tal_pib.h File Reference

This file contains the defines for initial TAL PIB attribute values.

Copyright (c) 2015-2018 Microchip Technology Inc. and its subsidiaries.

#include "ieee_154g.h"

Macros
#define	FSK_DEF   2
#define	LEG_OQPSK_DEF   4
#define	OFDM_DEF   1
	Defines used to select the default configuration. More...
#define	OQPSK_DEF   3
#define	TAL_PANID_BC_DEF   (0xFFFF)
	Value of a broadcast PAN ID. More...
#define	TAL_RF09_ADAPT_DATA_RATE_FOR_ACK   true
	Default value of adapt data rate of the incoming frame for ACK transmission. More...
#define	TAL_RF09_FCS_TYPE_DEFAULT   FCS_TYPE_4_OCTETS
	FCS type default value. More...
#define	TAL_RF09_FRAME_VERSIONS   ((1 << FCF1_FV_2003) | (1 << FCF1_FV_2006))
#define	TAL_RF09_FRAMES_TYPES
	Default value of frame filter settings. More...
#define	TAL_RF09_FSK_CH_SPACING_DEF   FSK_915_MOD1_CH_SPAC
	Default value of FSK default channel spacing. More...
#define	TAL_RF09_FSK_CURRENT_CHANNEL_DEF   (0x00)
	Default value of FSK current channel in TAL. More...
#define	TAL_RF09_FSK_DATA_RATE_DEF   FSK_DATA_RATE_50
	Default value for FSK data rate. More...
#define	TAL_RF09_FSK_FEC_ENABLE   false
	Default values for FSK. More...
#define	TAL_RF09_FSK_FEC_INTERLEAVING_RSC   false
#define	TAL_RF09_FSK_FEC_SCHEME   FEC_SCHEME_NRNSC
#define	TAL_RF09_FSK_FRQ_BAND_DEF   US_915
	Default value of FSK PHY / frequency band. More...
#define	TAL_RF09_FSK_FRQ_F0_DEF   FSK_915_MOD1_F0
	Default value of FSK default frequency F0. More...
#define	TAL_RF09_FSK_MOD_IDX_DEF   MOD_IDX_1_0
	Default value for FSK modulation index. More...
#define	TAL_RF09_FSK_OP_DEF   FSK_OP_MOD_1
	Default value for FSK operation mode. More...
#define	TAL_RF09_FSK_PREAMBLE_LEN   8
#define	TAL_RF09_FSK_RAW_MODE_ENABLED   false
	Default values for FSK raw mode. More...
#define	TAL_RF09_FSK_RAW_MODE_RX_LENGTH   250
#define	TAL_RF09_FSK_SCRAMBLE_PSDU   true
#define	TAL_RF09_FSK_SFD   0
#define	TAL_RF09_FSK_TYPE_DEF   F2FSK
	Default value for FSK modulation type. More...
#define	TAL_RF09_LEG_OQPSK_CH_SPACING_DEF   LEG_915_CH_SPAC
	Default value of LEG OQPSK default channel spacing. More...
#define	TAL_RF09_LEG_OQPSK_CURRENT_CHANNEL_DEF   (0x01)
	Default value of LEG OQPSK current channel in TAL. More...
#define	TAL_RF09_LEG_OQPSK_FRQ_BAND_DEF   US_915
	Default value of LEG OQPSK PHY / frequency band. More...
#define	TAL_RF09_LEG_OQPSK_FRQ_F0_DEF
	Default value of LEG OQPSK default frequency F0. More...
#define	TAL_RF09_LEG_OQPSK_RATE   CHIP_RATE_1000
	Default value for LEG OQPSK rate mode. More...
#define	TAL_RF09_MAX_CSMA_BACKOFFS_DEF   (0x04)
	Default value of maximum CSMA backoffs. More...
#define	TAL_RF09_MAX_FRAMES_DURING_BACKOFF_DEF   (0x05)
	Default value of the maximum number of frames that are allowed to be received during CSMA backoff periods for a tx transaction. More...
#define	TAL_RF09_MAXBE_DEF   (0x08)
	Default value of maximum backoff exponent used while performing CSMA. More...
#define	TAL_RF09_MAXFRAMERETRIES_DEF   (0x03)
	Default value of PIB attribute macMaxFrameRetries. More...
#define	TAL_RF09_MINBE_DEF   (0x05)
	Default value of minimum backoff exponent used while performing CSMA. More...
#define	TAL_RF09_MODE_SWITCH_DURATION   10000
#define	TAL_RF09_MODE_SWITCH_ENABLE   false
	Default values for Mode Switch. More...
#define	TAL_RF09_MODE_SWITCH_SETTLING_DELAY   100
#define	TAL_RF09_MODULATION_DEF   OFDM_DEF
	Default value of PHY / modulation The define DEFAULT_PHY can be set by the Makefile. More...
#define	TAL_RF09_NEW_MODE_FEC_ENABLED   false
#define	TAL_RF09_NEW_MODE_MODULATION   OFDM
#define	TAL_RF09_NEW_MODE_OPTION   OFDM_OPT_2
#define	TAL_RF09_NEW_MODE_RATE   MCS5
#define	TAL_RF09_OFDM_CH_SPACING_DEF   OFDM_915_OPT1_CH_SPAC
	Default value of OFDM default channel spacing. More...
#define	TAL_RF09_OFDM_CURRENT_CHANNEL_DEF   (0x00)
	Default value of OFDM current channel in TAL. More...
#define	TAL_RF09_OFDM_FRQ_BAND_DEF   US_915
	Default value of OFDM PHY / frequency band. More...
#define	TAL_RF09_OFDM_FRQ_F0_DEF   OFDM_915_OPT1_F0
	Default value of OFDM default frequency F0. More...
#define	TAL_RF09_OFDM_INTERL_DEF   false
	Default value of PHY / OFMD interleaving enable value. More...
#define	TAL_RF09_OFDM_MCS_VAL_DEF   MCS3
	Default value of PHY / OFMD MCS value. More...
#define	TAL_RF09_OFDM_OPT_DEF   OFDM_OPT_1
	Default value of PHY / OFDM option. More...
#define	TAL_RF09_OQPSK_CH_SPACING_DEF   OQPSK_915_CH_SPAC
	Default value of OQPSK default channel spacing. More...
#define	TAL_RF09_OQPSK_CURRENT_CHANNEL_DEF   (0x00)
	Default value of OQPSK current channel in TAL. More...
#define	TAL_RF09_OQPSK_FRQ_BAND_DEF   US_915
	Default value of OQPSK PHY / frequency band. More...
#define	TAL_RF09_OQPSK_FRQ_F0_DEF   OQPSK_915_F0
	Default value of OQPSK default frequency F0. More...
#define	TAL_RF09_OQPSK_RATE   OQPSK_RATE_MOD_0
	Default value for OQPSK rate mode. More...
#define	TAL_RF09_PAN_COORDINATOR_DEF   (false)
	Default value of PAN Coordinator custom TAL PIB. More...
#define	TAL_RF09_RPC_DEF   false
	Default values for reduced power consumption setting. More...
#define	TAL_RF24_ADAPT_DATA_RATE_FOR_ACK   true
#define	TAL_RF24_FCS_TYPE_DEFAULT   FCS_TYPE_4_OCTETS
#define	TAL_RF24_FRAME_VERSIONS   ((1 << FCF1_FV_2003) | (1 << FCF1_FV_2006))
#define	TAL_RF24_FRAMES_TYPES
#define	TAL_RF24_FSK_CH_SPACING_DEF   FSK_2450_MOD1_CH_SPAC
#define	TAL_RF24_FSK_CURRENT_CHANNEL_DEF   (0x00)
#define	TAL_RF24_FSK_DATA_RATE_DEF   FSK_DATA_RATE_50
#define	TAL_RF24_FSK_FEC_ENABLE   false
#define	TAL_RF24_FSK_FEC_INTERLEAVING_RSC   false
#define	TAL_RF24_FSK_FEC_SCHEME   FEC_SCHEME_NRNSC
#define	TAL_RF24_FSK_FRQ_BAND_DEF   WORLD_2450
#define	TAL_RF24_FSK_FRQ_F0_DEF   FSK_2450_MOD1_F0
#define	TAL_RF24_FSK_MOD_IDX_DEF   MOD_IDX_1_0
#define	TAL_RF24_FSK_OP_DEF   FSK_OP_MOD_1
#define	TAL_RF24_FSK_PREAMBLE_LEN   8
#define	TAL_RF24_FSK_RAW_MODE_ENABLED   false
#define	TAL_RF24_FSK_RAW_MODE_RX_LENGTH   250
#define	TAL_RF24_FSK_SCRAMBLE_PSDU   true
#define	TAL_RF24_FSK_SFD   0
#define	TAL_RF24_FSK_TYPE_DEF   F2FSK
#define	TAL_RF24_LEG_OQPSK_CH_SPACING_DEF   LEG_2450_CH_SPAC
#define	TAL_RF24_LEG_OQPSK_CURRENT_CHANNEL_DEF   (0x0B)
#define	TAL_RF24_LEG_OQPSK_FRQ_BAND_DEF   WORLD_2450
#define	TAL_RF24_LEG_OQPSK_FRQ_F0_DEF
#define	TAL_RF24_LEG_OQPSK_RATE   CHIP_RATE_2000
#define	TAL_RF24_MAX_CSMA_BACKOFFS_DEF   (0x04)
#define	TAL_RF24_MAX_FRAMES_DURING_BACKOFF_DEF   (0x05)
#define	TAL_RF24_MAXBE_DEF   (0x08)
#define	TAL_RF24_MAXFRAMERETRIES_DEF   (0x03)
#define	TAL_RF24_MINBE_DEF   (0x05)
#define	TAL_RF24_MODE_SWITCH_DURATION   10000
#define	TAL_RF24_MODE_SWITCH_ENABLE   false
#define	TAL_RF24_MODE_SWITCH_SETTLING_DELAY   100
#define	TAL_RF24_MODULATION_DEF   OFDM_DEF
#define	TAL_RF24_NEW_MODE_FEC_ENABLED   false
#define	TAL_RF24_NEW_MODE_MODULATION   OFDM
#define	TAL_RF24_NEW_MODE_OPTION   OFDM_OPT_2
#define	TAL_RF24_NEW_MODE_RATE   MCS5
#define	TAL_RF24_OFDM_CH_SPACING_DEF   OFDM_2450_OPT1_CH_SPAC
#define	TAL_RF24_OFDM_CURRENT_CHANNEL_DEF   (0x00)
#define	TAL_RF24_OFDM_FRQ_BAND_DEF   WORLD_2450
#define	TAL_RF24_OFDM_FRQ_F0_DEF   OFDM_2450_OPT1_F0
#define	TAL_RF24_OFDM_INTERL_DEF   false
#define	TAL_RF24_OFDM_MCS_VAL_DEF   MCS3
#define	TAL_RF24_OFDM_OPT_DEF   OFDM_OPT_1
#define	TAL_RF24_OQPSK_CH_SPACING_DEF   OQPSK_2450_CH_SPAC
#define	TAL_RF24_OQPSK_CURRENT_CHANNEL_DEF   (0x00)
#define	TAL_RF24_OQPSK_FRQ_BAND_DEF   WORLD_2450
#define	TAL_RF24_OQPSK_FRQ_F0_DEF   OQPSK_2450_F0
#define	TAL_RF24_OQPSK_RATE   OQPSK_RATE_MOD_0
#define	TAL_RF24_PAN_COORDINATOR_DEF   (false)
#define	TAL_RF24_RPC_DEF   false
#define	TAL_SHORT_ADDRESS_DEF   (0xFFFF)
	Default value of short address. More...
#define	TAL_TRANSMIT_POWER_DEFAULT   (0x04)

#define FSK_DEF   2

#define LEG_OQPSK_DEF   4

#define OFDM_DEF   1

Defines used to select the default configuration.

#define OQPSK_DEF   3

#define TAL_PANID_BC_DEF   (0xFFFF)

Value of a broadcast PAN ID.

Referenced by init_tal_pib().

#define TAL_RF09_ADAPT_DATA_RATE_FOR_ACK   true

Default value of adapt data rate of the incoming frame for ACK transmission.

Referenced by init_tal_pib().

#define TAL_RF09_FCS_TYPE_DEFAULT   FCS_TYPE_4_OCTETS

FCS type default value.

Referenced by init_tal_pib().

#define TAL_RF09_FRAME_VERSIONS   ((1 << FCF1_FV_2003) | (1 << FCF1_FV_2006))

Referenced by init_tal_pib().

#define TAL_RF09_FRAMES_TYPES

Value:

((1 << FCF_FRAMETYPE_BEACON) | \
    (1 << FCF_FRAMETYPE_DATA) | \
    (1 << FCF_FRAMETYPE_MAC_CMD))

Default value of frame filter settings.

Referenced by init_tal_pib().

#define TAL_RF09_FSK_CH_SPACING_DEF   FSK_915_MOD1_CH_SPAC

Default value of FSK default channel spacing.

Referenced by init_tal_pib().

#define TAL_RF09_FSK_CURRENT_CHANNEL_DEF   (0x00)

Default value of FSK current channel in TAL.

Referenced by init_tal_pib().

#define TAL_RF09_FSK_DATA_RATE_DEF   FSK_DATA_RATE_50

Default value for FSK data rate.

Referenced by init_tal_pib().

#define TAL_RF09_FSK_FEC_ENABLE   false

Default values for FSK.

Referenced by init_tal_pib().

#define TAL_RF09_FSK_FEC_INTERLEAVING_RSC   false

Referenced by init_tal_pib().

#define TAL_RF09_FSK_FEC_SCHEME   FEC_SCHEME_NRNSC

Referenced by init_tal_pib().

#define TAL_RF09_FSK_FRQ_BAND_DEF   US_915

Default value of FSK PHY / frequency band.

Referenced by init_tal_pib().

#define TAL_RF09_FSK_FRQ_F0_DEF   FSK_915_MOD1_F0

Default value of FSK default frequency F0.

Referenced by init_tal_pib().

#define TAL_RF09_FSK_MOD_IDX_DEF   MOD_IDX_1_0

Default value for FSK modulation index.

Referenced by init_tal_pib().

#define TAL_RF09_FSK_OP_DEF   FSK_OP_MOD_1

Default value for FSK operation mode.

Referenced by init_tal_pib().

#define TAL_RF09_FSK_PREAMBLE_LEN   8

Referenced by init_tal_pib().

#define TAL_RF09_FSK_RAW_MODE_ENABLED   false

Default values for FSK raw mode.

Referenced by init_tal_pib().

#define TAL_RF09_FSK_RAW_MODE_RX_LENGTH   250

#define TAL_RF09_FSK_SCRAMBLE_PSDU   true

Referenced by init_tal_pib().

#define TAL_RF09_FSK_SFD   0

Referenced by init_tal_pib().

#define TAL_RF09_FSK_TYPE_DEF   F2FSK

Default value for FSK modulation type.

Referenced by init_tal_pib().

#define TAL_RF09_LEG_OQPSK_CH_SPACING_DEF   LEG_915_CH_SPAC

Default value of LEG OQPSK default channel spacing.

Referenced by init_tal_pib().

#define TAL_RF09_LEG_OQPSK_CURRENT_CHANNEL_DEF   (0x01)

Default value of LEG OQPSK current channel in TAL.

Referenced by init_tal_pib().

#define TAL_RF09_LEG_OQPSK_FRQ_BAND_DEF   US_915

Default value of LEG OQPSK PHY / frequency band.

Referenced by init_tal_pib().

#define TAL_RF09_LEG_OQPSK_FRQ_F0_DEF

Value:

(LEG_915_F0 - \
    (TAL_RF09_LEG_OQPSK_CURRENT_CHANNEL_DEF * \
	LEG_915_CH_SPAC))

Default value of LEG OQPSK default frequency F0.

Referenced by init_tal_pib().

#define TAL_RF09_LEG_OQPSK_RATE   CHIP_RATE_1000

Default value for LEG OQPSK rate mode.

Referenced by init_tal_pib().

#define TAL_RF09_MAX_CSMA_BACKOFFS_DEF   (0x04)

Default value of maximum CSMA backoffs.

Referenced by init_tal_pib().

#define TAL_RF09_MAX_FRAMES_DURING_BACKOFF_DEF   (0x05)

Default value of the maximum number of frames that are allowed to be received during CSMA backoff periods for a tx transaction.

Referenced by init_tal_pib().

#define TAL_RF09_MAXBE_DEF   (0x08)

Default value of maximum backoff exponent used while performing CSMA.

Referenced by init_tal_pib().

#define TAL_RF09_MAXFRAMERETRIES_DEF   (0x03)

Default value of PIB attribute macMaxFrameRetries.

Referenced by init_tal_pib().

#define TAL_RF09_MINBE_DEF   (0x05)

Default value of minimum backoff exponent used while performing CSMA.

Referenced by init_tal_pib().

#define TAL_RF09_MODE_SWITCH_DURATION   10000

Referenced by init_tal_pib().

#define TAL_RF09_MODE_SWITCH_ENABLE   false

Default values for Mode Switch.

Referenced by init_tal_pib().

#define TAL_RF09_MODE_SWITCH_SETTLING_DELAY   100

Referenced by init_tal_pib().

#define TAL_RF09_MODULATION_DEF   OFDM_DEF

Default value of PHY / modulation The define DEFAULT_PHY can be set by the Makefile.

#define TAL_RF09_NEW_MODE_FEC_ENABLED   false

Referenced by init_tal_pib().

#define TAL_RF09_NEW_MODE_MODULATION   OFDM

Referenced by init_tal_pib().

#define TAL_RF09_NEW_MODE_OPTION   OFDM_OPT_2

Referenced by init_tal_pib().

#define TAL_RF09_NEW_MODE_RATE   MCS5

#define TAL_RF09_OFDM_CH_SPACING_DEF   OFDM_915_OPT1_CH_SPAC

Default value of OFDM default channel spacing.

Referenced by init_tal_pib().

#define TAL_RF09_OFDM_CURRENT_CHANNEL_DEF   (0x00)

Default value of OFDM current channel in TAL.

Referenced by init_tal_pib().

#define TAL_RF09_OFDM_FRQ_BAND_DEF   US_915

Default value of OFDM PHY / frequency band.

Referenced by init_tal_pib().

#define TAL_RF09_OFDM_FRQ_F0_DEF   OFDM_915_OPT1_F0

Default value of OFDM default frequency F0.

Referenced by init_tal_pib().

#define TAL_RF09_OFDM_INTERL_DEF   false

Default value of PHY / OFMD interleaving enable value.

Referenced by init_tal_pib().

#define TAL_RF09_OFDM_MCS_VAL_DEF   MCS3

Default value of PHY / OFMD MCS value.

Referenced by init_tal_pib().

#define TAL_RF09_OFDM_OPT_DEF   OFDM_OPT_1

Default value of PHY / OFDM option.

Referenced by init_tal_pib().

#define TAL_RF09_OQPSK_CH_SPACING_DEF   OQPSK_915_CH_SPAC

Default value of OQPSK default channel spacing.

Referenced by init_tal_pib().

#define TAL_RF09_OQPSK_CURRENT_CHANNEL_DEF   (0x00)

Default value of OQPSK current channel in TAL.

Referenced by init_tal_pib().

#define TAL_RF09_OQPSK_FRQ_BAND_DEF   US_915

Default value of OQPSK PHY / frequency band.

Referenced by init_tal_pib().

#define TAL_RF09_OQPSK_FRQ_F0_DEF   OQPSK_915_F0

Default value of OQPSK default frequency F0.

Referenced by init_tal_pib().

#define TAL_RF09_OQPSK_RATE   OQPSK_RATE_MOD_0

Default value for OQPSK rate mode.

Referenced by init_tal_pib().

#define TAL_RF09_PAN_COORDINATOR_DEF   (false)

Default value of PAN Coordinator custom TAL PIB.

Referenced by init_tal_pib().

#define TAL_RF09_RPC_DEF   false

Default values for reduced power consumption setting.

Referenced by init_tal_pib().

#define TAL_RF24_ADAPT_DATA_RATE_FOR_ACK   true

Referenced by init_tal_pib().

#define TAL_RF24_FCS_TYPE_DEFAULT   FCS_TYPE_4_OCTETS

Referenced by init_tal_pib().

#define TAL_RF24_FRAME_VERSIONS   ((1 << FCF1_FV_2003) | (1 << FCF1_FV_2006))

Referenced by init_tal_pib().

#define TAL_RF24_FRAMES_TYPES

Value:

((1 << FCF_FRAMETYPE_BEACON) | \
    (1 << FCF_FRAMETYPE_DATA) | \
    (1 << FCF_FRAMETYPE_MAC_CMD))

Referenced by init_tal_pib().

#define TAL_RF24_FSK_CH_SPACING_DEF   FSK_2450_MOD1_CH_SPAC

Referenced by init_tal_pib().

#define TAL_RF24_FSK_CURRENT_CHANNEL_DEF   (0x00)

Referenced by init_tal_pib().

#define TAL_RF24_FSK_DATA_RATE_DEF   FSK_DATA_RATE_50

Referenced by init_tal_pib().

#define TAL_RF24_FSK_FEC_ENABLE   false

Referenced by init_tal_pib().

#define TAL_RF24_FSK_FEC_INTERLEAVING_RSC   false

Referenced by init_tal_pib().

#define TAL_RF24_FSK_FEC_SCHEME   FEC_SCHEME_NRNSC

Referenced by init_tal_pib().

#define TAL_RF24_FSK_FRQ_BAND_DEF   WORLD_2450

Referenced by init_tal_pib().

#define TAL_RF24_FSK_FRQ_F0_DEF   FSK_2450_MOD1_F0

Referenced by init_tal_pib().

#define TAL_RF24_FSK_MOD_IDX_DEF   MOD_IDX_1_0

Referenced by init_tal_pib().

#define TAL_RF24_FSK_OP_DEF   FSK_OP_MOD_1

Referenced by init_tal_pib().

#define TAL_RF24_FSK_PREAMBLE_LEN   8

Referenced by init_tal_pib().

#define TAL_RF24_FSK_RAW_MODE_ENABLED   false

Referenced by init_tal_pib().

#define TAL_RF24_FSK_RAW_MODE_RX_LENGTH   250

#define TAL_RF24_FSK_SCRAMBLE_PSDU   true

Referenced by init_tal_pib().

#define TAL_RF24_FSK_SFD   0

Referenced by init_tal_pib().

#define TAL_RF24_FSK_TYPE_DEF   F2FSK

Referenced by init_tal_pib().

#define TAL_RF24_LEG_OQPSK_CH_SPACING_DEF   LEG_2450_CH_SPAC

Referenced by init_tal_pib().

#define TAL_RF24_LEG_OQPSK_CURRENT_CHANNEL_DEF   (0x0B)

Referenced by init_tal_pib().

#define TAL_RF24_LEG_OQPSK_FRQ_BAND_DEF   WORLD_2450

Referenced by init_tal_pib().

#define TAL_RF24_LEG_OQPSK_FRQ_F0_DEF

Value:

(LEG_2450_F0 - \
    (TAL_RF24_LEG_OQPSK_CURRENT_CHANNEL_DEF * \
	LEG_2450_CH_SPAC))

Referenced by init_tal_pib().

#define TAL_RF24_LEG_OQPSK_RATE   CHIP_RATE_2000

Referenced by init_tal_pib().

#define TAL_RF24_MAX_CSMA_BACKOFFS_DEF   (0x04)

Referenced by init_tal_pib().

#define TAL_RF24_MAX_FRAMES_DURING_BACKOFF_DEF   (0x05)

Referenced by init_tal_pib().

#define TAL_RF24_MAXBE_DEF   (0x08)

Referenced by init_tal_pib().

#define TAL_RF24_MAXFRAMERETRIES_DEF   (0x03)

Referenced by init_tal_pib().

#define TAL_RF24_MINBE_DEF   (0x05)

Referenced by init_tal_pib().

#define TAL_RF24_MODE_SWITCH_DURATION   10000

Referenced by init_tal_pib().

#define TAL_RF24_MODE_SWITCH_ENABLE   false

Referenced by init_tal_pib().

#define TAL_RF24_MODE_SWITCH_SETTLING_DELAY   100

Referenced by init_tal_pib().

#define TAL_RF24_MODULATION_DEF   OFDM_DEF

#define TAL_RF24_NEW_MODE_FEC_ENABLED   false

Referenced by init_tal_pib().

#define TAL_RF24_NEW_MODE_MODULATION   OFDM

Referenced by init_tal_pib().

#define TAL_RF24_NEW_MODE_OPTION   OFDM_OPT_2

Referenced by init_tal_pib().

#define TAL_RF24_NEW_MODE_RATE   MCS5

#define TAL_RF24_OFDM_CH_SPACING_DEF   OFDM_2450_OPT1_CH_SPAC

Referenced by init_tal_pib().

#define TAL_RF24_OFDM_CURRENT_CHANNEL_DEF   (0x00)

Referenced by init_tal_pib().

#define TAL_RF24_OFDM_FRQ_BAND_DEF   WORLD_2450

Referenced by init_tal_pib().

#define TAL_RF24_OFDM_FRQ_F0_DEF   OFDM_2450_OPT1_F0

Referenced by init_tal_pib().

#define TAL_RF24_OFDM_INTERL_DEF   false

Referenced by init_tal_pib().

#define TAL_RF24_OFDM_MCS_VAL_DEF   MCS3

Referenced by init_tal_pib().

#define TAL_RF24_OFDM_OPT_DEF   OFDM_OPT_1

Referenced by init_tal_pib().

#define TAL_RF24_OQPSK_CH_SPACING_DEF   OQPSK_2450_CH_SPAC

Referenced by init_tal_pib().

#define TAL_RF24_OQPSK_CURRENT_CHANNEL_DEF   (0x00)

Referenced by init_tal_pib().

#define TAL_RF24_OQPSK_FRQ_BAND_DEF   WORLD_2450

Referenced by init_tal_pib().

#define TAL_RF24_OQPSK_FRQ_F0_DEF   OQPSK_2450_F0

Referenced by init_tal_pib().

#define TAL_RF24_OQPSK_RATE   OQPSK_RATE_MOD_0

Referenced by init_tal_pib().

#define TAL_RF24_PAN_COORDINATOR_DEF   (false)

Referenced by init_tal_pib().

#define TAL_RF24_RPC_DEF   false

Referenced by init_tal_pib().

#define TAL_SHORT_ADDRESS_DEF   (0xFFFF)

Default value of short address.

Referenced by init_tal_pib().

#define TAL_TRANSMIT_POWER_DEFAULT   (0x04)

Referenced by config_per_test_parameters(), peer_rsp_rcvd_exit(), per_mode_receptor_init(), and set_default_configuration_peer_node().