  app_config.h | These are application-specific resources which are used in the test harness application in addition to the underlaying stack |
| at86rf233.h | File contains register and command defines specific for AT86RF231 |
| avr2025_mac.h | Copyright (c) 2014-2018 Microchip Technology Inc |
| bmm.c | This file implements the functions for initializing buffer module, allocating and freeing up buffers |
| bmm.h | This file contains the Buffer Management Module definitions |
| board.h | Standard board header file |
| board_init.c | SAM D21 Xplained Pro board initialization |
| clock.c | SAM D21/R21/DA/HA Clock Driver |
| clock.h | SAM Clock Driver |
| clock_config_check.h | SAM D21/R21/DA/HA Clock Driver |
| clock_feature.h | SAM Clock Driver |
| common_hw_timer.h | Copyright (c) 2014-2018 Microchip Technology Inc |
| common_sw_timer.c | Copyright (c) 2013-2018 Microchip Technology Inc |
| common_sw_timer.h | Copyright (c) 2013-2018 Microchip Technology Inc |
| compiler.h | Commonly used includes, types and macros |
| conf_board.h | Board configuration |
| conf_clocks.h | SAM D21 Clock configuration |
| conf_common_sw_timer.h | USART Serial configuration |
| conf_extint.h | SAM D21 External Interrupt Driver Configuration Header |
| conf_hw_timer.h | HW Timer Configuration |
| conf_sio2host.h | Serial Input & Output configuration |
| conf_sleepmgr.h | Sleep manager configuration |
| conf_spi.h | SAM D21 SPI configuration |
| conf_trx_access.h | Common TRX Access Configuration |
| delay.h | Common Delay Service |
| extint.c | SAM External Interrupt Driver |
| extint.h | SAM External Interrupt Driver |
| extint_callback.c | SAM External Interrupt Driver |
| extint_callback.h | SAM External Interrupt Driver |
| gclk.c | SAM D21/R21/DA/HA Generic Clock Driver |
| gclk.h | SAM Generic Clock Driver |
| hw_timer.c | Copyright (c) 2013-2020 Microchip Technology Inc |
| hw_timer.h | Copyright (c) 2014-2018 Microchip Technology Inc |
| ieee_154g.h | This header holds all IEEE 802.15.4g-2012 constants and attribute identifiers |
| ieee_const.h | This header holds all IEEE 802.15.4-2006 constants and attribute identifiers |
| interrupt.h | Global interrupt management for 8- and 32-bit AVR |
| interrupt_sam_nvic.c | Global interrupt management for SAM D20, SAM3 and SAM4 (NVIC based) |
| interrupt_sam_nvic.h | Global interrupt management for SAM D20, SAM3 and SAM4 (NVIC based) |
| io.h | Arch file for SAM0 |
| mac.c | This module runs the MAC scheduler |
| mac.h | Provides MAC API to access MAC Layer functionality |
| mac_api.c | This file contains MAC API functions |
| mac_api.h | MAC API for IEEE 802.15.4-2006 |
| mac_associate.c | Implements the functionality required for Association |
| mac_beacon.c | Implements the building of beacon frames and initiates transmission via CSMA-CA after reception of a beacon request frame in a nonbeacon-enabled PAN |
| mac_build_config.h | This header file declares macros for various build configurations |
| mac_callback_wrapper.c | Wrapper code for MAC callback functions |
| mac_config.h | These are all timer IDs which are used in MAC |
| mac_data_extract_mhr.c | Implements common functionality for MAC |
| mac_data_ind.c | Implements incoming frame handling in the MAC |
| mac_data_req.c | Implements data request related functions |
| mac_data_structures.h | This file contains MAC related data structures, types and enums |
| mac_disassociate.c | Implements the MLME-DISASSOCIATION functionality |
| mac_dispatcher.c | Dispatches the events by decoding the message type |
| mac_gts.c | This file implements GTS feature for MAC |
| mac_internal.h | Declares MAC internal functions, globals, and macros |
| mac_mcps_data.c | Handles MCPS related primitives and frames |
| mac_misc.c | This file implements miscellaneous MAC sublayer components |
| mac_msg_const.h | This file defines all message constants |
| mac_msg_type_data_ind.h | This file defines all message structures for the MAC |
| mac_msg_types.h | This file defines all message structures for the MAC |
| mac_orphan.c | Implements orphan scan related functionalities on the parent side |
| mac_pib.c | Implements the MAC PIB attribute handling |
| mac_poll.c | Implements the MLME-POLL.request handling |
| mac_process_beacon_frame.c | Implements the processing of a received beacon frame |
| mac_process_tal_tx_frame_status.c | Processes the TAL tx frame status received on the frame transmission |
| mac_rx_enable.c | Implements the MLME-RX-ENABLE functionality |
| mac_scan.c | |
| mac_security.c | Handles MAC security |
| mac_security.h | Declares MAC security related functions, globals, and macros |
| mac_start.c | This file implements the MLME-START.request (MAC layer management entity) entry points |
| mac_sync.c | Implements the MLME-SYNC.request |
| mac_tx_coord_realignment_command.c | Implements the coordinator realignment command |
| main.c | MAC Serial Interface Application |
| mrecursion.h | Preprocessor macro recursion utils |
| mrepeat.h | Preprocessor macro repeating utils |
| pal.c | |
| pal.h | PAL related APIs |
| pal_generic.h | PAL Generic APIs |
| parts.h | Atmel part identification macros |
| pinmux.c | SAM Pin Multiplexer Driver |
| pinmux.h | SAM Pin Multiplexer Driver |
| port.c | SAM GPIO Port Driver |
| port.h | SAM GPIO Port Driver |
| power.h | SAM Power related functionality |
| preprocessor.h | Preprocessor utils |
| private_const.h | This header holds all Atmel private constants and attribute identifiers |
| qmm.c | This file implements the functions for initializing the queues, appending a buffer into the queue, removing a buffer from the queue and reading a buffer from the queue as per the search criteria |
| qmm.h | This file contains the Queue Management Module definitions |
| qs_lin.h | SAM USART LIN Quick Start |
| qs_pinmux_basic.h | SAM PINMUX Driver Quick Start |
| qs_port_basic.h | SAM GPIO Port Driver Quick Start |
| qs_spi_dma_use.h | SAM D21/R21/L21/L22/DA1/C21/R30 Quick Start Guide for Using SPI driver with DMA |
| qs_spi_master_basic.h | SAM SPI Quick Start |
| qs_spi_slave_basic.h | SAM SPI Quick Start |
| qs_usart_basic_use.h | SAM USART Quick Start |
| qs_usart_callback.h | SAM USART Quick Start |
| qs_usart_dma_use.h | SAM Quick Start Guide for Using Usart driver with DMA |
| read.c | System-specific implementation of the _read function used by the standard library |
| reset.h | SAM Reset related functionality |
| return_val.h | Return values of APIs |
| sal.c | Low-level crypto API for an AES unit implemented in AT86RF2xx |
| sal.h | Declarations for low-level security API |
| sal_generic.h | Declarations for low-level security API |
| sal_types.h | This file contains defines for SAL types |
| samd21_xplained_pro.h | SAM D21 Xplained Pro board definition |
| sercom.c | SAM Serial Peripheral Interface Driver |
| sercom.h | SAM Serial Peripheral Interface Driver |
| sercom_interrupt.c | SAM Serial Peripheral Interface Driver |
| sercom_interrupt.h | SAM Serial Peripheral Interface Driver |
| sercom_pinout.h | SAM SERCOM Module Pinout Definitions |
| serial.h | Serial Mode management |
| serial_interface.c | Handles Serial Interface Functionalities |
| serial_interface.h | This header defines prototypes and definitions for serial interface functionalities |
| sio2host.c | Handles Serial I/O Functionalities For the Host Device |
| sio2host.h | Event handling Serial I/O Functionalities |
| spi.c | SAM Serial Peripheral Interface Driver |
| spi.h | SAM Serial Peripheral Interface Driver |
| stack_config.h | Stack configuration parameters |
| status_codes.h | Status code definitions |
| stb.c | High-level security tool box |
| stb.h | Declarations for security tool box |
| stb_armcrypto.c | |
| stb_armcrypto.h | Declarations for security tool box required for ARM crypto engine |
| stb_generic.h | Declarations for security tool box |
| stb_help.c | |
| stb_internal.h | Declarations for security tool box |
| stdio_serial.h | Common Standard I/O Serial Management |
| stringz.h | Preprocessor stringizing utils |
| system.c | SAM System related functionality |
| system.h | SAM System related functionality |
| system_interrupt.c | SAM System Interrupt Driver |
| system_interrupt.h | SAM System Interrupt Driver |
| system_interrupt_features.h | SAM D21 System Interrupt Driver |
| systick_counter.c | ARM functions for busy-wait delay loops |
| systick_counter.h | ARM functions for busy-wait delay loops |
| tal.c | This file implements the TAL state machine and provides general functionality used by the TAL |
| tal.h | This file contains TAL API function declarations |
| tal_build_config.h | This file contains TAL API function declarations |
| tal_config.h | File contains TAL configuration parameters |
| tal_constants.h | This file contains constants used througthout the TAL |
| tal_ed.c | This file implements ED Scan |
| tal_generic.h | This file contains defines for TAL types |
| tal_helper.c | |
| tal_helper.h | This file contains TAL helper function declarations |
| tal_init.c | This file implements functions for initializing TAL |
| tal_internal.h | This header file contains types and variable definition that are used within the TAL only |
| tal_irq_handler.c | This file handles the interrupts generated by the transceiver |
| tal_irq_handler.h | This header file contains the interrupt handling definitions |
| tal_pib.c | This file handles the TAL PIB attributes, set/get and initialization |
| tal_pib.h | This file contains the prototypes for TAL PIB functions |
| tal_pwr_mgmt.c | This file implements TAL power management functionality of the transceiver |
| tal_rx.c | This file implements the frame reception functions |
| tal_rx.h | File contains macros and modules used while processing a received frame |
| tal_rx_enable.c | File provides functionality supporting RX-Enable feature |
| tal_slotted_csma.c | This file implements slotted CSMA-CA functions |
| tal_slotted_csma.h | File provides CSMA-CA states |
| tal_timer_config.h | File contains TAL timer configuration parameters |
| tal_tx.c | This file handles the frame transmission within the TAL |
| tal_tx.h | File contains the TAL sub-state macros and functions that perform frame transmission |
| tal_types.h | This file contains defines for TAL types |
| tc.c | SAM TC - Timer Counter Driver |
| tc.h | SAM TC - Timer Counter Driver |
| tc_interrupt.c | SAM TC - Timer Counter Callback Driver |
| tc_interrupt.h | SAM TC - Timer Counter Callback Driver |
| tpaste.h | Preprocessor token pasting utils |
| trx_access.c | |
| trx_access.h | HAL related APIs for externally plugged transceivers |
| usart.c | SAM SERCOM USART Driver |
| usart.h | SAM SERCOM USART Driver |
| usart_interrupt.c | SAM SERCOM USART Asynchronous Driver |
| usart_interrupt.h | SAM SERCOM USART Asynchronous Driver |
| usart_serial.h | USART Serial wrapper service for the SAM D/L/C/R devices |
 write.c | System-specific implementation of the _write function used by the standard library |
1.8.5