    Specifies the enums and Data Structures used by the Wlan APIs.

Data Structures
struct	tstr1xAuthCredentials

struct	tstrAuth1xMschap2

struct	tstrAuth1xTls

struct	tstrAuthPsk

struct	tstrAuthWep

struct	tstrConfAutoRate
	Auto TX rate selection parameters passed to m2m_wifi_conf_auto_rate. More...

struct	tstrCyptoResp
	crypto response More...

struct	tstrEthInitParam
	Structure to hold Ethernet interface parameters. Structure is to be defined and have its attributes set, based on the application's functionality before a call is made to initialize the wi-fi operations by calling the m2m_wifi_init function. Part of the wi-fi configuration structure tstrWifiInitParam. Applications shouldn't need to define this structure, if the bypass mode is not defined. More...

struct	tstrM2MAPConfig
	This structure holds the configuration parameters for the AP mode. It should be set by the application when it requests to enable the AP operation mode. The AP mode currently supports only OPEN and WEP security. More...

struct	tstrM2MAPConfigExt
	AP Configuration Extension. More...

struct	tstrM2MAPModeConfig
	AP Configuration. More...

struct	tstrM2mBatteryVoltage
	This struct stores the battery voltage. More...

struct	tstrM2mClientState
	This struct contains the information for the PS Client state. More...

struct	tstrM2mConnCredCmn
	Wi-Fi Connect Credentials Common section. More...

struct	tstrM2mConnCredHdr
	Wi-Fi Connect Credentials Header. More...

struct	tstrM2MConnInfo
	This struct contains the connection information. More...

struct	tstrM2MDefaultConnResp
	This struct contains the response error of m2m_default_connect. More...

struct	tstrM2MDeviceNameConfig
	This struct contains the Device Name of the WINC. It is used mainly for Wi-Fi Direct device discovery and WPS device information. More...

struct	tstrM2mEnableLogs
	This struct stores logging information. More...

struct	tstrM2MGenericResp
	Generic success/error response. More...

struct	tstrM2MIPConfig
	This struct contains the static IP configuration. More...

struct	tstrM2mIpCtrlBuf
	Structure holding the incoming buffer's data size information, indicating the data size of the buffer and the remaining buffer's data size. The data of the buffer which holds the packet sent to the host when in the bypass mode, is placed in the tstrEthInitParam::au8ethRcvBuf attribute. This following information is retrieved in the host when an event M2M_WIFI_RESP_ETHERNET_RX_PACKET is received in the Wi-Fi callback function tpfAppWifiCb. More...

struct	tstrM2mIpRsvdPkt
	This struct contains the size and data offset for the received packet. More...

struct	tstrM2mLsnInt
	This struct contains the Listen Interval. It is the value of the Wi-Fi StA Listen Interval when power save is enabled. It is given in units of Beacon period. It is the number of Beacon periods the WINC can sleep before it wakes up to receive data buffered for it in the AP. More...

struct	tstrM2MMulticastMac
	This struct contains the information from the Multicast filter. More...

struct	tstrM2MProvisionInfo
	This struct contains the provisioning information obtained from the HTTP Provisioning server. More...

struct	tstrM2MProvisionModeConfig
	This struct contains the provisioning mode configuration. More...

struct	tstrM2mPsType
	This struct contains the Power Save configuration. More...

struct	tstrM2mPwrMode
	Power Mode. More...

struct	tstrM2mReqScanResult
	The Wi-Fi Scan results list is stored in firmware. This struct contains the index by which the application can request a certain scan result. More...

struct	tstrM2MScan
	This struct contains the Wi-Fi scan request. More...

struct	tstrM2mScanDone
	This struct contains the Wi-Fi scan result. More...

struct	tstrM2MScanOption
	This struct contains the configuration options for Wi-Fi scan. More...

struct	tstrM2MScanRegion
	This struct contains the Wi-Fi information for the channel regions. More...

struct	tstrM2Mservercmd
	This struct contains the information for the PS Server command. More...

struct	tstrM2mServerInit
	This struct contains the information for the PS Server initialization. More...

struct	tstrM2mSetMacAddress
	This struct contains the MAC address to be used. The WINC loads the mac address from the efuse by default to the WINC configuration memory, however, the application can overwrite the configuration memory with the mac address indicated from the Host. More...

struct	tstrM2mSlpReqTime
	This struct contains the sleep time for the Power Save request. More...

struct	tstrM2MSNTPConfig
	SNTP Client Configuration. More...

struct	tstrM2MStopScanOption
	This struct holds additional configuration options for Wi-Fi scan. More...

struct	tstrM2mTxPwrLevel
	This struct stores the Tx Power levels. More...

struct	tstrM2mWifi1xHdr
	Wi-Fi Authentication 802.1x header for parameters. The parameters (Domain, UserName, PrivateKey/Password) are appended to this structure. More...

struct	tstrM2mWifiApId
	Specify an access point (by SSID) More...

struct	tstrM2mWifiAuthInfoHdr
	Generic Wi-Fi authentication information to be sent in a separate HIF message of type M2M_WIFI_IND_CONN_PARAM (preceding M2M_WIFI_REQ_CONN). More...

struct	tstrM2mWifiConnHdr
	Wi-Fi Connect Request (new format) for use with M2M_WIFI_REQ_CONN. This structure is sent across the HIF along with the relevant auth details. One of: tstrM2mWifiPsk tstrM2mWifiWep tstrM2mWifi1xHdr If further authentication details need to be sent (such as client certificate for 1x TLS), they are sent with header tstrM2mWifiAuthInfoHdr in a preceding HIF message of type M2M_WIFI_IND_CONN_PARAM. More...

struct	tstrM2mWiFiGainIdx
	Gain Table index selection corresponding to specific WiFi region. More...

struct	tstrM2mWifiGainsParams
	Gain Values. More...

struct	tstrM2MWifiMonitorModeCtrl
	This struct contains the Wi-Fi Monitor Mode Filter. It sets the filtering criteria for WLAN packets when monitoring mode is enabled. The received packets matching the filtering parameters, are passed directly to the application. More...

struct	tstrM2mWifiPsk
	Passphrase and PSK for WPA(2) PSK. More...

struct	tstrM2mWiFiRoaming
	Roaming related information. More...

struct	tstrM2MWifiRxPacketInfo
	This struct contains the Wi-Fi RX Frame Header. The M2M application has the ability to allow Wi-Fi monitoring mode for receiving all Wi-Fi Raw frames matching a well defined filtering criteria. When a target Wi-Fi packet is received, the header information are extracted and assigned in this structure. More...

struct	tstrM2mWifiscanResult
	This struct contains the information corresponding to an AP in the scan result list identified by its order (index) in the list. More...

struct	tstrM2mWifiStateChanged
	This struct contains the Wi-Fi connection state. More...

struct	tstrM2MWifiTxPacketInfo
	This struct contains the Wi-Fi TX Packet Info. The M2M Application has the ability to compose raw Wi-Fi frames (under the application responsibility). When transmitting a Wi-Fi packet, the application must supply the firmware with this structure for sending the target frame. More...

struct	tstrM2mWifiWep
	WEP security key header. More...

struct	tstrM2mWifiWepParams

struct	tstrM2mWiFiXOSleepEnable
	Choose to keep the XO on or off over deep sleep. More...

struct	tstrM2MWPSConnect
	This struct stores the WPS configuration parameters. More...

struct	tstrM2MWPSInfo
	WPS Result. More...

struct	tstrNetworkId

struct	tstrPrng
	M2M Request PRNG. More...

struct	tstrSystemTime
	This struct contains the system time. More...

struct	tstrWifiInitParam
	Structure, holding the Wi-fi configuration attributes such as the wi-fi callback , monitoring mode callback and Ethernet parameter initialization structure. More...

Enumerations
enum	tenu1xOption { WIFI_1X_BYPASS_SERVER_AUTH, WIFI_1X_TIME_VERIF_MODE, WIFI_1X_SESSION_CACHING, WIFI_1X_SPECIFIC_ROOTCERT, WIFI_1X_BYPASS_SERVER_AUTH, WIFI_1X_SESSION_CACHING, WIFI_1X_SPECIFIC_ROOTCERT, WIFI_1X_TIME_VERIF_MODE }

enum	tenu1xOption { WIFI_1X_BYPASS_SERVER_AUTH, WIFI_1X_TIME_VERIF_MODE, WIFI_1X_SESSION_CACHING, WIFI_1X_SPECIFIC_ROOTCERT, WIFI_1X_BYPASS_SERVER_AUTH, WIFI_1X_SESSION_CACHING, WIFI_1X_SPECIFIC_ROOTCERT, WIFI_1X_TIME_VERIF_MODE }

enum	tenuCredStoreOption { WIFI_CRED_DONTSAVE, WIFI_CRED_SAVE_UNENCRYPTED, WIFI_CRED_SAVE_ENCRYPTED, WIFI_CRED_DONTSAVE, WIFI_CRED_SAVE_UNENCRYPTED, WIFI_CRED_SAVE_ENCRYPTED }

enum	tenuCredStoreOption { WIFI_CRED_DONTSAVE, WIFI_CRED_SAVE_UNENCRYPTED, WIFI_CRED_SAVE_ENCRYPTED, WIFI_CRED_DONTSAVE, WIFI_CRED_SAVE_UNENCRYPTED, WIFI_CRED_SAVE_ENCRYPTED }

enum	tenuFlashLUTEntryID { ENTRY_ID_FW = 0x0011, ENTRY_ID_PLLGAIN = 0x0021, ENTRY_ID_TLSROOT = 0x0031, ENTRY_ID_TLSCLIENT = 0x0032, ENTRY_ID_TLSSERVER = 0x0033, ENTRY_ID_CONNPARAMS = 0x0034, ENTRY_ID_HTTPFILES = 0x0035, ENTRY_ID_TLSCOMMON = 0x0036, ENTRY_ID_HOSTFILE = 0x0041 }

enum	tenuM2mApCmd { M2M_WIFI_REQ_ENABLE_AP_LEGACY = M2M_AP_CMD_BASE, M2M_WIFI_REQ_DISABLE_AP, M2M_WIFI_REQ_ENABLE_AP, M2M_WIFI_MAX_AP_ALL, M2M_WIFI_REQ_ENABLE_AP = M2M_AP_CMD_BASE, M2M_WIFI_REQ_DISABLE_AP, M2M_WIFI_REQ_RESTART_AP, M2M_WIFI_MAX_AP_ALL }
	This enum contains WINC commands while in AP mode. More...

enum	tenuM2mApCmd { M2M_WIFI_REQ_ENABLE_AP_LEGACY = M2M_AP_CMD_BASE, M2M_WIFI_REQ_DISABLE_AP, M2M_WIFI_REQ_ENABLE_AP, M2M_WIFI_MAX_AP_ALL, M2M_WIFI_REQ_ENABLE_AP = M2M_AP_CMD_BASE, M2M_WIFI_REQ_DISABLE_AP, M2M_WIFI_REQ_RESTART_AP, M2M_WIFI_MAX_AP_ALL }

enum	tenuM2mConfigCmd { M2M_WIFI_REQ_RESTART = M2M_CONFIG_CMD_BASE, M2M_WIFI_REQ_SET_MAC_ADDRESS, M2M_WIFI_REQ_CURRENT_RSSI, M2M_WIFI_RESP_CURRENT_RSSI, M2M_WIFI_REQ_RESTRICT_BLE, M2M_WIFI_REQ_UNRESTRICT_BLE, M2M_WIFI_REQ_GET_CONN_INFO, M2M_WIFI_RESP_CONN_INFO, M2M_WIFI_REQ_SET_DEVICE_NAME, M2M_WIFI_REQ_START_PROVISION_MODE_LEGACY, M2M_WIFI_RESP_PROVISION_INFO, M2M_WIFI_REQ_STOP_PROVISION_MODE, M2M_WIFI_REQ_SET_SYS_TIME, M2M_WIFI_REQ_ENABLE_SNTP_CLIENT, M2M_WIFI_REQ_DISABLE_SNTP_CLIENT, M2M_WIFI_RESP_MEMORY_RECOVER, M2M_WIFI_REQ_CUST_INFO_ELEMENT, M2M_WIFI_REQ_SCAN, M2M_WIFI_RESP_SCAN_DONE, M2M_WIFI_REQ_SCAN_RESULT, M2M_WIFI_RESP_SCAN_RESULT, M2M_WIFI_REQ_SET_SCAN_OPTION, M2M_WIFI_REQ_SET_SCAN_REGION, M2M_WIFI_REQ_SET_POWER_PROFILE, M2M_WIFI_REQ_SET_TX_POWER, M2M_WIFI_REQ_SET_BATTERY_VOLTAGE, M2M_WIFI_REQ_SET_ENABLE_LOGS, M2M_WIFI_REQ_GET_SYS_TIME, M2M_WIFI_RESP_GET_SYS_TIME, M2M_WIFI_REQ_SEND_ETHERNET_PACKET, M2M_WIFI_RESP_ETHERNET_RX_PACKET, M2M_WIFI_REQ_SET_MAC_MCAST, M2M_WIFI_REQ_BLE_API_SEND, M2M_WIFI_RESP_BLE_API_RECV, M2M_WIFI_REQ_SET_GAIN_TABLE, M2M_WIFI_RESP_SET_GAIN_TABLE, M2M_WIFI_REQ_PASSIVE_SCAN, M2M_WIFI_REQ_CONFIG_SNTP, M2M_WIFI_REQ_START_PROVISION_MODE, M2M_WIFI_MAX_CONFIG_ALL, M2M_WIFI_REQ_RESTART = M2M_CONFIG_CMD_BASE, M2M_WIFI_REQ_SET_MAC_ADDRESS, M2M_WIFI_REQ_CURRENT_RSSI, M2M_WIFI_RESP_CURRENT_RSSI, M2M_WIFI_REQ_GET_CONN_INFO, M2M_WIFI_RESP_CONN_INFO, M2M_WIFI_REQ_SET_DEVICE_NAME, M2M_WIFI_REQ_START_PROVISION_MODE, M2M_WIFI_RESP_PROVISION_INFO, M2M_WIFI_REQ_STOP_PROVISION_MODE, M2M_WIFI_REQ_SET_SYS_TIME, M2M_WIFI_REQ_ENABLE_SNTP_CLIENT, M2M_WIFI_REQ_DISABLE_SNTP_CLIENT, M2M_WIFI_RESP_MEMORY_RECOVER, M2M_WIFI_REQ_CUST_INFO_ELEMENT, M2M_WIFI_REQ_SCAN, M2M_WIFI_RESP_SCAN_DONE, M2M_WIFI_REQ_SCAN_RESULT, M2M_WIFI_RESP_SCAN_RESULT, M2M_WIFI_REQ_SET_SCAN_OPTION, M2M_WIFI_REQ_SET_SCAN_REGION, M2M_WIFI_REQ_SET_POWER_PROFILE, M2M_WIFI_REQ_SET_TX_POWER, M2M_WIFI_REQ_SET_BATTERY_VOLTAGE, M2M_WIFI_REQ_SET_ENABLE_LOGS, M2M_WIFI_REQ_GET_SYS_TIME, M2M_WIFI_RESP_GET_SYS_TIME, M2M_WIFI_REQ_SEND_ETHERNET_PACKET, M2M_WIFI_RESP_ETHERNET_RX_PACKET, M2M_WIFI_REQ_SET_MAC_MCAST, M2M_WIFI_REQ_GET_PRNG, M2M_WIFI_RESP_GET_PRNG, M2M_WIFI_REQ_SCAN_SSID_LIST, M2M_WIFI_REQ_SET_GAINS, M2M_WIFI_REQ_PASSIVE_SCAN, M2M_WIFI_REQ_CONG_AUTO_RATE, M2M_WIFI_REQ_CONFIG_SNTP, M2M_WIFI_REQ_SET_GAIN_TABLE_IDX, M2M_WIFI_REQRSP_DELETE_APID, M2M_WIFI_MAX_CONFIG_ALL }
	This enum contains host commands used to configure the WINC board. More...

enum	tenuM2mConfigCmd { M2M_WIFI_REQ_RESTART = M2M_CONFIG_CMD_BASE, M2M_WIFI_REQ_SET_MAC_ADDRESS, M2M_WIFI_REQ_CURRENT_RSSI, M2M_WIFI_RESP_CURRENT_RSSI, M2M_WIFI_REQ_RESTRICT_BLE, M2M_WIFI_REQ_UNRESTRICT_BLE, M2M_WIFI_REQ_GET_CONN_INFO, M2M_WIFI_RESP_CONN_INFO, M2M_WIFI_REQ_SET_DEVICE_NAME, M2M_WIFI_REQ_START_PROVISION_MODE_LEGACY, M2M_WIFI_RESP_PROVISION_INFO, M2M_WIFI_REQ_STOP_PROVISION_MODE, M2M_WIFI_REQ_SET_SYS_TIME, M2M_WIFI_REQ_ENABLE_SNTP_CLIENT, M2M_WIFI_REQ_DISABLE_SNTP_CLIENT, M2M_WIFI_RESP_MEMORY_RECOVER, M2M_WIFI_REQ_CUST_INFO_ELEMENT, M2M_WIFI_REQ_SCAN, M2M_WIFI_RESP_SCAN_DONE, M2M_WIFI_REQ_SCAN_RESULT, M2M_WIFI_RESP_SCAN_RESULT, M2M_WIFI_REQ_SET_SCAN_OPTION, M2M_WIFI_REQ_SET_SCAN_REGION, M2M_WIFI_REQ_SET_POWER_PROFILE, M2M_WIFI_REQ_SET_TX_POWER, M2M_WIFI_REQ_SET_BATTERY_VOLTAGE, M2M_WIFI_REQ_SET_ENABLE_LOGS, M2M_WIFI_REQ_GET_SYS_TIME, M2M_WIFI_RESP_GET_SYS_TIME, M2M_WIFI_REQ_SEND_ETHERNET_PACKET, M2M_WIFI_RESP_ETHERNET_RX_PACKET, M2M_WIFI_REQ_SET_MAC_MCAST, M2M_WIFI_REQ_BLE_API_SEND, M2M_WIFI_RESP_BLE_API_RECV, M2M_WIFI_REQ_SET_GAIN_TABLE, M2M_WIFI_RESP_SET_GAIN_TABLE, M2M_WIFI_REQ_PASSIVE_SCAN, M2M_WIFI_REQ_CONFIG_SNTP, M2M_WIFI_REQ_START_PROVISION_MODE, M2M_WIFI_MAX_CONFIG_ALL, M2M_WIFI_REQ_RESTART = M2M_CONFIG_CMD_BASE, M2M_WIFI_REQ_SET_MAC_ADDRESS, M2M_WIFI_REQ_CURRENT_RSSI, M2M_WIFI_RESP_CURRENT_RSSI, M2M_WIFI_REQ_GET_CONN_INFO, M2M_WIFI_RESP_CONN_INFO, M2M_WIFI_REQ_SET_DEVICE_NAME, M2M_WIFI_REQ_START_PROVISION_MODE, M2M_WIFI_RESP_PROVISION_INFO, M2M_WIFI_REQ_STOP_PROVISION_MODE, M2M_WIFI_REQ_SET_SYS_TIME, M2M_WIFI_REQ_ENABLE_SNTP_CLIENT, M2M_WIFI_REQ_DISABLE_SNTP_CLIENT, M2M_WIFI_RESP_MEMORY_RECOVER, M2M_WIFI_REQ_CUST_INFO_ELEMENT, M2M_WIFI_REQ_SCAN, M2M_WIFI_RESP_SCAN_DONE, M2M_WIFI_REQ_SCAN_RESULT, M2M_WIFI_RESP_SCAN_RESULT, M2M_WIFI_REQ_SET_SCAN_OPTION, M2M_WIFI_REQ_SET_SCAN_REGION, M2M_WIFI_REQ_SET_POWER_PROFILE, M2M_WIFI_REQ_SET_TX_POWER, M2M_WIFI_REQ_SET_BATTERY_VOLTAGE, M2M_WIFI_REQ_SET_ENABLE_LOGS, M2M_WIFI_REQ_GET_SYS_TIME, M2M_WIFI_RESP_GET_SYS_TIME, M2M_WIFI_REQ_SEND_ETHERNET_PACKET, M2M_WIFI_RESP_ETHERNET_RX_PACKET, M2M_WIFI_REQ_SET_MAC_MCAST, M2M_WIFI_REQ_GET_PRNG, M2M_WIFI_RESP_GET_PRNG, M2M_WIFI_REQ_SCAN_SSID_LIST, M2M_WIFI_REQ_SET_GAINS, M2M_WIFI_REQ_PASSIVE_SCAN, M2M_WIFI_REQ_CONG_AUTO_RATE, M2M_WIFI_REQ_CONFIG_SNTP, M2M_WIFI_REQ_SET_GAIN_TABLE_IDX, M2M_WIFI_REQRSP_DELETE_APID, M2M_WIFI_MAX_CONFIG_ALL }

enum	tenuM2mConnChangedErrcode { M2M_ERR_SCAN_FAIL = ((uint8)1), M2M_ERR_JOIN_FAIL, M2M_ERR_AUTH_FAIL, M2M_ERR_ASSOC_FAIL, M2M_ERR_CONN_INPROGRESS, M2M_ERR_SCAN_FAIL = ((uint8)1), M2M_ERR_JOIN_FAIL, M2M_ERR_AUTH_FAIL, M2M_ERR_ASSOC_FAIL, M2M_ERR_CONN_INPROGRESS }

enum	tenuM2mConnChangedErrcode { M2M_ERR_SCAN_FAIL = ((uint8)1), M2M_ERR_JOIN_FAIL, M2M_ERR_AUTH_FAIL, M2M_ERR_ASSOC_FAIL, M2M_ERR_CONN_INPROGRESS, M2M_ERR_SCAN_FAIL = ((uint8)1), M2M_ERR_JOIN_FAIL, M2M_ERR_AUTH_FAIL, M2M_ERR_ASSOC_FAIL, M2M_ERR_CONN_INPROGRESS }

enum	tenuM2mConnState { M2M_WIFI_DISCONNECTED = 0, M2M_WIFI_CONNECTED, M2M_WIFI_ROAMED, M2M_WIFI_UNDEF = 0xff, M2M_WIFI_DISCONNECTED = 0, M2M_WIFI_CONNECTED, M2M_WIFI_ROAMED, M2M_WIFI_UNDEF = 0xff }
	This enum contains all the Wi-Fi connection states. More...

enum	tenuM2mConnState { M2M_WIFI_DISCONNECTED = 0, M2M_WIFI_CONNECTED, M2M_WIFI_ROAMED, M2M_WIFI_UNDEF = 0xff, M2M_WIFI_DISCONNECTED = 0, M2M_WIFI_CONNECTED, M2M_WIFI_ROAMED, M2M_WIFI_UNDEF = 0xff }

enum	tenuM2mCryptoCmd { M2M_CRYPTO_REQ_SHA256_INIT = M2M_CRYPTO_CMD_BASE, M2M_CRYPTO_RESP_SHA256_INIT, M2M_CRYPTO_REQ_SHA256_UPDATE, M2M_CRYPTO_RESP_SHA256_UPDATE, M2M_CRYPTO_REQ_SHA256_FINISH, M2M_CRYPTO_RESP_SHA256_FINISH, M2M_CRYPTO_REQ_RSA_SIGN_GEN, M2M_CRYPTO_RESP_RSA_SIGN_GEN, M2M_CRYPTO_REQ_RSA_SIGN_VERIFY, M2M_CRYPTO_RESP_RSA_SIGN_VERIFY, M2M_CRYPTO_MAX_ALL }

enum	tenuM2mDefaultConnErrcode { M2M_DEFAULT_CONN_INPROGRESS = ((sint8)-23), M2M_DEFAULT_CONN_FAIL, M2M_DEFAULT_CONN_SCAN_MISMATCH, M2M_DEFAULT_CONN_EMPTY_LIST, M2M_DEFAULT_CONN_INPROGRESS = ((sint8)-23), M2M_DEFAULT_CONN_FAIL, M2M_DEFAULT_CONN_SCAN_MISMATCH, M2M_DEFAULT_CONN_EMPTY_LIST }

enum	tenuM2mDefaultConnErrcode { M2M_DEFAULT_CONN_INPROGRESS = ((sint8)-23), M2M_DEFAULT_CONN_FAIL, M2M_DEFAULT_CONN_SCAN_MISMATCH, M2M_DEFAULT_CONN_EMPTY_LIST, M2M_DEFAULT_CONN_INPROGRESS = ((sint8)-23), M2M_DEFAULT_CONN_FAIL, M2M_DEFAULT_CONN_SCAN_MISMATCH, M2M_DEFAULT_CONN_EMPTY_LIST }

enum	tenuM2mGenCmd { M2M_WIFI_REQRSP_DELETE_APID = M2M_GEN_CMD_BASE, M2M_WIFI_REQ_ROAMING, M2M_WIFI_REQ_SCAN_SSID_LIST, M2M_WIFI_REQ_SET_STOP_SCAN_OPTION, M2M_WIFI_MAX_GEN_ALL, M2M_WIFI_REQ_ROAMING = M2M_GEN_CMD_BASE, M2M_WIFI_REQ_XO_SLEEP_ENABLE, M2M_WIFI_REQ_SET_STOP_SCAN_OPTION, M2M_WIFI_MAX_GEN_ALL }
	This enum contains additional WINC commands (overflow of previous enums). More...

enum	tenuM2mGenCmd { M2M_WIFI_REQRSP_DELETE_APID = M2M_GEN_CMD_BASE, M2M_WIFI_REQ_ROAMING, M2M_WIFI_REQ_SCAN_SSID_LIST, M2M_WIFI_REQ_SET_STOP_SCAN_OPTION, M2M_WIFI_MAX_GEN_ALL, M2M_WIFI_REQ_ROAMING = M2M_GEN_CMD_BASE, M2M_WIFI_REQ_XO_SLEEP_ENABLE, M2M_WIFI_REQ_SET_STOP_SCAN_OPTION, M2M_WIFI_MAX_GEN_ALL }

enum	tenuM2mIpCmd { M2M_IP_REQ_STATIC_IP_CONF = ((uint8) 10), M2M_IP_REQ_ENABLE_DHCP, M2M_IP_REQ_DISABLE_DHCP, M2M_IP_REQ_STATIC_IP_CONF = ((uint8) 10), M2M_IP_REQ_ENABLE_DHCP, M2M_IP_REQ_DISABLE_DHCP }
	This enum contains all the WINC commands related to IP. More...

enum	tenuM2mIpCmd { M2M_IP_REQ_STATIC_IP_CONF = ((uint8) 10), M2M_IP_REQ_ENABLE_DHCP, M2M_IP_REQ_DISABLE_DHCP, M2M_IP_REQ_STATIC_IP_CONF = ((uint8) 10), M2M_IP_REQ_ENABLE_DHCP, M2M_IP_REQ_DISABLE_DHCP }

enum	tenuM2mP2pCmd { M2M_WIFI_REQ_P2P_INT_CONNECT = M2M_P2P_CMD_BASE, M2M_WIFI_REQ_ENABLE_P2P, M2M_WIFI_REQ_DISABLE_P2P, M2M_WIFI_REQ_P2P_REPOST, M2M_WIFI_MAX_P2P_ALL }
	This enum contains WINC commands while in P2P mode. More...

enum	tenuM2mPwrMode { PWR_AUTO = ((uint8) 1), PWR_LOW1, PWR_LOW2, PWR_HIGH, PWR_AUTO = ((uint8) 1), PWR_LOW1, PWR_LOW2, PWR_HIGH }

enum	tenuM2mPwrMode { PWR_AUTO = ((uint8) 1), PWR_LOW1, PWR_LOW2, PWR_HIGH, PWR_AUTO = ((uint8) 1), PWR_LOW1, PWR_LOW2, PWR_HIGH }

enum	tenuM2mReqGroup { M2M_REQ_GROUP_MAIN = 0, M2M_REQ_GROUP_WIFI, M2M_REQ_GROUP_IP, M2M_REQ_GROUP_HIF, M2M_REQ_GROUP_OTA, M2M_REQ_GROUP_SSL, M2M_REQ_GROUP_SIGMA, M2M_REQ_GROUP_INTERNAL, M2M_REQ_GROUP_MAIN = 0, M2M_REQ_GROUP_WIFI, M2M_REQ_GROUP_IP, M2M_REQ_GROUP_HIF, M2M_REQ_GROUP_OTA, M2M_REQ_GROUP_SSL, M2M_REQ_GROUP_CRYPTO, M2M_REQ_GROUP_SIGMA, M2M_REQ_GROUP_INTERNAL }

enum	tenuM2mReqGroup { M2M_REQ_GROUP_MAIN = 0, M2M_REQ_GROUP_WIFI, M2M_REQ_GROUP_IP, M2M_REQ_GROUP_HIF, M2M_REQ_GROUP_OTA, M2M_REQ_GROUP_SSL, M2M_REQ_GROUP_SIGMA, M2M_REQ_GROUP_INTERNAL, M2M_REQ_GROUP_MAIN = 0, M2M_REQ_GROUP_WIFI, M2M_REQ_GROUP_IP, M2M_REQ_GROUP_HIF, M2M_REQ_GROUP_OTA, M2M_REQ_GROUP_SSL, M2M_REQ_GROUP_CRYPTO, M2M_REQ_GROUP_SIGMA, M2M_REQ_GROUP_INTERNAL }

enum	tenuM2mReqpkt { M2M_REQ_CONFIG_PKT, M2M_REQ_DATA_PKT = 0x80, M2M_REQ_CONFIG_PKT, M2M_REQ_DATA_PKT = 0x80 }

enum	tenuM2mReqpkt { M2M_REQ_CONFIG_PKT, M2M_REQ_DATA_PKT = 0x80, M2M_REQ_CONFIG_PKT, M2M_REQ_DATA_PKT = 0x80 }

enum	tenuM2mScanCh { M2M_WIFI_CH_1 = ((uint8) 1), M2M_WIFI_CH_2, M2M_WIFI_CH_3, M2M_WIFI_CH_4, M2M_WIFI_CH_5, M2M_WIFI_CH_6, M2M_WIFI_CH_7, M2M_WIFI_CH_8, M2M_WIFI_CH_9, M2M_WIFI_CH_10, M2M_WIFI_CH_11, M2M_WIFI_CH_12, M2M_WIFI_CH_13, M2M_WIFI_CH_14, M2M_WIFI_CH_ALL = ((uint8) 255), M2M_WIFI_CH_1 = ((uint8) 1), M2M_WIFI_CH_2, M2M_WIFI_CH_3, M2M_WIFI_CH_4, M2M_WIFI_CH_5, M2M_WIFI_CH_6, M2M_WIFI_CH_7, M2M_WIFI_CH_8, M2M_WIFI_CH_9, M2M_WIFI_CH_10, M2M_WIFI_CH_11, M2M_WIFI_CH_12, M2M_WIFI_CH_13, M2M_WIFI_CH_14, M2M_WIFI_CH_ALL = ((uint8) 255) }
	This enum contains all the Wi-Fi RF channels. More...

enum	tenuM2mScanCh { M2M_WIFI_CH_1 = ((uint8) 1), M2M_WIFI_CH_2, M2M_WIFI_CH_3, M2M_WIFI_CH_4, M2M_WIFI_CH_5, M2M_WIFI_CH_6, M2M_WIFI_CH_7, M2M_WIFI_CH_8, M2M_WIFI_CH_9, M2M_WIFI_CH_10, M2M_WIFI_CH_11, M2M_WIFI_CH_12, M2M_WIFI_CH_13, M2M_WIFI_CH_14, M2M_WIFI_CH_ALL = ((uint8) 255), M2M_WIFI_CH_1 = ((uint8) 1), M2M_WIFI_CH_2, M2M_WIFI_CH_3, M2M_WIFI_CH_4, M2M_WIFI_CH_5, M2M_WIFI_CH_6, M2M_WIFI_CH_7, M2M_WIFI_CH_8, M2M_WIFI_CH_9, M2M_WIFI_CH_10, M2M_WIFI_CH_11, M2M_WIFI_CH_12, M2M_WIFI_CH_13, M2M_WIFI_CH_14, M2M_WIFI_CH_ALL = ((uint8) 255) }

enum	tenuM2mScanRegion { REG_CH_1 = ((uint16) 1 << 0), REG_CH_2 = ((uint16) 1 << 1), REG_CH_3 = ((uint16) 1 << 2), REG_CH_4 = ((uint16) 1 << 3), REG_CH_5 = ((uint16) 1 << 4), REG_CH_6 = ((uint16) 1 << 5), REG_CH_7 = ((uint16) 1 << 6), REG_CH_8 = ((uint16) 1 << 7), REG_CH_9 = ((uint16) 1 << 8), REG_CH_10 = ((uint16) 1 << 9), REG_CH_11 = ((uint16) 1 << 10), REG_CH_12 = ((uint16) 1 << 11), REG_CH_13 = ((uint16) 1 << 12), REG_CH_14 = ((uint16) 1 << 13), REG_CH_ALL = ((uint16) 0x3FFF), NORTH_AMERICA = ((uint16) 0x7FF), EUROPE = ((uint16) 0x1FFF), ASIA = ((uint16) 0x3FFF), REG_CH_1 = ((uint16) 1 << 0), REG_CH_2 = ((uint16) 1 << 1), REG_CH_3 = ((uint16) 1 << 2), REG_CH_4 = ((uint16) 1 << 3), REG_CH_5 = ((uint16) 1 << 4), REG_CH_6 = ((uint16) 1 << 5), REG_CH_7 = ((uint16) 1 << 6), REG_CH_8 = ((uint16) 1 << 7), REG_CH_9 = ((uint16) 1 << 8), REG_CH_10 = ((uint16) 1 << 9), REG_CH_11 = ((uint16) 1 << 10), REG_CH_12 = ((uint16) 1 << 11), REG_CH_13 = ((uint16) 1 << 12), REG_CH_14 = ((uint16) 1 << 13), REG_CH_ALL = ((uint16) 0x3FFF), NORTH_AMERICA = ((uint16) 0x7FF), EUROPE = ((uint16) 0x1FFF), ASIA = ((uint16) 0x3FFF) }
	This enum contains all the Wi-Fi channel regions. More...

enum	tenuM2mScanRegion { REG_CH_1 = ((uint16) 1 << 0), REG_CH_2 = ((uint16) 1 << 1), REG_CH_3 = ((uint16) 1 << 2), REG_CH_4 = ((uint16) 1 << 3), REG_CH_5 = ((uint16) 1 << 4), REG_CH_6 = ((uint16) 1 << 5), REG_CH_7 = ((uint16) 1 << 6), REG_CH_8 = ((uint16) 1 << 7), REG_CH_9 = ((uint16) 1 << 8), REG_CH_10 = ((uint16) 1 << 9), REG_CH_11 = ((uint16) 1 << 10), REG_CH_12 = ((uint16) 1 << 11), REG_CH_13 = ((uint16) 1 << 12), REG_CH_14 = ((uint16) 1 << 13), REG_CH_ALL = ((uint16) 0x3FFF), NORTH_AMERICA = ((uint16) 0x7FF), EUROPE = ((uint16) 0x1FFF), ASIA = ((uint16) 0x3FFF), REG_CH_1 = ((uint16) 1 << 0), REG_CH_2 = ((uint16) 1 << 1), REG_CH_3 = ((uint16) 1 << 2), REG_CH_4 = ((uint16) 1 << 3), REG_CH_5 = ((uint16) 1 << 4), REG_CH_6 = ((uint16) 1 << 5), REG_CH_7 = ((uint16) 1 << 6), REG_CH_8 = ((uint16) 1 << 7), REG_CH_9 = ((uint16) 1 << 8), REG_CH_10 = ((uint16) 1 << 9), REG_CH_11 = ((uint16) 1 << 10), REG_CH_12 = ((uint16) 1 << 11), REG_CH_13 = ((uint16) 1 << 12), REG_CH_14 = ((uint16) 1 << 13), REG_CH_ALL = ((uint16) 0x3FFF), NORTH_AMERICA = ((uint16) 0x7FF), EUROPE = ((uint16) 0x1FFF), ASIA = ((uint16) 0x3FFF) }

enum	tenuM2mSecType { M2M_WIFI_SEC_INVALID = 0, M2M_WIFI_SEC_OPEN, M2M_WIFI_SEC_WPA_PSK, M2M_WIFI_SEC_WEP, M2M_WIFI_SEC_802_1X, M2M_WIFI_NUM_AUTH_TYPES, M2M_WIFI_SEC_INVALID = 0, M2M_WIFI_SEC_OPEN, M2M_WIFI_SEC_WPA_PSK, M2M_WIFI_SEC_WEP, M2M_WIFI_SEC_802_1X, M2M_WIFI_NUM_AUTH_TYPES }
	This enum contains all the supported Wi-Fi security types. More...

enum	tenuM2mSecType { M2M_WIFI_SEC_INVALID = 0, M2M_WIFI_SEC_OPEN, M2M_WIFI_SEC_WPA_PSK, M2M_WIFI_SEC_WEP, M2M_WIFI_SEC_802_1X, M2M_WIFI_NUM_AUTH_TYPES, M2M_WIFI_SEC_INVALID = 0, M2M_WIFI_SEC_OPEN, M2M_WIFI_SEC_WPA_PSK, M2M_WIFI_SEC_WEP, M2M_WIFI_SEC_802_1X, M2M_WIFI_NUM_AUTH_TYPES }

enum	tenuM2mServerCmd { M2M_WIFI_REQ_CLIENT_CTRL = M2M_SERVER_CMD_BASE, M2M_WIFI_RESP_CLIENT_INFO, M2M_WIFI_REQ_SERVER_INIT, M2M_WIFI_MAX_SERVER_ALL, M2M_WIFI_REQ_CLIENT_CTRL = M2M_SERVER_CMD_BASE, M2M_WIFI_RESP_CLIENT_INFO, M2M_WIFI_REQ_SERVER_INIT, M2M_WIFI_MAX_SERVER_ALL }
	These commands are currently not supported. More...

enum	tenuM2mServerCmd { M2M_WIFI_REQ_CLIENT_CTRL = M2M_SERVER_CMD_BASE, M2M_WIFI_RESP_CLIENT_INFO, M2M_WIFI_REQ_SERVER_INIT, M2M_WIFI_MAX_SERVER_ALL, M2M_WIFI_REQ_CLIENT_CTRL = M2M_SERVER_CMD_BASE, M2M_WIFI_RESP_CLIENT_INFO, M2M_WIFI_REQ_SERVER_INIT, M2M_WIFI_MAX_SERVER_ALL }

enum	tenuM2mSetGainsErrcode { M2M_ERR_GAIN_TABLE_INVALID = ((sint8)-10), M2M_ERR_READ_GAIN_TABLE }

enum	tenuM2mSigmaCmd { M2M_SIGMA_ENABLE = ((uint8) 3), M2M_SIGMA_TA_START, M2M_SIGMA_TA_STATS, M2M_SIGMA_TA_RECEIVE_STOP, M2M_SIGMA_ICMP_ARP, M2M_SIGMA_ICMP_RX, M2M_SIGMA_ICMP_TX, M2M_SIGMA_UDP_TX, M2M_SIGMA_UDP_TX_DEFER, M2M_SIGMA_SECURITY_POLICY, M2M_SIGMA_SET_SYSTIME, M2M_SIGMA_ENABLE = ((uint8) 3), M2M_SIGMA_TA_START, M2M_SIGMA_TA_STATS, M2M_SIGMA_TA_RECEIVE_STOP, M2M_SIGMA_ICMP_ARP, M2M_SIGMA_ICMP_RX, M2M_SIGMA_ICMP_TX, M2M_SIGMA_UDP_TX, M2M_SIGMA_UDP_TX_DEFER, M2M_SIGMA_SECURITY_POLICY, M2M_SIGMA_SET_SYSTIME }
	This enum contains all the WINC commands related to Sigma. More...

enum	tenuM2mSigmaCmd { M2M_SIGMA_ENABLE = ((uint8) 3), M2M_SIGMA_TA_START, M2M_SIGMA_TA_STATS, M2M_SIGMA_TA_RECEIVE_STOP, M2M_SIGMA_ICMP_ARP, M2M_SIGMA_ICMP_RX, M2M_SIGMA_ICMP_TX, M2M_SIGMA_UDP_TX, M2M_SIGMA_UDP_TX_DEFER, M2M_SIGMA_SECURITY_POLICY, M2M_SIGMA_SET_SYSTIME, M2M_SIGMA_ENABLE = ((uint8) 3), M2M_SIGMA_TA_START, M2M_SIGMA_TA_STATS, M2M_SIGMA_TA_RECEIVE_STOP, M2M_SIGMA_ICMP_ARP, M2M_SIGMA_ICMP_RX, M2M_SIGMA_ICMP_TX, M2M_SIGMA_UDP_TX, M2M_SIGMA_UDP_TX_DEFER, M2M_SIGMA_SECURITY_POLICY, M2M_SIGMA_SET_SYSTIME }

enum	tenuM2mSsidMode { SSID_MODE_VISIBLE = 0, SSID_MODE_HIDDEN, SSID_MODE_VISIBLE = 0, SSID_MODE_HIDDEN }

enum	tenuM2mSsidMode { SSID_MODE_VISIBLE = 0, SSID_MODE_HIDDEN, SSID_MODE_VISIBLE = 0, SSID_MODE_HIDDEN }

enum	tenuM2mStaCmd { M2M_WIFI_REQ_CONNECT = M2M_STA_CMD_BASE, M2M_WIFI_REQ_DEFAULT_CONNECT, M2M_WIFI_RESP_DEFAULT_CONNECT, M2M_WIFI_REQ_DISCONNECT, M2M_WIFI_RESP_CON_STATE_CHANGED, M2M_WIFI_REQ_SLEEP, M2M_WIFI_REQ_WPS_SCAN, M2M_WIFI_REQ_WPS, M2M_WIFI_REQ_START_WPS, M2M_WIFI_REQ_DISABLE_WPS, M2M_WIFI_REQ_DHCP_CONF, M2M_WIFI_RESP_IP_CONFIGURED, M2M_WIFI_RESP_IP_CONFLICT, M2M_WIFI_REQ_ENABLE_MONITORING, M2M_WIFI_REQ_DISABLE_MONITORING, M2M_WIFI_RESP_WIFI_RX_PACKET, M2M_WIFI_REQ_SEND_WIFI_PACKET, M2M_WIFI_REQ_LSN_INT, M2M_WIFI_REQ_DOZE, M2M_WIFI_REQ_GET_PRNG, M2M_WIFI_RESP_GET_PRNG, M2M_WIFI_REQ_CONN, M2M_WIFI_IND_CONN_PARAM, M2M_WIFI_MAX_STA_ALL, M2M_WIFI_REQ_CONNECT = M2M_STA_CMD_BASE, M2M_WIFI_REQ_DEFAULT_CONNECT, M2M_WIFI_RESP_DEFAULT_CONNECT, M2M_WIFI_REQ_DISCONNECT, M2M_WIFI_RESP_CON_STATE_CHANGED, M2M_WIFI_REQ_SLEEP, M2M_WIFI_REQ_WPS_SCAN, M2M_WIFI_REQ_WPS, M2M_WIFI_REQ_START_WPS, M2M_WIFI_REQ_DISABLE_WPS, M2M_WIFI_REQ_DHCP_CONF, M2M_WIFI_RESP_IP_CONFIGURED, M2M_WIFI_RESP_IP_CONFLICT, M2M_WIFI_REQ_ENABLE_MONITORING, M2M_WIFI_REQ_DISABLE_MONITORING, M2M_WIFI_RESP_WIFI_RX_PACKET, M2M_WIFI_REQ_SEND_WIFI_PACKET, M2M_WIFI_REQ_LSN_INT, M2M_WIFI_REQ_DOZE, M2M_WIFI_REQ_CONN, M2M_WIFI_IND_CONN_PARAM, M2M_WIFI_REQ_DHCP_FAILURE, M2M_WIFI_MAX_STA_ALL }
	This enum contains WINC commands while in Station mode. More...

enum	tenuM2mStaCmd { M2M_WIFI_REQ_CONNECT = M2M_STA_CMD_BASE, M2M_WIFI_REQ_DEFAULT_CONNECT, M2M_WIFI_RESP_DEFAULT_CONNECT, M2M_WIFI_REQ_DISCONNECT, M2M_WIFI_RESP_CON_STATE_CHANGED, M2M_WIFI_REQ_SLEEP, M2M_WIFI_REQ_WPS_SCAN, M2M_WIFI_REQ_WPS, M2M_WIFI_REQ_START_WPS, M2M_WIFI_REQ_DISABLE_WPS, M2M_WIFI_REQ_DHCP_CONF, M2M_WIFI_RESP_IP_CONFIGURED, M2M_WIFI_RESP_IP_CONFLICT, M2M_WIFI_REQ_ENABLE_MONITORING, M2M_WIFI_REQ_DISABLE_MONITORING, M2M_WIFI_RESP_WIFI_RX_PACKET, M2M_WIFI_REQ_SEND_WIFI_PACKET, M2M_WIFI_REQ_LSN_INT, M2M_WIFI_REQ_DOZE, M2M_WIFI_REQ_GET_PRNG, M2M_WIFI_RESP_GET_PRNG, M2M_WIFI_REQ_CONN, M2M_WIFI_IND_CONN_PARAM, M2M_WIFI_MAX_STA_ALL, M2M_WIFI_REQ_CONNECT = M2M_STA_CMD_BASE, M2M_WIFI_REQ_DEFAULT_CONNECT, M2M_WIFI_RESP_DEFAULT_CONNECT, M2M_WIFI_REQ_DISCONNECT, M2M_WIFI_RESP_CON_STATE_CHANGED, M2M_WIFI_REQ_SLEEP, M2M_WIFI_REQ_WPS_SCAN, M2M_WIFI_REQ_WPS, M2M_WIFI_REQ_START_WPS, M2M_WIFI_REQ_DISABLE_WPS, M2M_WIFI_REQ_DHCP_CONF, M2M_WIFI_RESP_IP_CONFIGURED, M2M_WIFI_RESP_IP_CONFLICT, M2M_WIFI_REQ_ENABLE_MONITORING, M2M_WIFI_REQ_DISABLE_MONITORING, M2M_WIFI_RESP_WIFI_RX_PACKET, M2M_WIFI_REQ_SEND_WIFI_PACKET, M2M_WIFI_REQ_LSN_INT, M2M_WIFI_REQ_DOZE, M2M_WIFI_REQ_CONN, M2M_WIFI_IND_CONN_PARAM, M2M_WIFI_REQ_DHCP_FAILURE, M2M_WIFI_MAX_STA_ALL }

enum	tenuM2mTxPwrLevel { TX_PWR_HIGH = ((uint8) 1), TX_PWR_MED, TX_PWR_LOW, TX_PWR_HIGH = ((uint8) 1), TX_PWR_MED, TX_PWR_LOW }

enum	tenuM2mTxPwrLevel { TX_PWR_HIGH = ((uint8) 1), TX_PWR_MED, TX_PWR_LOW, TX_PWR_HIGH = ((uint8) 1), TX_PWR_MED, TX_PWR_LOW }

enum	tenuM2mWepKeyIndex { M2M_WIFI_WEP_KEY_INDEX_1 = ((uint8) 1), M2M_WIFI_WEP_KEY_INDEX_2, M2M_WIFI_WEP_KEY_INDEX_3, M2M_WIFI_WEP_KEY_INDEX_4, M2M_WIFI_WEP_KEY_INDEX_1 = ((uint8) 1), M2M_WIFI_WEP_KEY_INDEX_2, M2M_WIFI_WEP_KEY_INDEX_3, M2M_WIFI_WEP_KEY_INDEX_4 }

enum	tenuM2mWepKeyIndex { M2M_WIFI_WEP_KEY_INDEX_1 = ((uint8) 1), M2M_WIFI_WEP_KEY_INDEX_2, M2M_WIFI_WEP_KEY_INDEX_3, M2M_WIFI_WEP_KEY_INDEX_4, M2M_WIFI_WEP_KEY_INDEX_1 = ((uint8) 1), M2M_WIFI_WEP_KEY_INDEX_2, M2M_WIFI_WEP_KEY_INDEX_3, M2M_WIFI_WEP_KEY_INDEX_4 }

enum	tenuM2mWifiMode { M2M_WIFI_MODE_NORMAL = ((uint8) 1), M2M_WIFI_MODE_CONFIG, M2M_WIFI_MODE_ETHERNET, M2M_WIFI_MODE_MAX, M2M_WIFI_MODE_NORMAL = ((uint8) 1), M2M_WIFI_MODE_ATE_HIGH, M2M_WIFI_MODE_ATE_LOW, M2M_WIFI_MODE_ETHERNET, M2M_WIFI_MODE_MAX }
	This enum contains all the supported Wi-Fi Operation Modes. More...

enum	tenuM2mWifiMode { M2M_WIFI_MODE_NORMAL = ((uint8) 1), M2M_WIFI_MODE_CONFIG, M2M_WIFI_MODE_ETHERNET, M2M_WIFI_MODE_MAX, M2M_WIFI_MODE_NORMAL = ((uint8) 1), M2M_WIFI_MODE_ATE_HIGH, M2M_WIFI_MODE_ATE_LOW, M2M_WIFI_MODE_ETHERNET, M2M_WIFI_MODE_MAX }

enum	tenuPowerSaveModes { M2M_NO_PS, M2M_PS_AUTOMATIC, M2M_PS_H_AUTOMATIC, M2M_PS_DEEP_AUTOMATIC, M2M_PS_MANUAL, M2M_NO_PS, M2M_PS_AUTOMATIC, M2M_PS_H_AUTOMATIC, M2M_PS_DEEP_AUTOMATIC, M2M_PS_MANUAL }
	This enum contains all the supported Wi-Fi Power Save modes. More...

enum	tenuPowerSaveModes { M2M_NO_PS, M2M_PS_AUTOMATIC, M2M_PS_H_AUTOMATIC, M2M_PS_DEEP_AUTOMATIC, M2M_PS_MANUAL, M2M_NO_PS, M2M_PS_AUTOMATIC, M2M_PS_H_AUTOMATIC, M2M_PS_DEEP_AUTOMATIC, M2M_PS_MANUAL }

enum	tenuRootCertPubKeyType { ROOT_CERT_PUBKEY_RSA = 1, ROOT_CERT_PUBKEY_ECDSA = 2, ROOT_CERT_PUBKEY_RSA = 1, ROOT_CERT_PUBKEY_ECDSA = 2 }
	This enum contains the supported public key types for TLS root certificates. More...

enum	tenuSNTPUseDHCP { SNTP_DISABLE_DHCP = 0, SNTP_ENABLE_DHCP = 1, SNTP_DISABLE_DHCP = 0, SNTP_ENABLE_DHCP = 1 }
	Use NTP server provided by the DHCP server. More...

enum	tenuSNTPUseDHCP { SNTP_DISABLE_DHCP = 0, SNTP_ENABLE_DHCP = 1, SNTP_DISABLE_DHCP = 0, SNTP_ENABLE_DHCP = 1 }

enum	tenuTlsCertExpSettings { TLS_CERT_EXP_CHECK_DISABLE, TLS_CERT_EXP_CHECK_ENABLE, TLS_CERT_EXP_CHECK_EN_IF_SYS_TIME }
	TLS Certificate Expiry Validation Options. More...

enum	tenuWifiState { WIFI_STATE_DEINIT, WIFI_STATE_INIT, WIFI_STATE_START, WIFI_STATE_DEINIT, WIFI_STATE_INIT, WIFI_STATE_START }

enum	tenuWifiState { WIFI_STATE_DEINIT, WIFI_STATE_INIT, WIFI_STATE_START, WIFI_STATE_DEINIT, WIFI_STATE_INIT, WIFI_STATE_START }
	Enumeration for Wi-Fi state The following is used to track the state of the wifi (not initialized, initialized or started) More...

enum	tenuWlanTxRate { TX_RATE_AUTO = 0xFF, TX_RATE_LOWEST = 0xFE, TX_RATE_1 = 0x00, TX_RATE_2 = 0x01, TX_RATE_5_5 = 0x02, TX_RATE_11 = 0x03, TX_RATE_6 = 0x0B, TX_RATE_9 = 0x0F, TX_RATE_12 = 0x0A, TX_RATE_18 = 0x0E, TX_RATE_24 = 0x09, TX_RATE_36 = 0x0D, TX_RATE_48 = 0x08, TX_RATE_54 = 0x0C, TX_RATE_MCS_0 = 0x80, TX_RATE_MCS_1 = 0x81, TX_RATE_MCS_2 = 0x82, TX_RATE_MCS_3 = 0x83, TX_RATE_MCS_4 = 0x84, TX_RATE_MCS_5 = 0x85, TX_RATE_MCS_6 = 0x86, TX_RATE_MCS_7 = 0x87 }
	All possible supported 802.11 WLAN TX rates. More...

enum	tenuWPSTrigger { WPS_PIN_TRIGGER = 0, WPS_PBC_TRIGGER = 4, WPS_PIN_TRIGGER = 0, WPS_PBC_TRIGGER = 4 }
	This enum contains the WPS triggering methods. More...

enum	tenuWPSTrigger { WPS_PIN_TRIGGER = 0, WPS_PBC_TRIGGER = 4, WPS_PIN_TRIGGER = 0, WPS_PBC_TRIGGER = 4 }

Functions
	_Static_assert ((sizeof(tstrM2mPwrMode)%4)==0,"Structure alignment error")

	_Static_assert ((sizeof(tstrM2mTxPwrLevel)%4)==0,"Structure alignment error")

	_Static_assert ((sizeof(tstrM2mWiFiGainIdx)%4)==0,"Structure alignment error")

	_Static_assert ((sizeof(tstrM2mEnableLogs)%4)==0,"Structure alignment error")

	_Static_assert ((sizeof(tstrM2mBatteryVoltage)%4)==0,"Structure alignment error")

	_Static_assert ((sizeof(tstrM2mWiFiRoaming)%4)==0,"Structure alignment error")

	_Static_assert ((sizeof(tstrM2mWiFiXOSleepEnable)%4)==0,"Structure alignment error")

	_Static_assert ((sizeof(tstrM2mConnCredHdr)%4)==0,"Structure alignment error")

	_Static_assert ((sizeof(tstrM2mConnCredCmn)%4)==0,"Structure alignment error")

	_Static_assert ((sizeof(tstrM2mWifiWep)%4)==0,"Structure alignment error")

	_Static_assert ((sizeof(tstrM2mWifiPsk)%4)==0,"Structure alignment error")

	_Static_assert ((sizeof(tstrM2mWifi1xHdr)%4)==0,"Structure alignment error")

	_Static_assert ((sizeof(tstrM2mWifiAuthInfoHdr)%4)==0,"Structure alignment error")

	_Static_assert ((sizeof(tstrM2mWifiConnHdr)%4)==0,"Structure alignment error")

	_Static_assert ((sizeof(tstrM2mWifiApId)%4)==0,"Structure alignment error")

	_Static_assert ((sizeof(tstrM2MGenericResp)%4)==0,"Structure alignment error")

	_Static_assert ((sizeof(tstrM2MWPSConnect)%4)==0,"Structure alignment error")

	_Static_assert ((sizeof(tstrM2MDefaultConnResp)%4)==0,"Structure alignment error")

	_Static_assert ((sizeof(tstrM2MScanOption)%4)==0,"Structure alignment error")

	_Static_assert ((sizeof(tstrM2MStopScanOption)%4)==0,"Structure alignment error")

	_Static_assert ((sizeof(tstrM2MScanRegion)%4)==0,"Structure alignment error")

	_Static_assert ((sizeof(tstrCyptoResp)%4)==0,"Structure alignment error")

	_Static_assert ((sizeof(tstrM2mScanDone)%4)==0,"Structure alignment error")

	_Static_assert ((sizeof(tstrM2mReqScanResult)%4)==0,"Structure alignment error")

	_Static_assert ((sizeof(tstrM2mWifiscanResult)%4)==0,"Structure alignment error")

	_Static_assert ((sizeof(tstrM2mWifiStateChanged)%4)==0,"Structure alignment error")

	_Static_assert ((sizeof(tstrM2mPsType)%4)==0,"Structure alignment error")

	_Static_assert ((sizeof(tstrM2mLsnInt)%4)==0,"Structure alignment error")

	_Static_assert ((sizeof(tstrM2MWifiMonitorModeCtrl)%4)==0,"Structure alignment error")

	_Static_assert ((sizeof(tstrM2MWifiRxPacketInfo)%4)==0,"Structure alignment error")

	_Static_assert ((sizeof(tstrM2MAPConfig)%4)==0,"Structure alignment error")

	_Static_assert ((sizeof(tstrM2MAPConfigExt)%4)==0,"Structure alignment error")

	_Static_assert ((sizeof(tstrM2MAPModeConfig)%4)==0,"Structure alignment error")

	_Static_assert ((sizeof(tstrM2mServerInit)%4)==0,"Structure alignment error")

	_Static_assert ((sizeof(tstrM2mClientState)%4)==0,"Structure alignment error")

	_Static_assert ((sizeof(tstrM2Mservercmd)%4)==0,"Structure alignment error")

	_Static_assert ((sizeof(tstrM2mSetMacAddress)%4)==0,"Structure alignment error")

	_Static_assert ((sizeof(tstrM2MProvisionModeConfig)%4)==0,"Structure alignment error")

	_Static_assert ((sizeof(tstrM2MConnInfo)%4)==0,"Structure alignment error")

	_Static_assert ((sizeof(tstrM2MSNTPConfig)%4)==0,"Structure alignment error")

	_Static_assert ((sizeof(tstrSystemTime)%4)==0,"Structure alignment error")

	_Static_assert ((sizeof(tstrM2MMulticastMac)%4)==0,"Structure alignment error")

	_Static_assert ((sizeof(tstrPrng)%4)==0,"Structure alignment error")

	_Static_assert ((sizeof(tstrConfAutoRate)%4)==0,"Structure alignment error")

enum tenu1xOption

Enumerator
WIFI_1X_BYPASS_SERVER_AUTH	Server authentication for 802.1x connections. Values are of type int. 0: Authenticate server; Default, Recommended. 1: Bypass server authentication.
WIFI_1X_TIME_VERIF_MODE	Mode for checking expiry of server certificate chain. Values are of type tenuTlsCertExpSettings. Default is TLS_CERT_EXP_CHECK_EN_IF_SYS_TIME.
WIFI_1X_SESSION_CACHING	TLS session caching on/off for 802.1x connections. Values are of type int. 0: Session caching off. 1: Session caching on; Default. Note that the WINC implementation of PEAPv0 does not support session caching; this setting is ignored for PEAPv0 methods.
WIFI_1X_SPECIFIC_ROOTCERT	SHA1 digest of subject name of the root certificate to be used during server authentication. Values are: 20-byte arrays: authentication is limited to this particular root certificate; Recommended 0-byte array: authentication can succeed with any certificate in the WINC root certificate store; Default.
WIFI_1X_BYPASS_SERVER_AUTH	Server authentication for 802.1x connections. Values are of type int. 0: Authenticate server; Default, Recommended. 1: Bypass server authentication.
WIFI_1X_SESSION_CACHING	TLS session caching on/off for 802.1x connections. Values are of type int. 0: Session caching off. 1: Session caching on; Default. Note that the WINC implementation of PEAPv0 does not support session caching; this setting is ignored for PEAPv0 methods.
WIFI_1X_SPECIFIC_ROOTCERT	SHA1 digest of subject name of the root certificate to be used during server authentication. Values are: 20-byte arrays: authentication is limited to this particular root certificate; Recommended 0-byte array: authentication can succeed with any certificate in the WINC root certificate store; Default.
WIFI_1X_TIME_VERIF_MODE	Mode for checking expiry of server certificate chain. Values are of type tenuSslCertExpSettings. Default is SSL_CERT_EXP_CHECK_EN_IF_SYS_TIME.

enum tenu1xOption

Remarks

Enumerator
WIFI_1X_BYPASS_SERVER_AUTH	Server authentication for 802.1x connections. Values are of type int. 0: Authenticate server; Default, Recommended. 1: Bypass server authentication.
WIFI_1X_TIME_VERIF_MODE	Mode for checking expiry of server certificate chain. Values are of type tenuTlsCertExpSettings. Default is TLS_CERT_EXP_CHECK_EN_IF_SYS_TIME.
WIFI_1X_SESSION_CACHING	TLS session caching on/off for 802.1x connections. Values are of type int. 0: Session caching off. 1: Session caching on; Default. Note that the WINC implementation of PEAPv0 does not support session caching; this setting is ignored for PEAPv0 methods.
WIFI_1X_SPECIFIC_ROOTCERT	SHA1 digest of subject name of the root certificate to be used during server authentication. Values are: 20-byte arrays: authentication is limited to this particular root certificate; Recommended 0-byte array: authentication can succeed with any certificate in the WINC root certificate store; Default.
WIFI_1X_BYPASS_SERVER_AUTH	Server authentication for 802.1x connections. Values are of type int. 0: Authenticate server; Default, Recommended. 1: Bypass server authentication.
WIFI_1X_SESSION_CACHING	TLS session caching on/off for 802.1x connections. Values are of type int. 0: Session caching off. 1: Session caching on; Default. Note that the WINC implementation of PEAPv0 does not support session caching; this setting is ignored for PEAPv0 methods.
WIFI_1X_SPECIFIC_ROOTCERT	SHA1 digest of subject name of the root certificate to be used during server authentication. Values are: 20-byte arrays: authentication is limited to this particular root certificate; Recommended 0-byte array: authentication can succeed with any certificate in the WINC root certificate store; Default.
WIFI_1X_TIME_VERIF_MODE	Mode for checking expiry of server certificate chain. Values are of type tenuSslCertExpSettings. Default is SSL_CERT_EXP_CHECK_EN_IF_SYS_TIME.

enum tenuCredStoreOption

Enumerator
WIFI_CRED_DONTSAVE	Credentials will not be stored in WINC flash.
WIFI_CRED_SAVE_UNENCRYPTED	Credentials will be stored unencrypted in WINC flash.
WIFI_CRED_SAVE_ENCRYPTED	Credentials will be stored encrypted in WINC flash. The encryption is not secure; it is merely intended to prevent sensitive information being leaked by an opportunistic read of WINC flash contents. The encryption keys involve WINC efuse contents, so WINC efuses should not be written while this option is in use.
WIFI_CRED_DONTSAVE	Credentials will not be stored in WINC flash.
WIFI_CRED_SAVE_UNENCRYPTED	Credentials will be stored unencrypted in WINC flash.
WIFI_CRED_SAVE_ENCRYPTED	Credentials will be stored encrypted in WINC flash. The encryption is not secure; it is merely intended to prevent sensitive information being leaked by an opportunistic read of WINC flash contents. The encryption keys involve WINC efuse contents, so WINC efuses should not be written while this option is in use.

enum tenuCredStoreOption

Remarks

Enumerator
WIFI_CRED_DONTSAVE	Credentials will not be stored in WINC flash.
WIFI_CRED_SAVE_UNENCRYPTED	Credentials will be stored unencrypted in WINC flash.
WIFI_CRED_SAVE_ENCRYPTED	Credentials will be stored encrypted in WINC flash. The encryption is not secure; it is merely intended to prevent sensitive information being leaked by an opportunistic read of WINC flash contents. The encryption keys involve WINC efuse contents, so WINC efuses should not be written while this option is in use.
WIFI_CRED_DONTSAVE	Credentials will not be stored in WINC flash.
WIFI_CRED_SAVE_UNENCRYPTED	Credentials will be stored unencrypted in WINC flash.
WIFI_CRED_SAVE_ENCRYPTED	Credentials will be stored encrypted in WINC flash. The encryption is not secure; it is merely intended to prevent sensitive information being leaked by an opportunistic read of WINC flash contents. The encryption keys involve WINC efuse contents, so WINC efuses should not be written while this option is in use.

enum tenuFlashLUTEntryID

Enumerator
ENTRY_ID_FW
ENTRY_ID_PLLGAIN
ENTRY_ID_TLSROOT
ENTRY_ID_TLSCLIENT
ENTRY_ID_TLSSERVER
ENTRY_ID_CONNPARAMS
ENTRY_ID_HTTPFILES
ENTRY_ID_TLSCOMMON
ENTRY_ID_HOSTFILE

enum tenuM2mApCmd

This enum contains WINC commands while in AP mode.

Enumerator
M2M_WIFI_REQ_ENABLE_AP_LEGACY	Request to enable AP mode.
M2M_WIFI_REQ_DISABLE_AP	Request to disable AP mode.
M2M_WIFI_REQ_ENABLE_AP	Request to enable AP mode.
M2M_WIFI_MAX_AP_ALL
M2M_WIFI_REQ_ENABLE_AP	Enable AP mode command.
M2M_WIFI_REQ_DISABLE_AP	Disable AP mode command.
M2M_WIFI_REQ_RESTART_AP
M2M_WIFI_MAX_AP_ALL

enum tenuM2mApCmd

Enumerator
M2M_WIFI_REQ_ENABLE_AP_LEGACY	Request to enable AP mode.
M2M_WIFI_REQ_DISABLE_AP	Request to disable AP mode.
M2M_WIFI_REQ_ENABLE_AP	Request to enable AP mode.
M2M_WIFI_MAX_AP_ALL
M2M_WIFI_REQ_ENABLE_AP	Enable AP mode command.
M2M_WIFI_REQ_DISABLE_AP	Disable AP mode command.
M2M_WIFI_REQ_RESTART_AP
M2M_WIFI_MAX_AP_ALL

enum tenuM2mConfigCmd

This enum contains host commands used to configure the WINC board.

Enumerator
M2M_WIFI_REQ_RESTART	Restart the WINC MAC layer, it's doesn't restart the IP layer.
M2M_WIFI_REQ_SET_MAC_ADDRESS	Set the WINC mac address (not possible for production effused boards).
M2M_WIFI_REQ_CURRENT_RSSI	Request the current connected AP RSSI.
M2M_WIFI_RESP_CURRENT_RSSI	Response to M2M_WIFI_REQ_CURRENT_RSSI with the RSSI value.
M2M_WIFI_REQ_RESTRICT_BLE	Request restrict ble.
M2M_WIFI_REQ_UNRESTRICT_BLE	Request unrestrict ble.
M2M_WIFI_REQ_GET_CONN_INFO	Request connection information.
M2M_WIFI_RESP_CONN_INFO	Response to M2M_WIFI_REQ_GET_CONN_INFO with the connection information.
M2M_WIFI_REQ_SET_DEVICE_NAME	Request to set WINC device name property.
M2M_WIFI_REQ_START_PROVISION_MODE_LEGACY	Request to start provisioning mode.
M2M_WIFI_RESP_PROVISION_INFO	Response to the host with the provisioning information.
M2M_WIFI_REQ_STOP_PROVISION_MODE	Request to stop provision mode.
M2M_WIFI_REQ_SET_SYS_TIME	Request to set system time.
M2M_WIFI_REQ_ENABLE_SNTP_CLIENT	Request to enable the simple network time protocol to get the time from the Internet. This is required for security purposes.
M2M_WIFI_REQ_DISABLE_SNTP_CLIENT	Request to disable the simple network time protocol for applications that do not need it.
M2M_WIFI_RESP_MEMORY_RECOVER	Reserved for debugging
M2M_WIFI_REQ_CUST_INFO_ELEMENT	Request to add custom information to the Beacons IE.
M2M_WIFI_REQ_SCAN	Request scan command.
M2M_WIFI_RESP_SCAN_DONE	Response to notify scan complete.
M2M_WIFI_REQ_SCAN_RESULT	Request for scan results.
M2M_WIFI_RESP_SCAN_RESULT	Response to provide the scan results.
M2M_WIFI_REQ_SET_SCAN_OPTION	Request to set scan options "slot time, slot number .. etc".
M2M_WIFI_REQ_SET_SCAN_REGION	Request to set scan region.
M2M_WIFI_REQ_SET_POWER_PROFILE	Request to set the Power Profile.
M2M_WIFI_REQ_SET_TX_POWER	Request to set the TX Power.
M2M_WIFI_REQ_SET_BATTERY_VOLTAGE	Request to set the Battery Voltage.
M2M_WIFI_REQ_SET_ENABLE_LOGS	Request to enable logs.
M2M_WIFI_REQ_GET_SYS_TIME	Request to get system time.
M2M_WIFI_RESP_GET_SYS_TIME	Response to retrieve the system time.
M2M_WIFI_REQ_SEND_ETHERNET_PACKET	Request to send Ethernet packet in bypass mode.
M2M_WIFI_RESP_ETHERNET_RX_PACKET	Response to receive an Ethernet packet in bypass mode.
M2M_WIFI_REQ_SET_MAC_MCAST	Request to set multicast filters.
M2M_WIFI_REQ_BLE_API_SEND	Request to send an Encapsulated BLE API MSG
M2M_WIFI_RESP_BLE_API_RECV	Response to receive an Encapsulated BLE API MSG
M2M_WIFI_REQ_SET_GAIN_TABLE	Request to use Gain table from Flash
M2M_WIFI_RESP_SET_GAIN_TABLE	Response to fail to use Gain table from Flash
M2M_WIFI_REQ_PASSIVE_SCAN	Request a passive scan.
M2M_WIFI_REQ_CONFIG_SNTP	Configure NTP servers.
M2M_WIFI_REQ_START_PROVISION_MODE	Request to start provisioning mode.
M2M_WIFI_MAX_CONFIG_ALL
M2M_WIFI_REQ_RESTART	Restart the WINC MAC layer, it's doesn't restart the IP layer.
M2M_WIFI_REQ_SET_MAC_ADDRESS	Set the WINC mac address (not possible for production effused boards).
M2M_WIFI_REQ_CURRENT_RSSI	Request the current connected AP RSSI.
M2M_WIFI_RESP_CURRENT_RSSI	Response to M2M_WIFI_REQ_CURRENT_RSSI with the RSSI value.
M2M_WIFI_REQ_GET_CONN_INFO	Request connection information command.
M2M_WIFI_RESP_CONN_INFO	Connect with default AP response.
M2M_WIFI_REQ_SET_DEVICE_NAME	Set the WINC device name property.
M2M_WIFI_REQ_START_PROVISION_MODE	Start the provisioning mode for the M2M Device.
M2M_WIFI_RESP_PROVISION_INFO	Send the provisioning information to the host.
M2M_WIFI_REQ_STOP_PROVISION_MODE	Stop the current running provision mode.
M2M_WIFI_REQ_SET_SYS_TIME	Set time of day from host.
M2M_WIFI_REQ_ENABLE_SNTP_CLIENT	Enable the simple network time protocol to get the time from the Internet. this is required for security purposes.
M2M_WIFI_REQ_DISABLE_SNTP_CLIENT	Disable the simple network time protocol for applications that do not need it.
M2M_WIFI_RESP_MEMORY_RECOVER	Reserved for debugging
M2M_WIFI_REQ_CUST_INFO_ELEMENT	Add Custom Element to Beacon Management Frame.
M2M_WIFI_REQ_SCAN	Request scan command.
M2M_WIFI_RESP_SCAN_DONE	Scan complete notification response.
M2M_WIFI_REQ_SCAN_RESULT	Request Scan results command.
M2M_WIFI_RESP_SCAN_RESULT	Request Scan results response.
M2M_WIFI_REQ_SET_SCAN_OPTION	Set Scan options "slot time, slot number .. etc" .
M2M_WIFI_REQ_SET_SCAN_REGION	Set scan region.
M2M_WIFI_REQ_SET_POWER_PROFILE	The API shall set power mode to one of 3 modes
M2M_WIFI_REQ_SET_TX_POWER	API to set TX power.
M2M_WIFI_REQ_SET_BATTERY_VOLTAGE	API to set Battery Voltage.
M2M_WIFI_REQ_SET_ENABLE_LOGS	API to set Battery Voltage.
M2M_WIFI_REQ_GET_SYS_TIME	REQ GET time of day from WINC.
M2M_WIFI_RESP_GET_SYS_TIME	RESP time of day from host.
M2M_WIFI_REQ_SEND_ETHERNET_PACKET	Send Ethernet packet in bypass mode.
M2M_WIFI_RESP_ETHERNET_RX_PACKET	Receive Ethernet packet in bypass mode.
M2M_WIFI_REQ_SET_MAC_MCAST	Set the WINC multicast filters.
M2M_WIFI_REQ_GET_PRNG	Request PRNG.
M2M_WIFI_RESP_GET_PRNG	Response for PRNG.
M2M_WIFI_REQ_SCAN_SSID_LIST	Request scan with list of hidden SSID plus the broadcast scan.
M2M_WIFI_REQ_SET_GAINS	Request to set the PPA gain
M2M_WIFI_REQ_PASSIVE_SCAN	Request a passive scan.
M2M_WIFI_REQ_CONG_AUTO_RATE	Configure auto TX rate selection algorithm.
M2M_WIFI_REQ_CONFIG_SNTP	Configure NTP servers.
M2M_WIFI_REQ_SET_GAIN_TABLE_IDX	API to set Gain table index.
M2M_WIFI_REQRSP_DELETE_APID	Request/response to delete AP security credentials from WINC flash.
M2M_WIFI_MAX_CONFIG_ALL

enum tenuM2mConfigCmd

Enumerator
M2M_WIFI_REQ_RESTART	Restart the WINC MAC layer, it's doesn't restart the IP layer.
M2M_WIFI_REQ_SET_MAC_ADDRESS	Set the WINC mac address (not possible for production effused boards).
M2M_WIFI_REQ_CURRENT_RSSI	Request the current connected AP RSSI.
M2M_WIFI_RESP_CURRENT_RSSI	Response to M2M_WIFI_REQ_CURRENT_RSSI with the RSSI value.
M2M_WIFI_REQ_RESTRICT_BLE	Request restrict ble.
M2M_WIFI_REQ_UNRESTRICT_BLE	Request unrestrict ble.
M2M_WIFI_REQ_GET_CONN_INFO	Request connection information.
M2M_WIFI_RESP_CONN_INFO	Response to M2M_WIFI_REQ_GET_CONN_INFO with the connection information.
M2M_WIFI_REQ_SET_DEVICE_NAME	Request to set WINC device name property.
M2M_WIFI_REQ_START_PROVISION_MODE_LEGACY	Request to start provisioning mode.
M2M_WIFI_RESP_PROVISION_INFO	Response to the host with the provisioning information.
M2M_WIFI_REQ_STOP_PROVISION_MODE	Request to stop provision mode.
M2M_WIFI_REQ_SET_SYS_TIME	Request to set system time.
M2M_WIFI_REQ_ENABLE_SNTP_CLIENT	Request to enable the simple network time protocol to get the time from the Internet. This is required for security purposes.
M2M_WIFI_REQ_DISABLE_SNTP_CLIENT	Request to disable the simple network time protocol for applications that do not need it.
M2M_WIFI_RESP_MEMORY_RECOVER	Reserved for debugging
M2M_WIFI_REQ_CUST_INFO_ELEMENT	Request to add custom information to the Beacons IE.
M2M_WIFI_REQ_SCAN	Request scan command.
M2M_WIFI_RESP_SCAN_DONE	Response to notify scan complete.
M2M_WIFI_REQ_SCAN_RESULT	Request for scan results.
M2M_WIFI_RESP_SCAN_RESULT	Response to provide the scan results.
M2M_WIFI_REQ_SET_SCAN_OPTION	Request to set scan options "slot time, slot number .. etc".
M2M_WIFI_REQ_SET_SCAN_REGION	Request to set scan region.
M2M_WIFI_REQ_SET_POWER_PROFILE	Request to set the Power Profile.
M2M_WIFI_REQ_SET_TX_POWER	Request to set the TX Power.
M2M_WIFI_REQ_SET_BATTERY_VOLTAGE	Request to set the Battery Voltage.
M2M_WIFI_REQ_SET_ENABLE_LOGS	Request to enable logs.
M2M_WIFI_REQ_GET_SYS_TIME	Request to get system time.
M2M_WIFI_RESP_GET_SYS_TIME	Response to retrieve the system time.
M2M_WIFI_REQ_SEND_ETHERNET_PACKET	Request to send Ethernet packet in bypass mode.
M2M_WIFI_RESP_ETHERNET_RX_PACKET	Response to receive an Ethernet packet in bypass mode.
M2M_WIFI_REQ_SET_MAC_MCAST	Request to set multicast filters.
M2M_WIFI_REQ_BLE_API_SEND	Request to send an Encapsulated BLE API MSG
M2M_WIFI_RESP_BLE_API_RECV	Response to receive an Encapsulated BLE API MSG
M2M_WIFI_REQ_SET_GAIN_TABLE	Request to use Gain table from Flash
M2M_WIFI_RESP_SET_GAIN_TABLE	Response to fail to use Gain table from Flash
M2M_WIFI_REQ_PASSIVE_SCAN	Request a passive scan.
M2M_WIFI_REQ_CONFIG_SNTP	Configure NTP servers.
M2M_WIFI_REQ_START_PROVISION_MODE	Request to start provisioning mode.
M2M_WIFI_MAX_CONFIG_ALL
M2M_WIFI_REQ_RESTART	Restart the WINC MAC layer, it's doesn't restart the IP layer.
M2M_WIFI_REQ_SET_MAC_ADDRESS	Set the WINC mac address (not possible for production effused boards).
M2M_WIFI_REQ_CURRENT_RSSI	Request the current connected AP RSSI.
M2M_WIFI_RESP_CURRENT_RSSI	Response to M2M_WIFI_REQ_CURRENT_RSSI with the RSSI value.
M2M_WIFI_REQ_GET_CONN_INFO	Request connection information command.
M2M_WIFI_RESP_CONN_INFO	Connect with default AP response.
M2M_WIFI_REQ_SET_DEVICE_NAME	Set the WINC device name property.
M2M_WIFI_REQ_START_PROVISION_MODE	Start the provisioning mode for the M2M Device.
M2M_WIFI_RESP_PROVISION_INFO	Send the provisioning information to the host.
M2M_WIFI_REQ_STOP_PROVISION_MODE	Stop the current running provision mode.
M2M_WIFI_REQ_SET_SYS_TIME	Set time of day from host.
M2M_WIFI_REQ_ENABLE_SNTP_CLIENT	Enable the simple network time protocol to get the time from the Internet. this is required for security purposes.
M2M_WIFI_REQ_DISABLE_SNTP_CLIENT	Disable the simple network time protocol for applications that do not need it.
M2M_WIFI_RESP_MEMORY_RECOVER	Reserved for debugging
M2M_WIFI_REQ_CUST_INFO_ELEMENT	Add Custom Element to Beacon Management Frame.
M2M_WIFI_REQ_SCAN	Request scan command.
M2M_WIFI_RESP_SCAN_DONE	Scan complete notification response.
M2M_WIFI_REQ_SCAN_RESULT	Request Scan results command.
M2M_WIFI_RESP_SCAN_RESULT	Request Scan results response.
M2M_WIFI_REQ_SET_SCAN_OPTION	Set Scan options "slot time, slot number .. etc" .
M2M_WIFI_REQ_SET_SCAN_REGION	Set scan region.
M2M_WIFI_REQ_SET_POWER_PROFILE	The API shall set power mode to one of 3 modes
M2M_WIFI_REQ_SET_TX_POWER	API to set TX power.
M2M_WIFI_REQ_SET_BATTERY_VOLTAGE	API to set Battery Voltage.
M2M_WIFI_REQ_SET_ENABLE_LOGS	API to set Battery Voltage.
M2M_WIFI_REQ_GET_SYS_TIME	REQ GET time of day from WINC.
M2M_WIFI_RESP_GET_SYS_TIME	RESP time of day from host.
M2M_WIFI_REQ_SEND_ETHERNET_PACKET	Send Ethernet packet in bypass mode.
M2M_WIFI_RESP_ETHERNET_RX_PACKET	Receive Ethernet packet in bypass mode.
M2M_WIFI_REQ_SET_MAC_MCAST	Set the WINC multicast filters.
M2M_WIFI_REQ_GET_PRNG	Request PRNG.
M2M_WIFI_RESP_GET_PRNG	Response for PRNG.
M2M_WIFI_REQ_SCAN_SSID_LIST	Request scan with list of hidden SSID plus the broadcast scan.
M2M_WIFI_REQ_SET_GAINS	Request to set the PPA gain
M2M_WIFI_REQ_PASSIVE_SCAN	Request a passive scan.
M2M_WIFI_REQ_CONG_AUTO_RATE	Configure auto TX rate selection algorithm.
M2M_WIFI_REQ_CONFIG_SNTP	Configure NTP servers.
M2M_WIFI_REQ_SET_GAIN_TABLE_IDX	API to set Gain table index.
M2M_WIFI_REQRSP_DELETE_APID	Request/response to delete AP security credentials from WINC flash.
M2M_WIFI_MAX_CONFIG_ALL

enum tenuM2mConnChangedErrcode

Enumerator
M2M_ERR_SCAN_FAIL	Failure to perform the scan operation.
M2M_ERR_JOIN_FAIL	Failure to join the BSS.
M2M_ERR_AUTH_FAIL	Failure to authenticate with the AP.
M2M_ERR_ASSOC_FAIL	Failure to associate with the AP.
M2M_ERR_CONN_INPROGRESS	Failure due to another connection being in progress.
M2M_ERR_SCAN_FAIL	Indicate that the WINC board has failed to perform the scan operation.
M2M_ERR_JOIN_FAIL	Indicate that the WINC board has failed to join the BSS .
M2M_ERR_AUTH_FAIL	Indicate that the WINC board has failed to authenticate with the AP.
M2M_ERR_ASSOC_FAIL	Indicate that the WINC board has failed to associate with the AP.
M2M_ERR_CONN_INPROGRESS	Indicate that the WINC board has another connection request in progress.

enum tenuM2mConnChangedErrcode

Enumerator
M2M_ERR_SCAN_FAIL	Failure to perform the scan operation.
M2M_ERR_JOIN_FAIL	Failure to join the BSS.
M2M_ERR_AUTH_FAIL	Failure to authenticate with the AP.
M2M_ERR_ASSOC_FAIL	Failure to associate with the AP.
M2M_ERR_CONN_INPROGRESS	Failure due to another connection being in progress.
M2M_ERR_SCAN_FAIL	Indicate that the WINC board has failed to perform the scan operation.
M2M_ERR_JOIN_FAIL	Indicate that the WINC board has failed to join the BSS .
M2M_ERR_AUTH_FAIL	Indicate that the WINC board has failed to authenticate with the AP.
M2M_ERR_ASSOC_FAIL	Indicate that the WINC board has failed to associate with the AP.
M2M_ERR_CONN_INPROGRESS	Indicate that the WINC board has another connection request in progress.

enum tenuM2mConnState

This enum contains all the Wi-Fi connection states.

Wi-Fi Connection State.

Enumerator
M2M_WIFI_DISCONNECTED	Wi-Fi state is disconnected.
M2M_WIFI_CONNECTED	Wi-Fi state is connected.
M2M_WIFI_ROAMED	Wi-Fi state is roamed to new AP.
M2M_WIFI_UNDEF	Undefined Wi-Fi State.
M2M_WIFI_DISCONNECTED	Wi-Fi state is disconnected.
M2M_WIFI_CONNECTED	Wi-Fi state is connected.
M2M_WIFI_ROAMED	Wi-Fi state is roamed to new AP.
M2M_WIFI_UNDEF	Undefined Wi-Fi State.

enum tenuM2mConnState

Enumerator
M2M_WIFI_DISCONNECTED	Wi-Fi state is disconnected.
M2M_WIFI_CONNECTED	Wi-Fi state is connected.
M2M_WIFI_ROAMED	Wi-Fi state is roamed to new AP.
M2M_WIFI_UNDEF	Undefined Wi-Fi State.
M2M_WIFI_DISCONNECTED	Wi-Fi state is disconnected.
M2M_WIFI_CONNECTED	Wi-Fi state is connected.
M2M_WIFI_ROAMED	Wi-Fi state is roamed to new AP.
M2M_WIFI_UNDEF	Undefined Wi-Fi State.

enum tenuM2mCryptoCmd

Enumerator
M2M_CRYPTO_REQ_SHA256_INIT
M2M_CRYPTO_RESP_SHA256_INIT
M2M_CRYPTO_REQ_SHA256_UPDATE
M2M_CRYPTO_RESP_SHA256_UPDATE
M2M_CRYPTO_REQ_SHA256_FINISH
M2M_CRYPTO_RESP_SHA256_FINISH
M2M_CRYPTO_REQ_RSA_SIGN_GEN
M2M_CRYPTO_RESP_RSA_SIGN_GEN
M2M_CRYPTO_REQ_RSA_SIGN_VERIFY
M2M_CRYPTO_RESP_RSA_SIGN_VERIFY
M2M_CRYPTO_MAX_ALL

enum tenuM2mDefaultConnErrcode

Enumerator
M2M_DEFAULT_CONN_INPROGRESS	Failure response due to another connection being already in progress
M2M_DEFAULT_CONN_FAIL	Failure to connect to the cached network
M2M_DEFAULT_CONN_SCAN_MISMATCH	Failure to find any of the cached networks in the scan results.
M2M_DEFAULT_CONN_EMPTY_LIST	Failure due to empty network list.
M2M_DEFAULT_CONN_INPROGRESS	A failure that indicates that a default connection or forced connection is in progress
M2M_DEFAULT_CONN_FAIL	A failure response that indicates that the winc failed to connect to the cached network
M2M_DEFAULT_CONN_SCAN_MISMATCH	A failure response that indicates that no one of the cached networks was found in the scan results, as a result to the function call m2m_default_connect.
M2M_DEFAULT_CONN_EMPTY_LIST	A failure response that indicates an empty network list as a result to the function call m2m_default_connect.

enum tenuM2mDefaultConnErrcode

Enumerator
M2M_DEFAULT_CONN_INPROGRESS	Failure response due to another connection being already in progress
M2M_DEFAULT_CONN_FAIL	Failure to connect to the cached network
M2M_DEFAULT_CONN_SCAN_MISMATCH	Failure to find any of the cached networks in the scan results.
M2M_DEFAULT_CONN_EMPTY_LIST	Failure due to empty network list.
M2M_DEFAULT_CONN_INPROGRESS	A failure that indicates that a default connection or forced connection is in progress
M2M_DEFAULT_CONN_FAIL	A failure response that indicates that the winc failed to connect to the cached network
M2M_DEFAULT_CONN_SCAN_MISMATCH	A failure response that indicates that no one of the cached networks was found in the scan results, as a result to the function call m2m_default_connect.
M2M_DEFAULT_CONN_EMPTY_LIST	A failure response that indicates an empty network list as a result to the function call m2m_default_connect.

enum tenuM2mGenCmd

This enum contains additional WINC commands (overflow of previous enums).

Enumerator
M2M_WIFI_REQRSP_DELETE_APID	Request/response to delete security credentials from WINC flash. (Processing matches tenuM2mConfigCmd.)
M2M_WIFI_REQ_ROAMING	Request to enable/disable wifi roaming. (Processing matches tenuM2mConfigCmd.)
M2M_WIFI_REQ_SCAN_SSID_LIST	Request scan with list of hidden SSID plus the broadcast scan.
M2M_WIFI_REQ_SET_STOP_SCAN_OPTION	Set Scan option to stop on first result. (Processing matches tenuM2mConfigCmd.)
M2M_WIFI_MAX_GEN_ALL
M2M_WIFI_REQ_ROAMING	Request to enable/disable wifi roaming. (Processing matches tenuM2mConfigCmd.)
M2M_WIFI_REQ_XO_SLEEP_ENABLE	Request to enable/disable the crystal oscillator during deep sleep. (Processing matches tenuM2mConfigCmd.)
M2M_WIFI_REQ_SET_STOP_SCAN_OPTION	Set Scan option to stop on first result. (Processing matches tenuM2mConfigCmd.)
M2M_WIFI_MAX_GEN_ALL

enum tenuM2mGenCmd

Enumerator
M2M_WIFI_REQRSP_DELETE_APID	Request/response to delete security credentials from WINC flash. (Processing matches tenuM2mConfigCmd.)
M2M_WIFI_REQ_ROAMING	Request to enable/disable wifi roaming. (Processing matches tenuM2mConfigCmd.)
M2M_WIFI_REQ_SCAN_SSID_LIST	Request scan with list of hidden SSID plus the broadcast scan.
M2M_WIFI_REQ_SET_STOP_SCAN_OPTION	Set Scan option to stop on first result. (Processing matches tenuM2mConfigCmd.)
M2M_WIFI_MAX_GEN_ALL
M2M_WIFI_REQ_ROAMING	Request to enable/disable wifi roaming. (Processing matches tenuM2mConfigCmd.)
M2M_WIFI_REQ_XO_SLEEP_ENABLE	Request to enable/disable the crystal oscillator during deep sleep. (Processing matches tenuM2mConfigCmd.)
M2M_WIFI_REQ_SET_STOP_SCAN_OPTION	Set Scan option to stop on first result. (Processing matches tenuM2mConfigCmd.)
M2M_WIFI_MAX_GEN_ALL

enum tenuM2mIpCmd

This enum contains all the WINC commands related to IP.

Enumerator
M2M_IP_REQ_STATIC_IP_CONF	Request to set static IP.
M2M_IP_REQ_ENABLE_DHCP	Request to enable DHCP.
M2M_IP_REQ_DISABLE_DHCP	Request to disable DHCP.
M2M_IP_REQ_STATIC_IP_CONF
M2M_IP_REQ_ENABLE_DHCP
M2M_IP_REQ_DISABLE_DHCP

enum tenuM2mIpCmd

Enumerator
M2M_IP_REQ_STATIC_IP_CONF	Request to set static IP.
M2M_IP_REQ_ENABLE_DHCP	Request to enable DHCP.
M2M_IP_REQ_DISABLE_DHCP	Request to disable DHCP.
M2M_IP_REQ_STATIC_IP_CONF
M2M_IP_REQ_ENABLE_DHCP
M2M_IP_REQ_DISABLE_DHCP

enum tenuM2mP2pCmd

This enum contains WINC commands while in P2P mode.

Enumerator
M2M_WIFI_REQ_P2P_INT_CONNECT	This command is for internal use by the WINC and should not be used by the host driver.
M2M_WIFI_REQ_ENABLE_P2P	Request to enable P2P mode.
M2M_WIFI_REQ_DISABLE_P2P	Request to disable P2P mode.
M2M_WIFI_REQ_P2P_REPOST	This command is for internal use by the WINC and should not be used by the host driver.
M2M_WIFI_MAX_P2P_ALL

enum tenuM2mPwrMode

Enumerator
PWR_AUTO	Automatic power mode.
PWR_LOW1	Low power mode #1. RX current 60mA.
PWR_LOW2	Low power mode #2, RX current 55mA, sensitivity is less by 3dBm
PWR_HIGH	High power mode: RX current 100mA.
PWR_AUTO	FW will decide the best power mode to use internally.
PWR_LOW1	Low power mode #1
PWR_LOW2	Low power mode #2
PWR_HIGH	High power mode

enum tenuM2mPwrMode

Enumerator
PWR_AUTO	Automatic power mode.
PWR_LOW1	Low power mode #1. RX current 60mA.
PWR_LOW2	Low power mode #2, RX current 55mA, sensitivity is less by 3dBm
PWR_HIGH	High power mode: RX current 100mA.
PWR_AUTO	FW will decide the best power mode to use internally.
PWR_LOW1	Low power mode #1
PWR_LOW2	Low power mode #2
PWR_HIGH	High power mode

enum tenuM2mReqGroup

Enumerator
M2M_REQ_GROUP_MAIN
M2M_REQ_GROUP_WIFI
M2M_REQ_GROUP_IP
M2M_REQ_GROUP_HIF
M2M_REQ_GROUP_OTA
M2M_REQ_GROUP_SSL
M2M_REQ_GROUP_SIGMA
M2M_REQ_GROUP_INTERNAL
M2M_REQ_GROUP_MAIN
M2M_REQ_GROUP_WIFI
M2M_REQ_GROUP_IP
M2M_REQ_GROUP_HIF
M2M_REQ_GROUP_OTA
M2M_REQ_GROUP_SSL
M2M_REQ_GROUP_CRYPTO
M2M_REQ_GROUP_SIGMA
M2M_REQ_GROUP_INTERNAL

enum tenuM2mReqGroup

Enumerator
M2M_REQ_GROUP_MAIN
M2M_REQ_GROUP_WIFI
M2M_REQ_GROUP_IP
M2M_REQ_GROUP_HIF
M2M_REQ_GROUP_OTA
M2M_REQ_GROUP_SSL
M2M_REQ_GROUP_SIGMA
M2M_REQ_GROUP_INTERNAL
M2M_REQ_GROUP_MAIN
M2M_REQ_GROUP_WIFI
M2M_REQ_GROUP_IP
M2M_REQ_GROUP_HIF
M2M_REQ_GROUP_OTA
M2M_REQ_GROUP_SSL
M2M_REQ_GROUP_CRYPTO
M2M_REQ_GROUP_SIGMA
M2M_REQ_GROUP_INTERNAL

enum tenuM2mReqpkt

Enumerator
M2M_REQ_CONFIG_PKT
M2M_REQ_DATA_PKT
M2M_REQ_CONFIG_PKT
M2M_REQ_DATA_PKT

enum tenuM2mReqpkt

Enumerator
M2M_REQ_CONFIG_PKT
M2M_REQ_DATA_PKT
M2M_REQ_CONFIG_PKT
M2M_REQ_DATA_PKT

enum tenuM2mScanCh

This enum contains all the Wi-Fi RF channels.

Wi-Fi RF Channels.

See Also: tstrM2MScan tstrM2MScanOption

Enumerator
M2M_WIFI_CH_1	Channel 1.
M2M_WIFI_CH_2	Channel 2.
M2M_WIFI_CH_3	Channel 3.
M2M_WIFI_CH_4	Channel 4.
M2M_WIFI_CH_5	Channel 5.
M2M_WIFI_CH_6	Channel 6.
M2M_WIFI_CH_7	Channel 7.
M2M_WIFI_CH_8	Channel 8.
M2M_WIFI_CH_9	Channel 9.
M2M_WIFI_CH_10	Channel 10.
M2M_WIFI_CH_11	Channel 11.
M2M_WIFI_CH_12	Channel 12.
M2M_WIFI_CH_13	Channel 13.
M2M_WIFI_CH_14	Channel 14.
M2M_WIFI_CH_ALL
M2M_WIFI_CH_1
M2M_WIFI_CH_2
M2M_WIFI_CH_3
M2M_WIFI_CH_4
M2M_WIFI_CH_5
M2M_WIFI_CH_6
M2M_WIFI_CH_7
M2M_WIFI_CH_8
M2M_WIFI_CH_9
M2M_WIFI_CH_10
M2M_WIFI_CH_11
M2M_WIFI_CH_12
M2M_WIFI_CH_13
M2M_WIFI_CH_14
M2M_WIFI_CH_ALL

enum tenuM2mScanCh

Enumerator
M2M_WIFI_CH_1	Channel 1.
M2M_WIFI_CH_2	Channel 2.
M2M_WIFI_CH_3	Channel 3.
M2M_WIFI_CH_4	Channel 4.
M2M_WIFI_CH_5	Channel 5.
M2M_WIFI_CH_6	Channel 6.
M2M_WIFI_CH_7	Channel 7.
M2M_WIFI_CH_8	Channel 8.
M2M_WIFI_CH_9	Channel 9.
M2M_WIFI_CH_10	Channel 10.
M2M_WIFI_CH_11	Channel 11.
M2M_WIFI_CH_12	Channel 12.
M2M_WIFI_CH_13	Channel 13.
M2M_WIFI_CH_14	Channel 14.
M2M_WIFI_CH_ALL
M2M_WIFI_CH_1
M2M_WIFI_CH_2
M2M_WIFI_CH_3
M2M_WIFI_CH_4
M2M_WIFI_CH_5
M2M_WIFI_CH_6
M2M_WIFI_CH_7
M2M_WIFI_CH_8
M2M_WIFI_CH_9
M2M_WIFI_CH_10
M2M_WIFI_CH_11
M2M_WIFI_CH_12
M2M_WIFI_CH_13
M2M_WIFI_CH_14
M2M_WIFI_CH_ALL

enum tenuM2mScanRegion

This enum contains all the Wi-Fi channel regions.

Wi-Fi RF Channels.

Enumerator
REG_CH_1	Region channel 1.
REG_CH_2	Region channel 2.
REG_CH_3	Region channel 3.
REG_CH_4	Region channel 4.
REG_CH_5	Region channel 5.
REG_CH_6	Region channel 6.
REG_CH_7	Region channel 7.
REG_CH_8	Region channel 8.
REG_CH_9	Region channel 9.
REG_CH_10	Region channel 10.
REG_CH_11	Region channel 11.
REG_CH_12	Region channel 12.
REG_CH_13	Region channel 13.
REG_CH_14	Region channel 14.
REG_CH_ALL	Region for all channels.
NORTH_AMERICA	North America region with 11 channels
EUROPE	Europe region with 13 channels
ASIA	Asia region with 14 channels
REG_CH_1
REG_CH_2
REG_CH_3
REG_CH_4
REG_CH_5
REG_CH_6
REG_CH_7
REG_CH_8
REG_CH_9
REG_CH_10
REG_CH_11
REG_CH_12
REG_CH_13
REG_CH_14
REG_CH_ALL
NORTH_AMERICA
EUROPE	11 channel
ASIA	13 channel

enum tenuM2mScanRegion

Enumerator
REG_CH_1	Region channel 1.
REG_CH_2	Region channel 2.
REG_CH_3	Region channel 3.
REG_CH_4	Region channel 4.
REG_CH_5	Region channel 5.
REG_CH_6	Region channel 6.
REG_CH_7	Region channel 7.
REG_CH_8	Region channel 8.
REG_CH_9	Region channel 9.
REG_CH_10	Region channel 10.
REG_CH_11	Region channel 11.
REG_CH_12	Region channel 12.
REG_CH_13	Region channel 13.
REG_CH_14	Region channel 14.
REG_CH_ALL	Region for all channels.
NORTH_AMERICA	North America region with 11 channels
EUROPE	Europe region with 13 channels
ASIA	Asia region with 14 channels
REG_CH_1
REG_CH_2
REG_CH_3
REG_CH_4
REG_CH_5
REG_CH_6
REG_CH_7
REG_CH_8
REG_CH_9
REG_CH_10
REG_CH_11
REG_CH_12
REG_CH_13
REG_CH_14
REG_CH_ALL
NORTH_AMERICA
EUROPE	11 channel
ASIA	13 channel

enum tenuM2mSecType

This enum contains all the supported Wi-Fi security types.

Wi-Fi Supported SSID types.

Wi-Fi Supported Security types.

This enum contains all the supported Wi-Fi SSID types.

Enumerator
M2M_WIFI_SEC_INVALID	Invalid security type.
M2M_WIFI_SEC_OPEN	Wi-Fi network is not secured.
M2M_WIFI_SEC_WPA_PSK	Wi-Fi network is secured with WPA/WPA2 personal(PSK).
M2M_WIFI_SEC_WEP	Security type WEP (40 or 104) OPEN OR SHARED.
M2M_WIFI_SEC_802_1X	Wi-Fi network is secured with WPA/WPA2 Enterprise.IEEE802.1x.
M2M_WIFI_NUM_AUTH_TYPES	Upper limit for enum value.
M2M_WIFI_SEC_INVALID	Invalid security type.
M2M_WIFI_SEC_OPEN	Wi-Fi network is not secured.
M2M_WIFI_SEC_WPA_PSK	Wi-Fi network is secured with WPA/WPA2 personal(PSK).
M2M_WIFI_SEC_WEP	Security type WEP (40 or 104) OPEN OR SHARED.
M2M_WIFI_SEC_802_1X	Wi-Fi network is secured with WPA/WPA2 Enterprise.IEEE802.1x.
M2M_WIFI_NUM_AUTH_TYPES	Upper limit for enum value.

enum tenuM2mSecType

Enumerator
M2M_WIFI_SEC_INVALID	Invalid security type.
M2M_WIFI_SEC_OPEN	Wi-Fi network is not secured.
M2M_WIFI_SEC_WPA_PSK	Wi-Fi network is secured with WPA/WPA2 personal(PSK).
M2M_WIFI_SEC_WEP	Security type WEP (40 or 104) OPEN OR SHARED.
M2M_WIFI_SEC_802_1X	Wi-Fi network is secured with WPA/WPA2 Enterprise.IEEE802.1x.
M2M_WIFI_NUM_AUTH_TYPES	Upper limit for enum value.
M2M_WIFI_SEC_INVALID	Invalid security type.
M2M_WIFI_SEC_OPEN	Wi-Fi network is not secured.
M2M_WIFI_SEC_WPA_PSK	Wi-Fi network is secured with WPA/WPA2 personal(PSK).
M2M_WIFI_SEC_WEP	Security type WEP (40 or 104) OPEN OR SHARED.
M2M_WIFI_SEC_802_1X	Wi-Fi network is secured with WPA/WPA2 Enterprise.IEEE802.1x.
M2M_WIFI_NUM_AUTH_TYPES	Upper limit for enum value.

enum tenuM2mServerCmd

These commands are currently not supported.

This enum contains WINC commands while in PS mode. These command are currently not supported.

Enumerator
M2M_WIFI_REQ_CLIENT_CTRL	Currently not supported.
M2M_WIFI_RESP_CLIENT_INFO	Currently not supported.
M2M_WIFI_REQ_SERVER_INIT	Currently not supported.
M2M_WIFI_MAX_SERVER_ALL
M2M_WIFI_REQ_CLIENT_CTRL
M2M_WIFI_RESP_CLIENT_INFO
M2M_WIFI_REQ_SERVER_INIT
M2M_WIFI_MAX_SERVER_ALL

enum tenuM2mServerCmd

Enumerator
M2M_WIFI_REQ_CLIENT_CTRL	Currently not supported.
M2M_WIFI_RESP_CLIENT_INFO	Currently not supported.
M2M_WIFI_REQ_SERVER_INIT	Currently not supported.
M2M_WIFI_MAX_SERVER_ALL
M2M_WIFI_REQ_CLIENT_CTRL
M2M_WIFI_RESP_CLIENT_INFO
M2M_WIFI_REQ_SERVER_INIT
M2M_WIFI_MAX_SERVER_ALL

enum tenuM2mSetGainsErrcode

Enumerator
M2M_ERR_GAIN_TABLE_INVALID	Failure response due to trying to use an invalid table
M2M_ERR_READ_GAIN_TABLE	Failure to read gains from flash

enum tenuM2mSigmaCmd

This enum contains all the WINC commands related to Sigma.

Enumerator
M2M_SIGMA_ENABLE	Enable Sigma.
M2M_SIGMA_TA_START	Start the traffic agent.
M2M_SIGMA_TA_STATS	Get traffic statistics.
M2M_SIGMA_TA_RECEIVE_STOP	Stop receiving from the traffic agent.
M2M_SIGMA_ICMP_ARP	Send ARP.
M2M_SIGMA_ICMP_RX	Receive ICMP.
M2M_SIGMA_ICMP_TX	Transmit ICMP.
M2M_SIGMA_UDP_TX	Transmit UDP.
M2M_SIGMA_UDP_TX_DEFER	Transmit UDP defer.
M2M_SIGMA_SECURITY_POLICY	Set security policy.
M2M_SIGMA_SET_SYSTIME	Set system time.
M2M_SIGMA_ENABLE
M2M_SIGMA_TA_START
M2M_SIGMA_TA_STATS
M2M_SIGMA_TA_RECEIVE_STOP
M2M_SIGMA_ICMP_ARP
M2M_SIGMA_ICMP_RX
M2M_SIGMA_ICMP_TX
M2M_SIGMA_UDP_TX
M2M_SIGMA_UDP_TX_DEFER
M2M_SIGMA_SECURITY_POLICY
M2M_SIGMA_SET_SYSTIME

enum tenuM2mSigmaCmd

Enumerator
M2M_SIGMA_ENABLE	Enable Sigma.
M2M_SIGMA_TA_START	Start the traffic agent.
M2M_SIGMA_TA_STATS	Get traffic statistics.
M2M_SIGMA_TA_RECEIVE_STOP	Stop receiving from the traffic agent.
M2M_SIGMA_ICMP_ARP	Send ARP.
M2M_SIGMA_ICMP_RX	Receive ICMP.
M2M_SIGMA_ICMP_TX	Transmit ICMP.
M2M_SIGMA_UDP_TX	Transmit UDP.
M2M_SIGMA_UDP_TX_DEFER	Transmit UDP defer.
M2M_SIGMA_SECURITY_POLICY	Set security policy.
M2M_SIGMA_SET_SYSTIME	Set system time.
M2M_SIGMA_ENABLE
M2M_SIGMA_TA_START
M2M_SIGMA_TA_STATS
M2M_SIGMA_TA_RECEIVE_STOP
M2M_SIGMA_ICMP_ARP
M2M_SIGMA_ICMP_RX
M2M_SIGMA_ICMP_TX
M2M_SIGMA_UDP_TX
M2M_SIGMA_UDP_TX_DEFER
M2M_SIGMA_SECURITY_POLICY
M2M_SIGMA_SET_SYSTIME

enum tenuM2mSsidMode

Enumerator
SSID_MODE_VISIBLE	SSID is visible to others.
SSID_MODE_HIDDEN	SSID is hidden.
SSID_MODE_VISIBLE	SSID is visible to others.
SSID_MODE_HIDDEN	SSID is hidden.

enum tenuM2mSsidMode

Enumerator
SSID_MODE_VISIBLE	SSID is visible to others.
SSID_MODE_HIDDEN	SSID is hidden.
SSID_MODE_VISIBLE	SSID is visible to others.
SSID_MODE_HIDDEN	SSID is hidden.

enum tenuM2mStaCmd

This enum contains WINC commands while in Station mode.

Enumerator
M2M_WIFI_REQ_CONNECT	Request to connect with a specified AP. This command is deprecated in favour of M2M_WIFI_REQ_CONN.
M2M_WIFI_REQ_DEFAULT_CONNECT	Request to connect with a cached AP.
M2M_WIFI_RESP_DEFAULT_CONNECT	Response for the default connect.
M2M_WIFI_REQ_DISCONNECT	Request to disconnect from the AP.
M2M_WIFI_RESP_CON_STATE_CHANGED	Response to indicate a change in the connection state.
M2M_WIFI_REQ_SLEEP	Request to sleep.
M2M_WIFI_REQ_WPS_SCAN	Request to WPS scan.
M2M_WIFI_REQ_WPS	Request to start WPS.
M2M_WIFI_REQ_START_WPS	This command is for internal use by the WINC and should not be used by the host driver.
M2M_WIFI_REQ_DISABLE_WPS	Request to disable WPS.
M2M_WIFI_REQ_DHCP_CONF	Response to indicate the obtained IP address.
M2M_WIFI_RESP_IP_CONFIGURED	This command is for internal use by the WINC and should not be used by the host driver.
M2M_WIFI_RESP_IP_CONFLICT	Response to indicate a conflict in obtained IP address. The user should re attempt the DHCP request.
M2M_WIFI_REQ_ENABLE_MONITORING	Request to enable monitor mode.
M2M_WIFI_REQ_DISABLE_MONITORING	Request to disable monitor mode.
M2M_WIFI_RESP_WIFI_RX_PACKET	Response to indicate a packet was received in monitor mode.
M2M_WIFI_REQ_SEND_WIFI_PACKET	Request to send a packet in monitor mode.
M2M_WIFI_REQ_LSN_INT	Request to set the listen interval.
M2M_WIFI_REQ_DOZE	Request to doze
M2M_WIFI_REQ_GET_PRNG	Request PRNG.
M2M_WIFI_RESP_GET_PRNG	Response for PRNG.
M2M_WIFI_REQ_CONN	New command to connect with AP. This replaces M2M_WIFI_REQ_CONNECT. (Firmware continues to handle M2M_WIFI_REQ_CONNECT for backwards compatibility purposes.)
M2M_WIFI_IND_CONN_PARAM	Provide extra information (such as Enterprise client certificate) required for connection.
M2M_WIFI_MAX_STA_ALL
M2M_WIFI_REQ_CONNECT	Connect with AP command. This command is deprecated in favour of M2M_WIFI_REQ_CONN.
M2M_WIFI_REQ_DEFAULT_CONNECT	Connect with default AP command.
M2M_WIFI_RESP_DEFAULT_CONNECT	Request connection information response.
M2M_WIFI_REQ_DISCONNECT	Request to disconnect from AP command.
M2M_WIFI_RESP_CON_STATE_CHANGED	Connection state changed response.
M2M_WIFI_REQ_SLEEP	Set PS mode command.
M2M_WIFI_REQ_WPS_SCAN	Request WPS scan command.
M2M_WIFI_REQ_WPS	Request WPS start command.
M2M_WIFI_REQ_START_WPS	This command is for internal use by the WINC and should not be used by the host driver.
M2M_WIFI_REQ_DISABLE_WPS	Request to disable WPS command.
M2M_WIFI_REQ_DHCP_CONF	Response indicating that IP address was obtained.
M2M_WIFI_RESP_IP_CONFIGURED	This command is for internal use by the WINC and should not be used by the host driver.
M2M_WIFI_RESP_IP_CONFLICT	Response indicating a conflict in obtained IP address. The user should re attempt the DHCP request.
M2M_WIFI_REQ_ENABLE_MONITORING	Request to enable monitor mode command.
M2M_WIFI_REQ_DISABLE_MONITORING	Request to disable monitor mode command.
M2M_WIFI_RESP_WIFI_RX_PACKET	Indicate that a packet was received in monitor mode.
M2M_WIFI_REQ_SEND_WIFI_PACKET	Send packet in monitor mode.
M2M_WIFI_REQ_LSN_INT	Set WiFi listen interval.
M2M_WIFI_REQ_DOZE	Used to force the WINC to sleep in manual PS mode.
M2M_WIFI_REQ_CONN	New command to connect with AP. This replaces M2M_WIFI_REQ_CONNECT. (Firmware continues to handle M2M_WIFI_REQ_CONNECT for backwards compatibility purposes.)
M2M_WIFI_IND_CONN_PARAM	Provide extra information (such as Enterprise client certificate) required for connection.
M2M_WIFI_REQ_DHCP_FAILURE	Response indicating that IP address could not be obtained or renewed. If the IP could not be renewed then the previous IP will continue to be used.
M2M_WIFI_MAX_STA_ALL

enum tenuM2mStaCmd

Enumerator
M2M_WIFI_REQ_CONNECT	Request to connect with a specified AP. This command is deprecated in favour of M2M_WIFI_REQ_CONN.
M2M_WIFI_REQ_DEFAULT_CONNECT	Request to connect with a cached AP.
M2M_WIFI_RESP_DEFAULT_CONNECT	Response for the default connect.
M2M_WIFI_REQ_DISCONNECT	Request to disconnect from the AP.
M2M_WIFI_RESP_CON_STATE_CHANGED	Response to indicate a change in the connection state.
M2M_WIFI_REQ_SLEEP	Request to sleep.
M2M_WIFI_REQ_WPS_SCAN	Request to WPS scan.
M2M_WIFI_REQ_WPS	Request to start WPS.
M2M_WIFI_REQ_START_WPS	This command is for internal use by the WINC and should not be used by the host driver.
M2M_WIFI_REQ_DISABLE_WPS	Request to disable WPS.
M2M_WIFI_REQ_DHCP_CONF	Response to indicate the obtained IP address.
M2M_WIFI_RESP_IP_CONFIGURED	This command is for internal use by the WINC and should not be used by the host driver.
M2M_WIFI_RESP_IP_CONFLICT	Response to indicate a conflict in obtained IP address. The user should re attempt the DHCP request.
M2M_WIFI_REQ_ENABLE_MONITORING	Request to enable monitor mode.
M2M_WIFI_REQ_DISABLE_MONITORING	Request to disable monitor mode.
M2M_WIFI_RESP_WIFI_RX_PACKET	Response to indicate a packet was received in monitor mode.
M2M_WIFI_REQ_SEND_WIFI_PACKET	Request to send a packet in monitor mode.
M2M_WIFI_REQ_LSN_INT	Request to set the listen interval.
M2M_WIFI_REQ_DOZE	Request to doze
M2M_WIFI_REQ_GET_PRNG	Request PRNG.
M2M_WIFI_RESP_GET_PRNG	Response for PRNG.
M2M_WIFI_REQ_CONN	New command to connect with AP. This replaces M2M_WIFI_REQ_CONNECT. (Firmware continues to handle M2M_WIFI_REQ_CONNECT for backwards compatibility purposes.)
M2M_WIFI_IND_CONN_PARAM	Provide extra information (such as Enterprise client certificate) required for connection.
M2M_WIFI_MAX_STA_ALL
M2M_WIFI_REQ_CONNECT	Connect with AP command. This command is deprecated in favour of M2M_WIFI_REQ_CONN.
M2M_WIFI_REQ_DEFAULT_CONNECT	Connect with default AP command.
M2M_WIFI_RESP_DEFAULT_CONNECT	Request connection information response.
M2M_WIFI_REQ_DISCONNECT	Request to disconnect from AP command.
M2M_WIFI_RESP_CON_STATE_CHANGED	Connection state changed response.
M2M_WIFI_REQ_SLEEP	Set PS mode command.
M2M_WIFI_REQ_WPS_SCAN	Request WPS scan command.
M2M_WIFI_REQ_WPS	Request WPS start command.
M2M_WIFI_REQ_START_WPS	This command is for internal use by the WINC and should not be used by the host driver.
M2M_WIFI_REQ_DISABLE_WPS	Request to disable WPS command.
M2M_WIFI_REQ_DHCP_CONF	Response indicating that IP address was obtained.
M2M_WIFI_RESP_IP_CONFIGURED	This command is for internal use by the WINC and should not be used by the host driver.
M2M_WIFI_RESP_IP_CONFLICT	Response indicating a conflict in obtained IP address. The user should re attempt the DHCP request.
M2M_WIFI_REQ_ENABLE_MONITORING	Request to enable monitor mode command.
M2M_WIFI_REQ_DISABLE_MONITORING	Request to disable monitor mode command.
M2M_WIFI_RESP_WIFI_RX_PACKET	Indicate that a packet was received in monitor mode.
M2M_WIFI_REQ_SEND_WIFI_PACKET	Send packet in monitor mode.
M2M_WIFI_REQ_LSN_INT	Set WiFi listen interval.
M2M_WIFI_REQ_DOZE	Used to force the WINC to sleep in manual PS mode.
M2M_WIFI_REQ_CONN	New command to connect with AP. This replaces M2M_WIFI_REQ_CONNECT. (Firmware continues to handle M2M_WIFI_REQ_CONNECT for backwards compatibility purposes.)
M2M_WIFI_IND_CONN_PARAM	Provide extra information (such as Enterprise client certificate) required for connection.
M2M_WIFI_REQ_DHCP_FAILURE	Response indicating that IP address could not be obtained or renewed. If the IP could not be renewed then the previous IP will continue to be used.
M2M_WIFI_MAX_STA_ALL

enum tenuM2mTxPwrLevel

Enumerator
TX_PWR_HIGH	PPA Gain 6dbm PA Gain 18dbm
TX_PWR_MED	PPA Gain 6dbm PA Gain 12dbm
TX_PWR_LOW	PPA Gain 6dbm PA Gain 6dbm
TX_PWR_HIGH	PPA Gain 6dbm PA Gain 18dbm
TX_PWR_MED	PPA Gain 6dbm PA Gain 12dbm
TX_PWR_LOW	PPA Gain 6dbm PA Gain 6dbm

enum tenuM2mTxPwrLevel

Enumerator
TX_PWR_HIGH	PPA Gain 6dbm PA Gain 18dbm
TX_PWR_MED	PPA Gain 6dbm PA Gain 12dbm
TX_PWR_LOW	PPA Gain 6dbm PA Gain 6dbm
TX_PWR_HIGH	PPA Gain 6dbm PA Gain 18dbm
TX_PWR_MED	PPA Gain 6dbm PA Gain 12dbm
TX_PWR_LOW	PPA Gain 6dbm PA Gain 6dbm

enum tenuM2mWepKeyIndex

Enumerator
M2M_WIFI_WEP_KEY_INDEX_1	Index 1 for WEP key Authentication
M2M_WIFI_WEP_KEY_INDEX_2	Index 2 for WEP key Authentication
M2M_WIFI_WEP_KEY_INDEX_3	Index 3 for WEP key Authentication
M2M_WIFI_WEP_KEY_INDEX_4	Index 4 for WEP key Authentication
M2M_WIFI_WEP_KEY_INDEX_1
M2M_WIFI_WEP_KEY_INDEX_2
M2M_WIFI_WEP_KEY_INDEX_3
M2M_WIFI_WEP_KEY_INDEX_4	Index for WEP key Authentication

enum tenuM2mWepKeyIndex

Enumerator
M2M_WIFI_WEP_KEY_INDEX_1	Index 1 for WEP key Authentication
M2M_WIFI_WEP_KEY_INDEX_2	Index 2 for WEP key Authentication
M2M_WIFI_WEP_KEY_INDEX_3	Index 3 for WEP key Authentication
M2M_WIFI_WEP_KEY_INDEX_4	Index 4 for WEP key Authentication
M2M_WIFI_WEP_KEY_INDEX_1
M2M_WIFI_WEP_KEY_INDEX_2
M2M_WIFI_WEP_KEY_INDEX_3
M2M_WIFI_WEP_KEY_INDEX_4	Index for WEP key Authentication

enum tenuM2mWifiMode

This enum contains all the supported Wi-Fi Operation Modes.

Wi-Fi Operation Mode.

Enumerator
M2M_WIFI_MODE_NORMAL	Customer firmware.
M2M_WIFI_MODE_CONFIG	Production test firmware.
M2M_WIFI_MODE_ETHERNET	Ethernet Mode
M2M_WIFI_MODE_MAX
M2M_WIFI_MODE_NORMAL	Normal Mode means to run customer firmware version.
M2M_WIFI_MODE_ATE_HIGH	Config Mode in HIGH POWER means to run production test firmware version which is known as ATE (Burst) firmware.
M2M_WIFI_MODE_ATE_LOW	Config Mode in LOW POWER means to run production test firmware version which is known as ATE (Burst) firmware.
M2M_WIFI_MODE_ETHERNET	ethernet Mode
M2M_WIFI_MODE_MAX

enum tenuM2mWifiMode

Enumerator
M2M_WIFI_MODE_NORMAL	Customer firmware.
M2M_WIFI_MODE_CONFIG	Production test firmware.
M2M_WIFI_MODE_ETHERNET	Ethernet Mode
M2M_WIFI_MODE_MAX
M2M_WIFI_MODE_NORMAL	Normal Mode means to run customer firmware version.
M2M_WIFI_MODE_ATE_HIGH	Config Mode in HIGH POWER means to run production test firmware version which is known as ATE (Burst) firmware.
M2M_WIFI_MODE_ATE_LOW	Config Mode in LOW POWER means to run production test firmware version which is known as ATE (Burst) firmware.
M2M_WIFI_MODE_ETHERNET	ethernet Mode
M2M_WIFI_MODE_MAX

enum tenuPowerSaveModes

This enum contains all the supported Wi-Fi Power Save modes.

Power Save Modes.

Enumerator
M2M_NO_PS	Power save is disabled.
M2M_PS_AUTOMATIC
M2M_PS_H_AUTOMATIC	This powersave mode is not supported on WINC3400
M2M_PS_DEEP_AUTOMATIC	This powersave mode is not supported on WINC3400 Power save is done automatically by the WINC. Achieves the highest possible power save.
M2M_PS_MANUAL	This powersave mode is not supported on WINC3400
M2M_NO_PS	Power save is disabled.
M2M_PS_AUTOMATIC	Power save is done automatically by the WINC. This mode doesn't disable all of the WINC modules and use higher amount of power than the H_AUTOMATIC and the DEEP_AUTOMATIC modes..
M2M_PS_H_AUTOMATIC	Power save is done automatically by the WINC. Achieve higher power save than the AUTOMATIC mode by shutting down more parts of the WINC board.
M2M_PS_DEEP_AUTOMATIC	Power save is done automatically by the WINC. Achieve the highest possible power save.
M2M_PS_MANUAL	Power save is done manually by the user.

enum tenuPowerSaveModes

Enumerator
M2M_NO_PS	Power save is disabled.
M2M_PS_AUTOMATIC
M2M_PS_H_AUTOMATIC	This powersave mode is not supported on WINC3400
M2M_PS_DEEP_AUTOMATIC	This powersave mode is not supported on WINC3400 Power save is done automatically by the WINC. Achieves the highest possible power save.
M2M_PS_MANUAL	This powersave mode is not supported on WINC3400
M2M_NO_PS	Power save is disabled.
M2M_PS_AUTOMATIC	Power save is done automatically by the WINC. This mode doesn't disable all of the WINC modules and use higher amount of power than the H_AUTOMATIC and the DEEP_AUTOMATIC modes..
M2M_PS_H_AUTOMATIC	Power save is done automatically by the WINC. Achieve higher power save than the AUTOMATIC mode by shutting down more parts of the WINC board.
M2M_PS_DEEP_AUTOMATIC	Power save is done automatically by the WINC. Achieve the highest possible power save.
M2M_PS_MANUAL	Power save is done manually by the user.

enum tenuRootCertPubKeyType

This enum contains the supported public key types for TLS root certificates.

Enumerator
ROOT_CERT_PUBKEY_RSA	RSA public key.
ROOT_CERT_PUBKEY_ECDSA	ECDSA public key.
ROOT_CERT_PUBKEY_RSA
ROOT_CERT_PUBKEY_ECDSA

enum tenuSNTPUseDHCP

Use NTP server provided by the DHCP server.

Enumerator
SNTP_DISABLE_DHCP	Don't use the NTP server provided by the DHCP server when falling back.
SNTP_ENABLE_DHCP	Use the NTP server provided by the DHCP server when falling back.
SNTP_DISABLE_DHCP	Don't use the NTP server provided by the DHCP server when falling back.
SNTP_ENABLE_DHCP	Use the NTP server provided by the DHCP server when falling back.

enum tenuSNTPUseDHCP

Enumerator
SNTP_DISABLE_DHCP	Don't use the NTP server provided by the DHCP server when falling back.
SNTP_ENABLE_DHCP	Use the NTP server provided by the DHCP server when falling back.
SNTP_DISABLE_DHCP	Don't use the NTP server provided by the DHCP server when falling back.
SNTP_ENABLE_DHCP	Use the NTP server provided by the DHCP server when falling back.

enum tenuTlsCertExpSettings

TLS Certificate Expiry Validation Options.

Remarks

Enumerator
TLS_CERT_EXP_CHECK_DISABLE	Certificate expiry is not checked. Server authentication does not depend on expiry of certificates.
TLS_CERT_EXP_CHECK_ENABLE	Certificate expiry is checked and current time is required. Server authentication fails if a certificate has expired or the current time is unknown.
TLS_CERT_EXP_CHECK_EN_IF_SYS_TIME	Certificate expiry is only checked if current time is known. Server authentication fails if a certificate has expired; passes if the current time is unknown.

enum tenuWifiState

Enumerator
WIFI_STATE_DEINIT	Wifi is not initialized
WIFI_STATE_INIT	Wifi has been initialized. WINC flash access is possible via m2m_flash APIs.
WIFI_STATE_START	Wifi has started
WIFI_STATE_DEINIT	Wifi is not initialized
WIFI_STATE_INIT	Wifi has been initialized
WIFI_STATE_START	Wifi has started

enum tenuWifiState

Enumeration for Wi-Fi state The following is used to track the state of the wifi (not initialized, initialized or started)

Remarks: This is useful when putting the WINC in "download mode" to access the flash via SPI. By using m2m_wifi_get_state and checking against the desired state, it is possible to validate if the Application can proceed with the WINC flash access or not.; This is useful when putting the WINC in "download mode" to access the flash via SPI. By using m2m_wifi_get_state and checking against the desired state, it is possible to validate if the Application should proceed with the SPI Flash access or not.

Enumerator
WIFI_STATE_DEINIT	Wifi is not initialized
WIFI_STATE_INIT	Wifi has been initialized. WINC flash access is possible via m2m_flash APIs.
WIFI_STATE_START	Wifi has started
WIFI_STATE_DEINIT	Wifi is not initialized
WIFI_STATE_INIT	Wifi has been initialized
WIFI_STATE_START	Wifi has started

enum tenuWlanTxRate

All possible supported 802.11 WLAN TX rates.

Enumerator
TX_RATE_AUTO	Automatic rate selection
TX_RATE_LOWEST	Force the lowest possible data rate for longest range.
TX_RATE_1
TX_RATE_2
TX_RATE_5_5
TX_RATE_11
TX_RATE_6
TX_RATE_9
TX_RATE_12
TX_RATE_18
TX_RATE_24
TX_RATE_36
TX_RATE_48
TX_RATE_54
TX_RATE_MCS_0
TX_RATE_MCS_1
TX_RATE_MCS_2
TX_RATE_MCS_3
TX_RATE_MCS_4
TX_RATE_MCS_5
TX_RATE_MCS_6
TX_RATE_MCS_7

enum tenuWPSTrigger

This enum contains the WPS triggering methods.

WPS Triggering Methods.

Enumerator
WPS_PIN_TRIGGER	WPS is triggered in PIN method.
WPS_PBC_TRIGGER	WPS is triggered via push button.
WPS_PIN_TRIGGER	WPS is triggered in PIN method.
WPS_PBC_TRIGGER	WPS is triggered via push button.

enum tenuWPSTrigger

Enumerator
WPS_PIN_TRIGGER	WPS is triggered in PIN method.
WPS_PBC_TRIGGER	WPS is triggered via push button.
WPS_PIN_TRIGGER	WPS is triggered in PIN method.
WPS_PBC_TRIGGER	WPS is triggered via push button.

_Static_assert	(	(sizeof(tstrM2mPwrMode)%4)	= `=0`,
		"Structure alignment error"
	)

_Static_assert	(	(sizeof(tstrM2mTxPwrLevel)%4)	= `=0`,
		"Structure alignment error"
	)

_Static_assert	(	(sizeof(tstrM2mWiFiGainIdx)%4)	= `=0`,
		"Structure alignment error"
	)

_Static_assert	(	(sizeof(tstrM2mEnableLogs)%4)	= `=0`,
		"Structure alignment error"
	)

_Static_assert	(	(sizeof(tstrM2mBatteryVoltage)%4)	= `=0`,
		"Structure alignment error"
	)

_Static_assert	(	(sizeof(tstrM2mWiFiRoaming)%4)	= `=0`,
		"Structure alignment error"
	)

_Static_assert	(	(sizeof(tstrM2mWiFiXOSleepEnable)%4)	= `=0`,
		"Structure alignment error"
	)

_Static_assert	(	(sizeof(tstrM2mConnCredHdr)%4)	= `=0`,
		"Structure alignment error"
	)

_Static_assert	(	(sizeof(tstrM2mConnCredCmn)%4)	= `=0`,
		"Structure alignment error"
	)

_Static_assert	(	(sizeof(tstrM2mWifiWep)%4)	= `=0`,
		"Structure alignment error"
	)

_Static_assert	(	(sizeof(tstrM2mWifiPsk)%4)	= `=0`,
		"Structure alignment error"
	)

_Static_assert	(	(sizeof(tstrM2mWifi1xHdr)%4)	= `=0`,
		"Structure alignment error"
	)

_Static_assert	(	(sizeof(tstrM2mWifiAuthInfoHdr)%4)	= `=0`,
		"Structure alignment error"
	)

_Static_assert	(	(sizeof(tstrM2mWifiConnHdr)%4)	= `=0`,
		"Structure alignment error"
	)

_Static_assert	(	(sizeof(tstrM2mWifiApId)%4)	= `=0`,
		"Structure alignment error"
	)

_Static_assert	(	(sizeof(tstrM2MGenericResp)%4)	= `=0`,
		"Structure alignment error"
	)

_Static_assert	(	(sizeof(tstrM2MWPSConnect)%4)	= `=0`,
		"Structure alignment error"
	)

_Static_assert	(	(sizeof(tstrM2MDefaultConnResp)%4)	= `=0`,
		"Structure alignment error"
	)

_Static_assert	(	(sizeof(tstrM2MScanOption)%4)	= `=0`,
		"Structure alignment error"
	)

_Static_assert	(	(sizeof(tstrM2MStopScanOption)%4)	= `=0`,
		"Structure alignment error"
	)

_Static_assert	(	(sizeof(tstrM2MScanRegion)%4)	= `=0`,
		"Structure alignment error"
	)

_Static_assert	(	(sizeof(tstrCyptoResp)%4)	= `=0`,
		"Structure alignment error"
	)

_Static_assert	(	(sizeof(tstrM2mScanDone)%4)	= `=0`,
		"Structure alignment error"
	)

_Static_assert	(	(sizeof(tstrM2mReqScanResult)%4)	= `=0`,
		"Structure alignment error"
	)

_Static_assert	(	(sizeof(tstrM2mWifiscanResult)%4)	= `=0`,
		"Structure alignment error"
	)

_Static_assert	(	(sizeof(tstrM2mWifiStateChanged)%4)	= `=0`,
		"Structure alignment error"
	)

_Static_assert	(	(sizeof(tstrM2mPsType)%4)	= `=0`,
		"Structure alignment error"
	)

_Static_assert	(	(sizeof(tstrM2mLsnInt)%4)	= `=0`,
		"Structure alignment error"
	)

_Static_assert	(	(sizeof(tstrM2MWifiMonitorModeCtrl)%4)	= `=0`,
		"Structure alignment error"
	)

_Static_assert	(	(sizeof(tstrM2MWifiRxPacketInfo)%4)	= `=0`,
		"Structure alignment error"
	)

_Static_assert	(	(sizeof(tstrM2MAPConfig)%4)	= `=0`,
		"Structure alignment error"
	)

_Static_assert	(	(sizeof(tstrM2MAPConfigExt)%4)	= `=0`,
		"Structure alignment error"
	)

_Static_assert	(	(sizeof(tstrM2MAPModeConfig)%4)	= `=0`,
		"Structure alignment error"
	)

_Static_assert	(	(sizeof(tstrM2mServerInit)%4)	= `=0`,
		"Structure alignment error"
	)

_Static_assert	(	(sizeof(tstrM2mClientState)%4)	= `=0`,
		"Structure alignment error"
	)

_Static_assert	(	(sizeof(tstrM2Mservercmd)%4)	= `=0`,
		"Structure alignment error"
	)

_Static_assert	(	(sizeof(tstrM2mSetMacAddress)%4)	= `=0`,
		"Structure alignment error"
	)

_Static_assert	(	(sizeof(tstrM2MProvisionModeConfig)%4)	= `=0`,
		"Structure alignment error"
	)

_Static_assert	(	(sizeof(tstrM2MConnInfo)%4)	= `=0`,
		"Structure alignment error"
	)

_Static_assert	(	(sizeof(tstrM2MSNTPConfig)%4)	= `=0`,
		"Structure alignment error"
	)

_Static_assert	(	(sizeof(tstrSystemTime)%4)	= `=0`,
		"Structure alignment error"
	)

_Static_assert	(	(sizeof(tstrM2MMulticastMac)%4)	= `=0`,
		"Structure alignment error"
	)

_Static_assert	(	(sizeof(tstrPrng)%4)	= `=0`,
		"Structure alignment error"
	)

_Static_assert	(	(sizeof(tstrConfAutoRate)%4)	= `=0`,
		"Structure alignment error"
	)

Microchip® Advanced Software Framework

Data Structures

Enumerations

Functions