Here is a list of all functions, variables, defines, enums, and typedefs with links to the files they belong to:

- d -

• d_tap_int : bma250.c , bma222.c
• DAC_8BIT_MAX : xmega/drivers/dac/unit_tests/unit_tests.c
• DAC_ADJ_LEFT : dac.h
• DAC_ADJ_RIGHT : dac.h
• dac_adjust : dac.h
• DAC_CH0 : dac.h
• DAC_CH1 : dac.h
• dac_channel_is_ready() : dac.h
• dac_disable() : dac.c , dac.h
• dac_disable_clock() : dac.c
• dac_enable() : dac.c , dac.h
• dac_enable_clock() : dac.c
• dac_get_calibration_data() : dac.h
• dac_get_channel_value() : dac.h
• dac_is_enabled() : dac.c , dac.h
• DAC_MAX : xmega/drivers/dac/unit_tests/unit_tests.c , xmega/drivers/adc/unit_tests/unit_tests.c
• DAC_MIN : xmega/drivers/dac/unit_tests/unit_tests.c , xmega/drivers/adc/unit_tests/unit_tests.c
• dac_read_configuration() : dac.c , dac.h
• DAC_REF_AREFA : dac.h
• DAC_REF_AREFB : dac.h
• DAC_REF_AVCC : dac.h
• DAC_REF_BANDGAP : dac.h
• dac_reference : dac.h
• dac_set_active_channel() : dac.h
• dac_set_channel_value() : dac.h
• dac_set_conversion_interval() : dac.h
• dac_set_conversion_parameters() : dac.h
• dac_set_conversion_trigger() : dac.h
• dac_set_refresh_interval() : dac.h
• dac_wait_for_channel_ready() : dac.h
• dac_write_configuration() : dac.c , dac.h
• data : perf_api_serial_handler.c , des_example.c , xmega/drivers/des/unit_tests/unit_tests.c , serial_interface.c , spi_master_example.c
• data_block : aes_example2.c , des_example.c
• data_buffer : thirdparty/fatfs/unit_tests/unit_tests.c , fatfs_access_example.c
• data_cbc : xmega/drivers/des/unit_tests/unit_tests.c
• data_count : twim.c
• DATA_CTRL_HPFRO : kxtf9.h
• DATA_CTRL_HPFRO_100HZ : kxtf9.h
• DATA_CTRL_HPFRO_200HZ : kxtf9.h
• DATA_CTRL_HPFRO_400HZ : kxtf9.h
• DATA_CTRL_HPFRO_50HZ : kxtf9.h
• DATA_CTRL_ODR : kxtf9.h
• DATA_CTRL_ODR_100HZ : kxtf9.h
• DATA_CTRL_ODR_12_5HZ : kxtf9.h
• DATA_CTRL_ODR_200HZ : kxtf9.h
• DATA_CTRL_ODR_25HZ : kxtf9.h
• DATA_CTRL_ODR_400HZ : kxtf9.h
• DATA_CTRL_ODR_50HZ : kxtf9.h
• DATA_CTRL_ODR_800HZ : kxtf9.h
• data_int : bma220.c , bma250.c , bma222.c
• DATA_INT_FIELD : bma220.h
• data_length : perf_api_serial_handler.c , serial_interface.c
• DATA_OUTPUT_OVERFLOW : hmc5883l.c
• DATA_PKT : range_measure.c
• DATA_RATE : hmc5883l.h
• DATA_RATE_0_75HZ : hmc5883l.h
• DATA_RATE_15HZ : hmc5883l.h
• DATA_RATE_1_5HZ : hmc5883l.h
• DATA_RATE_30HZ : hmc5883l.h
• DATA_RATE_3HZ : hmc5883l.h
• DATA_RATE_75HZ : hmc5883l.h
• DATA_RATE_7_5HZ : hmc5883l.h
• DATA_SIZE : thirdparty/fatfs/unit_tests/unit_tests.c , fatfs_access_example.c
• data_types : at30ts.h
• DATAREQUEST : tal.h
• DATAREQUEST_IMPL_POLL : tal.h
• dbg : suite.h
• dbg_error : suite.h
• dbg_info : suite.h
• dbg_putchar : suite.h
• dbg_vprintf_pgm : suite.h
• DBM_VALUE : tal_helper.h
• DDE : ff.c
• DEBOUNCE_TICKS : xmega/services/timeout/timeout_example2/example2.c
• DEBOUNCE_TIMEOUT : xmega/services/timeout/timeout_example2/example2.c
• dec_initialized : sal.c
• dec_key : sal.c
• DEF_NAMEBUF : ff.c
• DEF_QT_DI : touch_api.h
• DEF_QT_DRIFT_HOLD_TIME : touch_api.h
• DEF_QT_MAX_ON_DURATION : touch_api.h
• DEF_QT_NEG_DRIFT_RATE : touch_api.h
• DEF_QT_POS_DRIFT_RATE : touch_api.h
• DEF_QT_POS_RECAL_DELAY : touch_api.h
• DEF_QT_RECAL_THRESHOLD : touch_api.h
• DEF_TOUCH_QDEBUG_ENABLE : QDebugTransport.h
• DEF_TOUCH_QDEBUG_ENABLE_AT : QDebugTransport.h
• DEF_TOUCH_QDEBUG_ENABLE_QM : QDebugTransport.h
• DEF_TOUCH_QDEBUG_ENABLE_QTA : QDebugTransport.h
• DEF_TOUCH_QDEBUG_ENABLE_QTB : QDebugTransport.h
• DEFAULT_ADDR : app_init.h
• DEFAULT_CHANNEL : app_init.h
• default_event_handler() : sensor.c , sensor.h
• DEFAULT_FRAME_LENGTH : per_mode_common_utils.c
• DEFAULT_NO_OF_TEST_FRAMES : per_mode_common_utils.c
• DEFAULT_PAN_ID : app_init.h
• default_trx_config_params : per_mode_common_utils.c , app_per_mode.h
• DEFAULT_TX_PWR_BPSK_20 : at86rf212b/inc/tal_pib.h
• DEFAULT_TX_PWR_CHINA_CH_0_3 : at86rf212b/inc/tal_pib.h
• DEFAULT_TX_PWR_OQPSK_RC_250_500 : at86rf212b/inc/tal_pib.h
• DEFAULT_TX_PWR_OQPSK_SIN_RC_100_200_400 : at86rf212b/inc/tal_pib.h
• DEFINE_TEST_ARRAY : suite.h
• DEFINE_TEST_CASE : suite.h
• DEFINE_TEST_SUITE : suite.h
• DEG_TO_RAD : constants.h
• degrees : physics.c
• DELAY_BEFORE_APP_RESET_IN_MICRO_SEC : per_mode_receptor.c
• DELAY_COUNTER : sha204_timer.c
• delay_cycles : cycle_counter.h
• delay_init : delay.h
• delay_ms : delay.h
• delay_s : delay.h
• delay_us : delay.h , avr_compiler.h
• DELAYUS : BitBangSPI_Master.h
• delivery : QDebug.c
• demo_string : app_widget.c
• DERIVE_KEY_COUNT_LARGE : sha204_command_marshaling.h
• DERIVE_KEY_COUNT_SMALL : sha204_command_marshaling.h
• DERIVE_KEY_DELAY : sha204_command_marshaling.h
• DERIVE_KEY_EXEC_MAX : sha204_command_marshaling.h
• DERIVE_KEY_MAC_IDX : sha204_command_marshaling.h
• DERIVE_KEY_MAC_SIZE : sha204_command_marshaling.h
• DERIVE_KEY_RANDOM_FLAG : sha204_command_marshaling.h
• DERIVE_KEY_RANDOM_IDX : sha204_command_marshaling.h
• DERIVE_KEY_RSP_SIZE : sha204_command_marshaling.h
• DERIVE_KEY_TARGETKEY_IDX : sha204_command_marshaling.h
• des_3des_decrypt() : des.h
• des_3des_encrypt() : des.h
• DES_BLOCK_COUNT : des_example.c
• DES_BLOCK_LENGTH : des_example.c
• des_cbc_decrypt() : des.h
• des_cbc_encrypt() : des.h
• des_decrypt() : des.h
• des_encrypt() : des.h
• dest_block_tc : xmega/drivers/dma/unit_tests/unit_tests.c
• destination : example1/dma_example.c , example2/dma_example.c
• DEV_ID_REG : at30ts.h
• dev_range : hmc5883l.c
• DEV_RX_SLOT_INDEX : mac_internal.h
• dev_tx_gts_q : mac_gts.c
• DEV_TX_SLOT_INDEX : mac_internal.h
• device_address : sha204_i2c.c
• device_id : example1_xmega.c
• device_type : at30ts.h
• device_type_t : at30ts.h
• DEVREV_COUNT : sha204_command_marshaling.h
• DEVREV_DELAY : sha204_command_marshaling.h
• DEVREV_EXEC_MAX : sha204_command_marshaling.h
• DEVREV_PARAM1_IDX : sha204_command_marshaling.h
• DEVREV_PARAM2_IDX : sha204_command_marshaling.h
• DEVREV_RSP_SIZE : sha204_command_marshaling.h
• differential_signed_average() : xmega/drivers/adc/unit_tests/unit_tests.c
• DIR_Attr : ff.c
• DIR_CrtDate : ff.c
• DIR_CrtTime : ff.c
• DIR_FileSize : ff.c
• dir_find() : ff.c
• DIR_FstClusHI : ff.c
• DIR_FstClusLO : ff.c
• DIR_Name : ff.c
• dir_next() : ff.c
• DIR_NTres : ff.c
• dir_read() : ff.c
• dir_register() : ff.c
• dir_remove() : ff.c
• dir_sdi() : ff.c
• dir_tbl : common/applications/sensors/prox_gesture/main.c
• DIR_WrtDate : ff.c
• DIR_WrtTime : ff.c
• direction_labels : common/applications/sensors/prox_gesture/main.c
• direction_t : common/applications/sensors/prox_gesture/main.c
• DIS_I2C : bma180.h
• DIS_REG : bma180.h
• DISABLE : compiler.h
• DISABLE_ALL_RPC_MODES : app_per_mode.h
• Disable_global_interrupt : interrupt_avr8.h
• DISABLE_RX_SAFE_MODE : app_per_mode.h
• DISASSOCIATIONNOTIFICATION : tal.h
• DISCONNECT_NODE : app_per_mode.h
• DISCONNECT_PEER : perf_msg_const.h
• disconnect_peer_node() : per_mode_initiator.c , perf_api.h
• DISK_DEV_NUM : thirdparty/fatfs/unit_tests/unit_tests.c
• disk_initialize() : diskio.c , diskio.h
• disk_ioctl() : diskio.h , diskio.c
• disk_read() : diskio.h , diskio.c
• disk_status() : diskio.h , diskio.c
• disk_write() : diskio.h , diskio.c
• dispatch_event() : mac_dispatcher.c , mac_internal.h
• DISPLAY_COLOR : multi-touch_demo.c
• display_status() : sha204_example_led.h , sha204_example_log.h , sha204_example_led.c
• div_ceil : compiler.h
• DLPF_CFG_10HZ : imu3000.h , itg3200.h
• DLPF_CFG_188HZ : itg3200.h , imu3000.h
• DLPF_CFG_20HZ : itg3200.h , imu3000.h
• DLPF_CFG_2100HZ : itg3200.h , imu3000.h
• DLPF_CFG_256HZ : itg3200.h , imu3000.h
• DLPF_CFG_42HZ : itg3200.h , imu3000.h
• DLPF_CFG_5HZ : itg3200.h , imu3000.h
• DLPF_CFG_98HZ : imu3000.h , itg3200.h
• DLPF_CFG_FIELD : imu3000.h
• dma_callback_t : dma.h
• DMA_CH_BUSY : dma.h
• DMA_CH_FREE : dma.h
• DMA_CH_PENDING : dma.h
• DMA_CH_TRANSFER_COMPLETED : dma.h
• DMA_CH_TRANSFER_ERROR : dma.h
• dma_channel_disable() : dma.h
• dma_channel_enable() : dma.h
• dma_channel_is_busy() : dma.h
• dma_channel_is_enabled() : dma.h
• DMA_CHANNEL_N : aes_example3.c
• dma_channel_num_t : dma.h
• dma_channel_read_config() : dma.h , dma.c
• dma_channel_reset() : dma.h
• dma_channel_set_burst_length() : dma.h
• dma_channel_set_dest_dir_mode() : dma.h
• dma_channel_set_dest_reload_mode() : dma.h
• dma_channel_set_destination_address() : dma.h
• dma_channel_set_interrupt_level() : dma.h
• dma_channel_set_repeats() : dma.h
• dma_channel_set_single_shot() : dma.h
• dma_channel_set_source_address() : dma.h
• dma_channel_set_src_dir_mode() : dma.h
• dma_channel_set_src_reload_mode() : dma.h
• dma_channel_set_transfer_count() : dma.h
• dma_channel_set_trigger_source() : dma.h
• dma_channel_status : dma.h
• dma_channel_trigger_block_transfer() : dma.h
• dma_channel_unset_single_shot() : dma.h
• dma_channel_write_burst_length() : dma.h
• dma_channel_write_config() : dma.c , dma.h
• dma_channel_write_destination() : dma.h
• dma_channel_write_repeats() : dma.h
• dma_channel_write_source() : dma.h
• dma_channel_write_transfer_count() : dma.h
• dma_data : dma.c
• dma_disable() : dma.h , dma.c
• dma_enable() : dma.c , dma.h
• dma_get_channel_address_from_num : dma.h
• dma_get_channel_status() : dma.h
• dma_has_completed : xmega/drivers/dma/unit_tests/unit_tests.c
• dma_int_level_t : dma.h
• DMA_INT_LVL_HI : dma.h
• DMA_INT_LVL_LO : dma.h
• DMA_INT_LVL_MED : dma.h
• DMA_INT_LVL_OFF : dma.h
• dma_interrupt() : dma.c
• DMA_NUMBER_OF_CHANNELS : dma.h
• dma_set_callback() : dma.c , dma.h
• dma_set_double_buffer_mode() : dma.h
• dma_set_priority_mode() : dma.h
• dma_transfer_block() : xmega/drivers/dma/unit_tests/unit_tests.c
• dma_transfer_is_complete() : xmega/drivers/dma/unit_tests/unit_tests.c
• do_init_pib() : mac_misc.c
• double_to_fixed() : fixed_t.h
• DOWN : common/applications/sensors/prox_gesture/main.c
• DOWN_LED : common/applications/sensors/prox_gesture/main.c
• draw_finger_square() : multi-touch_demo.c
• draw_paint_pallet() : paint_demo.c
• draw_pallet_labels() : paint_demo.c
• DRESULT : diskio.h
• driver_adtc_start : sd_mmc.c
• driver_adtc_stop : sd_mmc.c
• driver_deselect_device : sd_mmc.c
• driver_get_bus_width : sd_mmc.c
• driver_get_response : sd_mmc.c
• driver_get_response_128 : sd_mmc.c
• driver_init : sd_mmc.c
• driver_is_high_speed_capable : sd_mmc.c
• driver_read_word : sd_mmc.c
• driver_select_device : sd_mmc.c
• driver_send_clock : sd_mmc.c
• driver_send_cmd : sd_mmc.c
• driver_start_read_blocks : sd_mmc.c
• driver_start_write_blocks : sd_mmc.c
• driver_wait_end_of_read_blocks : sd_mmc.c
• driver_wait_end_of_write_blocks : sd_mmc.c
• driver_write_word : sd_mmc.c
• DST_PAN_ID : app_init.h
• DST_SHORT_ADDR : app_init.h
• DSTATUS : diskio.h
• DUMMY_BOARD : board.h
• dummy_data : xmega/drivers/aes/unit_tests/unit_tests.c
• DUMMY_ID : services/wtk/example1_widgets/widget_gui.c , services/wtk/example3_plot/widget_gui.c , services/wtk/example2_icon/widget_gui.c
• DUMMY_PAYLOAD : app_init.h
• dump_trx_register_values() : perf_api.h , per_mode_common_utils.c
• dump_usart : gfx_mono_screen_dump.h
• duty_cycle_percent_1 : xmega/services/pwm/example2/example2.c
• duty_cycle_percent_2 : xmega/services/pwm/example2/example2.c
• DWORD : integer.h