- u -

• UART : QDebugSettings.h
• UART_RX_STATE_DATA : perf_api_serial_handler.c , serial_interface.h
• UART_RX_STATE_EOT : perf_api_serial_handler.c , serial_interface.h
• UART_RX_STATE_LENGTH : perf_api_serial_handler.c , serial_interface.h
• UART_RX_STATE_SOT : perf_api_serial_handler.c , serial_interface.h
• UC3 : parts.h
• UC3_A3_XPLAINED : board.h
• UC3_L0_QT600 : board.h
• UC3_L0_XPLAINED : board.h
• UC3_L0_XPLAINED_BC : board.h
• UC3A : parts.h
• UC3A0 : parts.h
• UC3A1 : parts.h
• UC3A3 : parts.h
• UC3A4 : parts.h
• UC3B : parts.h
• UC3B0 : parts.h
• UC3B1 : parts.h
• UC3B_BOARD_CONTROLLER : board.h
• UC3C : parts.h
• UC3C0 : parts.h
• UC3C1 : parts.h
• UC3C2 : parts.h
• UC3C_EK : board.h
• UC3D : parts.h
• UC3D3 : parts.h
• UC3D4 : parts.h
• UC3L : parts.h
• UC3L0 : parts.h
• UC3L0128 : parts.h
• UC3L0256 : parts.h
• UC3L3 : parts.h
• UC3L3_L4 : parts.h
• UC3L4 : parts.h
• UC3L_EK : board.h
• UNABLE_TO_CONTACT_PEER : perf_msg_const.h
• unlikely : compiler.h
• unused : compiler.h
• UNUSED : compiler.h
• UP_LED : common/applications/sensors/prox_gesture/main.c
• UPDATE_CONFIG_BYTE_86 : sha204_command_marshaling.h
• UPDATE_COUNT : sha204_command_marshaling.h
• UPDATE_DELAY : sha204_command_marshaling.h
• UPDATE_EXEC_MAX : sha204_command_marshaling.h
• UPDATE_MODE_IDX : sha204_command_marshaling.h
• UPDATE_RSP_SIZE : sha204_command_marshaling.h
• UPDATE_VALUE_IDX : sha204_command_marshaling.h
• UPLD_RES_FT_DISABLE : at86rf232.h , at86rf231.h , at86rf212b.h , at86rf233.h
• UPLD_RES_FT_ENABLE : at86rf232.h , at86rf231.h , at86rf212b.h , at86rf233.h
• US_PER_OCTECT : at86rf232/src/tal_rx.c , at86rf233/src/tal_rx.c , at86rf231/src/tal_rx.c , at86rf212/src/tal_rx.c , at86rf212b/src/tal_rx.c
• USART_BAUD_1200 : usart.h
• USART_BAUD_19200 : usart.h
• USART_BAUD_2400 : usart.h
• USART_BAUD_38400 : usart.h
• USART_BAUD_4800 : usart.h
• USART_BAUD_57600 : usart.h
• USART_BAUD_9600 : usart.h
• USART_BAUD_UNDEFINED : usart.h
• USART_DORD_bm : usart.c
• USART_TX_MAX_LENGTH : example_usart.c
• USART_UCPHA_bm : usart.c
• USBCLK_STARTUP_TIMEOUT : xmega/sysclk.h
• USE_ACCEL : common/applications/sensors/inertial_wake/main.c
• USE_FONT_BASIC_6x7 : applications/mxt143e_xplained_calculator_demo/conf_sysfont.h , services/wtk/training/conf_sysfont.h , applications/mxt143e_xplained_multi-touch_demo/conf_sysfont.h , services/wtk/example2_icon/conf_sysfont.h , applications/mxt143e_xplained_paint_demo/conf_sysfont.h
• USE_FONT_BPMONO_10x14 : services/wtk/example3_plot/conf_sysfont.h , services/wtk/example1_widgets/conf_sysfont.h
• USE_GYRO : common/applications/sensors/inertial_wake/main.c
• USE_PRINTF : common/applications/sensors/lightprox_wake/main.c , common/applications/sensors/inertial_wake/main.c , common/applications/sensors/prox_gesture/main.c
• USER_BOARD : board.h
• USER_CTRL_AUX_IF_EN : imu3000.h
• USER_CTRL_AUX_IF_RST : imu3000.h
• USER_CTRL_DMP_EN : imu3000.h
• USER_CTRL_DMP_RST : imu3000.h
• USER_CTRL_FIFO_EN : imu3000.h
• USER_CTRL_FIFO_RST : imu3000.h
• USER_CTRL_GYRO_RST : imu3000.h
• USER_EXT_BOARD : board.h