- s -

• s_memory : twis_example.c
• s_status_cmd : twis_example.c
• s_tap_int : bma222.c , bma250.c
• s_u32_addr : twis_example.c
• s_u8_addr_pos : twis_example.c
• sample_range_limit : jdmaster.c
• sample_rate_hz : audio_mixer.c
• samplesperrow : jcmaster.c
• saw_Adobe_marker : jdmarker.c
• saw_JFIF_marker : jdmarker.c
• saw_SOF : jdmarker.c
• saw_SOI : jdmarker.c
• sBlockingConsumerCount : BlockQ.c , AltBlckQ.c
• sBlockingProducerCount : BlockQ.c , AltBlckQ.c
• scale_factor : cdjpeg.h , jpeglib.h
• scale_lsb_per_dps : imu3000.c
• scale_table : hmc5883l.c
• scan_number : jpeglib.h
• scanlines : jpeglib.h
• sCheckVariables : semtest.c
• sd_mmc_card : sd_mmc.c
• sd_mmc_cards : sd_mmc.c
• sd_mmc_ejected : sd_mmc_mem.c
• sd_mmc_nb_block_remaining : sd_mmc.c
• sd_mmc_nb_block_to_tranfer : sd_mmc.c
• sd_mmc_opt : avr32/components/memory/sd_mmc/sd_mmc_spi/sd_mmc_spi.c
• sd_mmc_pba_hz : avr32/components/memory/sd_mmc/sd_mmc_spi/sd_mmc_spi.c
• sd_mmc_slot_sel : sd_mmc.c
• SD_MMC_SPI_DISK_SIZE : sd_mmc_spi_mem.c
• sd_mmc_spi_init_done : avr32/components/memory/sd_mmc/sd_mmc_spi/sd_mmc_spi.c , sd_mmc_spi_mem.c , avr32/components/memory/sd_mmc/sd_mmc_spi/sd_mmc_spi.h
• sd_mmc_spi_last_address : sd_mmc_spi_mem.c
• sd_mmc_spi_last_block_address : avr32/components/memory/sd_mmc/sd_mmc_spi/sd_mmc_spi.c , avr32/components/memory/sd_mmc/sd_mmc_spi/sd_mmc_spi.h
• sd_mmc_spi_presence_status : sd_mmc_spi_mem.c
• sd_mmc_trans_units : sd_mmc.c
• sd_trans_multipliers : sd_mmc.c
• Se : jcmaster.c , jdmarker.c
• sector_buf : avr32/components/memory/sd_mmc/sd_mmc_spi/sd_mmc_spi.c , _asf_v1/at45dbx.c , at45dbx_mem.c , avr32/components/memory/sd_mmc/sd_mmc_spi/unit_tests/unit_tests.c , common/components/memory/data_flash/at45dbx/unit_tests/unit_tests.c
• sector_buf_0 : sd_mmc_mem.c
• sector_buf_1 : sd_mmc_mem.c
• seed : op_fix_rand.c
• sense_data : uhi_msc.c
• sensor_dlpf_cfg : imu3000.c
• sensor_fs_sel : imu3000.c
• sensor_oss : bmp.c
• sensors : touch_api.h
• serial_rx_buf : sio2ncp.c , usb/sio2host.c , uart/sio2host.c
• serial_rx_buf_head : sio2ncp.c , usb/sio2host.c , uart/sio2host.c
• serial_rx_buf_tail : sio2ncp.c , usb/sio2host.c , uart/sio2host.c
• serial_rx_count : sio2ncp.c , usb/sio2host.c , uart/sio2host.c
• set_volume : audio_mixer.c
• setup : audio_mixer.c
• setup_flag : sal.c
• sfh7770_initialized : sfh7770.c
• signal1_buf : uc3c_ek-can-lin-loopbacks-demo/gui.c , avr32/applications/uc3c_ek-can-lin-loopbacks-demo/main.c
• signal2_buf : uc3c_ek-can-lin-loopbacks-demo/gui.c , lin_task.c
• signal3_buf : uc3c_ek-can-lin-loopbacks-demo/gui.c , can_task.c
• signal4_buf : uc3c_ek-can-lin-loopbacks-demo/gui.c , avr32/applications/uc3c_ek-can-lin-loopbacks-demo/main.c
• signal_buffer : uc3c-scope-meter-and-filtering/gui.c , uc3c_ek-can-lin-loopbacks-demo/gui.c
• signal_in_buf : uc3c_ek-can-lin-loopbacks-demo/gui.c
• signal_in_fft : uc3c_ek-can-lin-loopbacks-demo/gui.c
• signal_noise_gui : uc3c-scope-meter-and-filtering/gui.c , noise_task.c
• signal_noise_remote : noise_task.c
• signal_out_buf : uc3c_ek-can-lin-loopbacks-demo/gui.c
• signal_out_fft : uc3c_ek-can-lin-loopbacks-demo/gui.c
• signal_selected_display : uc3c-scope-meter-and-filtering/controller.c
• SIGNAL_TABLE : dac_task.c
• signalin_gui : noise_task.c , uc3c-scope-meter-and-filtering/gui.c , adc_task.c
• signalin_noise_gui : uc3c-scope-meter-and-filtering/gui.c , filter_task.c , noise_task.c
• signalin_noise_remote : remote_task.c , filter_task.c , noise_task.c
• signalin_remote : noise_task.c , adc_task.c
• signalout_fp_gui : uc3c-scope-meter-and-filtering/gui.c , filter_task.c
• signalout_fp_remote : filter_task.c , remote_task.c
• signalout_fpu_gui : uc3c-scope-meter-and-filtering/gui.c , filter_task.c
• signalout_fpu_remote : filter_task.c , remote_task.c
• signals_are_updated : uc3c_ek-can-lin-loopbacks-demo/gui.c
• sin_table : drivers/dacifb/example2/sinus.c , drivers/dacifb/example2/sinus.h , drivers/dacifb/example1/sinus.h , drivers/dacifb/example1/sinus.c
• sinus_table : applications/uc3c-scope-meter-and-filtering/sinus.c
• sizeofobject : jmemsys.h
• sleepmgr_locks : sleepmgr.c , uc3/sleepmgr.h
• slop : jmemmgr.c
• slope_first_x : bma222.c , bma250.c
• slope_first_y : bma222.c , bma250.c
• slope_first_z : bma222.c , bma250.c
• slope_int : bma220.c , bma250.c , bma222.c
• slope_sign : bma222.c , bma250.c
• smc_tab_cs_size : smc.c
• sNextCheckVariable : semtest.c
• source_row : jpegint.h
• space_per_minheight : jmemmgr.c
• SPI_DEVICE_EXAMPLE : spi_master_example.c
• sptr : jmemmgr.c
• sram_buffer : mdma_example.c
• Ss : jcmaster.c , jdmarker.c
• ssl_default_ciphers : ssl.h
• st_result : bma150.c
• start : audio_mixer.c
• state : avr32/applications/uc3c_ek-can-lin-loopbacks-demo/main.c , rtouch.c
• state_fct : avr32/applications/uc3c_ek-can-lin-loopbacks-demo/main.c
• state_machine : can_example2.c
• static_fcpu_hz : at42qt1060_controller.c , uc3c_ek-can-lin-loopbacks-demo/controller.c
• status : spi_master_example.c
• status_byte : bma222.c , bma150.c , bma250.c , bma220.c
• status_field : bma220.c , bma250.c , bma222.c , bma150.c
• stdio_base : stdio_serial.h , write.c , read.c , stdio_usb.h
• stdio_usb_interface_enable : stdio_usb.c
• step_led_task : wdt_example.c
• stop : audio_mixer.c
• str_buff : fat_example.c
• structsize : jpeglib.h
• suppress : jpeglib.h
• swap_channels : audio_mixer.c
• sysfont : sysfont.h , sysfont.c