- s -

• s_tap_int : bma250.c , bma222.c
• save_timeout : xmega/applications/xmega_a1_xplained_demo/main.c
• scale_lsb_per_dps : imu3000.c
• scale_table : hmc5883l.c
• scan_channel_mask : per_mode_initiator.c
• scan_duration : per_mode_initiator.c
• scanning : per_mode_initiator.c
• sd_mmc_card : sd_mmc.c
• sd_mmc_cards : sd_mmc.c
• sd_mmc_ejected : sd_mmc_mem.c
• sd_mmc_nb_block_remaining : sd_mmc.c
• sd_mmc_nb_block_to_tranfer : sd_mmc.c
• sd_mmc_slot_sel : sd_mmc.c
• sd_mmc_trans_units : sd_mmc.c
• sd_trans_multipliers : sd_mmc.c
• sdram_config : ebi_sdram_example.c
• sector_buf : common/components/memory/data_flash/at45dbx/unit_tests/unit_tests.c , at45dbx_mem.c
• sector_buf_0 : sd_mmc_mem.c
• sector_buf_1 : sd_mmc_mem.c
• selected_pallet_color : paint_demo.c
• sensor_dlpf_cfg : imu3000.c
• sensor_fs_sel : imu3000.c
• sensor_oss : bmp.c
• sensors : touch_api.h , eeprom_access.c
• seq_num : peer_search_initiator.c , peer_search_receptor.c , range_measure.c
• seq_num_initiator : per_mode_initiator.c
• seq_num_receptor : per_mode_receptor.c
• sequence_buffer : xmega/applications/xmega_a1_xplained_demo/main.c
• sequence_buffer_length : xmega/applications/xmega_a1_xplained_demo/main.c
• SequenceH : QDebugTransport.c , QDebugTransport.h
• SequenceL : QDebugTransport.c , QDebugTransport.h
• serial : example1_xmega.c
• serial_rx_buf : sio2ncp.c , sio2host.c
• serial_rx_buf_head : sio2ncp.c , sio2host.c
• serial_rx_buf_tail : sio2ncp.c , sio2host.c
• serial_rx_count : sio2ncp.c , sio2host.c
• set_param_cb : per_mode_initiator.c
• sfh7770_initialized : sfh7770.c
• sha204_timer_expired : sha204_timer.c , sha204_timer.h
• SHORTENUM : perf_msg_const.h , mac_msg_const.h
• sine : dac_example1.c
• sinefreqs : sound.c
• single_ans : aes_example2.c , aes_example3.c , des_example.c , aes_example1.c
• sio_rx_buf : perf_api_serial_handler.c , serial_interface.c
• sio_rx_length : perf_api_serial_handler.c , serial_interface.c
• sio_rx_ptr : perf_api_serial_handler.c , serial_interface.c
• sio_rx_state : perf_api_serial_handler.c , serial_interface.c
• sio_tx_buf : perf_api_serial_handler.c , serial_interface.c
• slave : xmega/drivers/twi/unit_tests/unit_tests.c
• sleepmgr_configs : xmega/sleepmgr.h , sleepmgr.c
• sleepmgr_locks : sleepmgr.c , xmega/sleepmgr.h
• slider : app_widget.c
• slope_first_x : bma250.c , bma222.c
• slope_first_y : bma250.c , bma222.c
• slope_first_z : bma250.c , bma222.c
• slope_int : bma220.c , bma250.c , bma222.c
• slope_sign : bma250.c , bma222.c
• smiley_data : common/services/gfx_mono/unit_tests/unit_tests.c , example_screen_dump.c
• snd_cnt : sound.c
• snd_len : sound.c
• snd_samplewidth : sound.c
• source : example2/dma_example.c , example1/dma_example.c
• SPI_DEVICE_EXAMPLE : spi_master_example.c
• spinner_choicestrings : common/services/gfx_mono/unit_tests_spin_ctrl/unit_tests.c
• st_result : bma150.c
• start_time : per_mode_initiator.c
• state_flag : wdt_example.c
• state_table : performance_main.c
• status : twim.c , spi_master_example.c
• status_byte : bma222.c , bma250.c , bma150.c , bma220.c
• status_field : bma150.c , bma250.c , bma222.c , bma220.c
• stb_restart_required : stb.c
• stdio_base : stdio_serial.h , read.c , write.c
• storage_buffer : performance_main.c
• stream_pkt : perf_api.h , per_mode_common_utils.c
• sub_frame : app_widget.c
• sub_frame_background : app_widget.c
• success : aes_example1.c , aes_example2.c , common/components/crypto/sha204/unit_tests/unit_tests.c , xmega/services/timeout/unit_tests/unit_tests.c , aes_example3.c
• sysfont : gfx_mono/sysfont.c , gfx_mono/sysfont.h , gfx/sysfont.c , gfx/sysfont.h
• SYSFONT_DEFINE_GLYPHS : gfx_mono/sysfont.c