  app_config.h | These are application-specific resources which are used in the application in addition to the underlaying stack |
| app_frame_format.h | Defines various structure definitions, used to communicate with Peer node over the air - Performance Analyzer application |
| app_init.h | Initialization prototypes and enumerations - Performance Analyzer application |
| app_peer_search.h | Function prototypes for Peera Search process - Performance Analyzer application Copyright (c) 2013-2018 Microchip Technology Inc |
| app_per_mode.h | PER Measuremnt mode prototypes and defines |
| app_range_mode.h | Range Measurement mode related prototypes and defines |
| at86rf233.h | File contains register and command defines specific for AT86RF231 |
| avr2025_mac.h | Copyright (c) 2014-2018 Microchip Technology Inc |
| bmm.c | This file implements the functions for initializing buffer module, allocating and freeing up buffers |
| bmm.h | This file contains the Buffer Management Module definitions |
| board.h | Standard board header file |
| bpm.c | BPM driver |
| bpm.h | BPM driver |
| common_hw_timer.h | Copyright (c) 2014-2018 Microchip Technology Inc |
| common_sw_timer.c | Copyright (c) 2013-2018 Microchip Technology Inc |
| common_sw_timer.h | Copyright (c) 2013-2018 Microchip Technology Inc |
| compiler.h | Commonly used includes, types and macros |
| conf_board.h | Configuration File for SAM4L-EK Board |
| conf_clock.h | Chip-specific system clock manager configuration |
| conf_common_sw_timer.h | USART Serial configuration |
| conf_hw_timer.h | USART Serial configuration |
| conf_perf_analyzer.h | Module configuration |
| conf_sio2host.h | Serial Input & Output configuration |
| conf_spi_master.h | Spi Master configuration |
| conf_trx_access.h | Common TRX Access Configuration |
| conf_uart_serial.h | Serial USART service configuration |
| cycle_counter.c | ARM functions for busy-wait delay loops |
| cycle_counter.h | ARM functions for busy-wait delay loops |
| delay.h | Common Delay Service |
| dfll.c | Chip-specific DFLL implementation |
| dfll.h | DFLL management |
| sam4l/dfll.h | Chip-specific DFLL definitions |
| flashcalw.c | FlashCALW driver for SAM4L |
| flashcalw.h | FlashCALW driver for SAM4L |
| genclk.h | Generic clock management |
| sam4l/genclk.h | Chip-specific generic clock management |
| gpio.c | GPIO driver |
| gpio.h | SAM GPIO driver |
| hw_timer.c | Copyright (c) 2014-2018 Microchip Technology Inc |
| hw_timer.h | Copyright (c) 2014-2018 Microchip Technology Inc |
| ieee_154g.h | This header holds all IEEE 802.15.4g-2012 constants and attribute identifiers |
| ieee_const.h | This header holds all IEEE 802.15.4-2006 constants and attribute identifiers |
| init.c | SAM4L Xplained Pro board initialization |
| init_state.c | Initilization functions and utilities - Performance Analyzer application |
| interrupt.h | Global interrupt management for 8- and 32-bit AVR |
| interrupt_sam_nvic.c | Global interrupt management for SAM D20, SAM3 and SAM4 (NVIC based) |
| interrupt_sam_nvic.h | Global interrupt management for SAM D20, SAM3 and SAM4 (NVIC based) |
| io.h | Arch file for SAM |
| ioport.h | Common IOPORT service main header file for AVR, UC3 and ARM architectures |
| ioport_gpio.h | SAM architecture specific IOPORT service implementation header file |
| led.h | SAM4L Xplained Pro board LEDs support package |
| mac.h | Provides MAC API to access MAC Layer functionality |
| mac_api.h | MAC API for IEEE 802.15.4-2006 |
| mac_build_config.h | This header file declares macros for various build configurations |
| mac_config.h | These are all timer IDs which are used in MAC |
| mac_msg_const.h | This file defines all message constants |
| mac_msg_type_data_ind.h | This file defines all message structures for the MAC |
| mac_msg_types.h | This file defines all message structures for the MAC |
| main.c | Main of Performance_Analyzer application |
| mrepeat.h | Preprocessor macro repeating utils |
| osc.c | Chip-specific oscillator management functions |
| osc.h | Oscillator management |
| sam4l/osc.h | Chip-specific oscillator management functions |
| pal.c | |
| pal.h | PAL related APIs |
| pal_generic.h | PAL Generic APIs |
| parts.h | Atmel part identification macros |
| peer_search_initiator.c | Initiator/Transmitter functionalities in Peer Search Process - Performance Analyzer application |
| peer_search_receptor.c | Receptor functionalities in Peer Search Process - Performance Analyzer application Copyright (c) 2013-2018 Microchip Technology Inc |
| per_mode_common_utils.c | Common utilities for both Initiator and Receptor in PER Measurement mode - Performance Analyzer application |
| per_mode_initiator.c | Initiator/Transmitter functionalities in PER Measurement mode - Performance Analyzer application This is the source code of a Packet Error Rate Measurement mode as Initiator |
| per_mode_receptor.c | Receptor functionalities in PER Measurement mode - Performance Analyzer application Copyright (c) 2013-2018 Microchip Technology Inc |
| perf_api.h | API function protypes - Performance Analyzer application |
| perf_api_serial_handler.c | SIO service implementation - Performance Analyzer application |
| perf_api_serial_handler.h | This file contains macros and function prototypes for SIO handling |
| perf_msg_const.h | This file defines all Req, confirm, Indication message constants |
| performance_main.c | Main of Performance_Analyzer application |
| performance_main.h | API function protypes - Performance Analyzer application |
| pll.c | Chip-specific PLL implementation |
| pll.h | PLL management |
| sam4l/pll.h | Chip-specific PLL definitions |
| preprocessor.h | Preprocessor utils |
| qmm.c | This file implements the functions for initializing the queues, appending a buffer into the queue, removing a buffer from the queue and reading a buffer from the queue as per the search criteria |
| qmm.h | This file contains the Queue Management Module definitions |
| range_measure.c | Range Measurement mode functionaities - Performance Anallyzer application |
| read.c | System-specific implementation of the _read function used by the standard library |
| return_val.h | Return values of APIs |
| sam4l_xplained_pro.h | SAM4L Xplained Pro board definition |
| serial.h | Serial Mode management |
| sio2host.c | Handles Serial I/O Functionalities For the Host Device |
| sio2host.h | Event handling Serial I/O Functionalities |
| spi.c | Serial Peripheral Interface (SPI) driver for SAM |
| spi.h | Serial Peripheral Interface (SPI) driver for SAM |
| spi_master.c | SPI master common service for SAM |
| sam_spi/spi_master.h | SPI master common service for SAM |
| spi_master.h | SPI Master Mode management |
| stack_config.h | Stack configuration parameters |
| status_codes.h | Status code definitions |
| stdio_serial.h | Common Standard I/O Serial Management |
| stringz.h | Preprocessor stringizing utils |
| sysclk.c | Chip-specific system clock management functions |
| sam4l/sysclk.h | Chip-specific system clock management functions |
| sysclk.h | System clock management |
| tal.c | This file implements the TAL state machine and provides general functionality used by the TAL |
| tal.h | This file contains TAL API function declarations |
| tal_build_config.h | This file contains TAL API function declarations |
| tal_config.h | File contains TAL configuration parameters |
| tal_constants.h | This file contains constants used througthout the TAL |
| tal_ed.c | This file implements ED Scan |
| tal_generic.h | This file contains defines for TAL types |
| tal_helper.c | |
| tal_helper.h | This file contains TAL helper function declarations |
| tal_init.c | This file implements functions for initializing TAL |
| tal_internal.h | This header file contains types and variable definition that are used within the TAL only |
| tal_irq_handler.c | This file handles the interrupts generated by the transceiver |
| tal_irq_handler.h | This header file contains the interrupt handling definitions |
| tal_pib.c | This file handles the TAL PIB attributes, set/get and initialization |
| tal_pib.h | This file contains the prototypes for TAL PIB functions |
| tal_pwr_mgmt.c | This file implements TAL power management functionality of the transceiver |
| tal_rx.c | This file implements the frame reception functions |
| tal_rx.h | File contains macros and modules used while processing a received frame |
| tal_rx_enable.c | File provides functionality supporting RX-Enable feature |
| tal_slotted_csma.c | This file implements slotted CSMA-CA functions |
| tal_slotted_csma.h | File provides CSMA-CA states |
| tal_timer_config.h | File contains TAL timer configuration parameters |
| tal_tx.c | This file handles the frame transmission within the TAL |
| tal_tx.h | File contains the TAL sub-state macros and functions that perform frame transmission |
| tal_types.h | This file contains defines for TAL types |
| tc.c | SAM Timer Counter (TC) driver |
| tc.h | SAM Timer Counter (TC) driver |
| tfa.c | Implementation of Transceiver Feature Access (TFA) functionality |
| tfa.h | This file is the interface for Transceiver Feature Access (TFA) functionality |
| tpaste.h | Preprocessor token pasting utils |
| trx_access.c | |
| trx_access.h | HAL related APIs for externally plugged transceivers |
| uart_serial.h | Uart Serial for SAM |
| usart.c | Universal Synchronous Asynchronous Receiver Transmitter (USART) driver for SAM |
| usart.h | Universal Synchronous Asynchronous Receiver Transmitter (USART) driver for SAM |
| usart_serial.c | USART Serial driver functions |
| user_interface.c | LED, Button and terminal print functions - Performance Analyzer application |
| user_interface.h | LED,Button,Terminal print event prototypes and defines |
| wait_for_event.c | Event handling functionalities to start Peer Search - Performance Analyzer application |
| wdt_sam4l.c | Watchdog Timer (WDT) driver for SAM4L |
| wdt_sam4l.h | Watchdog Timer (WDT) driver for SAM4L |
 write.c | System-specific implementation of the _write function used by the standard library |
1.8.5