV_TYPE_SCAN_RESPONSE,
AT_BLE_ADV_TYPE_UNDIRECTED = 0x00,
AT_BLE_ADV_TYPE_DIRECTED,
AT_BLE_ADV_TYPE_SCANNABLE_UNDIRECTED,
AT_BLE_ADV_TYPE_NONCONN_UNDIRECTED,
AT_BLE_ADV_TYPE_DIRECTED_LDC,
AT_BLE_ADV_TYPE_SCAN_RESPONSE
} |
| | GAP Advertising types. More...
|
| |
| enum | at_ble_att_write_perm_t {
AT_BLE_WRITE_DISABLE,
AT_BLE_WRITE_ENABLE,
AT_BLE_WRITE_UNAUTH,
AT_BLE_WRITE_AUTH,
AT_BLE_WRITE_DISABLE = 0,
AT_BLE_WRITE_ENABLE,
AT_BLE_WRITE_UNAUTH,
AT_BLE_WRITE_AUTH
} |
| | Write access. More...
|
| |
| enum | at_ble_attr_permissions_t {
AT_BLE_ATTR_NO_PERMISSIONS = 0x00,
AT_BLE_ATTR_READABLE_NO_AUTHN_NO_AUTHR = 0x01,
AT_BLE_ATTR_READABLE_REQ_AUTHN_NO_AUTHR = 0x02,
AT_BLE_ATTR_READABLE_NO_AUTHN_REQ_AUTHR = 0x03,
AT_BLE_ATTR_READABLE_REQ_AUTHN_REQ_AUTHR = 0x04,
AT_BLE_ATTR_WRITABLE_NO_AUTHN_NO_AUTHR = 0x10,
AT_BLE_ATTR_WRITABLE_REQ_AUTHN_NO_AUTHR = 0x20,
AT_BLE_ATTR_WRITABLE_NO_AUTHN_REQ_AUTHR = 0x30,
AT_BLE_ATTR_WRITABLE_REQ_AUTHN_REQ_AUTHR = 0x40
} |
| | Attribute Permissions. More...
|
| |
| enum | at_ble_auth_levels_t {
AT_BLE_NO_SEC = 0x00,
AT_BLE_MODE1_L2_NOAUTH_PAIR_ENC,
AT_BLE_MODE1_L3_AUTH_PAIR_ENC,
AT_BLE_MODE2_L1_NOAUTH_DATA_SGN,
AT_BLE_MODE2_L2_AUTH_DATA_SGN,
AT_BLE_MODE1_L2_AUTH_PAIR_ENC,
AT_BLE_NO_SEC = 0x00,
AT_BLE_MODE1_L1_NOAUTH_PAIR_ENC,
AT_BLE_MODE1_L2_AUTH_PAIR_ENC,
AT_BLE_MODE2_L1_NOAUTH_DATA_SGN,
AT_BLE_MODE2_L2_AUTH_DATA_SGN
} |
| | Security authentication level. More...
|
| |
| enum | at_ble_auth_t {
AT_BLE_AUTH_NO_MITM_NO_BOND,
AT_BLE_AUTH_NO_MITM_BOND = 0x01,
AT_BLE_AUTH_MITM_NO_BOND = 0x04,
AT_BLE_AUTH_MITM_BOND = 0x05,
AT_BLE_AUTH_NO_MITM_NO_BOND,
AT_BLE_AUTH_NO_MITM_BOND = 0x01,
AT_BLE_AUTH_MITM_NO_BOND = 0x04,
AT_BLE_AUTH_MITM_BOND
} |
| | Authorization Types. More...
|
| |
| enum | at_ble_author_t {
GAP_AUTHZ_NOT_SET = 0x00,
GAP_AUTHZ_ACCEPT = 0x01,
GAP_AUTHZ_REJECT = 0x02,
GAP_AUTHZ_NOT_SET = 0x00,
GAP_AUTHZ_ACCEPT = 0x01,
GAP_AUTHZ_REJECT = 0x02
} |
| | Authorization setting. More...
|
| |
| enum | at_ble_char_pres_format_t {
AT_BLE_PRES_FORMAT_BOOLEAN = 0X01,
AT_BLE_PRES_FORMAT_2BIT = 0X02,
AT_BLE_PRES_FORMAT_NIBBLE = 0X03,
AT_BLE_PRES_FORMAT_UINT8 = 0X04,
AT_BLE_PRES_FORMAT_UINT12 = 0X05,
AT_BLE_PRES_FORMAT_UINT16 = 0X06,
AT_BLE_PRES_FORMAT_UINT24 = 0X07,
AT_BLE_PRES_FORMAT_UINT32 = 0X08,
AT_BLE_PRES_FORMAT_UINT48 = 0X09,
AT_BLE_PRES_FORMAT_UINT64 = 0X0A,
AT_BLE_PRES_FORMAT_UINT128 = 0X0B,
AT_BLE_PRES_FORMAT_SINT8 = 0X0C,
AT_BLE_PRES_FORMAT_SINT12 = 0X0D,
AT_BLE_PRES_FORMAT_SINT16 = 0X0E,
AT_BLE_PRES_FORMAT_SINT24 = 0X0F,
AT_BLE_PRES_FORMAT_SINT32 = 0X10,
AT_BLE_PRES_FORMAT_SINT48 = 0X11,
AT_BLE_PRES_FORMAT_SINT64 = 0X12,
AT_BLE_PRES_FORMAT_SINT128 = 0X13,
AT_BLE_PRES_FORMAT_FLOAT32 = 0X14,
AT_BLE_PRES_FORMAT_FLOAT64 = 0X15,
AT_BLE_PRES_FORMAT_SFLOAT = 0X16,
AT_BLE_PRES_FORMAT_FLOAT = 0X17,
AT_BLE_PRES_FORMAT_DUINT16 = 0X18,
AT_BLE_PRES_FORMAT_UTF8S = 0X19,
AT_BLE_PRES_FORMAT_UTF16S = 0X1A,
AT_BLE_PRES_FORMAT_STRUCT = 0X1B,
AT_BLE_PRES_FORMAT_BOOLEAN = 0X01,
AT_BLE_PRES_FORMAT_2BIT = 0X02,
AT_BLE_PRES_FORMAT_NIBBLE = 0X03,
AT_BLE_PRES_FORMAT_UINT8 = 0X04,
AT_BLE_PRES_FORMAT_UINT12 = 0X05,
AT_BLE_PRES_FORMAT_UINT16 = 0X06,
AT_BLE_PRES_FORMAT_UINT24 = 0X07,
AT_BLE_PRES_FORMAT_UINT32 = 0X08,
AT_BLE_PRES_FORMAT_UINT48 = 0X09,
AT_BLE_PRES_FORMAT_UINT64 = 0X0A,
AT_BLE_PRES_FORMAT_UINT128 = 0X0B,
AT_BLE_PRES_FORMAT_SINT8 = 0X0C,
AT_BLE_PRES_FORMAT_SINT12 = 0X0D,
AT_BLE_PRES_FORMAT_SINT16 = 0X0E,
AT_BLE_PRES_FORMAT_SINT24 = 0X0F,
AT_BLE_PRES_FORMAT_SINT32 = 0X10,
AT_BLE_PRES_FORMAT_SINT48 = 0X11,
AT_BLE_PRES_FORMAT_SINT64 = 0X12,
AT_BLE_PRES_FORMAT_SINT128 = 0X13,
AT_BLE_PRES_FORMAT_FLOAT32 = 0X14,
AT_BLE_PRES_FORMAT_FLOAT64 = 0X15,
AT_BLE_PRES_FORMAT_SFLOAT = 0X16,
AT_BLE_PRES_FORMAT_FLOAT = 0X17,
AT_BLE_PRES_FORMAT_DUINT16 = 0X18,
AT_BLE_PRES_FORMAT_UTF8S = 0X19,
AT_BLE_PRES_FORMAT_UTF16S = 0X1A,
AT_BLE_PRES_FORMAT_STRUCT = 0X1B
} |
| | Presentation Formats. More...
|
| |
| enum | at_ble_char_properties_t {
AT_BLE_CHAR_BROADCST = (1 << 0),
AT_BLE_CHAR_READ = (1 << 1),
AT_BLE_CHAR_WRITE_WITHOUT_RESPONSE = (1 << 2),
AT_BLE_CHAR_WRITE = (1 << 3),
AT_BLE_CHAR_NOTIFY = (1 << 4),
AT_BLE_CHAR_INDICATE = (1 << 5),
AT_BLE_CHAR_SIGNED_WRITE = (1 << 6),
AT_BLE_CHAR_RELIABLE_WRITE = (1 << 7),
AT_BLE_CHAR_WRITEABLE_AUX = (1 << 8)
} |
| | Characteristic properties (Each enum value is a single bit; multiple properties can be indicated simultaneously.) More...
|
| |
| enum | at_ble_disconnect_reason_t {
AT_BLE_TERMINATED_BY_USER,
AT_BLE_UNACCEPTABLE_INTERVAL,
AT_BLE_AUTH_FAILURE = 0x05,
AT_BLE_TERMINATED_BY_USER = 0x13,
AT_BLE_REMOTE_DEV_TERM_LOW_RESOURCES,
AT_BLE_REMOTE_DEV_POWER_OFF,
AT_BLE_UNSUPPORTED_REMOTE_FEATURE = 0x1A,
AT_BLE_PAIRING_WITH_UNIT_KEY_NOT_SUP = 0x29,
AT_BLE_UNACCEPTABLE_INTERVAL = 0x3B
} |
| | Disconnection reasons. More...
|
| |
| enum | at_ble_events_t {
AT_BLE_UNDEFINED_EVENT,
AT_BLE_SCAN_INFO,
AT_BLE_SCAN_REPORT,
AT_BLE_RAND_ADDR_CHANGED,
AT_BLE_CONNECTED,
AT_BLE_DISCONNECTED,
AT_BLE_CONN_PARAM_UPDATE_DONE,
AT_BLE_CONN_PARAM_UPDATE_REQUEST,
AT_BLE_RX_POWER_VALUE,
AT_BLE_PAIR_DONE,
AT_BLE_PAIR_REQUEST,
AT_BLE_SLAVE_SEC_REQUEST,
AT_BLE_PAIR_KEY_REQUEST,
AT_BLE_ENCRYPTION_REQUEST,
AT_BLE_ENCRYPTION_STATUS_CHANGED,
AT_BLE_RESOLV_RAND_ADDR_STATUS,
AT_BLE_PRIMARY_SERVICE_FOUND,
AT_BLE_INCLUDED_SERVICE_FOUND,
AT_BLE_CHARACTERISTIC_FOUND,
AT_BLE_DESCRIPTOR_FOUND,
AT_BLE_DISCOVERY_COMPLETE,
AT_BLE_CHARACTERISTIC_READ_RESPONSE,
AT_BLE_CHARACTERISTIC_READ_MULTIBLE_RESPONSE,
AT_BLE_CHARACTERISTIC_WRITE_RESPONSE,
AT_BLE_NOTIFICATION_RECEIVED,
AT_BLE_INDICATION_RECEIVED,
AT_BLE_INDICATION_CONFIRMED,
AT_BLE_CHARACTERISTIC_CHANGED,
AT_BLE_SERVICE_CHANGED_NOTIFICATION_CONFIRMED,
AT_BLE_WRITE_AUTHORIZE_REQUEST,
AT_BLE_READ_AUTHORIZE_REQUEST,
AT_BLE_L2CAP_RX,
AT_BLE_WIFIPROV_SCAN_MODE_CHANGE_IND = AT_BLE_L2CAP_RX+7,
AT_BLE_WIFIPROV_COMPLETE_IND,
AT_BLE_CUSTOM_EVENT,
AT_BLE_TX_POWER_VALUE,
AT_BLE_TX_POWER_SET,
AT_BLE_MAX_PA_GAIN_VALUE,
AT_BLE_MTU_CHANGED_CMD_COMPLETE,
AT_BLE_CHARACTERISTIC_WRITE_CMD_CMP,
AT_BLE_NOTIFICATION_CONFIRMED,
AT_BLE_UNDEFINED_EVENT,
AT_BLE_SCAN_INFO,
AT_BLE_SCAN_REPORT,
AT_BLE_ADV_CMP_EVENT,
AT_BLE_ADV_REPORT,
AT_BLE_RAND_ADDR_CHANGED,
AT_BLE_CONNECTED,
AT_BLE_DISCONNECTED,
AT_BLE_CONN_PARAM_UPDATE_DONE,
AT_BLE_CONN_PARAM_UPDATE_REQUEST,
AT_BLE_PAIR_DONE,
AT_BLE_PAIR_REQUEST,
AT_BLE_SLAVE_SEC_REQUEST,
AT_BLE_PAIR_KEY_REQUEST,
AT_BLE_ENCRYPTION_REQUEST,
AT_BLE_ENCRYPTION_STATUS_CHANGED,
AT_BLE_RESOLV_RAND_ADDR_STATUS,
AT_BLE_SIGN_COUNTERS_IND,
AT_BLE_PEER_ATT_INFO_IND,
AT_BLE_CON_CHANNEL_MAP_IND,
AT_BLE_PRIMARY_SERVICE_FOUND,
AT_BLE_INCLUDED_SERVICE_FOUND,
AT_BLE_CHARACTERISTIC_FOUND,
AT_BLE_DESCRIPTOR_FOUND,
AT_BLE_DISCOVERY_COMPLETE,
AT_BLE_CHARACTERISTIC_READ_RESPONSE,
AT_BLE_CHARACTERISTIC_READ_BY_UUID_RESPONSE = AT_BLE_CHARACTERISTIC_READ_RESPONSE,
AT_BLE_CHARACTERISTIC_READ_MULTIBLE_RESPONSE,
AT_BLE_CHARACTERISTIC_WRITE_RESPONSE,
AT_BLE_NOTIFICATION_RECIEVED,
AT_BLE_INDICATION_RECIEVED,
AT_BLE_NOTIFICATION_CONFIRMED,
AT_BLE_INDICATION_CONFIRMED,
AT_BLE_CHARACTERISTIC_CHANGED,
AT_BLE_CHARACTERISTIC_CONFIGURATION_CHANGED,
AT_BLE_SERVICE_CHANGED_INDICATION_SENT,
AT_BLE_WRITE_AUTHORIZE_REQUEST,
AT_BLE_MTU_CHANGED_INDICATION,
AT_BLE_MTU_CHANGED_CMD_COMPLETE,
AT_BLE_CHARACTERISTIC_WRITE_CMD_CMP,
AT_BLE_READ_AUTHORIZE_REQUEST,
AT_BLE_LECB_CONN_REQ,
AT_BLE_LECB_CONNECTED,
AT_BLE_LECB_DISCONNECTED,
AT_BLE_LECB_ADD_CREDIT_IND,
AT_BLE_LECB_SEND_RESP,
AT_BLE_LECB_DATA_RECIEVED,
AT_BLE_HTPT_CREATE_DB_CFM,
AT_BLE_HTPT_ERROR_IND,
AT_BLE_HTPT_DISABLE_IND,
AT_BLE_HTPT_TEMP_SEND_CFM,
AT_BLE_HTPT_MEAS_INTV_CHG_IND,
AT_BLE_HTPT_CFG_INDNTF_IND,
AT_BLE_HTPT_ENABLE_RSP,
AT_BLE_HTPT_MEAS_INTV_UPD_RSP,
AT_BLE_HTPT_MEAS_INTV_CHG_REQ,
AT_BLE_LE_TEST_STATUS,
AT_BLE_LE_PACKET_REPORT,
AT_BLE_CUSTOM_EVENT,
AT_BLE_DEVICE_READY,
AT_BLE_DEVICE_DEAD,
AT_BLE_DEVICE_OUT_OF_SYNC,
AT_BLE_EVENT_MAX
} |
| | Events delivered from BLE stack to the application layer. More...
|
| |
| enum | at_ble_filter_type_t {
AT_BLE_ADV_FP_ANY,
AT_BLE_ADV_FP_FILTER_SCANREQ,
AT_BLE_ADV_FP_FILTER_CONNREQ,
AT_BLE_ADV_FP_FILTER_BOTH,
AT_BLE_ADV_FP_ANY,
AT_BLE_ADV_FP_FILTER_SCANREQ,
AT_BLE_ADV_FP_FILTER_CONNREQ,
AT_BLE_ADV_FP_FILTER_BOTH
} |
| | Advertising Filter Policy. More...
|
| |
| enum | at_ble_gap_role {
AT_BLE_GAP_NO_ROLE = 0x00,
AT_BLE_GAP_OBSERVER_SCA = 0x01,
AT_BLE_GAP_BROADCASTER_ADV = 0x02,
AT_BLE_GAP_CENTRAL_MST = (0x04 | AT_BLE_GAP_OBSERVER_SCA),
AT_BLE_GAP_PERIPHERAL_SLV = (0x08 | AT_BLE_GAP_BROADCASTER_ADV)
} |
| | GAP Role. More...
|
| |
| enum | at_ble_gattc_discovery_complete_status_t {
AT_BLE_DISCOVERY_SUCCESS =0x00,
AT_BLE_DISCOVERY_FAILURE
} |
| | Discovery status. More...
|
| |
| enum | at_ble_iocab_t {
AT_BLE_IO_CAP_DISPLAY_ONLY,
AT_BLE_IO_CAP_DISPLAY_YES_NO,
AT_BLE_IO_CAP_KB_ONLY,
AT_BLE_IO_CAP_NO_INPUT_NO_OUTPUT,
AT_BLE_IO_CAP_KB_DISPLAY,
AT_BLE_IO_CAP_DISPLAY_ONLY,
AT_BLE_IO_CAP_DISPLAY_YES_NO,
AT_BLE_IO_CAP_KB_ONLY,
AT_BLE_IO_CAP_NO_INPUT_NO_OUTPUT,
AT_BLE_IO_CAP_KB_DISPLAY
} |
| | IO capabilities of a device. More...
|
| |
| enum | at_ble_key_dis_t {
AT_BLE_KEY_DIST_NONE = 0x00,
AT_BLE_KEY_DIST_ENC = (1 << 0),
AT_BLE_KEY_DIST_ID = (1 << 1),
AT_BLE_KEY_DIST_SIGN = (1 << 2),
AT_BLE_KEY_DIS_ALL,
AT_BLE_KEY_DIST_NONE = 0x00,
AT_BLE_KEY_DIST_ENC = (1 << 0),
AT_BLE_KEY_DIST_ID = (1 << 1),
AT_BLE_KEY_DIST_SIGN = (1 << 2),
AT_BLE_KEY_DIS_ALL
} |
| | Security keys distribution list. More...
|
| |
| enum | at_ble_pair_key_type_t {
AT_BLE_PAIR_PASSKEY,
AT_BLE_PAIR_OOB,
AT_BLE_PAIR_PASSKEY,
AT_BLE_PAIR_OOB
} |
| | Pairing Key Types. More...
|
| |
| enum | at_ble_parameters_t {
AT_BLE_GAP_GEN_DISC_ADV_MIN =0,
AT_BLE_GAP_LIM_ADV_TIMEOUT,
AT_BLE_GAP_GEN_DISC_SCAN,
AT_BLE_GAP_LIM_DISC_SCAN,
AT_BLE_GAP_CONN_EST_ADV_TIMEOUT,
AT_BLE_GAP_CONN_PARAM_TIMEOUT,
AT_BLE_GAP_LIM_DISC_ADV_INT_MIN,
AT_BLE_GAP_LIM_DISC_ADV_INT_MAX,
AT_BLE_GAP_GEN_DISC_ADV_INT_MIN,
AT_BLE_GAP_GEN_DISC_ADV_INT_MAX,
AT_BLE_GAP_CONN_ADV_INT_MIN,
AT_BLE_GAP_CONN_ADV_INT_MAX,
AT_BLE_GAP_CONN_SCAN_INT,
AT_BLE_GAP_CONN_SCAN_WIND,
AT_BLE_GAP_CONN_HIGH_SCAN_INT,
AT_BLE_GAP_CONN_HIGH_SCAN_WIND,
AT_BLE_GAP_GEN_DISC_SCAN_INT,
AT_BLE_GAP_GEN_DISC_SCAN_WIND,
AT_BLE_GAP_LIM_DISC_SCAN_INT,
AT_BLE_GAP_LIM_DISC_SCAN_WIND,
AT_BLE_GAP_CONN_EST_ADV,
AT_BLE_GAP_CONN_EST_INT_MIN,
AT_BLE_GAP_CONN_EST_INT_MAX,
AT_BLE_GAP_CONN_EST_SCAN_INT,
AT_BLE_GAP_CONN_EST_SCAN_WIND,
AT_BLE_GAP_CONN_EST_SUPERV_TIMEOUT,
AT_BLE_GAP_CONN_EST_LATENCY,
AT_BLE_GAP_CONN_EST_MIN_CE_LEN,
AT_BLE_GAP_CONN_EST_MAX_CE_LEN,
AT_BLE_GAP_PRIVATE_ADDR_INT,
AT_BLE_GAP_CONN_PAUSE_CENTRAL,
AT_BLE_GAP_CONN_PAUSE_PERIPHERAL,
AT_BLE_GAP_GEN_DISC_ADV_MIN = 0,
AT_BLE_GAP_LIM_ADV_TIMEOUT,
AT_BLE_GAP_GEN_DISC_SCAN,
AT_BLE_GAP_LIM_DISC_SCAN,
AT_BLE_GAP_CONN_EST_ADV_TIMEOUT,
AT_BLE_GAP_CONN_PARAM_TIMEOUT,
AT_BLE_GAP_LIM_DISC_ADV_INT_MIN,
AT_BLE_GAP_LIM_DISC_ADV_INT_MAX,
AT_BLE_GAP_GEN_DISC_ADV_INT_MIN,
AT_BLE_GAP_GEN_DISC_ADV_INT_MAX,
AT_BLE_GAP_CONN_ADV_INT_MIN,
AT_BLE_GAP_CONN_ADV_INT_MAX,
AT_BLE_GAP_CONN_SCAN_INT,
AT_BLE_GAP_CONN_SCAN_WIND,
AT_BLE_GAP_CONN_HIGH_SCAN_INT,
AT_BLE_GAP_CONN_HIGH_SCAN_WIND,
AT_BLE_GAP_GEN_DISC_SCAN_INT,
AT_BLE_GAP_GEN_DISC_SCAN_WIND,
AT_BLE_GAP_LIM_DISC_SCAN_INT,
AT_BLE_GAP_LIM_DISC_SCAN_WIND,
AT_BLE_GAP_CONN_EST_ADV,
AT_BLE_GAP_CONN_EST_INT_MIN,
AT_BLE_GAP_CONN_EST_INT_MAX,
AT_BLE_GAP_CONN_EST_SCAN_INT,
AT_BLE_GAP_CONN_EST_SCAN_WIND,
AT_BLE_GAP_CONN_EST_SUPERV_TIMEOUT,
AT_BLE_GAP_CONN_EST_LATENCY,
AT_BLE_GAP_CONN_EST_MIN_CE_LEN,
AT_BLE_GAP_CONN_EST_MAX_CE_LEN,
AT_BLE_GAP_PRIVATE_ADDR_INT,
AT_BLE_GAP_CONN_PAUSE_CENTRAL,
AT_BLE_GAP_CONN_PAUSE_PERIPHERAL
} |
| | Enumeration for GAP Parameters. More...
|
| |
| enum | at_ble_passkey_type_t {
AT_BLE_PAIR_PASSKEY_ENTRY,
AT_BLE_PAIR_PASSKEY_DISPLAY,
AT_BLE_PAIR_PASSKEY_ENTRY,
AT_BLE_PAIR_PASSKEY_DISPLAY
} |
| | Passkey Types. More...
|
| |
| enum | at_ble_prf_con_type_t {
PRF_CON_DISCOVERY = 0x00,
PRF_CON_NORMAL = 0x01,
PRF_CON_DISCOVERY = 0x00,
PRF_CON_NORMAL = 0x01
} |
| | Connection type. More...
|
| |
| enum | at_ble_scan_mode_t {
AT_BLE_SCAN_GEN_DISCOVERY,
AT_BLE_SCAN_LIM_DISCOVERY,
AT_BLE_SCAN_OBSERVER_MODE,
AT_BLE_SCAN_GEN_DISCOVERY,
AT_BLE_SCAN_LIM_DISCOVERY,
AT_BLE_SCAN_OBSERVER_MODE
} |
| | Scan modes used at at_ble_scan_start. More...
|
| |
| enum | at_ble_scan_type_t {
AT_BLE_SCAN_PASSIVE,
AT_BLE_SCAN_ACTIVE,
AT_BLE_SCAN_PASSIVE,
AT_BLE_SCAN_ACTIVE
} |
| | Scan types used at at_ble_scan_start. More...
|
| |
| enum | at_ble_status_t {
AT_BLE_SUCCESS =0,
AT_BLE_FAILURE,
AT_BLE_INVALID_PARAM,
AT_BLE_PRIVACY_CFG_PB,
AT_BLE_COMMAND_DISALLOWED,
AT_BLE_INVALID_STATE,
AT_BLE_INVALID_HANDLE,
AT_BLE_INSUFF_RESOURCE,
AT_BLE_INVALID_ATTRIBUTE_VAL_LEN,
AT_BLE_TIMEOUT,
AT_BLE_FW_INCOMPAT
} |
| | Enumeration for BLE Status. More...
|
| |
| enum | at_ble_uuid_type_t {
AT_BLE_UUID_16,
AT_BLE_UUID_32,
AT_BLE_UUID_128,
AT_BLE_UUID_INVALID,
AT_BLE_UUID_16 = 0,
AT_BLE_UUID_32 = 1,
AT_BLE_UUID_128 = 2,
AT_BLE_UUID_INVALID = 3
} |
| | UUID Type. More...
|
| |
|
| at_ble_status_t | at_ble_addr_get (at_ble_addr_t *address) |
| | Get device public BT Address. More...
|
| |
| at_ble_status_t | at_ble_addr_set (at_ble_addr_t *address) |
| | Set the local device BT Address. More...
|
| |
| at_ble_status_t | at_ble_adv_data_set (uint8_t const *const adv_data, uint8_t adv_data_len, uint8_t const *const scan_resp_data, uint8_t scan_response_data_len) |
| | Set, clear or update advertisement and scan response data. More...
|
| |
| at_ble_status_t | at_ble_adv_set_tx_power (int8_t power) |
| | Set the Advertising transmission power. More...
|
| |
| at_ble_status_t | at_ble_adv_start (at_ble_adv_type_t type, at_ble_adv_mode_t mode, at_ble_addr_t *peer_addr, at_ble_filter_type_t filtered, uint16_t interval, uint16_t timeout, bool disable_randomness) |
| | Start advertising (GAP Discoverable, Connectable modes, Broadcast Procedure). More...
|
| |
| at_ble_status_t | at_ble_adv_stop (void) |
| | Stop advertising (GAP Discoverable, Connectable modes, Broadcast Procedure). More...
|
| |
| at_ble_status_t | at_ble_authenticate (at_ble_handle_t conn_handle, at_ble_pair_features_t *features, at_ble_LTK_t *ltk, at_ble_CSRK_t *csrk) |
| | Starts Pairing procedure for a given connection. More...
|
| |
| at_ble_status_t | at_ble_characteristic_discover_all (at_ble_handle_t conn_handle, at_ble_handle_t start_handle, at_ble_handle_t end_handle) |
| | Discover all Characteristics declared in a connected device. More...
|
| |
| at_ble_status_t | at_ble_characteristic_discover_by_uuid (at_ble_handle_t conn_handle, at_ble_handle_t start_handle, at_ble_handle_t end_handle, at_ble_uuid_t *uuid) |
| | Discover all Characteristics of a given UUID declared in a connected device. More...
|
| |
| at_ble_status_t | at_ble_characteristic_read (at_ble_handle_t conn_handle, at_ble_handle_t char_handle, uint16_t offset, uint16_t length) |
| | Read a characteristic given its handle. More...
|
| |
| at_ble_status_t | at_ble_characteristic_read_by_uuid (at_ble_handle_t conn_handle, at_ble_handle_t start_handle, at_ble_handle_t end_handle, at_ble_uuid_t *uuid) |
| | Read a characteristic given its UUID. More...
|
| |
| at_ble_status_t | at_ble_characteristic_read_multible (at_ble_handle_t conn_handle, at_ble_handle_t *char_handle_list, uint16_t *char_val_length, uint8_t char_handle_count) |
| | Read a list of characteristics given their handles. More...
|
| |
| at_ble_status_t | at_ble_characteristic_reliable_write_cancel (at_ble_handle_t conn_handle) |
| | Cancels a pending prepared write operation. More...
|
| |
| at_ble_status_t | at_ble_characteristic_reliable_write_execute (at_ble_handle_t conn_handle) |
| | Executes a pending prepared write operation. More...
|
| |
| at_ble_status_t | at_ble_characteristic_reliable_write_prepare (at_ble_handle_t conn_handle, at_ble_handle_t char_handle, uint16_t offset, uint16_t length, uint8_t *data) |
| | Add a new prepared write request. More...
|
| |
| at_ble_status_t | at_ble_characteristic_value_get (at_ble_handle_t handle, uint8_t *value, uint16_t *actual_read_len) |
| | Reads a characteristic value. More...
|
| |
| at_ble_status_t | at_ble_characteristic_value_set (at_ble_handle_t handle, uint8_t *value, uint16_t len) |
| | Sets a characteristic value. More...
|
| |
| at_ble_status_t | at_ble_characteristic_write (at_ble_handle_t conn_handle, at_ble_handle_t char_handle, uint16_t offset, uint16_t length, uint8_t *data, bool signed_write, bool with_response) |
| | Write a characteristic. More...
|
| |
| void | at_ble_conn_update_reply (at_ble_handle_t conn_handle, at_ble_connection_params_t *connection_params) |
| | Reply to connection parameters update request AT_BLE_CONN_PARAM_UPDATE_REQUEST. More...
|
| |
| at_ble_status_t | at_ble_connect (at_ble_addr_t peers[], uint8_t peer_count, uint16_t scan_interval, uint16_t scan_window, at_ble_connection_params_t *connection_params) |
| | Connect to a peer device. More...
|
| |
| at_ble_status_t | at_ble_connect_cancel (void) |
| | Cancels an ongoing connection attempt. More...
|
| |
| at_ble_status_t | at_ble_connection_param_update (at_ble_handle_t handle, at_ble_connection_params_t *connection_params) |
| | Update the connection parameters of an ongoing connection. More...
|
| |
| at_ble_status_t | at_ble_descriptor_discover_all (at_ble_handle_t conn_handle, at_ble_handle_t start_handle, at_ble_handle_t end_handle) |
| | Discover all Descriptors declared in a connected device. More...
|
| |
| at_ble_status_t | at_ble_device_name_set (uint8_t *dev_name, uint8_t len) |
| | Set device name. More...
|
| |
| at_ble_status_t | at_ble_disconnect (at_ble_handle_t handle, at_ble_disconnect_reason_t reason) |
| | Disconnect a connected peer device. More...
|
| |
| at_ble_status_t | at_ble_encryption_request_reply (at_ble_handle_t conn_handle, at_ble_auth_t auth, bool key_found, at_ble_LTK_t *key) |
| | Responds to encryption start request from master device AT_BLE_ENCRYPTION_REQUEST , once encryption starts AT_BLE_ENCRYPTION_STATUS_CHANGED event is delivered. More...
|
| |
| at_ble_status_t | at_ble_encryption_start (at_ble_handle_t conn_handle, at_ble_LTK_t *key, at_ble_auth_t auth) |
| | Starts encryption, once encryption starts AT_BLE_ENCRYPTION_STATUS_CHANGED event is delivered. More...
|
| |
| at_ble_status_t | at_ble_event_get (at_ble_events_t *event, void *params, uint32_t timeout) |
| | extracts the next event form the event queue More...
|
| |
| at_ble_status_t | at_ble_event_user_defined_post (void *params) |
| | Posts a user defined custom event into the event queue, allowing the user code to process other events in the same event handling loop. More...
|
| |
| at_ble_status_t | at_ble_exchange_mtu (at_ble_handle_t conn_handle) |
| | This message is used by the application to initiate the MTU exchange. More...
|
| |
| at_ble_status_t | at_ble_gap_get_param (at_ble_parameters_t param, uint8_t *value_buff, uint16_t value_len) |
| | Fetch a GAP Parameter value. More...
|
| |
| at_ble_status_t | at_ble_gap_set_param (at_ble_parameters_t param, uint8_t *value_buff, uint16_t value_len) |
| | Change the GAP related parameters. More...
|
| |
| at_ble_status_t | at_ble_included_service_discover_all (at_ble_handle_t conn_handle, at_ble_handle_t start_handle, at_ble_handle_t end_handle) |
| | Discover all included services declared in a connected device. More...
|
| |
| at_ble_status_t | at_ble_indication_send (at_ble_handle_t conn_handle, at_ble_handle_t attr_handle) |
| | Sends an Indication. More...
|
| |
| at_ble_status_t | at_ble_init (void *args) |
| | Reset the link layer and the host. More...
|
| |
| at_ble_status_t | at_ble_l2cap_cid_register (at_ble_handle_t conn_handle, uint16_t cid) |
| | Registers a custom CID to received data from, when the L2CAP received data on the registered CID an AT_BLE_L2CAP_RX event will be reported. More...
|
| |
| at_ble_status_t | at_ble_l2cap_cid_unregister (at_ble_handle_t conn_handle, uint16_t cid) |
| | Unregister a previously registered custom CID. More...
|
| |
| at_ble_status_t | at_ble_l2cap_tx (at_ble_handle_t conn_handle, uint16_t cid, uint8_t *data, uint16_t len) |
| | Sends a custom L2CAP message using the given CID. More...
|
| |
| int8_t | at_ble_max_PA_gain_get (at_ble_handle_t conn_handle) |
| | Gets maximum allowed TX gain of a given connection. More...
|
| |
| at_ble_status_t | at_ble_notification_send (at_ble_handle_t conn_handle, at_ble_handle_t attr_handle) |
| | Sends a Notification. More...
|
| |
| at_ble_status_t | at_ble_pair_key_reply (at_ble_handle_t conn_handle, at_ble_pair_key_type_t type, uint8_t *key) |
| | Provides a passkey or OOB data that was requested via AT_BLE_PAIR_KEY_REQUEST event, If key type is AT_BLE_PAIR_PASSKEY, then a 6-byte ASCII string (digit 0..9 only). More...
|
| |
| at_ble_status_t | at_ble_primary_service_define (at_ble_uuid_t *uuid, at_ble_handle_t *service_handle, at_ble_included_service_t *included_service_list, uint16_t included_service_count, at_ble_characteristic_t *characteristic_list, uint16_t characteristic_count) |
| | Defines a new Primary service along with its included services and characteristics. More...
|
| |
| at_ble_status_t | at_ble_primary_service_discover_all (at_ble_handle_t conn_handle, at_ble_handle_t start_handle, at_ble_handle_t end_handle) |
| | Discover all Primary services declared in a connected device. More...
|
| |
| at_ble_status_t | at_ble_primary_service_discover_by_uuid (at_ble_handle_t conn_handle, at_ble_handle_t start_handle, at_ble_handle_t end_handle, at_ble_uuid_t *uuid) |
| | Discover all Primary services of a given UUID declared in a connected device. More...
|
| |
| at_ble_status_t | at_ble_random_address_resolve (uint8_t nb_key, at_ble_addr_t *rand_addr, uint8_t *irk_key) |
| | Handles request of resolving a resolvable random address ,AT_BLE_RESOLV_RAND_ADDR_STATUS event is used to inform which key has been used to perform resolution. More...
|
| |
| at_ble_status_t | at_ble_read_authorize_reply (at_ble_handle_t conn_handle, at_ble_handle_t attr_handle, bool grant_authorization, bool update_value, uint8_t *value, uint16_t offset, uint16_t len) |
| | Replies to a read authorization request requested by by AT_BLE_READ_AUTHORIZE_REQUEST event. More...
|
| |
| int8_t | at_ble_rx_power_get (at_ble_handle_t conn_handle) |
| | Gets RX power of a given connection. More...
|
| |
| at_ble_status_t | at_ble_rx_power_subscribe (at_ble_handle_t conn_handle, uint16_t range_max, uint16_t range_min) |
| | Subscribes for RX power level notifications. More...
|
| |
| at_ble_status_t | at_ble_rx_power_unsubscribe (at_ble_handle_t conn_handle) |
| | Unsubscribe form RX power level notifications. More...
|
| |
| at_ble_status_t | at_ble_scan_start (uint16_t interval, uint16_t window, uint16_t timeout, at_ble_scan_type_t type, at_ble_scan_mode_t mode, bool filter_whitelist, bool filter_duplicates) |
| | Start scan operation. More...
|
| |
| at_ble_status_t | at_ble_scan_stop (void) |
| | Stops an ongoing scan operation. More...
|
| |
| at_ble_status_t | at_ble_sec_info_set (at_ble_handle_t handle, at_ble_signature_info_t signature_info, at_ble_auth_t authen, at_ble_author_t author) |
| | Set specific link security configuration and bonding data. More...
|
| |
| at_ble_status_t | at_ble_secondary_service_define (at_ble_uuid_t *uuid, at_ble_handle_t *service_handle, at_ble_included_service_t *included_service_list, uint16_t included_service_count, at_ble_characteristic_t *characteristic_list, uint16_t characteristic_count) |
| | Defines a new Secondary service along with its included services and characteristics. More...
|
| |
| at_ble_status_t | at_ble_send_slave_sec_request (at_ble_handle_t conn_handle, bool mitm_protection, bool bond) |
| | Send slave security request to master. More...
|
| |
| at_ble_status_t | at_ble_service_changed_notification_send (at_ble_handle_t conn_handle, at_ble_handle_t start_handle, at_ble_handle_t end_handle) |
| | Sends a Service changed Notification. More...
|
| |
| at_ble_status_t | at_ble_set_dev_config (at_ble_gap_role role) |
| | Set GAP attribute data base into BLE chip. More...
|
| |
| at_ble_status_t | at_ble_set_gap_deviceinfo (at_ble_gap_deviceinfo_t *gap_deviceinfo) |
| | Set GAP attribute data base in BLE API (Appearance , slave preferred connection parameters , device name write permissions) More...
|
| |
| at_ble_status_t | at_ble_set_privacy_key (at_ble_gap_irk_t *irk, uint16_t interval) |
| | Set device Identity Resolving Key. More...
|
| |
| int8_t | at_ble_tx_power_get (at_ble_handle_t conn_handle) |
| | Gets TX power of a given connection. More...
|
| |
| at_ble_status_t | at_ble_tx_power_set (at_ble_handle_t conn_handle, int8_t powerdBm) |
| | Sets TX gain, relative to maximum gain, for a given connection. More...
|
| |
| at_ble_status_t | at_ble_whitelist_add (at_ble_addr_t *address) |
| | Adds a peer device address to the white-list. More...
|
| |
| at_ble_status_t | at_ble_whitelist_clear (void) |
| | Clear the white-list. More...
|
| |
| at_ble_status_t | at_ble_whitelist_remove (at_ble_addr_t *address) |
| | Removes a peer device address from the white-list. More...
|
| |
| at_ble_status_t | at_ble_write_authorize_reply (at_ble_handle_t conn_handle, at_ble_handle_t attr_handle, bool grant_authorization) |
| | Replies to a write authorization request requested by by AT_BLE_WRITE_AUTHORIZE_REQUEST event. More...
|
| |
1.8.5