- d -

• DAC_8BIT_MAX : xmega/drivers/dac/unit_tests/unit_tests.c
• DAC_CH0 : dac.h
• DAC_CH1 : dac.h
• DAC_MAX : xmega/drivers/dac/unit_tests/unit_tests.c , xmega/drivers/adc/unit_tests/unit_tests.c
• DAC_MIN : xmega/drivers/dac/unit_tests/unit_tests.c , xmega/drivers/adc/unit_tests/unit_tests.c
• DATA_CTRL_HPFRO : kxtf9.h
• DATA_CTRL_HPFRO_100HZ : kxtf9.h
• DATA_CTRL_HPFRO_200HZ : kxtf9.h
• DATA_CTRL_HPFRO_400HZ : kxtf9.h
• DATA_CTRL_HPFRO_50HZ : kxtf9.h
• DATA_CTRL_ODR : kxtf9.h
• DATA_CTRL_ODR_100HZ : kxtf9.h
• DATA_CTRL_ODR_12_5HZ : kxtf9.h
• DATA_CTRL_ODR_200HZ : kxtf9.h
• DATA_CTRL_ODR_25HZ : kxtf9.h
• DATA_CTRL_ODR_400HZ : kxtf9.h
• DATA_CTRL_ODR_50HZ : kxtf9.h
• DATA_CTRL_ODR_800HZ : kxtf9.h
• DATA_INT_FIELD : bma220.h
• DATA_OUTPUT_OVERFLOW : hmc5883l.c
• DATA_PKT : range_measure.c
• DATA_RATE : hmc5883l.h
• DATA_RATE_0_75HZ : hmc5883l.h
• DATA_RATE_15HZ : hmc5883l.h
• DATA_RATE_1_5HZ : hmc5883l.h
• DATA_RATE_30HZ : hmc5883l.h
• DATA_RATE_3HZ : hmc5883l.h
• DATA_RATE_75HZ : hmc5883l.h
• DATA_RATE_7_5HZ : hmc5883l.h
• DATA_SIZE : thirdparty/fatfs/unit_tests/unit_tests.c , fatfs_access_example.c
• dbg : suite.h
• dbg_error : suite.h
• dbg_info : suite.h
• dbg_putchar : suite.h
• dbg_vprintf_pgm : suite.h
• DBM_VALUE : tal_helper.h
• DDE : ff.c
• DEBOUNCE_TICKS : xmega/services/timeout/timeout_example2/example2.c
• DEF_NAMEBUF : ff.c
• DEF_QT_DI : touch_api.h
• DEF_QT_DRIFT_HOLD_TIME : touch_api.h
• DEF_QT_MAX_ON_DURATION : touch_api.h
• DEF_QT_NEG_DRIFT_RATE : touch_api.h
• DEF_QT_POS_DRIFT_RATE : touch_api.h
• DEF_QT_POS_RECAL_DELAY : touch_api.h
• DEF_QT_RECAL_THRESHOLD : touch_api.h
• DEF_TOUCH_QDEBUG_ENABLE : QDebugTransport.h
• DEF_TOUCH_QDEBUG_ENABLE_AT : QDebugTransport.h
• DEF_TOUCH_QDEBUG_ENABLE_QM : QDebugTransport.h
• DEF_TOUCH_QDEBUG_ENABLE_QTA : QDebugTransport.h
• DEF_TOUCH_QDEBUG_ENABLE_QTB : QDebugTransport.h
• DEFAULT_ADDR : app_init.h
• DEFAULT_CHANNEL : app_init.h
• DEFAULT_FRAME_LENGTH : per_mode_common_utils.c
• DEFAULT_NO_OF_TEST_FRAMES : per_mode_common_utils.c
• DEFAULT_PAN_ID : app_init.h
• DEFAULT_TX_PWR_BPSK_20 : at86rf212b/inc/tal_pib.h
• DEFAULT_TX_PWR_CHINA_CH_0_3 : at86rf212b/inc/tal_pib.h
• DEFAULT_TX_PWR_OQPSK_RC_250_500 : at86rf212b/inc/tal_pib.h
• DEFAULT_TX_PWR_OQPSK_SIN_RC_100_200_400 : at86rf212b/inc/tal_pib.h
• DEFINE_TEST_ARRAY : suite.h
• DEFINE_TEST_CASE : suite.h
• DEFINE_TEST_SUITE : suite.h
• DEG_TO_RAD : constants.h
• degrees : physics.c
• DELAY_BEFORE_APP_RESET_IN_MICRO_SEC : per_mode_receptor.c
• DELAY_COUNTER : sha204_timer.c
• delay_cycles : cycle_counter.h
• delay_init : delay.h
• delay_ms : delay.h
• delay_s : delay.h
• delay_us : delay.h , avr_compiler.h
• DELAYUS : BitBangSPI_Master.h
• DERIVE_KEY_COUNT_LARGE : sha204_command_marshaling.h
• DERIVE_KEY_COUNT_SMALL : sha204_command_marshaling.h
• DERIVE_KEY_DELAY : sha204_command_marshaling.h
• DERIVE_KEY_EXEC_MAX : sha204_command_marshaling.h
• DERIVE_KEY_MAC_IDX : sha204_command_marshaling.h
• DERIVE_KEY_MAC_SIZE : sha204_command_marshaling.h
• DERIVE_KEY_RANDOM_FLAG : sha204_command_marshaling.h
• DERIVE_KEY_RANDOM_IDX : sha204_command_marshaling.h
• DERIVE_KEY_RSP_SIZE : sha204_command_marshaling.h
• DERIVE_KEY_TARGETKEY_IDX : sha204_command_marshaling.h
• DES_BLOCK_COUNT : des_example.c
• DES_BLOCK_LENGTH : des_example.c
• DEV_ID_REG : at30ts.h
• DEV_RX_SLOT_INDEX : mac_internal.h
• DEV_TX_SLOT_INDEX : mac_internal.h
• DEVREV_COUNT : sha204_command_marshaling.h
• DEVREV_DELAY : sha204_command_marshaling.h
• DEVREV_EXEC_MAX : sha204_command_marshaling.h
• DEVREV_PARAM1_IDX : sha204_command_marshaling.h
• DEVREV_PARAM2_IDX : sha204_command_marshaling.h
• DEVREV_RSP_SIZE : sha204_command_marshaling.h
• DIR_Attr : ff.c
• DIR_CrtDate : ff.c
• DIR_CrtTime : ff.c
• DIR_FileSize : ff.c
• DIR_FstClusHI : ff.c
• DIR_FstClusLO : ff.c
• DIR_Name : ff.c
• DIR_NTres : ff.c
• DIR_WrtDate : ff.c
• DIR_WrtTime : ff.c
• DIS_I2C : bma180.h
• DIS_REG : bma180.h
• DISABLE : compiler.h
• DISABLE_ALL_RPC_MODES : app_per_mode.h
• Disable_global_interrupt : interrupt_avr8.h
• DISABLE_RX_SAFE_MODE : app_per_mode.h
• DISCONNECT_NODE : app_per_mode.h
• DISCONNECT_PEER : perf_msg_const.h
• DISK_DEV_NUM : thirdparty/fatfs/unit_tests/unit_tests.c
• DISPLAY_COLOR : multi-touch_demo.c
• div_ceil : compiler.h
• DLPF_CFG_10HZ : imu3000.h , itg3200.h
• DLPF_CFG_188HZ : imu3000.h , itg3200.h
• DLPF_CFG_20HZ : imu3000.h , itg3200.h
• DLPF_CFG_2100HZ : itg3200.h , imu3000.h
• DLPF_CFG_256HZ : itg3200.h , imu3000.h
• DLPF_CFG_42HZ : imu3000.h , itg3200.h
• DLPF_CFG_5HZ : itg3200.h , imu3000.h
• DLPF_CFG_98HZ : imu3000.h , itg3200.h
• DLPF_CFG_FIELD : imu3000.h
• DMA_CHANNEL_N : aes_example3.c
• dma_get_channel_address_from_num : dma.h
• DMA_NUMBER_OF_CHANNELS : dma.h
• DOWN_LED : common/applications/sensors/prox_gesture/main.c
• driver_adtc_start : sd_mmc.c
• driver_adtc_stop : sd_mmc.c
• driver_deselect_device : sd_mmc.c
• driver_get_bus_width : sd_mmc.c
• driver_get_response : sd_mmc.c
• driver_get_response_128 : sd_mmc.c
• driver_init : sd_mmc.c
• driver_is_high_speed_capable : sd_mmc.c
• driver_read_word : sd_mmc.c
• driver_select_device : sd_mmc.c
• driver_send_clock : sd_mmc.c
• driver_send_cmd : sd_mmc.c
• driver_start_read_blocks : sd_mmc.c
• driver_start_write_blocks : sd_mmc.c
• driver_wait_end_of_read_blocks : sd_mmc.c
• driver_wait_end_of_write_blocks : sd_mmc.c
• driver_write_word : sd_mmc.c
• DST_PAN_ID : app_init.h
• DST_SHORT_ADDR : app_init.h
• DUMMY_BOARD : board.h
• DUMMY_PAYLOAD : app_init.h