Here is a list of all functions, variables, defines, enums, and typedefs with links to the files they belong to:

- b -

• B1 : bmp.c
• B2 : bmp.c
• b_at45dbx_unloaded : at45dbx_mem.c
• b_preample_run : udi_phdc.c
• b_run : udi_phdc.c
• b_vmem_unloaded : virtual_mem.c
• BACKOFF_WAITING_FOR_BEACON : at86rf212/inc/tal_slotted_csma.h , at86rf212b/inc/tal_slotted_csma.h , at86rf233/inc/tal_slotted_csma.h , at86rf232/inc/tal_slotted_csma.h , at86rf231/inc/tal_slotted_csma.h
• BACKOFF_WAITING_FOR_CCA_TIMER : at86rf232/inc/tal_slotted_csma.h , at86rf231/inc/tal_slotted_csma.h , at86rf212/inc/tal_slotted_csma.h , at86rf212b/inc/tal_slotted_csma.h , at86rf233/inc/tal_slotted_csma.h
• BACKWARD : zrc.h
• BAND_2400 : tal.h
• BAND_2400_BASE_CHANNEL : rf4ce.h
• BAND_2400_CHANNEL_OFFSET : rf4ce.h
• BAND_900 : tal.h
• BAND_900_BASE_CHANNEL : rf4ce.h
• BAND_900_CHANNEL_OFFSET : rf4ce.h
• BAND_MULTIPLE : tal.h
• band_table : itg3200.c , imu3000.c , kxtf9.c , bma020.c , bma220.c , bma150.c , bma180.c , bma250.c , bma222.c , hmc5883l.c
• BANDWIDTH : drop_detector.c
• BANDWIDTH_1000HZ : bma220.h
• BANDWIDTH_100HZ : bma020.h , bma150.h
• BANDWIDTH_125HZ : bma220.h
• BANDWIDTH_1500HZ : bma020.h , bma150.h
• BANDWIDTH_190HZ : bma020.h , bma150.h
• BANDWIDTH_250HZ : bma220.h
• BANDWIDTH_25HZ : bma020.h , bma150.h
• BANDWIDTH_32HZ : bma220.h
• BANDWIDTH_375HZ : bma020.h , bma150.h
• BANDWIDTH_500HZ : bma220.h
• BANDWIDTH_50HZ : bma020.h , bma150.h
• BANDWIDTH_64HZ : bma220.h
• BANDWIDTH_750HZ : bma020.h , bma150.h
• barrier : compiler.h
• Base_Channel : nwk_internal.h
• BASE_CHANNEL_CHANGE : thirdparty/wireless/avr2102_rf4control/apps/zrc/terminal_tgt/main.c
• BASE_ISM_FREQUENCY_MHZ : app_per_mode.h , tal_helper.h
• BAT_LOW : avr2130_lwmesh/source/phy/at86rf233/inc/at86rf233.h , avr2130_lwmesh/source/phy/at86rf231/inc/at86rf231.h , avr2130_lwmesh/source/phy/at86rf212b/inc/at86rf212b.h , avr2130_lwmesh/source/phy/at86rf212/inc/at86rf212.h
• BATMON_ABOVE_THRES : avr2025_mac/source/tal/at86rf231/inc/at86rf231.h
• BATMON_BELOW_THRES : avr2025_mac/source/tal/at86rf231/inc/at86rf231.h
• BATMON_HIGH_RANGE : avr2025_mac/source/tal/at86rf231/inc/at86rf231.h
• BATMON_HR : avr2130_lwmesh/source/phy/at86rf231/inc/at86rf231.h , avr2130_lwmesh/source/phy/at86rf212b/inc/at86rf212b.h , avr2130_lwmesh/source/phy/at86rf212/inc/at86rf212.h , avr2130_lwmesh/source/phy/at86rf233/inc/at86rf233.h
• BATMON_HR_HIGH : avr2025_mac/source/tal/at86rf212/inc/at86rf212.h , avr2025_mac/source/tal/at86rf212b/inc/at86rf212b.h , avr2025_mac/source/tal/at86rf233/inc/at86rf233.h , at86rf232.h
• BATMON_HR_LOW : avr2025_mac/source/tal/at86rf212/inc/at86rf212.h , avr2025_mac/source/tal/at86rf212b/inc/at86rf212b.h , avr2025_mac/source/tal/at86rf233/inc/at86rf233.h , at86rf232.h
• BATMON_LOW_RANGE : avr2025_mac/source/tal/at86rf231/inc/at86rf231.h
• BATMON_NOT_VALID : avr2025_mac/source/tal/at86rf212/inc/at86rf212.h , avr2025_mac/source/tal/at86rf212b/inc/at86rf212b.h , avr2025_mac/source/tal/at86rf233/inc/at86rf233.h , at86rf232.h
• BATMON_OK : avr2130_lwmesh/source/phy/at86rf231/inc/at86rf231.h , avr2130_lwmesh/source/phy/at86rf212b/inc/at86rf212b.h , avr2130_lwmesh/source/phy/at86rf212/inc/at86rf212.h , avr2130_lwmesh/source/phy/at86rf233/inc/at86rf233.h
• BATMON_REG : avr2130_lwmesh/source/phy/at86rf231/inc/at86rf231.h , avr2130_lwmesh/source/phy/at86rf212b/inc/at86rf212b.h , avr2130_lwmesh/source/phy/at86rf212/inc/at86rf212.h , avr2130_lwmesh/source/phy/at86rf233/inc/at86rf233.h
• BATMON_VALID : avr2025_mac/source/tal/at86rf212/inc/at86rf212.h , avr2025_mac/source/tal/at86rf212b/inc/at86rf212b.h , avr2025_mac/source/tal/at86rf233/inc/at86rf233.h , at86rf232.h
• BATMON_VTH : avr2130_lwmesh/source/phy/at86rf231/inc/at86rf231.h , avr2130_lwmesh/source/phy/at86rf212b/inc/at86rf212b.h , avr2130_lwmesh/source/phy/at86rf212/inc/at86rf212.h , avr2130_lwmesh/source/phy/at86rf233/inc/at86rf233.h
• BATT_LIFE_EXT_BIT_POS : ieee_const.h
• BATTERY_STATUS_REQ : vendor_data.h
• BATTERY_STATUS_RESP : vendor_data.h
• bc_data_cb() : thirdparty/wireless/avr2025_mac/apps/mac/beacon/coord/main.c , thirdparty/wireless/avr2025_mac/apps/mac/no_beacon/coord/main.c
• bc_rx_cnt : thirdparty/wireless/avr2025_mac/apps/mac/beacon/dev/main.c , thirdparty/wireless/avr2025_mac/apps/mac/no_beacon/dev/main.c
• bcn_payload_update_cb() : thirdparty/wireless/avr2025_mac/apps/mac/beacon/coord/main.c , thirdparty/wireless/avr2025_mac/apps/mac/no_beacon/coord/main.c
• BE : at86rf231/src/tal_slotted_csma.c , at86rf212/src/tal_slotted_csma.c , at86rf212b/src/tal_slotted_csma.c , at86rf233/src/tal_slotted_csma.c , at86rf232/src/tal_slotted_csma.c
• BE16 : compiler.h
• be16_t : compiler.h
• be16_to_cpu : compiler.h
• BE16_TO_CPU : compiler.h
• BE32 : compiler.h
• be32_t : compiler.h
• be32_to_cpu : compiler.h
• BE32_TO_CPU : compiler.h
• beacon_loss_timer_cb() : at86rf231/src/tal_slotted_csma.c , at86rf212/src/tal_slotted_csma.c , at86rf212b/src/tal_slotted_csma.c , at86rf233/src/tal_slotted_csma.c , at86rf232/src/tal_slotted_csma.c
• BEACON_MAX_PEND_ADDR_CNT : mac_beacon.c
• BEACON_MESSAGE : tal.h
• beacon_payload : thirdparty/wireless/avr2025_mac/apps/mac/beacon/coord/main.c , thirdparty/wireless/avr2025_mac/apps/mac/no_beacon/coord/main.c
• BEACON_PAYLOAD_LEN : beacon/coord/beacon_app.h , no_beacon/coord/beacon_app.h , mac_beacon.c
• BEACONREQUEST : tal.h
• BG_COLOR : ili9341_example.c
• BIT_COUNT : perf_msg_const.h
• bit_reverse16 : compiler.h
• bit_reverse32 : compiler.h
• bit_reverse64 : compiler.h
• bit_reverse8 : compiler.h
• bitmap : ili9341_example.c
• bitmap_cloud : bitmaps.c , bitmaps.h
• bitmap_indoor : bitmaps.c , bitmaps.h
• bitmap_moon : bitmaps.c , bitmaps.h
• bitmap_pot_off : oven_bitmaps.c , oven_bitmaps.h
• bitmap_pot_on : oven_bitmaps.c , oven_bitmaps.h
• bitmap_ptr : ili9341_example.c
• bitmap_sun : bitmaps.c , bitmaps.h
• bits2bytes : font.h
• block_ans : des_example.c
• block_compare() : xmega/drivers/dma/unit_tests/unit_tests.c
• block_compare_reverse() : xmega/drivers/dma/unit_tests/unit_tests.c
• BLOCK_COUNT : aes_example2.c
• block_fill() : xmega/drivers/dma/unit_tests/unit_tests.c
• BLOCK_LENGTH : aes_example2.c , aes_example3.c , aes_example1.c
• BMA020_ACC_X_LSB : bma020.h
• BMA020_ACC_X_MSB : bma020.h
• BMA020_ACC_Y_LSB : bma020.h
• BMA020_ACC_Y_MSB : bma020.h
• BMA020_ACC_Z_LSB : bma020.h
• BMA020_ACC_Z_MSB : bma020.h
• BMA020_ANY_MOTION_THRES : bma020.h
• bma020_bus_addr : sensor_dev.h
• BMA020_CHIP_ID : bma020.h
• BMA020_CHIP_VERSION : bma020.h
• BMA020_CTRL1 : bma020.h
• BMA020_CTRL2 : bma020.h
• BMA020_CTRL3 : bma020.h
• BMA020_CTRL4 : bma020.h
• BMA020_CTRL5 : bma020.h
• BMA020_CUST1 : bma020.h
• BMA020_CUST2 : bma020.h
• BMA020_DATA_RESOLUTION : bma020.h
• BMA020_DATA_SHIFT_RIGHT : bma020.h
• bma020_device_id() : bma020.c
• bma020_get_accel() : bma020.c
• BMA020_HG_DUR : bma020.h
• BMA020_HG_THRES : bma020.h
• BMA020_ID_VAL : bma020.h
• bma020_init() : bma020.c , bma020.h , sensor_dev.h
• bma020_ioctl() : bma020.c
• BMA020_LG_DUR : bma020.h
• BMA020_LG_THRES : bma020.h
• bma020_read() : bma020.c
• bma020_set_bandwidth() : bma020.c
• bma020_set_range() : bma020.c
• BMA020_SPI_MODE : bma020.h
• BMA020_STATUS1 : bma020.h
• BMA020_TWI_ADDR : bma020.h
• BMA150_ACC_X_LSB : bma150.h
• BMA150_ACC_X_MSB : bma150.h
• BMA150_ACC_Y_LSB : bma150.h
• BMA150_ACC_Y_MSB : bma150.h
• BMA150_ACC_Z_LSB : bma150.h
• BMA150_ACC_Z_MSB : bma150.h
• BMA150_ANY_MOTION_THRES : bma150.h
• bma150_bus_addr : sensor_dev.h
• BMA150_CHIP_ID : bma150.h
• BMA150_CHIP_VERSION : bma150.h
• BMA150_CTRL1 : bma150.h
• BMA150_CTRL2 : bma150.h
• BMA150_CTRL3 : bma150.h
• BMA150_CTRL4 : bma150.h
• BMA150_CTRL5 : bma150.h
• BMA150_CUST1 : bma150.h
• BMA150_CUST2 : bma150.h
• BMA150_DATA_RESOLUTION : bma150.h
• bma150_device_id() : bma150.c
• BMA150_EE_ANY_MOTION_THRES : bma150.h
• BMA150_EE_CTRL2 : bma150.h
• BMA150_EE_CTRL3 : bma150.h
• BMA150_EE_CTRL4 : bma150.h
• BMA150_EE_CTRL5 : bma150.h
• BMA150_EE_CUST1 : bma150.h
• BMA150_EE_CUST2 : bma150.h
• BMA150_EE_GAIN_OFF_T : bma150.h
• BMA150_EE_GAIN_OFF_X : bma150.h
• BMA150_EE_GAIN_OFF_Y : bma150.h
• BMA150_EE_GAIN_OFF_Z : bma150.h
• BMA150_EE_HG_DUR : bma150.h
• BMA150_EE_HG_THRES : bma150.h
• BMA150_EE_LG_DUR : bma150.h
• BMA150_EE_LG_THRES : bma150.h
• BMA150_EE_OFFSET_T : bma150.h
• BMA150_EE_OFFSET_X : bma150.h
• BMA150_EE_OFFSET_Y : bma150.h
• BMA150_EE_OFFSET_Z : bma150.h
• bma150_event() : bma150.c
• BMA150_GAIN_OFF_T : bma150.h
• BMA150_GAIN_OFF_X : bma150.h
• BMA150_GAIN_OFF_Y : bma150.h
• BMA150_GAIN_OFF_Z : bma150.h
• bma150_get_accel() : bma150.c
• bma150_get_temperature() : bma150.c
• bma150_get_threshold() : bma150.c
• BMA150_HG_DUR : bma150.h
• BMA150_HG_THRES : bma150.h
• BMA150_ID_VAL : bma150.h
• bma150_init() : bma150.c , bma150.h , sensor_dev.h
• bma150_ioctl() : bma150.c
• bma150_isr() : bma150.c
• BMA150_LG_DUR : bma150.h
• BMA150_LG_THRES : bma150.h
• BMA150_OFFSET_T : bma150.h
• BMA150_OFFSET_X : bma150.h
• BMA150_OFFSET_Y : bma150.h
• BMA150_OFFSET_Z : bma150.h
• bma150_orientation : sensors_xplained.h
• bma150_read() : bma150.c
• bma150_selftest() : bma150.c
• bma150_set_bandwidth() : bma150.c
• bma150_set_range() : bma150.c
• bma150_set_state() : bma150.c
• bma150_set_threshold() : bma150.c
• bma150_sigint : sensors_xplained.h
• bma150_sigout : sensors_xplained.h
• BMA150_SPI_MODE : bma150.h
• BMA150_STATUS1 : bma150.h
• BMA150_TEMP : bma150.h
• BMA150_TEMP_OFFSET : bma150.h
• BMA150_TWI_ADDR : bma150.h
• BMA180_ACC_X_LSB : bma180.h
• BMA180_ACC_X_MSB : bma180.h
• BMA180_ACC_Y_LSB : bma180.h
• BMA180_ACC_Y_MSB : bma180.h
• BMA180_ACC_Z_LSB : bma180.h
• BMA180_ACC_Z_MSB : bma180.h
• bma180_bus_addr : sensor_dev.h
• BMA180_BW_TCS : bma180.h
• BMA180_CD1 : bma180.h
• BMA180_CD2 : bma180.h
• BMA180_CHIP_ID : bma180.h
• BMA180_CHIP_VERSION : bma180.h
• BMA180_CTRL0 : bma180.h
• BMA180_CTRL1 : bma180.h
• BMA180_CTRL2 : bma180.h
• BMA180_CTRL3 : bma180.h
• BMA180_CTRL4 : bma180.h
• BMA180_DATA_RESOLUTION : bma180.h
• bma180_device_id() : bma180.c
• BMA180_EE_BW_TCS : bma180.h
• BMA180_EE_CD1 : bma180.h
• BMA180_EE_CD2 : bma180.h
• BMA180_EE_CTRL_REG3 : bma180.h
• BMA180_EE_CTRL_REG4 : bma180.h
• BMA180_EE_GAIN_T : bma180.h
• BMA180_EE_GAIN_X : bma180.h
• BMA180_EE_GAIN_Y : bma180.h
• BMA180_EE_GAIN_Z : bma180.h
• BMA180_EE_HIGH_DUR : bma180.h
• BMA180_EE_HIGH_LOW : bma180.h
• BMA180_EE_HIGH_TH : bma180.h
• BMA180_EE_HY : bma180.h
• BMA180_EE_LOW_DUR : bma180.h
• BMA180_EE_LOW_TH : bma180.h
• BMA180_EE_OFFSET_LSB1 : bma180.h
• BMA180_EE_OFFSET_LSB2 : bma180.h
• BMA180_EE_OFFSET_T : bma180.h
• BMA180_EE_OFFSET_X : bma180.h
• BMA180_EE_OFFSET_Y : bma180.h
• BMA180_EE_OFFSET_Z : bma180.h
• BMA180_EE_SLOPE_TAPSENS : bma180.h
• BMA180_EE_SLOPE_TH : bma180.h
• BMA180_EE_TAPSENS_TH : bma180.h
• BMA180_EE_TCO_X : bma180.h
• BMA180_EE_TCO_Y : bma180.h
• BMA180_EE_TCO_Z : bma180.h
• BMA180_GAIN_T : bma180.h
• BMA180_GAIN_X : bma180.h
• BMA180_GAIN_Y : bma180.h
• BMA180_GAIN_Z : bma180.h
• bma180_get_accel() : bma180.c
• bma180_get_temperature() : bma180.c
• BMA180_HIGH_DUR : bma180.h
• BMA180_HIGH_LOW_INFO : bma180.h
• BMA180_HIGH_TH : bma180.h
• BMA180_HY : bma180.h
• BMA180_ID_VAL : bma180.h
• bma180_init() : bma180.c , bma180.h , sensor_dev.h
• bma180_ioctl() : bma180.c
• BMA180_LOW_DUR : bma180.h
• BMA180_LOW_TH : bma180.h
• BMA180_OFFSET_LSB1 : bma180.h
• BMA180_OFFSET_LSB2 : bma180.h
• BMA180_OFFSET_T : bma180.h
• BMA180_OFFSET_X : bma180.h
• BMA180_OFFSET_Y : bma180.h
• BMA180_OFFSET_Z : bma180.h
• BMA180_RANGE_16G : bma180.h
• BMA180_RANGE_1_5G : bma180.h
• BMA180_RANGE_1G : bma180.h
• BMA180_RANGE_2G : bma180.h
• BMA180_RANGE_3G : bma180.h
• BMA180_RANGE_4G : bma180.h
• BMA180_RANGE_8G : bma180.h
• bma180_read() : bma180.c
• BMA180_RESET : bma180.h
• bma180_set_bandwidth() : bma180.c
• bma180_set_range() : bma180.c
• bma180_set_state() : bma180.c
• BMA180_SLOPE_TAPSENS_INFO : bma180.h
• BMA180_SLOPE_TH : bma180.h
• BMA180_SPI_MODE : bma180.h
• BMA180_STATUS1 : bma180.h
• BMA180_STATUS2 : bma180.h
• BMA180_STATUS3 : bma180.h
• BMA180_STATUS4 : bma180.h
• BMA180_TAPSENS_TH : bma180.h
• BMA180_TCO_X : bma180.h
• BMA180_TCO_Y : bma180.h
• BMA180_TCO_Z : bma180.h
• BMA180_TEMP : bma180.h
• BMA180_TEMP_OFFSET : bma180.h
• BMA180_TWI_ADDR : bma180.h
• BMA220_12_RSVD : bma220.h
• BMA220_13_RSVD : bma220.h
• BMA220_14_RSVD : bma220.h
• BMA220_15_RSVD : bma220.h
• BMA220_16_RSVD : bma220.h
• BMA220_BANDWIDTH_CONFIG : bma220.h
• bma220_bus_addr : sensor_dev.h
• BMA220_CHIP_ID : bma220.h
• BMA220_CHIP_VERSION : bma220.h
• BMA220_DATA_RESOLUTION : bma220.h
• bma220_device_id() : bma220.c
• BMA220_DIRECTION_CONFIG : bma220.h
• BMA220_DIRECTION_STATUS : bma220.h
• bma220_event() : bma220.c
• bma220_get_accel() : bma220.c
• bma220_get_threshold() : bma220.c
• BMA220_HG_CONFIG : bma220.h
• BMA220_HG_LG_THRESHOLD : bma220.h
• BMA220_ID_VAL : bma220.h
• bma220_init() : bma220.c , bma220.h , sensor_dev.h
• BMA220_INT_ENABLE1 : bma220.h
• BMA220_INT_ENABLE2 : bma220.h
• BMA220_INT_STATUS : bma220.h
• bma220_ioctl() : bma220.c
• bma220_isr() : bma220.c
• BMA220_LG_CONFIG : bma220.h
• BMA220_RANGE_SELFTEST : bma220.h
• bma220_read() : bma220.c
• bma220_register_t : bma220.h
• bma220_selftest() : bma220.c
• bma220_set_bandwidth() : bma220.c
• bma220_set_range() : bma220.c
• bma220_set_state() : bma220.c
• bma220_set_tap() : bma220.c
• bma220_set_threshold() : bma220.c
• BMA220_SLEEP_CONFIG : bma220.h
• bma220_sleep_en() : bma220.c
• BMA220_SLOPE_CONFIG : bma220.h
• BMA220_SOFTRESET : bma220.h
• BMA220_SPI_MODE : bma220.h
• BMA220_SPI_MODE_SELECT : bma220.h
• BMA220_SUSPEND_MODE : bma220.h
• BMA220_TAP_CONFIG : bma220.h
• BMA220_TWI_ADDR : bma220.h
• BMA220_X_AXIS_DATA : bma220.h
• BMA220_Y_AXIS_DATA : bma220.h
• BMA220_Z_AXIS_DATA : bma220.h
• BMA220_ZERO_G_OFFSET : bma220.h
• BMA222_01_RSVD : bma222.h
• BMA222_0D_RSVD : bma222.h
• BMA222_0E_RSVD : bma222.h
• BMA222_12_RSVD : bma222.h
• BMA222_15_RSVD : bma222.h
• BMA222_16_INTR_EN : bma222.h
• BMA222_17_INTR_EN : bma222.h
• BMA222_18_RSVD : bma222.h
• BMA222_19_INTR_MAP : bma222.h
• BMA222_1A_INTR_MAP : bma222.h
• BMA222_1B_INTR_MAP : bma222.h
• BMA222_1C_RSVD : bma222.h
• BMA222_1D_RSVD : bma222.h
• BMA222_1F_RSVD : bma222.h
• BMA222_29_RSVD : bma222.h
• BMA222_30_RSVD : bma222.h
• BMA222_31_RSVD : bma222.h
• BMA222_35_RSVD : bma222.h
• BMA222_ACC_X : bma222.h
• BMA222_ACC_Y : bma222.h
• BMA222_ACC_Z : bma222.h
• BMA222_BANDWIDTH : bma222.h
• BMA222_BANDWIDTH_1000Hz : bma222.h
• BMA222_BANDWIDTH_125Hz : bma222.h
• BMA222_BANDWIDTH_16Hz : bma222.h
• BMA222_BANDWIDTH_250Hz : bma222.h
• BMA222_BANDWIDTH_31Hz : bma222.h
• BMA222_BANDWIDTH_500Hz : bma222.h
• BMA222_BANDWIDTH_63Hz : bma222.h
• BMA222_BANDWIDTH_8Hz : bma222.h
• bma222_bus_addr : sensor_dev.h
• BMA222_CHIP_ID : bma222.h
• BMA222_D_TAP_EN : bma222.h
• BMA222_D_TAP_INT : bma222.h
• BMA222_DATA_EN : bma222.h
• BMA222_DATA_HIGH_BW : bma222.h
• BMA222_DATA_INT : bma222.h
• BMA222_DATA_RESOLUTION : bma222.h
• BMA222_DATA_UNFILTERED : bma222.h
• bma222_device_id() : bma222.c
• BMA222_DIGITAL_IO_CONTROL : bma222.h
• BMA222_EEPROM_CONTROL : bma222.h
• bma222_event() : bma222.c
• BMA222_EVENT_HYSTERESIS : bma222.h
• BMA222_FAST_OFFSET_COMP : bma222.h
• BMA222_FLAT : bma222.h
• BMA222_FLAT_EN : bma222.h
• BMA222_FLAT_HOLD_TIME : bma222.h
• BMA222_FLAT_INT : bma222.h
• BMA222_FLAT_THETA : bma222.h
• BMA222_G_RANGE : bma222.h
• bma222_get_accel() : bma222.c
• bma222_get_temperature() : bma222.c
• bma222_get_threshold() : bma222.c
• BMA222_HIGH_EN_X : bma222.h
• BMA222_HIGH_EN_Y : bma222.h
• BMA222_HIGH_EN_Z : bma222.h
• BMA222_HIGH_FIRST_X : bma222.h
• BMA222_HIGH_FIRST_Y : bma222.h
• BMA222_HIGH_FIRST_Z : bma222.h
• BMA222_HIGH_G_DURATION : bma222.h
• BMA222_HIGH_G_THRESHOLD : bma222.h
• BMA222_HIGH_INT : bma222.h
• BMA222_HIGH_SIGN_NEG : bma222.h
• BMA222_ID_VAL : bma222.h
• bma222_init() : bma222.c , bma222.h , sensor_dev.h
• BMA222_INT1_D_TAP : bma222.h
• BMA222_INT1_DATA : bma222.h
• BMA222_INT1_FLAT : bma222.h
• BMA222_INT1_HIGH : bma222.h
• BMA222_INT1_LOW : bma222.h
• BMA222_INT1_LVL_1 : bma222.h
• BMA222_INT1_OD : bma222.h
• BMA222_INT1_ORIENT : bma222.h
• BMA222_INT1_S_TAP : bma222.h
• BMA222_INT1_SLOPE : bma222.h
• BMA222_INT2_D_TAP : bma222.h
• BMA222_INT2_DATA : bma222.h
• BMA222_INT2_FLAT : bma222.h
• BMA222_INT2_HIGH : bma222.h
• BMA222_INT2_LOW : bma222.h
• BMA222_INT2_LVL_1 : bma222.h
• BMA222_INT2_OD : bma222.h
• BMA222_INT2_ORIENT : bma222.h
• BMA222_INT2_S_TAP : bma222.h
• BMA222_INT2_SLOPE : bma222.h
• BMA222_INT_LATCHED : bma222.h
• BMA222_INT_NON_LATCHED : bma222.h
• BMA222_INT_SRC_DATA : bma222.h
• BMA222_INT_SRC_HIGH : bma222.h
• BMA222_INT_SRC_LOW : bma222.h
• BMA222_INT_SRC_SLOPE : bma222.h
• BMA222_INT_SRC_TAP : bma222.h
• BMA222_INT_TMP_12_5ms : bma222.h
• BMA222_INT_TMP_1ms : bma222.h
• BMA222_INT_TMP_1sec : bma222.h
• BMA222_INT_TMP_250ms : bma222.h
• BMA222_INT_TMP_25ms : bma222.h
• BMA222_INT_TMP_2sec : bma222.h
• BMA222_INT_TMP_4sec : bma222.h
• BMA222_INT_TMP_500ms : bma222.h
• BMA222_INT_TMP_500us : bma222.h
• BMA222_INT_TMP_50ms : bma222.h
• BMA222_INT_TMP_8sec : bma222.h
• BMA222_INTR_DATA_SRC : bma222.h
• BMA222_INTR_PIN_CONFIG : bma222.h
• BMA222_INTR_PIN_MODE : bma222.h
• BMA222_INTR_STATUS : bma222.h
• bma222_ioctl() : bma222.c
• bma222_isr() : bma222.c
• BMA222_LOW_EN : bma222.h
• BMA222_LOW_G_DURATION : bma222.h
• BMA222_LOW_G_THRESHOLD : bma222.h
• BMA222_LOW_INT : bma222.h
• BMA222_LOWPOWER_EN : bma222.h
• BMA222_NEW_DATA_STATUS : bma222.h
• BMA222_NEW_DATA_X : bma222.h
• BMA222_NEW_DATA_Y : bma222.h
• BMA222_NEW_DATA_Z : bma222.h
• BMA222_OFFSET_FILT_X : bma222.h
• BMA222_OFFSET_FILT_Y : bma222.h
• BMA222_OFFSET_FILT_Z : bma222.h
• BMA222_OFFSET_UNFILT_X : bma222.h
• BMA222_OFFSET_UNFILT_Y : bma222.h
• BMA222_OFFSET_UNFILT_Z : bma222.h
• BMA222_ORIENT_EN : bma222.h
• BMA222_ORIENT_INT : bma222.h
• BMA222_ORIENTATION_CONFIG : bma222.h
• BMA222_ORIENTATION_STATUS : bma222.h
• BMA222_ORIENTATION_THETA : bma222.h
• BMA222_POWER_MODES : bma222.h
• BMA222_RANGE_16G : bma222.h
• BMA222_RANGE_2G : bma222.h
• BMA222_RANGE_4G : bma222.h
• BMA222_RANGE_8G : bma222.h
• bma222_read() : bma222.c
• bma222_register_t : bma222.h
• BMA222_RESET : bma222.h
• BMA222_RESET_INT : bma222.h
• BMA222_S_TAP_EN : bma222.h
• BMA222_S_TAP_INT : bma222.h
• BMA222_SELF_TEST_AXIS_X : bma222.h
• BMA222_SELF_TEST_AXIS_Y : bma222.h
• BMA222_SELF_TEST_AXIS_Z : bma222.h
• BMA222_SELF_TEST_NONE : bma222.h
• bma222_selftest() : bma222.c
• BMA222_SENSOR_SELF_TEST : bma222.h
• bma222_set_bandwidth() : bma222.c
• bma222_set_range() : bma222.c
• bma222_set_state() : bma222.c
• bma222_set_tap() : bma222.c
• bma222_set_threshold() : bma222.c
• BMA222_SLEEP_DUR_0_5ms : bma222.h
• BMA222_SLEEP_DUR_1000ms : bma222.h
• BMA222_SLEEP_DUR_100ms : bma222.h
• BMA222_SLEEP_DUR_10ms : bma222.h
• BMA222_SLEEP_DUR_1ms : bma222.h
• BMA222_SLEEP_DUR_25ms : bma222.h
• BMA222_SLEEP_DUR_2ms : bma222.h
• BMA222_SLEEP_DUR_4ms : bma222.h
• BMA222_SLEEP_DUR_500ms : bma222.h
• BMA222_SLEEP_DUR_50ms : bma222.h
• BMA222_SLEEP_DUR_6ms : bma222.h
• bma222_sleep_en() : bma222.c
• BMA222_SLOPE_DURATION : bma222.h
• BMA222_SLOPE_EN_X : bma222.h
• BMA222_SLOPE_EN_Y : bma222.h
• BMA222_SLOPE_EN_Z : bma222.h
• BMA222_SLOPE_FIRST_X : bma222.h
• BMA222_SLOPE_FIRST_Y : bma222.h
• BMA222_SLOPE_FIRST_Z : bma222.h
• BMA222_SLOPE_INT : bma222.h
• BMA222_SLOPE_SIGN_POS : bma222.h
• BMA222_SLOPE_THRESHOLD : bma222.h
• BMA222_SLOW_OFFSET_COMP : bma222.h
• BMA222_SOFTRESET : bma222.h
• BMA222_SPI_MODE : bma222.h
• BMA222_SUSPEND : bma222.h
• BMA222_TAP_CONFIG : bma222.h
• BMA222_TAP_FIRST_X : bma222.h
• BMA222_TAP_FIRST_Y : bma222.h
• BMA222_TAP_FIRST_Z : bma222.h
• BMA222_TAP_SAMP_FIELD : bma222.h
• BMA222_TAP_SIGN_POS : bma222.h
• BMA222_TAP_SLOPE_STATUS : bma222.h
• BMA222_TAP_TH_FIELD : bma222.h
• BMA222_TAP_TIMING : bma222.h
• BMA222_TEMP : bma222.h
• BMA222_TEMP_OFFSET : bma222.h
• BMA222_TWI_ADDR : bma222.h
• BMA222_XY_LANDSCAPE_L : bma222.h
• BMA222_XY_LANDSCAPE_R : bma222.h
• BMA222_XY_PORTRAIT_DOWN : bma222.h
• BMA222_XY_PORTRAIT_UP : bma222.h
• BMA222_Z_DOWN : bma222.h
• BMA250_01_RSVD : bma250.h
• BMA250_0D_RSVD : bma250.h
• BMA250_0E_RSVD : bma250.h
• BMA250_12_RSVD : bma250.h
• BMA250_15_RSVD : bma250.h
• BMA250_16_INTR_EN : bma250.h
• BMA250_17_INTR_EN : bma250.h
• BMA250_18_RSVD : bma250.h
• BMA250_19_INTR_MAP : bma250.h
• BMA250_1A_INTR_MAP : bma250.h
• BMA250_1B_INTR_MAP : bma250.h
• BMA250_1C_RSVD : bma250.h
• BMA250_1D_RSVD : bma250.h
• BMA250_1F_RSVD : bma250.h
• BMA250_29_RSVD : bma250.h
• BMA250_30_RSVD : bma250.h
• BMA250_31_RSVD : bma250.h
• BMA250_35_RSVD : bma250.h
• BMA250_ACC_X : bma250.h
• BMA250_ACC_Y : bma250.h
• BMA250_ACC_Z : bma250.h
• BMA250_BANDWIDTH : bma250.h
• BMA250_BANDWIDTH_1000Hz : bma250.h
• BMA250_BANDWIDTH_125Hz : bma250.h
• BMA250_BANDWIDTH_16Hz : bma250.h
• BMA250_BANDWIDTH_250Hz : bma250.h
• BMA250_BANDWIDTH_31Hz : bma250.h
• BMA250_BANDWIDTH_500Hz : bma250.h
• BMA250_BANDWIDTH_63Hz : bma250.h
• BMA250_BANDWIDTH_8Hz : bma250.h
• bma250_bus_addr : sensor_dev.h
• BMA250_CHIP_ID : bma250.h
• BMA250_D_TAP_EN : bma250.h
• BMA250_D_TAP_INT : bma250.h
• BMA250_DATA_EN : bma250.h
• BMA250_DATA_HIGH_BW : bma250.h
• BMA250_DATA_INT : bma250.h
• BMA250_DATA_RESOLUTION : bma250.h
• BMA250_DATA_UNFILTERED : bma250.h
• bma250_device_id() : bma250.c
• BMA250_DIGITAL_IO_CONTROL : bma250.h
• BMA250_EEPROM_CONTROL : bma250.h
• bma250_event() : bma250.c
• BMA250_EVENT_HYSTERESIS : bma250.h
• BMA250_FAST_OFFSET_COMP : bma250.h
• BMA250_FLAT : bma250.h
• BMA250_FLAT_EN : bma250.h
• BMA250_FLAT_HOLD_TIME : bma250.h
• BMA250_FLAT_INT : bma250.h
• BMA250_FLAT_THETA : bma250.h
• BMA250_G_RANGE : bma250.h
• bma250_get_accel() : bma250.c
• bma250_get_temperature() : bma250.c
• bma250_get_threshold() : bma250.c
• BMA250_HIGH_EN_X : bma250.h
• BMA250_HIGH_EN_Y : bma250.h
• BMA250_HIGH_EN_Z : bma250.h
• BMA250_HIGH_FIRST_X : bma250.h
• BMA250_HIGH_FIRST_Y : bma250.h
• BMA250_HIGH_FIRST_Z : bma250.h
• BMA250_HIGH_G_DURATION : bma250.h
• BMA250_HIGH_G_THRESHOLD : bma250.h
• BMA250_HIGH_INT : bma250.h
• BMA250_HIGH_SIGN_NEG : bma250.h
• BMA250_ID_VAL : bma250.h
• bma250_init() : bma250.c , sensor_dev.h , bma250.h
• BMA250_INT1_D_TAP : bma250.h
• BMA250_INT1_DATA : bma250.h
• BMA250_INT1_FLAT : bma250.h
• BMA250_INT1_HIGH : bma250.h
• BMA250_INT1_LOW : bma250.h
• BMA250_INT1_LVL_1 : bma250.h
• BMA250_INT1_OD : bma250.h
• BMA250_INT1_ORIENT : bma250.h
• BMA250_INT1_S_TAP : bma250.h
• BMA250_INT1_SLOPE : bma250.h
• BMA250_INT2_D_TAP : bma250.h
• BMA250_INT2_DATA : bma250.h
• BMA250_INT2_FLAT : bma250.h
• BMA250_INT2_HIGH : bma250.h
• BMA250_INT2_LOW : bma250.h
• BMA250_INT2_LVL_1 : bma250.h
• BMA250_INT2_OD : bma250.h
• BMA250_INT2_ORIENT : bma250.h
• BMA250_INT2_S_TAP : bma250.h
• BMA250_INT2_SLOPE : bma250.h
• BMA250_INT_LATCHED : bma250.h
• BMA250_INT_NON_LATCHED : bma250.h
• BMA250_INT_SRC_DATA : bma250.h
• BMA250_INT_SRC_HIGH : bma250.h
• BMA250_INT_SRC_LOW : bma250.h
• BMA250_INT_SRC_SLOPE : bma250.h
• BMA250_INT_SRC_TAP : bma250.h
• BMA250_INT_TMP_12_5ms : bma250.h
• BMA250_INT_TMP_1ms : bma250.h
• BMA250_INT_TMP_1sec : bma250.h
• BMA250_INT_TMP_250ms : bma250.h
• BMA250_INT_TMP_25ms : bma250.h
• BMA250_INT_TMP_2sec : bma250.h
• BMA250_INT_TMP_4sec : bma250.h
• BMA250_INT_TMP_500ms : bma250.h
• BMA250_INT_TMP_500us : bma250.h
• BMA250_INT_TMP_50ms : bma250.h
• BMA250_INT_TMP_8sec : bma250.h
• BMA250_INTR_DATA_SRC : bma250.h
• BMA250_INTR_PIN_CONFIG : bma250.h
• BMA250_INTR_PIN_MODE : bma250.h
• BMA250_INTR_STATUS : bma250.h
• bma250_ioctl() : bma250.c
• bma250_isr() : bma250.c
• BMA250_LOW_EN : bma250.h
• BMA250_LOW_G_DURATION : bma250.h
• BMA250_LOW_G_THRESHOLD : bma250.h
• BMA250_LOW_INT : bma250.h
• BMA250_LOWPOWER_EN : bma250.h
• BMA250_NEW_DATA_STATUS : bma250.h
• BMA250_NEW_DATA_X : bma250.h
• BMA250_NEW_DATA_Y : bma250.h
• BMA250_NEW_DATA_Z : bma250.h
• BMA250_OFFSET_FILT_X : bma250.h
• BMA250_OFFSET_FILT_Y : bma250.h
• BMA250_OFFSET_FILT_Z : bma250.h
• BMA250_OFFSET_UNFILT_X : bma250.h
• BMA250_OFFSET_UNFILT_Y : bma250.h
• BMA250_OFFSET_UNFILT_Z : bma250.h
• BMA250_ORIENT_EN : bma250.h
• BMA250_ORIENT_INT : bma250.h
• BMA250_ORIENTATION_CONFIG : bma250.h
• BMA250_ORIENTATION_STATUS : bma250.h
• BMA250_ORIENTATION_THETA : bma250.h
• BMA250_POWER_MODES : bma250.h
• BMA250_RANGE_16G : bma250.h
• BMA250_RANGE_2G : bma250.h
• BMA250_RANGE_4G : bma250.h
• BMA250_RANGE_8G : bma250.h
• bma250_read() : bma250.c
• bma250_register_t : bma250.h
• BMA250_RESET : bma250.h
• BMA250_RESET_INT : bma250.h
• BMA250_S_TAP_EN : bma250.h
• BMA250_S_TAP_INT : bma250.h
• BMA250_SELF_TEST_AXIS_X : bma250.h
• BMA250_SELF_TEST_AXIS_Y : bma250.h
• BMA250_SELF_TEST_AXIS_Z : bma250.h
• BMA250_SELF_TEST_NONE : bma250.h
• bma250_selftest() : bma250.c
• BMA250_SENSOR_SELF_TEST : bma250.h
• bma250_set_bandwidth() : bma250.c
• bma250_set_range() : bma250.c
• bma250_set_state() : bma250.c
• bma250_set_tap() : bma250.c
• bma250_set_threshold() : bma250.c
• BMA250_SLEEP_DUR_0_5ms : bma250.h
• BMA250_SLEEP_DUR_1000ms : bma250.h
• BMA250_SLEEP_DUR_100ms : bma250.h
• BMA250_SLEEP_DUR_10ms : bma250.h
• BMA250_SLEEP_DUR_1ms : bma250.h
• BMA250_SLEEP_DUR_25ms : bma250.h
• BMA250_SLEEP_DUR_2ms : bma250.h
• BMA250_SLEEP_DUR_4ms : bma250.h
• BMA250_SLEEP_DUR_500ms : bma250.h
• BMA250_SLEEP_DUR_50ms : bma250.h
• BMA250_SLEEP_DUR_6ms : bma250.h
• bma250_sleep_en() : bma250.c
• BMA250_SLOPE_DURATION : bma250.h
• BMA250_SLOPE_EN_X : bma250.h
• BMA250_SLOPE_EN_Y : bma250.h
• BMA250_SLOPE_EN_Z : bma250.h
• BMA250_SLOPE_FIRST_X : bma250.h
• BMA250_SLOPE_FIRST_Y : bma250.h
• BMA250_SLOPE_FIRST_Z : bma250.h
• BMA250_SLOPE_INT : bma250.h
• BMA250_SLOPE_SIGN_POS : bma250.h
• BMA250_SLOPE_THRESHOLD : bma250.h
• BMA250_SLOW_OFFSET_COMP : bma250.h
• BMA250_SOFTRESET : bma250.h
• BMA250_SPI_MODE : bma250.h
• BMA250_SUSPEND : bma250.h
• BMA250_TAP_CONFIG : bma250.h
• BMA250_TAP_FIRST_X : bma250.h
• BMA250_TAP_FIRST_Y : bma250.h
• BMA250_TAP_FIRST_Z : bma250.h
• BMA250_TAP_SAMP_FIELD : bma250.h
• BMA250_TAP_SIGN_POS : bma250.h
• BMA250_TAP_SLOPE_STATUS : bma250.h
• BMA250_TAP_TH_FIELD : bma250.h
• BMA250_TAP_TIMING : bma250.h
• BMA250_TEMP : bma250.h
• BMA250_TEMP_OFFSET : bma250.h
• BMA250_TWI_ADDR : bma250.h
• BMA250_XY_LANDSCAPE_L : bma250.h
• BMA250_XY_LANDSCAPE_R : bma250.h
• BMA250_XY_PORTRAIT_DOWN : bma250.h
• BMA250_XY_PORTRAIT_UP : bma250.h
• BMA250_Z_DOWN : bma250.h
• bma_axis10_val() : bma_axis.inc.h
• bma_axis14_val() : bma_axis.inc.h
• bma_axis8_val() : bma_axis.inc.h
• bmp085_bus_addr : sensor_dev.h
• BMP085_ID_VAL : bmp.h
• bmp085_init() : bmp.h , sensor_dev.h , bmp.c
• BMP085_VER_VAL : bmp.h
• bmp180_bus_addr : sensor_dev.h
• BMP180_ID_VAL : bmp.h
• bmp180_init() : bmp.h , bmp.c , sensor_dev.h
• BMP180_VER_VAL : bmp.h
• BMP_CHIP_ID : bmp.h
• BMP_CHIP_VERSION : bmp.h
• BMP_CONTROL : bmp.h
• BMP_DATA_LSB : bmp.h
• BMP_DATA_MSB : bmp.h
• BMP_DATA_XLSB : bmp.h
• bmp_device_id() : bmp.c
• BMP_EEPROM_ADDR : bmp.h
• BMP_EEPROM_SIZE_BYTES : bmp.h
• bmp_eoc_wait() : bmp.c
• bmp_get_cal_param() : bmp.c
• bmp_get_pressure() : bmp.c
• bmp_get_temperature() : bmp.c
• bmp_get_up() : bmp.c
• bmp_get_ut() : bmp.c
• bmp_ioctl() : bmp.c
• BMP_MAX_COUNTS : bmp.h
• BMP_MAX_hPa : bmp.h
• BMP_MIN_COUNTS : bmp.h
• BMP_MIN_hPa : bmp.h
• BMP_PRESS_READ : bmp.h
• bmp_read() : bmp.c
• BMP_RESET_CMD : bmp.h
• BMP_RESOLUTION : bmp.c
• bmp_set_state() : bmp.c
• BMP_SOFT_RESET : bmp.h
• BMP_TEMP_READ : bmp.h
• BMP_TWI_ADDR : bmp.h
• BO_USED_FOR_MAC_PERS_TIME : mac_internal.h
• board_init() : init.c , board.h
• BOARD_NAME : fatfs_access_example.c , app_init.h
• BOARD_QT_DEVICE_ADDRESS : qt_i2c.h
• BOARD_QT_TWI_INSTANCE : qt_i2c.h
• board_spi_select_id_t : xmega_spi/spi_master.h , xmega_usart_spi/usart_spi.h
• Bool : compiler.h
• bool : compiler.h
• BOOT_LOADER_SIZE : avr2102_rf4control/apps/zrc/terminal_tgt/app_config.h , zid/aptr/config/node_config.h , avr2102_rf4control/apps/nwk/serial_if/ncp/app_config.h , avr2102_rf4control/apps/zrc/serial_if/tgt/ncp/app_config.h , avr2102_rf4control/apps/zrc/button_ctr/app_config.h , avr2102_rf4control/lib/unit_tests/app_config.h , zid/dev/config/node_config.h , avr2102_rf4control/apps/zrc/serial_if/ctr/ncp/app_config.h
• BOOTLOADER_VERSION : conf_isp.h
• BPB_BkBootSec : ff.c
• BPB_BytsPerSec : ff.c
• BPB_ExtFlags : ff.c
• BPB_FATSz16 : ff.c
• BPB_FATSz32 : ff.c
• BPB_FSInfo : ff.c
• BPB_FSVer : ff.c
• BPB_HiddSec : ff.c
• BPB_Media : ff.c
• BPB_NumFATs : ff.c
• BPB_NumHeads : ff.c
• BPB_RootClus : ff.c
• BPB_RootEntCnt : ff.c
• BPB_RsvdSecCnt : ff.c
• BPB_SecPerClus : ff.c
• BPB_SecPerTrk : ff.c
• BPB_TotSec16 : ff.c
• BPB_TotSec32 : ff.c
• BPSK_MODE : avr2025_mac/source/tal/at86rf212/inc/at86rf212.h , avr2025_mac/source/tal/at86rf212b/inc/at86rf212b.h
• BPSK_OQPSK : avr2130_lwmesh/source/phy/at86rf212/inc/at86rf212.h , avr2130_lwmesh/source/phy/at86rf212b/inc/at86rf212b.h
• BPSK_TX_OFFSET : avr2025_mac/source/tal/at86rf212b/inc/at86rf212b.h , avr2025_mac/source/tal/at86rf212/inc/at86rf212.h
• BROADCAST : ieee_const.h
• broadcast_payload : thirdparty/wireless/avr2025_mac/apps/mac/no_beacon/coord/main.c
• BS_55AA : ff.c
• BS_BootSig : ff.c
• BS_BootSig32 : ff.c
• BS_DrvNum : ff.c
• BS_DrvNum32 : ff.c
• BS_FilSysType : ff.c
• BS_FilSysType32 : ff.c
• BS_jmpBoot : ff.c
• BS_OEMName : ff.c
• BS_VolID : ff.c
• BS_VolID32 : ff.c
• BS_VolLab : ff.c
• BS_VolLab32 : ff.c
• BT_H : applications/mxt143e_xplained_calculator_demo/widget_gui.c
• BT_POS_X : applications/mxt143e_xplained_calculator_demo/widget_gui.c
• BT_POS_Y : applications/mxt143e_xplained_calculator_demo/widget_gui.c
• BT_W : applications/mxt143e_xplained_calculator_demo/widget_gui.c
• BT_X : applications/mxt143e_xplained_calculator_demo/widget_gui.c
• BT_Y : applications/mxt143e_xplained_calculator_demo/widget_gui.c
• BTLC1000 : parts.h
• btn_string : services/wtk/example1_widgets/widget_gui.c
• buf_count : avr2102_rf4control/addons/serial_interface/serial_interface.c , avr2025_mac/addons/serial_if/src/serial_interface.c , perf_api_serial_handler.c , avr2102_rf4control/apps/zid/serial_if/serial_interface.c
• buffer : example3_xmega.c , example2_xmega_gfx.c
• buftoval : at30ts.c
• build_data_frame() : mac_mcps_data.c
• BURST_FUNC_NAME() : xmega/applications/xmega_a3bu_xplained_demo/qtouch/touch_api.h , thirdparty/qtouch/generic/include/touch_api.h , xmega/applications/xmega_a3bu_xplained_demo/qtouch/touch_api.h
• burst_increment : bma220.c
• BURST_JOIN : xmega/applications/xmega_a3bu_xplained_demo/qtouch/touch_api.h , thirdparty/qtouch/generic/include/touch_api.h
• burst_proc : xmega/applications/xmega_a3bu_xplained_demo/qtouch/touch_api.h , thirdparty/qtouch/generic/include/touch_api.h
• bus : twim.c
• bus_get() : sensor_bus.h
• bus_init() : sensor_bus.h
• bus_probe() : sensor_bus.h
• bus_put() : sensor_bus.h
• bus_read() : sensor_bus.h
• bus_reg_bitclear() : sensor_bus.h
• bus_reg_bitset() : sensor_bus.h
• bus_reg_fieldget() : sensor_bus.h , sensor_bus.c
• bus_reg_fieldset() : sensor_bus.c , sensor_bus.h
• bus_status_t : sensor_bus.h
• BUS_TYPE_PMBUS : sensor_bus.h
• BUS_TYPE_SMBUS : sensor_bus.h
• BUS_TYPE_SPI : sensor_bus.h
• bus_type_t : sensor_bus.h
• BUS_TYPE_TWI : sensor_bus.h
• BUS_TYPE_UNKNOWN : sensor_bus.h
• bus_write() : sensor_bus.h
• BUSIO_IF : sensor_platform.c
• BUSIO_OFFSET : sensor_platform.c
• BUSIO_SPEED : sensor_platform.c
• BUSIO_TYPE : sensor_platform.c
• BUSY_RX : avr2025_mac/source/tal/at86rf233/inc/at86rf233.h , avr2025_mac/source/tal/at86rf212b/inc/at86rf212b.h , at86rf232.h , avr2025_mac/source/tal/at86rf231/inc/at86rf231.h , avr2025_mac/source/tal/at86rf212/inc/at86rf212.h
• BUSY_RX_AACK : avr2025_mac/source/tal/at86rf233/inc/at86rf233.h , avr2025_mac/source/tal/at86rf231/inc/at86rf231.h , avr2025_mac/source/tal/at86rf212b/inc/at86rf212b.h , at86rf232.h , avr2025_mac/source/tal/at86rf212/inc/at86rf212.h
• BUSY_RX_AACK_NOCLK : avr2025_mac/source/tal/at86rf231/inc/at86rf231.h , avr2025_mac/source/tal/at86rf212b/inc/at86rf212b.h , avr2025_mac/source/tal/at86rf212/inc/at86rf212.h
• BUSY_TX : avr2025_mac/source/tal/at86rf212b/inc/at86rf212b.h , at86rf232.h , avr2025_mac/source/tal/at86rf233/inc/at86rf233.h , avr2025_mac/source/tal/at86rf212/inc/at86rf212.h , avr2025_mac/source/tal/at86rf231/inc/at86rf231.h
• BUSY_TX_ARET : avr2025_mac/source/tal/at86rf212b/inc/at86rf212b.h , avr2025_mac/source/tal/at86rf231/inc/at86rf231.h , at86rf232.h , avr2025_mac/source/tal/at86rf212/inc/at86rf212.h , avr2025_mac/source/tal/at86rf233/inc/at86rf233.h
• BUTTON_0 : thirdparty/wireless/avr2102_rf4control/apps/zid/dev/terminal/keyboard.h , thirdparty/wireless/avr2102_rf4control/apps/zrc/button_ctr/keyboard.h
• BUTTON_1 : thirdparty/wireless/avr2102_rf4control/apps/zid/dev/terminal/keyboard.h , thirdparty/wireless/avr2102_rf4control/apps/zrc/button_ctr/keyboard.h
• BUTTON_2 : thirdparty/wireless/avr2102_rf4control/apps/zrc/button_ctr/keyboard.h , thirdparty/wireless/avr2102_rf4control/apps/zid/dev/terminal/keyboard.h
• BUTTON_ID : services/wtk/example1_widgets/widget_gui.c , app_widget.c , services/wtk/example3_plot/widget_gui.c
• BUTTON_NEXT_ID : services/wtk/example2_icon/widget_gui.c
• button_pressed() : user_interface.c
• BUTTON_PREV_ID : services/wtk/example2_icon/widget_gui.c
• BUTTON_RELEASE_WAITING : thirdparty/wireless/avr2102_rf4control/apps/zrc/button_ctr/main.c
• BUTTON_SELECT_ID : services/wtk/example2_icon/widget_gui.c
• BUTTON_SIZE_Y : services/wtk/example1_widgets/widget_gui.c
• BUTTON_SPACING_Y : services/wtk/example1_widgets/widget_gui.c
• button_splash() : xmega/applications/xmega_a3bu_xplained_demo/main.c
• BW : bma180.h
• BW_10HZ : bma180.h
• BW_1200HZ : bma180.h
• BW_150HZ : bma180.h
• BW_20HZ : bma180.h
• BW_300HZ : bma180.h
• BW_40HZ : bma180.h
• BW_600HZ : bma180.h
• BW_75HZ : bma180.h
• BW_BAND_PASS : bma180.h
• BW_HIGH_PASS : bma180.h
• Byte : compiler.h
• BYTE : integer.h
• byte_count : aes_example2.c
• BYTE_LEN : perf_msg_const.h
• BYTE_PATTERN1 : common/drivers/nvm/unit_tests/unit_tests.c
• BYTE_PATTERN2 : common/drivers/nvm/unit_tests/unit_tests.c