- s -

• s_tap_int : bma250.c , bma222.c
• scale_lsb_per_dps : imu3000.c
• scale_table : hmc5883l.c
• scan_channel_mask : per_mode_initiator.c
• scan_duration : per_mode_initiator.c
• scanning : per_mode_initiator.c
• sd_mmc_card : sd_mmc.c
• sd_mmc_cards : sd_mmc.c
• sd_mmc_ejected : sd_mmc_mem.c
• sd_mmc_nb_block_remaining : sd_mmc.c
• sd_mmc_nb_block_to_tranfer : sd_mmc.c
• sd_mmc_slot_sel : sd_mmc.c
• sd_mmc_trans_units : sd_mmc.c
• sd_trans_multipliers : sd_mmc.c
• sector_buf : at45dbx_mem.c
• sector_buf_0 : sd_mmc_mem.c
• sector_buf_1 : sd_mmc_mem.c
• selected_pallet_color : paint_demo.c
• sensor_dlpf_cfg : imu3000.c
• sensor_fs_sel : imu3000.c
• sensor_oss : bmp.c
• sensors : eeprom_access.c , xmega/applications/xmega_a3bu_xplained_demo/qtouch/touch_api.h , thirdparty/qtouch/generic/include/touch_api.h
• seq_num : peer_search_initiator.c , peer_search_receptor.c , range_measure.c
• seq_num_initiator : per_mode_initiator.c
• seq_num_receptor : per_mode_receptor.c
• SequenceH : QDebugTransport.h , QDebugTransport.c
• SequenceL : QDebugTransport.c , QDebugTransport.h
• serial : example1_xmega.c
• serial_rx_buf : sio2ncp.c , usb/sio2host.c , uart/sio2host.c
• serial_rx_buf_head : sio2ncp.c , usb/sio2host.c , uart/sio2host.c
• serial_rx_buf_tail : sio2ncp.c , usb/sio2host.c , uart/sio2host.c
• serial_rx_count : sio2ncp.c , usb/sio2host.c , uart/sio2host.c
• set_attribute_index : thirdparty/wireless/avr2102_rf4control/apps/zid/dev/terminal/main.c
• set_param_cb : per_mode_initiator.c
• sfh7770_initialized : sfh7770.c
• SHORTENUM : perf_msg_const.h , mac_msg_const.h
• single_ans : aes_example2.c , aes_example3.c , des_example.c , aes_example1.c
• sio_rx_buf : perf_api_serial_handler.c , avr2102_rf4control/apps/zid/serial_if/serial_interface.c , avr2102_rf4control/addons/serial_interface/serial_interface.c , avr2025_mac/addons/serial_if/src/serial_interface.c
• sio_rx_length : tester.c , avr2025_mac/addons/serial_if/src/serial_interface.c , Peer2Peer.c , perf_api_serial_handler.c , avr2102_rf4control/apps/zid/serial_if/serial_interface.c , avr2102_rf4control/addons/serial_interface/serial_interface.c
• sio_rx_ptr : perf_api_serial_handler.c , avr2102_rf4control/apps/zid/serial_if/serial_interface.c , avr2102_rf4control/addons/serial_interface/serial_interface.c , avr2025_mac/addons/serial_if/src/serial_interface.c
• sio_rx_state : perf_api_serial_handler.c , avr2102_rf4control/apps/zid/serial_if/serial_interface.c , avr2102_rf4control/addons/serial_interface/serial_interface.c , avr2025_mac/addons/serial_if/src/serial_interface.c
• sio_tx_buf : perf_api_serial_handler.c , avr2102_rf4control/apps/zid/serial_if/serial_interface.c , avr2102_rf4control/addons/serial_interface/serial_interface.c , avr2025_mac/addons/serial_if/src/serial_interface.c
• slave : xmega/drivers/twi/unit_tests/unit_tests.c
• sleepmgr_configs : sleepmgr.c , xmega/sleepmgr.h
• sleepmgr_locks : sleepmgr.c , xmega/sleepmgr.h
• slider : app_widget.c
• slope_first_x : bma250.c , bma222.c
• slope_first_y : bma250.c , bma222.c
• slope_first_z : bma250.c , bma222.c
• slope_int : bma250.c , bma222.c , bma220.c
• slope_sign : bma250.c , bma222.c
• smiley_data : common/services/gfx_mono/example1/example1.c
• SNS_array : xmega/applications/xmega_a3bu_xplained_classb_oven/drv/touch.c , xmega/applications/xmega_a3bu_xplained_demo/qtouch/touch.c , common/services/usb/class/hid/device/generic/example_hid_qtouch/touch.c
• SNSK_array : common/services/usb/class/hid/device/generic/example_hid_qtouch/touch.c , xmega/applications/xmega_a3bu_xplained_classb_oven/drv/touch.c , xmega/applications/xmega_a3bu_xplained_demo/qtouch/touch.c
• SOFTWARE : user_board.h
• source : xmega/drivers/crc/example3/example3.c , dma_example.c
• SPECIAL : user_board.h
• SPI_AT86RFX_DEVICE : trx_access.c
• spinner_choicestrings : example_spinctrl.c
• st_result : bma150.c
• standby_state : zid_adaptor.h
• start_app_key : isp.c
• start_time : per_mode_initiator.c
• state : oven_plant.c
• state_flag : wdt_example.c
• state_table : performance_main.c
• status : twim.c
• status_byte : bma220.c , bma150.c , bma222.c , bma250.c
• status_field : bma222.c , bma220.c , bma150.c , bma250.c
• STATUTORY : user_board.h
• stb_restart_required : stb.c
• stdio_base : read.c , write.c , stdio_serial.h , stdio_usb.h
• stdio_usb_interface_enable : stdio_usb.c
• storage_buffer : performance_main.c
• stream_pkt : perf_api.h , per_mode_common_utils.c
• sub_frame : app_widget.c
• sub_frame_background : app_widget.c
• success : aes_example2.c , aes_example3.c , aes_example1.c
• sys_time : time.c
• sysfont : mono/sysfont.h , sysfont.c , sysfont.h , mono/sysfont.c
• SYSFONT_DEFINE_GLYPHS : mono/sysfont.c
• SysTimerIrqCount : sysTimer.c