Here is a list of all functions, variables, defines, enums, and typedefs with links to the files they belong to:

- b -

• B : op_fix_asin.c , op_fix_exp.c
• b : jpegint.h , jdmarker.c
• B1 : bmp.c
• B2 : bmp.c
• b_at45dbx_unloaded : at45dbx_mem.c
• B_CB_OFF : jccolor.c
• B_CR_OFF : jccolor.c
• b_datalog_set_current_log_drive_toDF() : datalog.c , datalog.h
• b_datalog_set_current_log_drive_toSDMMC() : datalog.c , datalog.h
• b_fsaccess_init() : fsaccess.c , fsaccess.h
• b_joystick_get_value() : joystick.c , applications/evk1100-control-panel/sensors/joystick.h
• b_joystick_init() : joystick.c , applications/evk1100-control-panel/sensors/joystick.h
• b_lcd_get_value() : lcd.c , lcd.h
• b_ledb1_get_value() : cpled.c , cpled.h
• b_ledb2_get_value() : cpled.c , cpled.h
• b_ledm1_get_value() : cpled.c , cpled.h
• b_ledm2_get_value() : cpled.c , cpled.h
• b_light_alarm : light.c
• b_light_alarm_max : light.c
• b_light_alarm_min : light.c
• b_light_get_value() : light.c , light.h
• b_light_init() : light.c , light.h
• b_micro_mute : services/usb/_asf_v1/class/audio/examples/device/enum/device/usb_specific_request.c
• b_microphone_pause : device_audio_task.c
• b_microphone_started : device_audio_task.c
• b_MMI_do_nothing() : mmi.c
• b_mmi_format_a() : mmi.c
• b_mmi_format_b() : mmi.c
• b_mmi_mkdir_aLOG() : mmi.c
• b_mmi_mkdir_bLOG() : mmi.c
• b_pot_alarm : potentiometer.c
• b_pot_alarm_max : potentiometer.c
• b_pot_alarm_min : potentiometer.c
• b_potentiometer_get_value() : potentiometer.c , potentiometer.h
• b_potentiometer_init() : potentiometer.c , potentiometer.h
• b_preample_run : udi_phdc.c
• b_previous_direction : ai_usb_ms.c
• b_pushb1 : pushb.c
• b_pushb1_get_value() : pushb.c , pushb.h
• b_pushb1_init() : pushb.c , pushb.h
• b_pushb2 : pushb.c
• b_pushb2_get_value() : pushb.c , pushb.h
• b_pushb2_init() : pushb.c , pushb.h
• b_pushb3 : pushb.c
• b_pushb3_get_value() : pushb.c , pushb.h
• b_pushb3_init() : pushb.c , pushb.h
• b_run : udi_phdc.c
• b_rx_new : uart_usb_lib.c
• B_SCALE : jquant2.c
• b_sensor_get_value() : avr32/applications/evk1100-control-panel/sensors/sensor.c , avr32/applications/evk1100-control-panel/sensors/sensor.h
• b_speaker_mute : services/usb/_asf_v1/class/audio/examples/device/enum/device/usb_specific_request.c
• b_supervisor_switch_to_maintenance_mode() : supervisor.c
• b_temp_alarm : temperature.c
• b_temp_alarm_max : temperature.c
• b_temp_alarm_min : temperature.c
• b_temperature_get_value() : temperature.c , temperature.h
• b_temperature_init() : temperature.c , temperature.h
• b_tx_new : uart_usb_lib.c
• b_uhi_msc_free : uhi_msc.c
• b_usbsys_start() : usbsys.c , usbsys.h
• b_vmem_unloaded : common/components/memory/virtual_mem/virtual_mem.c
• B_Y_OFF : jccolor.c
• background_image : background_image.c , background_image.h
• backing_store_info : jmemsys.h
• backing_store_ptr : jmemsys.h
• backlight_IO : dip204.h
• backlight_options : dip204.h
• backlight_power : dip204.h
• backlight_power_decrease : dip204.h
• backlight_power_increase : dip204.h
• backlight_PWM : dip204.h
• BADCERT_CN_MISMATCH : x509.h
• BADCERT_EXPIRED : x509.h
• BADCERT_NOT_TRUSTED : x509.h
• BADCERT_REVOKED : x509.h
• BADCRL_EXPIRED : x509.h
• BADCRL_NOT_TRUSTED : x509.h
• bAlarm : joystick.c
• bAlarm1 : pushb.c
• bAlarm2 : pushb.c
• bAlarm3 : pushb.c
• band_table : bma020.c , bma220.c , bma150.c , bma180.c , bma250.c , bma222.c , hmc5883l.c , itg3200.c , imu3000.c , kxtf9.c
• BANDWIDTH_1000HZ : bma220.h
• BANDWIDTH_100HZ : bma020.h , bma150.h
• BANDWIDTH_125HZ : bma220.h
• BANDWIDTH_1500HZ : bma020.h , bma150.h
• BANDWIDTH_190HZ : bma020.h , bma150.h
• BANDWIDTH_250HZ : bma220.h
• BANDWIDTH_25HZ : bma020.h , bma150.h
• BANDWIDTH_32HZ : bma220.h
• BANDWIDTH_375HZ : bma020.h , bma150.h
• BANDWIDTH_500HZ : bma220.h
• BANDWIDTH_50HZ : bma020.h , bma150.h
• BANDWIDTH_64HZ : bma220.h
• BANDWIDTH_750HZ : bma020.h , bma150.h
• BANK_PID_DATA0 : usb_drv.h
• BANK_PID_DATA1 : usb_drv.h
• barrier : compiler.h
• base64_decode() : base64.h
• base64_encode() : base64.h
• base64_self_test() : base64.h
• base_dither_matrix : jquant1.c
• basic_table : jpeglib.h
• bCancelSwDelay : eic_example3.c , eic_example2.c
• BD_ADDR_LENGTH : btypes.h
• BD_LINKKEY_LENGTH : btypes.h
• BD_NAME_LENGTH : btypes.h
• bdatalog_start() : datalog.c , datalog.h
• be16_t : compiler.h
• be16_to_cpu : compiler.h
• BE16_TO_CPU : compiler.h
• be32_t : compiler.h
• be32_to_cpu : compiler.h
• BE32_TO_CPU : compiler.h
• bestcolor : jquant2.c
• BIG_ENDIAN : lwip-1.4.1/src/include/lwip/arch.h , lwip-1.4.0/src/include/lwip/arch.h , lwip-1.3.2/src/include/lwip/arch.h
• bindex_t : dlmalloc.c
• binmap_t : dlmalloc.c
• BIT_BUF_SIZE : jdhuff.h
• bit_buf_type : jdhuff.h
• bit_for_tree_index : dlmalloc.c
• bit_reverse16 : compiler.h
• bit_reverse32 : compiler.h
• bit_reverse64 : compiler.h
• bit_reverse8 : compiler.h
• bitfield : btypes.h
• bitfield_status : services/fs/fat/nav_automatic.c , applications/uc3-audio-player/nav_automatic.c
• BITREAD_LOAD_STATE : jdhuff.h
• BITREAD_SAVE_STATE : jdhuff.h
• BITREAD_STATE_VARS : jdhuff.h
• bits : jdmarker.c
• bits_ac_chrominance : jcparam.c
• bits_ac_luminance : jcparam.c
• bits_dc_chrominance : jcparam.c
• BITS_IN_JSAMPLE : jmorecfg.h
• bits_left : jdhuff.h
• bits_per_sample : pwm_dac.c , audio_mixer.c
• BKSPACE_CHAR : shell.h , fat_example.c , fsaccess_example.c
• bktALLOWABLE_MARGIN : AltBlock.c , blocktim.c
• bktDONT_BLOCK : AltBlock.c , blocktim.c
• bktPRIMARY_BLOCK_TIME : AltBlock.c , blocktim.c
• bktPRIMARY_PRIORITY : AltBlock.c , blocktim.c
• bktQUEUE_LENGTH : AltBlock.c , blocktim.c
• bktRUN_INDICATOR : AltBlock.c , blocktim.c
• bktSECONDARY_PRIORITY : AltBlock.c , blocktim.c
• bktSHORT_WAIT : AltBlock.c , blocktim.c
• bktTIME_TO_BLOCK : AltBlock.c , blocktim.c
• BLACK : et024006dhu.h
• blckqNUM_TASK_SETS : BlockQ.c , AltBlckQ.c
• blckqSTACK_SIZE : BlockQ.c , AltBlckQ.c
• BLINKING : print_funcs.h
• block_size : examples/adpcm_streaming/adpcm_example.c
• blocks_in_MCU : jcmaster.c , jdinput.c
• BLUE : et024006dhu.h
• BLUE_LEV : et024006dhu.h
• BMA020_ACC_X_LSB : bma020.h
• BMA020_ACC_X_MSB : bma020.h
• BMA020_ACC_Y_LSB : bma020.h
• BMA020_ACC_Y_MSB : bma020.h
• BMA020_ACC_Z_LSB : bma020.h
• BMA020_ACC_Z_MSB : bma020.h
• BMA020_ANY_MOTION_THRES : bma020.h
• bma020_bus_addr : sensor_dev.h
• BMA020_CHIP_ID : bma020.h
• BMA020_CHIP_VERSION : bma020.h
• BMA020_CTRL1 : bma020.h
• BMA020_CTRL2 : bma020.h
• BMA020_CTRL3 : bma020.h
• BMA020_CTRL4 : bma020.h
• BMA020_CTRL5 : bma020.h
• BMA020_CUST1 : bma020.h
• BMA020_CUST2 : bma020.h
• BMA020_DATA_RESOLUTION : bma020.h
• BMA020_DATA_SHIFT_RIGHT : bma020.h
• bma020_device_id() : bma020.c
• bma020_get_accel() : bma020.c
• BMA020_HG_DUR : bma020.h
• BMA020_HG_THRES : bma020.h
• BMA020_ID_VAL : bma020.h
• bma020_init() : sensor_dev.h , bma020.c , bma020.h
• bma020_ioctl() : bma020.c
• BMA020_LG_DUR : bma020.h
• BMA020_LG_THRES : bma020.h
• bma020_read() : bma020.c
• bma020_set_bandwidth() : bma020.c
• bma020_set_range() : bma020.c
• BMA020_SPI_MODE : bma020.h
• BMA020_STATUS1 : bma020.h
• BMA020_TWI_ADDR : bma020.h
• BMA150_ACC_X_LSB : bma150.h
• BMA150_ACC_X_MSB : bma150.h
• BMA150_ACC_Y_LSB : bma150.h
• BMA150_ACC_Y_MSB : bma150.h
• BMA150_ACC_Z_LSB : bma150.h
• BMA150_ACC_Z_MSB : bma150.h
• BMA150_ANY_MOTION_THRES : bma150.h
• bma150_bus_addr : sensor_dev.h
• BMA150_CHIP_ID : bma150.h
• BMA150_CHIP_VERSION : bma150.h
• BMA150_CTRL1 : bma150.h
• BMA150_CTRL2 : bma150.h
• BMA150_CTRL3 : bma150.h
• BMA150_CTRL4 : bma150.h
• BMA150_CTRL5 : bma150.h
• BMA150_CUST1 : bma150.h
• BMA150_CUST2 : bma150.h
• BMA150_DATA_RESOLUTION : bma150.h
• bma150_device_id() : bma150.c
• BMA150_EE_ANY_MOTION_THRES : bma150.h
• BMA150_EE_CTRL2 : bma150.h
• BMA150_EE_CTRL3 : bma150.h
• BMA150_EE_CTRL4 : bma150.h
• BMA150_EE_CTRL5 : bma150.h
• BMA150_EE_CUST1 : bma150.h
• BMA150_EE_CUST2 : bma150.h
• BMA150_EE_GAIN_OFF_T : bma150.h
• BMA150_EE_GAIN_OFF_X : bma150.h
• BMA150_EE_GAIN_OFF_Y : bma150.h
• BMA150_EE_GAIN_OFF_Z : bma150.h
• BMA150_EE_HG_DUR : bma150.h
• BMA150_EE_HG_THRES : bma150.h
• BMA150_EE_LG_DUR : bma150.h
• BMA150_EE_LG_THRES : bma150.h
• BMA150_EE_OFFSET_T : bma150.h
• BMA150_EE_OFFSET_X : bma150.h
• BMA150_EE_OFFSET_Y : bma150.h
• BMA150_EE_OFFSET_Z : bma150.h
• bma150_event() : bma150.c
• BMA150_GAIN_OFF_T : bma150.h
• BMA150_GAIN_OFF_X : bma150.h
• BMA150_GAIN_OFF_Y : bma150.h
• BMA150_GAIN_OFF_Z : bma150.h
• bma150_get_accel() : bma150.c
• bma150_get_temperature() : bma150.c
• bma150_get_threshold() : bma150.c
• BMA150_HG_DUR : bma150.h
• BMA150_HG_THRES : bma150.h
• BMA150_ID_VAL : bma150.h
• bma150_init() : sensor_dev.h , bma150.c , bma150.h
• bma150_ioctl() : bma150.c
• bma150_isr() : bma150.c
• BMA150_LG_DUR : bma150.h
• BMA150_LG_THRES : bma150.h
• BMA150_OFFSET_T : bma150.h
• BMA150_OFFSET_X : bma150.h
• BMA150_OFFSET_Y : bma150.h
• BMA150_OFFSET_Z : bma150.h
• bma150_orientation : sensors_xplained.h
• bma150_read() : bma150.c
• bma150_selftest() : bma150.c
• bma150_set_bandwidth() : bma150.c
• bma150_set_range() : bma150.c
• bma150_set_state() : bma150.c
• bma150_set_threshold() : bma150.c
• bma150_sigint : sensors_xplained.h
• bma150_sigout : sensors_xplained.h
• BMA150_SPI_MODE : bma150.h
• BMA150_STATUS1 : bma150.h
• BMA150_TEMP : bma150.h
• BMA150_TEMP_OFFSET : bma150.h
• BMA150_TWI_ADDR : bma150.h
• BMA180_ACC_X_LSB : bma180.h
• BMA180_ACC_X_MSB : bma180.h
• BMA180_ACC_Y_LSB : bma180.h
• BMA180_ACC_Y_MSB : bma180.h
• BMA180_ACC_Z_LSB : bma180.h
• BMA180_ACC_Z_MSB : bma180.h
• bma180_bus_addr : sensor_dev.h
• BMA180_BW_TCS : bma180.h
• BMA180_CD1 : bma180.h
• BMA180_CD2 : bma180.h
• BMA180_CHIP_ID : bma180.h
• BMA180_CHIP_VERSION : bma180.h
• BMA180_CTRL0 : bma180.h
• BMA180_CTRL1 : bma180.h
• BMA180_CTRL2 : bma180.h
• BMA180_CTRL3 : bma180.h
• BMA180_CTRL4 : bma180.h
• BMA180_DATA_RESOLUTION : bma180.h
• bma180_device_id() : bma180.c
• BMA180_EE_BW_TCS : bma180.h
• BMA180_EE_CD1 : bma180.h
• BMA180_EE_CD2 : bma180.h
• BMA180_EE_CTRL_REG3 : bma180.h
• BMA180_EE_CTRL_REG4 : bma180.h
• BMA180_EE_GAIN_T : bma180.h
• BMA180_EE_GAIN_X : bma180.h
• BMA180_EE_GAIN_Y : bma180.h
• BMA180_EE_GAIN_Z : bma180.h
• BMA180_EE_HIGH_DUR : bma180.h
• BMA180_EE_HIGH_LOW : bma180.h
• BMA180_EE_HIGH_TH : bma180.h
• BMA180_EE_HY : bma180.h
• BMA180_EE_LOW_DUR : bma180.h
• BMA180_EE_LOW_TH : bma180.h
• BMA180_EE_OFFSET_LSB1 : bma180.h
• BMA180_EE_OFFSET_LSB2 : bma180.h
• BMA180_EE_OFFSET_T : bma180.h
• BMA180_EE_OFFSET_X : bma180.h
• BMA180_EE_OFFSET_Y : bma180.h
• BMA180_EE_OFFSET_Z : bma180.h
• BMA180_EE_SLOPE_TAPSENS : bma180.h
• BMA180_EE_SLOPE_TH : bma180.h
• BMA180_EE_TAPSENS_TH : bma180.h
• BMA180_EE_TCO_X : bma180.h
• BMA180_EE_TCO_Y : bma180.h
• BMA180_EE_TCO_Z : bma180.h
• BMA180_GAIN_T : bma180.h
• BMA180_GAIN_X : bma180.h
• BMA180_GAIN_Y : bma180.h
• BMA180_GAIN_Z : bma180.h
• bma180_get_accel() : bma180.c
• bma180_get_temperature() : bma180.c
• BMA180_HIGH_DUR : bma180.h
• BMA180_HIGH_LOW_INFO : bma180.h
• BMA180_HIGH_TH : bma180.h
• BMA180_HY : bma180.h
• BMA180_ID_VAL : bma180.h
• bma180_init() : sensor_dev.h , bma180.c , bma180.h
• bma180_ioctl() : bma180.c
• BMA180_LOW_DUR : bma180.h
• BMA180_LOW_TH : bma180.h
• BMA180_OFFSET_LSB1 : bma180.h
• BMA180_OFFSET_LSB2 : bma180.h
• BMA180_OFFSET_T : bma180.h
• BMA180_OFFSET_X : bma180.h
• BMA180_OFFSET_Y : bma180.h
• BMA180_OFFSET_Z : bma180.h
• BMA180_RANGE_16G : bma180.h
• BMA180_RANGE_1_5G : bma180.h
• BMA180_RANGE_1G : bma180.h
• BMA180_RANGE_2G : bma180.h
• BMA180_RANGE_3G : bma180.h
• BMA180_RANGE_4G : bma180.h
• BMA180_RANGE_8G : bma180.h
• bma180_read() : bma180.c
• BMA180_RESET : bma180.h
• bma180_set_bandwidth() : bma180.c
• bma180_set_range() : bma180.c
• bma180_set_state() : bma180.c
• BMA180_SLOPE_TAPSENS_INFO : bma180.h
• BMA180_SLOPE_TH : bma180.h
• BMA180_SPI_MODE : bma180.h
• BMA180_STATUS1 : bma180.h
• BMA180_STATUS2 : bma180.h
• BMA180_STATUS3 : bma180.h
• BMA180_STATUS4 : bma180.h
• BMA180_TAPSENS_TH : bma180.h
• BMA180_TCO_X : bma180.h
• BMA180_TCO_Y : bma180.h
• BMA180_TCO_Z : bma180.h
• BMA180_TEMP : bma180.h
• BMA180_TEMP_OFFSET : bma180.h
• BMA180_TWI_ADDR : bma180.h
• BMA220_12_RSVD : bma220.h
• BMA220_13_RSVD : bma220.h
• BMA220_14_RSVD : bma220.h
• BMA220_15_RSVD : bma220.h
• BMA220_16_RSVD : bma220.h
• BMA220_BANDWIDTH_CONFIG : bma220.h
• bma220_bus_addr : sensor_dev.h
• BMA220_CHIP_ID : bma220.h
• BMA220_CHIP_VERSION : bma220.h
• BMA220_DATA_RESOLUTION : bma220.h
• bma220_device_id() : bma220.c
• BMA220_DIRECTION_CONFIG : bma220.h
• BMA220_DIRECTION_STATUS : bma220.h
• bma220_event() : bma220.c
• bma220_get_accel() : bma220.c
• bma220_get_threshold() : bma220.c
• BMA220_HG_CONFIG : bma220.h
• BMA220_HG_LG_THRESHOLD : bma220.h
• BMA220_ID_VAL : bma220.h
• bma220_init() : sensor_dev.h , bma220.c , bma220.h
• BMA220_INT_ENABLE1 : bma220.h
• BMA220_INT_ENABLE2 : bma220.h
• BMA220_INT_STATUS : bma220.h
• bma220_ioctl() : bma220.c
• bma220_isr() : bma220.c
• BMA220_LG_CONFIG : bma220.h
• BMA220_RANGE_SELFTEST : bma220.h
• bma220_read() : bma220.c
• bma220_register_t : bma220.h
• bma220_selftest() : bma220.c
• bma220_set_bandwidth() : bma220.c
• bma220_set_range() : bma220.c
• bma220_set_state() : bma220.c
• bma220_set_tap() : bma220.c
• bma220_set_threshold() : bma220.c
• BMA220_SLEEP_CONFIG : bma220.h
• bma220_sleep_en() : bma220.c
• BMA220_SLOPE_CONFIG : bma220.h
• BMA220_SOFTRESET : bma220.h
• BMA220_SPI_MODE : bma220.h
• BMA220_SPI_MODE_SELECT : bma220.h
• BMA220_SUSPEND_MODE : bma220.h
• BMA220_TAP_CONFIG : bma220.h
• BMA220_TWI_ADDR : bma220.h
• BMA220_X_AXIS_DATA : bma220.h
• BMA220_Y_AXIS_DATA : bma220.h
• BMA220_Z_AXIS_DATA : bma220.h
• BMA220_ZERO_G_OFFSET : bma220.h
• BMA222_01_RSVD : bma222.h
• BMA222_0D_RSVD : bma222.h
• BMA222_0E_RSVD : bma222.h
• BMA222_12_RSVD : bma222.h
• BMA222_15_RSVD : bma222.h
• BMA222_16_INTR_EN : bma222.h
• BMA222_17_INTR_EN : bma222.h
• BMA222_18_RSVD : bma222.h
• BMA222_19_INTR_MAP : bma222.h
• BMA222_1A_INTR_MAP : bma222.h
• BMA222_1B_INTR_MAP : bma222.h
• BMA222_1C_RSVD : bma222.h
• BMA222_1D_RSVD : bma222.h
• BMA222_1F_RSVD : bma222.h
• BMA222_29_RSVD : bma222.h
• BMA222_30_RSVD : bma222.h
• BMA222_31_RSVD : bma222.h
• BMA222_35_RSVD : bma222.h
• BMA222_ACC_X : bma222.h
• BMA222_ACC_Y : bma222.h
• BMA222_ACC_Z : bma222.h
• BMA222_BANDWIDTH : bma222.h
• BMA222_BANDWIDTH_1000Hz : bma222.h
• BMA222_BANDWIDTH_125Hz : bma222.h
• BMA222_BANDWIDTH_16Hz : bma222.h
• BMA222_BANDWIDTH_250Hz : bma222.h
• BMA222_BANDWIDTH_31Hz : bma222.h
• BMA222_BANDWIDTH_500Hz : bma222.h
• BMA222_BANDWIDTH_63Hz : bma222.h
• BMA222_BANDWIDTH_8Hz : bma222.h
• bma222_bus_addr : sensor_dev.h
• BMA222_CHIP_ID : bma222.h
• BMA222_D_TAP_EN : bma222.h
• BMA222_D_TAP_INT : bma222.h
• BMA222_DATA_EN : bma222.h
• BMA222_DATA_HIGH_BW : bma222.h
• BMA222_DATA_INT : bma222.h
• BMA222_DATA_RESOLUTION : bma222.h
• BMA222_DATA_UNFILTERED : bma222.h
• bma222_device_id() : bma222.c
• BMA222_DIGITAL_IO_CONTROL : bma222.h
• BMA222_EEPROM_CONTROL : bma222.h
• bma222_event() : bma222.c
• BMA222_EVENT_HYSTERESIS : bma222.h
• BMA222_FAST_OFFSET_COMP : bma222.h
• BMA222_FLAT : bma222.h
• BMA222_FLAT_EN : bma222.h
• BMA222_FLAT_HOLD_TIME : bma222.h
• BMA222_FLAT_INT : bma222.h
• BMA222_FLAT_THETA : bma222.h
• BMA222_G_RANGE : bma222.h
• bma222_get_accel() : bma222.c
• bma222_get_temperature() : bma222.c
• bma222_get_threshold() : bma222.c
• BMA222_HIGH_EN_X : bma222.h
• BMA222_HIGH_EN_Y : bma222.h
• BMA222_HIGH_EN_Z : bma222.h
• BMA222_HIGH_FIRST_X : bma222.h
• BMA222_HIGH_FIRST_Y : bma222.h
• BMA222_HIGH_FIRST_Z : bma222.h
• BMA222_HIGH_G_DURATION : bma222.h
• BMA222_HIGH_G_THRESHOLD : bma222.h
• BMA222_HIGH_INT : bma222.h
• BMA222_HIGH_SIGN_NEG : bma222.h
• BMA222_ID_VAL : bma222.h
• bma222_init() : sensor_dev.h , bma222.c , bma222.h
• BMA222_INT1_D_TAP : bma222.h
• BMA222_INT1_DATA : bma222.h
• BMA222_INT1_FLAT : bma222.h
• BMA222_INT1_HIGH : bma222.h
• BMA222_INT1_LOW : bma222.h
• BMA222_INT1_LVL_1 : bma222.h
• BMA222_INT1_OD : bma222.h
• BMA222_INT1_ORIENT : bma222.h
• BMA222_INT1_S_TAP : bma222.h
• BMA222_INT1_SLOPE : bma222.h
• BMA222_INT2_D_TAP : bma222.h
• BMA222_INT2_DATA : bma222.h
• BMA222_INT2_FLAT : bma222.h
• BMA222_INT2_HIGH : bma222.h
• BMA222_INT2_LOW : bma222.h
• BMA222_INT2_LVL_1 : bma222.h
• BMA222_INT2_OD : bma222.h
• BMA222_INT2_ORIENT : bma222.h
• BMA222_INT2_S_TAP : bma222.h
• BMA222_INT2_SLOPE : bma222.h
• BMA222_INT_LATCHED : bma222.h
• BMA222_INT_NON_LATCHED : bma222.h
• BMA222_INT_SRC_DATA : bma222.h
• BMA222_INT_SRC_HIGH : bma222.h
• BMA222_INT_SRC_LOW : bma222.h
• BMA222_INT_SRC_SLOPE : bma222.h
• BMA222_INT_SRC_TAP : bma222.h
• BMA222_INT_TMP_12_5ms : bma222.h
• BMA222_INT_TMP_1ms : bma222.h
• BMA222_INT_TMP_1sec : bma222.h
• BMA222_INT_TMP_250ms : bma222.h
• BMA222_INT_TMP_25ms : bma222.h
• BMA222_INT_TMP_2sec : bma222.h
• BMA222_INT_TMP_4sec : bma222.h
• BMA222_INT_TMP_500ms : bma222.h
• BMA222_INT_TMP_500us : bma222.h
• BMA222_INT_TMP_50ms : bma222.h
• BMA222_INT_TMP_8sec : bma222.h
• BMA222_INTR_DATA_SRC : bma222.h
• BMA222_INTR_PIN_CONFIG : bma222.h
• BMA222_INTR_PIN_MODE : bma222.h
• BMA222_INTR_STATUS : bma222.h
• bma222_ioctl() : bma222.c
• bma222_isr() : bma222.c
• BMA222_LOW_EN : bma222.h
• BMA222_LOW_G_DURATION : bma222.h
• BMA222_LOW_G_THRESHOLD : bma222.h
• BMA222_LOW_INT : bma222.h
• BMA222_LOWPOWER_EN : bma222.h
• BMA222_NEW_DATA_STATUS : bma222.h
• BMA222_NEW_DATA_X : bma222.h
• BMA222_NEW_DATA_Y : bma222.h
• BMA222_NEW_DATA_Z : bma222.h
• BMA222_OFFSET_FILT_X : bma222.h
• BMA222_OFFSET_FILT_Y : bma222.h
• BMA222_OFFSET_FILT_Z : bma222.h
• BMA222_OFFSET_UNFILT_X : bma222.h
• BMA222_OFFSET_UNFILT_Y : bma222.h
• BMA222_OFFSET_UNFILT_Z : bma222.h
• BMA222_ORIENT_EN : bma222.h
• BMA222_ORIENT_INT : bma222.h
• BMA222_ORIENTATION_CONFIG : bma222.h
• BMA222_ORIENTATION_STATUS : bma222.h
• BMA222_ORIENTATION_THETA : bma222.h
• BMA222_POWER_MODES : bma222.h
• BMA222_RANGE_16G : bma222.h
• BMA222_RANGE_2G : bma222.h
• BMA222_RANGE_4G : bma222.h
• BMA222_RANGE_8G : bma222.h
• bma222_read() : bma222.c
• bma222_register_t : bma222.h
• BMA222_RESET : bma222.h
• BMA222_RESET_INT : bma222.h
• BMA222_S_TAP_EN : bma222.h
• BMA222_S_TAP_INT : bma222.h
• BMA222_SELF_TEST_AXIS_X : bma222.h
• BMA222_SELF_TEST_AXIS_Y : bma222.h
• BMA222_SELF_TEST_AXIS_Z : bma222.h
• BMA222_SELF_TEST_NONE : bma222.h
• bma222_selftest() : bma222.c
• BMA222_SENSOR_SELF_TEST : bma222.h
• bma222_set_bandwidth() : bma222.c
• bma222_set_range() : bma222.c
• bma222_set_state() : bma222.c
• bma222_set_tap() : bma222.c
• bma222_set_threshold() : bma222.c
• BMA222_SLEEP_DUR_0_5ms : bma222.h
• BMA222_SLEEP_DUR_1000ms : bma222.h
• BMA222_SLEEP_DUR_100ms : bma222.h
• BMA222_SLEEP_DUR_10ms : bma222.h
• BMA222_SLEEP_DUR_1ms : bma222.h
• BMA222_SLEEP_DUR_25ms : bma222.h
• BMA222_SLEEP_DUR_2ms : bma222.h
• BMA222_SLEEP_DUR_4ms : bma222.h
• BMA222_SLEEP_DUR_500ms : bma222.h
• BMA222_SLEEP_DUR_50ms : bma222.h
• BMA222_SLEEP_DUR_6ms : bma222.h
• bma222_sleep_en() : bma222.c
• BMA222_SLOPE_DURATION : bma222.h
• BMA222_SLOPE_EN_X : bma222.h
• BMA222_SLOPE_EN_Y : bma222.h
• BMA222_SLOPE_EN_Z : bma222.h
• BMA222_SLOPE_FIRST_X : bma222.h
• BMA222_SLOPE_FIRST_Y : bma222.h
• BMA222_SLOPE_FIRST_Z : bma222.h
• BMA222_SLOPE_INT : bma222.h
• BMA222_SLOPE_SIGN_POS : bma222.h
• BMA222_SLOPE_THRESHOLD : bma222.h
• BMA222_SLOW_OFFSET_COMP : bma222.h
• BMA222_SOFTRESET : bma222.h
• BMA222_SPI_MODE : bma222.h
• BMA222_SUSPEND : bma222.h
• BMA222_TAP_CONFIG : bma222.h
• BMA222_TAP_FIRST_X : bma222.h
• BMA222_TAP_FIRST_Y : bma222.h
• BMA222_TAP_FIRST_Z : bma222.h
• BMA222_TAP_SAMP_FIELD : bma222.h
• BMA222_TAP_SIGN_POS : bma222.h
• BMA222_TAP_SLOPE_STATUS : bma222.h
• BMA222_TAP_TH_FIELD : bma222.h
• BMA222_TAP_TIMING : bma222.h
• BMA222_TEMP : bma222.h
• BMA222_TEMP_OFFSET : bma222.h
• BMA222_TWI_ADDR : bma222.h
• BMA222_XY_LANDSCAPE_L : bma222.h
• BMA222_XY_LANDSCAPE_R : bma222.h
• BMA222_XY_PORTRAIT_DOWN : bma222.h
• BMA222_XY_PORTRAIT_UP : bma222.h
• BMA222_Z_DOWN : bma222.h
• BMA250_01_RSVD : bma250.h
• BMA250_0D_RSVD : bma250.h
• BMA250_0E_RSVD : bma250.h
• BMA250_12_RSVD : bma250.h
• BMA250_15_RSVD : bma250.h
• BMA250_16_INTR_EN : bma250.h
• BMA250_17_INTR_EN : bma250.h
• BMA250_18_RSVD : bma250.h
• BMA250_19_INTR_MAP : bma250.h
• BMA250_1A_INTR_MAP : bma250.h
• BMA250_1B_INTR_MAP : bma250.h
• BMA250_1C_RSVD : bma250.h
• BMA250_1D_RSVD : bma250.h
• BMA250_1F_RSVD : bma250.h
• BMA250_29_RSVD : bma250.h
• BMA250_30_RSVD : bma250.h
• BMA250_31_RSVD : bma250.h
• BMA250_35_RSVD : bma250.h
• BMA250_ACC_X : bma250.h
• BMA250_ACC_Y : bma250.h
• BMA250_ACC_Z : bma250.h
• BMA250_BANDWIDTH : bma250.h
• BMA250_BANDWIDTH_1000Hz : bma250.h
• BMA250_BANDWIDTH_125Hz : bma250.h
• BMA250_BANDWIDTH_16Hz : bma250.h
• BMA250_BANDWIDTH_250Hz : bma250.h
• BMA250_BANDWIDTH_31Hz : bma250.h
• BMA250_BANDWIDTH_500Hz : bma250.h
• BMA250_BANDWIDTH_63Hz : bma250.h
• BMA250_BANDWIDTH_8Hz : bma250.h
• bma250_bus_addr : sensor_dev.h
• BMA250_CHIP_ID : bma250.h
• BMA250_D_TAP_EN : bma250.h
• BMA250_D_TAP_INT : bma250.h
• BMA250_DATA_EN : bma250.h
• BMA250_DATA_HIGH_BW : bma250.h
• BMA250_DATA_INT : bma250.h
• BMA250_DATA_RESOLUTION : bma250.h
• BMA250_DATA_UNFILTERED : bma250.h
• bma250_device_id() : bma250.c
• BMA250_DIGITAL_IO_CONTROL : bma250.h
• BMA250_EEPROM_CONTROL : bma250.h
• bma250_event() : bma250.c
• BMA250_EVENT_HYSTERESIS : bma250.h
• BMA250_FAST_OFFSET_COMP : bma250.h
• BMA250_FLAT : bma250.h
• BMA250_FLAT_EN : bma250.h
• BMA250_FLAT_HOLD_TIME : bma250.h
• BMA250_FLAT_INT : bma250.h
• BMA250_FLAT_THETA : bma250.h
• BMA250_G_RANGE : bma250.h
• bma250_get_accel() : bma250.c
• bma250_get_temperature() : bma250.c
• bma250_get_threshold() : bma250.c
• BMA250_HIGH_EN_X : bma250.h
• BMA250_HIGH_EN_Y : bma250.h
• BMA250_HIGH_EN_Z : bma250.h
• BMA250_HIGH_FIRST_X : bma250.h
• BMA250_HIGH_FIRST_Y : bma250.h
• BMA250_HIGH_FIRST_Z : bma250.h
• BMA250_HIGH_G_DURATION : bma250.h
• BMA250_HIGH_G_THRESHOLD : bma250.h
• BMA250_HIGH_INT : bma250.h
• BMA250_HIGH_SIGN_NEG : bma250.h
• BMA250_ID_VAL : bma250.h
• bma250_init() : sensor_dev.h , bma250.c , bma250.h
• BMA250_INT1_D_TAP : bma250.h
• BMA250_INT1_DATA : bma250.h
• BMA250_INT1_FLAT : bma250.h
• BMA250_INT1_HIGH : bma250.h
• BMA250_INT1_LOW : bma250.h
• BMA250_INT1_LVL_1 : bma250.h
• BMA250_INT1_OD : bma250.h
• BMA250_INT1_ORIENT : bma250.h
• BMA250_INT1_S_TAP : bma250.h
• BMA250_INT1_SLOPE : bma250.h
• BMA250_INT2_D_TAP : bma250.h
• BMA250_INT2_DATA : bma250.h
• BMA250_INT2_FLAT : bma250.h
• BMA250_INT2_HIGH : bma250.h
• BMA250_INT2_LOW : bma250.h
• BMA250_INT2_LVL_1 : bma250.h
• BMA250_INT2_OD : bma250.h
• BMA250_INT2_ORIENT : bma250.h
• BMA250_INT2_S_TAP : bma250.h
• BMA250_INT2_SLOPE : bma250.h
• BMA250_INT_LATCHED : bma250.h
• BMA250_INT_NON_LATCHED : bma250.h
• BMA250_INT_SRC_DATA : bma250.h
• BMA250_INT_SRC_HIGH : bma250.h
• BMA250_INT_SRC_LOW : bma250.h
• BMA250_INT_SRC_SLOPE : bma250.h
• BMA250_INT_SRC_TAP : bma250.h
• BMA250_INT_TMP_12_5ms : bma250.h
• BMA250_INT_TMP_1ms : bma250.h
• BMA250_INT_TMP_1sec : bma250.h
• BMA250_INT_TMP_250ms : bma250.h
• BMA250_INT_TMP_25ms : bma250.h
• BMA250_INT_TMP_2sec : bma250.h
• BMA250_INT_TMP_4sec : bma250.h
• BMA250_INT_TMP_500ms : bma250.h
• BMA250_INT_TMP_500us : bma250.h
• BMA250_INT_TMP_50ms : bma250.h
• BMA250_INT_TMP_8sec : bma250.h
• BMA250_INTR_DATA_SRC : bma250.h
• BMA250_INTR_PIN_CONFIG : bma250.h
• BMA250_INTR_PIN_MODE : bma250.h
• BMA250_INTR_STATUS : bma250.h
• bma250_ioctl() : bma250.c
• bma250_isr() : bma250.c
• BMA250_LOW_EN : bma250.h
• BMA250_LOW_G_DURATION : bma250.h
• BMA250_LOW_G_THRESHOLD : bma250.h
• BMA250_LOW_INT : bma250.h
• BMA250_LOWPOWER_EN : bma250.h
• BMA250_NEW_DATA_STATUS : bma250.h
• BMA250_NEW_DATA_X : bma250.h
• BMA250_NEW_DATA_Y : bma250.h
• BMA250_NEW_DATA_Z : bma250.h
• BMA250_OFFSET_FILT_X : bma250.h
• BMA250_OFFSET_FILT_Y : bma250.h
• BMA250_OFFSET_FILT_Z : bma250.h
• BMA250_OFFSET_UNFILT_X : bma250.h
• BMA250_OFFSET_UNFILT_Y : bma250.h
• BMA250_OFFSET_UNFILT_Z : bma250.h
• BMA250_ORIENT_EN : bma250.h
• BMA250_ORIENT_INT : bma250.h
• BMA250_ORIENTATION_CONFIG : bma250.h
• BMA250_ORIENTATION_STATUS : bma250.h
• BMA250_ORIENTATION_THETA : bma250.h
• BMA250_POWER_MODES : bma250.h
• BMA250_RANGE_16G : bma250.h
• BMA250_RANGE_2G : bma250.h
• BMA250_RANGE_4G : bma250.h
• BMA250_RANGE_8G : bma250.h
• bma250_read() : bma250.c
• bma250_register_t : bma250.h
• BMA250_RESET : bma250.h
• BMA250_RESET_INT : bma250.h
• BMA250_S_TAP_EN : bma250.h
• BMA250_S_TAP_INT : bma250.h
• BMA250_SELF_TEST_AXIS_X : bma250.h
• BMA250_SELF_TEST_AXIS_Y : bma250.h
• BMA250_SELF_TEST_AXIS_Z : bma250.h
• BMA250_SELF_TEST_NONE : bma250.h
• bma250_selftest() : bma250.c
• BMA250_SENSOR_SELF_TEST : bma250.h
• bma250_set_bandwidth() : bma250.c
• bma250_set_range() : bma250.c
• bma250_set_state() : bma250.c
• bma250_set_tap() : bma250.c
• bma250_set_threshold() : bma250.c
• BMA250_SLEEP_DUR_0_5ms : bma250.h
• BMA250_SLEEP_DUR_1000ms : bma250.h
• BMA250_SLEEP_DUR_100ms : bma250.h
• BMA250_SLEEP_DUR_10ms : bma250.h
• BMA250_SLEEP_DUR_1ms : bma250.h
• BMA250_SLEEP_DUR_25ms : bma250.h
• BMA250_SLEEP_DUR_2ms : bma250.h
• BMA250_SLEEP_DUR_4ms : bma250.h
• BMA250_SLEEP_DUR_500ms : bma250.h
• BMA250_SLEEP_DUR_50ms : bma250.h
• BMA250_SLEEP_DUR_6ms : bma250.h
• bma250_sleep_en() : bma250.c
• BMA250_SLOPE_DURATION : bma250.h
• BMA250_SLOPE_EN_X : bma250.h
• BMA250_SLOPE_EN_Y : bma250.h
• BMA250_SLOPE_EN_Z : bma250.h
• BMA250_SLOPE_FIRST_X : bma250.h
• BMA250_SLOPE_FIRST_Y : bma250.h
• BMA250_SLOPE_FIRST_Z : bma250.h
• BMA250_SLOPE_INT : bma250.h
• BMA250_SLOPE_SIGN_POS : bma250.h
• BMA250_SLOPE_THRESHOLD : bma250.h
• BMA250_SLOW_OFFSET_COMP : bma250.h
• BMA250_SOFTRESET : bma250.h
• BMA250_SPI_MODE : bma250.h
• BMA250_SUSPEND : bma250.h
• BMA250_TAP_CONFIG : bma250.h
• BMA250_TAP_FIRST_X : bma250.h
• BMA250_TAP_FIRST_Y : bma250.h
• BMA250_TAP_FIRST_Z : bma250.h
• BMA250_TAP_SAMP_FIELD : bma250.h
• BMA250_TAP_SIGN_POS : bma250.h
• BMA250_TAP_SLOPE_STATUS : bma250.h
• BMA250_TAP_TH_FIELD : bma250.h
• BMA250_TAP_TIMING : bma250.h
• BMA250_TEMP : bma250.h
• BMA250_TEMP_OFFSET : bma250.h
• BMA250_TWI_ADDR : bma250.h
• BMA250_XY_LANDSCAPE_L : bma250.h
• BMA250_XY_LANDSCAPE_R : bma250.h
• BMA250_XY_PORTRAIT_DOWN : bma250.h
• BMA250_XY_PORTRAIT_UP : bma250.h
• BMA250_Z_DOWN : bma250.h
• bma_axis10_val() : bma_axis.inc.h
• bma_axis14_val() : bma_axis.inc.h
• bma_axis8_val() : bma_axis.inc.h
• bmattributes : drivers/usbb/_asf_v1/enum/host/usb_host_enum.c , applications/uc3-audio-player/usb_host_enum.h , drivers/usbb/_asf_v1/enum/host/usb_host_enum.h , applications/uc3-audio-player/usb_host_enum.c
• BMCR_ANENABLE : macb.h
• BMCR_ANRESTART : macb.h
• BMCR_CTST : macb.h
• BMCR_FULLDPLX : macb.h
• BMCR_ISOLATE : macb.h
• BMCR_LOOPBACK : macb.h
• BMCR_PDOWN : macb.h
• BMCR_RESET : macb.h
• BMCR_RESV : macb.h
• BMCR_SPEED100 : macb.h
• bMMI_start() : mmi.c , mmi.h
• bmp085_bus_addr : sensor_dev.h
• BMP085_ID_VAL : bmp.h
• bmp085_init() : bmp.h , bmp.c , sensor_dev.h
• BMP085_VER_VAL : bmp.h
• bmp180_bus_addr : sensor_dev.h
• BMP180_ID_VAL : bmp.h
• bmp180_init() : bmp.c , bmp.h , sensor_dev.h
• BMP180_VER_VAL : bmp.h
• BMP_CHIP_ID : bmp.h
• BMP_CHIP_VERSION : bmp.h
• BMP_CONTROL : bmp.h
• BMP_DATA_LSB : bmp.h
• BMP_DATA_MSB : bmp.h
• BMP_DATA_XLSB : bmp.h
• bmp_device_id() : bmp.c
• BMP_EEPROM_ADDR : bmp.h
• BMP_EEPROM_SIZE_BYTES : bmp.h
• bmp_eoc_wait() : bmp.c
• bmp_get_cal_param() : bmp.c
• bmp_get_pressure() : bmp.c
• bmp_get_temperature() : bmp.c
• bmp_get_up() : bmp.c
• bmp_get_ut() : bmp.c
• bmp_ioctl() : bmp.c
• BMP_MAX_COUNTS : bmp.h
• BMP_MAX_hPa : bmp.h
• BMP_MIN_COUNTS : bmp.h
• BMP_MIN_hPa : bmp.h
• BMP_PRESS_READ : bmp.h
• bmp_read() : bmp.c
• BMP_RESET_CMD : bmp.h
• BMP_RESOLUTION : bmp.c
• bmp_set_state() : bmp.c
• BMP_SOFT_RESET : bmp.h
• BMP_TEMP_READ : bmp.h
• BMP_TWI_ADDR : bmp.h
• bmRequestType : usb_standard_request.c
• BMSR_100BASE4 : macb.h
• BMSR_100FULL : macb.h
• BMSR_100FULL2 : macb.h
• BMSR_100HALF : macb.h
• BMSR_100HALF2 : macb.h
• BMSR_10FULL : macb.h
• BMSR_10HALF : macb.h
• BMSR_ANEGCAPABLE : macb.h
• BMSR_ANEGCOMPLETE : macb.h
• BMSR_ERCAP : macb.h
• BMSR_ESTATEN : macb.h
• BMSR_JCD : macb.h
• BMSR_LSTATUS : macb.h
• BMSR_RESV : macb.h
• BMSR_RFAULT : macb.h
• board_init() : spbfw_download/ports/avr32/board_init.c , ports/avr32/board_init.h , ports/avr32/board_init.c , spbfw_download/ports/avr32/board_init.h , board.h
• BOARD_OSC0_HZ : uc3a0_a1/osc.h
• BOARD_OSC0_IS_XTAL : uc3a0_a1/osc.h
• BOARD_OSC0_STARTUP_US : uc3a0_a1/osc.h
• BOARD_OSC1_HZ : uc3a0_a1/osc.h
• BOARD_OSC1_IS_XTAL : uc3a0_a1/osc.h
• BOARD_OSC1_STARTUP_US : uc3a0_a1/osc.h
• BOARD_OSC32_HZ : uc3a0_a1/osc.h
• BOARD_OSC32_IS_XTAL : uc3a0_a1/osc.h
• BOARD_OSC32_STARTUP_US : uc3a0_a1/osc.h
• board_putchar() : spbfw_download/ports/avr32/board_init.c , ports/avr32/board_init.c
• BOARD_QT_DEVICE_ADDRESS : qt_i2c.h
• BOARD_QT_TWI_INSTANCE : qt_i2c.h
• BOARD_RS232_0 : spbfw_download/ports/avr32/board_init.h , ports/avr32/board_init.h
• BOARD_RS232_0_RX : spbfw_download/ports/avr32/board_init.h , ports/avr32/board_init.h
• BOARD_RS232_0_TX : ports/avr32/board_init.h , spbfw_download/ports/avr32/board_init.h
• BOARD_RS232_1 : spbfw_download/ports/avr32/board_init.h , ports/avr32/board_init.h
• BOARD_RS232_1_RX : spbfw_download/ports/avr32/board_init.h , ports/avr32/board_init.h
• BOARD_RS232_1_TX : spbfw_download/ports/avr32/board_init.h , ports/avr32/board_init.h
• board_spi_select_id_t : uc3_spi/spi_master.h , uc3_usart_spi/usart_spi.h
• BOLD : print_funcs.h
• Bool : compiler.h
• bool : compiler.h
• boolean : btypes.h , jmorecfg.h
• BOOT_CFG1 : boot.h
• BOOT_CFG1_ADDRESS : boot.h
• BOOT_CFG1_BOOT_KEY1 : boot.h
• BOOT_CFG1_BOOT_KEY1_MASK : boot.h
• BOOT_CFG1_BOOT_KEY1_OFFSET : boot.h
• BOOT_CFG1_BOOT_KEY1_SIZE : boot.h
• BOOT_CFG1_BOOT_KEY1_VALUE : boot.h
• BOOT_CFG1_CRC8 : boot.h
• BOOT_CFG1_CRC8_MASK : boot.h
• BOOT_CFG1_CRC8_OFFSET : boot.h
• BOOT_CFG1_CRC8_POLYNOMIAL : boot.h
• BOOT_CFG1_CRC8_SIZE : boot.h
• BOOT_CFG1_FORCE : boot.h
• BOOT_CFG1_FORCE_MASK : boot.h
• BOOT_CFG1_FORCE_OFFSET : boot.h
• BOOT_CFG1_FORCE_SIZE : boot.h
• BOOT_CFG1_IO_COND_EN : boot.h
• BOOT_CFG1_IO_COND_EN_MASK : boot.h
• BOOT_CFG1_IO_COND_EN_OFFSET : boot.h
• BOOT_CFG1_IO_COND_EN_SIZE : boot.h
• BOOT_CFG1_OFFSET : boot.h
• BOOT_CFG1_SIZE : boot.h
• BOOT_CFG2 : boot.h
• BOOT_CFG2_ADDRESS : boot.h
• BOOT_CFG2_BOOT_KEY : boot.h
• BOOT_CFG2_BOOT_KEY_MASK : boot.h
• BOOT_CFG2_BOOT_KEY_OFFSET : boot.h
• BOOT_CFG2_BOOT_KEY_SIZE : boot.h
• BOOT_CFG2_BOOT_KEY_VALUE : boot.h
• BOOT_CFG2_CRC8 : boot.h
• BOOT_CFG2_CRC8_MASK : boot.h
• BOOT_CFG2_CRC8_OFFSET : boot.h
• BOOT_CFG2_CRC8_POLYNOMIAL : boot.h
• BOOT_CFG2_CRC8_SIZE : boot.h
• BOOT_CFG2_IO_COND_LEVEL : boot.h
• BOOT_CFG2_IO_COND_LEVEL_MASK : boot.h
• BOOT_CFG2_IO_COND_LEVEL_OFFSET : boot.h
• BOOT_CFG2_IO_COND_LEVEL_SIZE : boot.h
• BOOT_CFG2_IO_COND_PIN : boot.h
• BOOT_CFG2_IO_COND_PIN_MASK : boot.h
• BOOT_CFG2_IO_COND_PIN_OFFSET : boot.h
• BOOT_CFG2_IO_COND_PIN_SIZE : boot.h
• BOOT_CFG2_OFFSET : boot.h
• BOOT_CFG2_SIZE : boot.h
• BOOT_KEY : boot.h
• BOOT_KEY_ADDRESS : boot.h
• BOOT_KEY_OFFSET : boot.h
• BOOT_KEY_SIZE : boot.h
• BOOT_KEY_VALUE : boot.h
• BOOT_SUBCLASS : usb_ids.h
• box : gui.c
• BOX_C0_ELEMS : jquant2.c
• BOX_C0_LOG : jquant2.c
• BOX_C0_SHIFT : jquant2.c
• BOX_C1_ELEMS : jquant2.c
• BOX_C1_LOG : jquant2.c
• BOX_C1_SHIFT : jquant2.c
• BOX_C2_ELEMS : jquant2.c
• BOX_C2_LOG : jquant2.c
• BOX_C2_SHIFT : jquant2.c
• boxlist : jquant2.c
• boxptr : jquant2.c
• bptr : jmemmgr.c
• BR_REQUEST_GET_CUR : usb_audio.h
• BR_REQUEST_GET_MAX : usb_audio.h
• BR_REQUEST_GET_MIN : usb_audio.h
• BR_REQUEST_GET_RES : usb_audio.h
• BR_REQUEST_SET_CUR : usb_audio.h
• BR_REQUEST_SET_MAX : usb_audio.h
• BR_REQUEST_SET_MIN : usb_audio.h
• BR_REQUEST_SET_RES : usb_audio.h
• BRIDGE_TIED_LOAD : tpa6130.c
• BROKEN_STREAM_TIMER : usb_stream_player_with_cs2200.c , usb_stream_player_with_resampling.c
• broken_stream_timer : usb_stream_player.c , usb_stream_player_with_cs2200.c , usb_stream_player_with_resampling.c
• BROKEN_STREAM_TIMER : usb_stream_player.c
• bsensor_start() : avr32/applications/evk1100-control-panel/sensors/sensor.c , avr32/applications/evk1100-control-panel/sensors/sensor.h
• BSP_CPU_ClkFreq() : bsp-evk1105.c , bsp.h
• BSP_FLASHC_SetWaitState() : bsp-evk1105.c
• BSP_GPIO_IntFlagClr() : bsp.h , bsp-evk1105.c
• BSP_GPIO_IntFlagRd() : bsp-evk1105.c , bsp.h
• BSP_GPIO_PinClr() : bsp.h , bsp-evk1105.c
• BSP_GPIO_PinGet() : bsp-evk1105.c , bsp.h
• BSP_GPIO_PinSet() : bsp.h , bsp-evk1105.c
• BSP_GPIO_PinTgl() : bsp-evk1105.c , bsp.h
• BSP_GPIO_SetFnct() : bsp.h , bsp-evk1105.c
• BSP_GPIO_SetIntMode() : bsp.h , bsp-evk1105.c
• BSP_Init() : bsp.h , bsp-evk1105.c
• BSP_INT_FALLING_EDGE : bsp.h
• BSP_INT_PIN_CHANGE : bsp.h
• BSP_INT_RISING_EDGE : bsp.h
• BSP_INTC_ERR_INVALID_IRQ : bsp.h
• BSP_INTC_ERR_NONE : bsp.h
• BSP_INTC_FastIntReg() : bsp.h , bsp-evk1105.c
• BSP_INTC_HANDLER : bsp-evk1105.c
• BSP_INTC_Handlers : bsp-evk1105.c
• BSP_INTC_Init() : bsp-evk1105.c
• BSP_INTC_INT0 : bsp-evk1105.c
• BSP_INTC_INT1 : bsp-evk1105.c
• BSP_INTC_INT2 : bsp-evk1105.c
• BSP_INTC_INT3 : bsp-evk1105.c
• BSP_INTC_INT_LEVELS : bsp.h
• BSP_INTC_IntGetHandler() : bsp-evk1105.c
• BSP_INTC_IntReg() : bsp.h , bsp-evk1105.c
• BSP_INTC_IntUnhandled() : bsp-evk1105.c
• BSP_INTC_IPR_INTLEVEL_OFFSET : bsp-evk1105.c
• BSP_INTC_IRQS_PER_GRP : bsp-evk1105.c
• BSP_IRQ_COMPARE : bsp-evk1105.c
• BSP_PBA_ClkFreq() : bsp.h , bsp-evk1105.c
• BSP_PBB_ClkFreq() : bsp-evk1105.c , bsp.h
• BSP_PM_ClkSelect() : bsp-evk1105.c
• BSP_PM_ClkSwitch() : bsp-evk1105.c
• BSP_PM_GClkSetup() : bsp-evk1105.c
• BSP_PM_OSC0Setup() : bsp-evk1105.c
• BSP_PM_PLL0Setup() : bsp-evk1105.c
• BSP_TmrInit() : bsp-evk1105.c
• BSP_TmrReload() : bsp-evk1105.c
• BSP_TmrTickISR() : bsp-evk1105.c
• BSP_USART0_RXD_FUNCTION : bsp-evk1105.c
• BSP_USART0_RXD_PIN : bsp-evk1105.c
• BSP_USART0_TXD_FUNCTION : bsp-evk1105.c
• BSP_USART0_TXD_PIN : bsp-evk1105.c
• BSP_USART1_RXD_FUNCTION : bsp-evk1105.c
• BSP_USART1_RXD_PIN : bsp-evk1105.c
• BSP_USART1_TXD_FUNCTION : bsp-evk1105.c
• BSP_USART1_TXD_PIN : bsp-evk1105.c
• BSP_USART2_RXD_FUNCTION : bsp-evk1105.c
• BSP_USART2_RXD_PIN : bsp-evk1105.c
• BSP_USART2_TXD_FUNCTION : bsp-evk1105.c
• BSP_USART2_TXD_PIN : bsp-evk1105.c
• BSP_USART3_RXD_FUNCTION : bsp-evk1105.c
• BSP_USART3_RXD_PIN : bsp-evk1105.c
• BSP_USART3_TXD_FUNCTION : bsp-evk1105.c
• BSP_USART3_TXD_PIN : bsp-evk1105.c
• BSP_USART_ByteRd() : bsp-evk1105.c , bsp.h
• BSP_USART_ByteWr() : bsp.h , bsp-evk1105.c
• BSP_USART_Init() : bsp-evk1105.c , bsp.h
• BSP_USART_IntDis() : bsp.h , bsp-evk1105.c
• BSP_USART_IntEn() : bsp.h , bsp-evk1105.c
• BSP_USART_PrintDec() : bsp-evk1105.c , bsp.h
• BSP_USART_printf() : bsp.h , bsp-evk1105.c
• BSP_USART_PrintHex() : bsp.h , bsp-evk1105.c
• BSP_USART_StrWr() : bsp-evk1105.c , bsp.h
• BSTATUS_BUSY : btypes.h
• BSTATUS_ERROR : btypes.h
• BSTATUS_ERROR_MEMORY : btypes.h
• BSTATUS_ERROR_OS : btypes.h
• BSTATUS_ERROR_PARAM : btypes.h
• BSTATUS_ERROR_SOLID_MEMORY : btypes.h
• BSTATUS_INFO_CONTINUE : btypes.h
• BSTATUS_INFO_CREATED : btypes.h
• BSTATUS_INFO_OVERFLOW : btypes.h
• BSTATUS_INFO_SETUP : btypes.h
• BSTATUS_LOCKED : btypes.h
• BSTATUS_NOT_AVAILABLE : btypes.h
• BSTATUS_NOT_CONNECTED : btypes.h
• BSTATUS_NOT_SUPPORTED : btypes.h
• BSTATUS_OK : btypes.h
• BSTATUS_REMOTE_ERROR : btypes.h
• BSTATUS_TIMEOUT : btypes.h
• BTLC1000 : parts.h
• BTYPES_GET_LSB_UINT16 : btypes.h
• BTYPES_GET_LSB_UINT32 : btypes.h
• BTYPES_GET_MSB_UINT16 : btypes.h
• BTYPES_GET_MSB_UINT32 : btypes.h
• BTYPES_SET_LSB_UINT16 : btypes.h
• BTYPES_SET_MSB_UINT16 : btypes.h
• buf : jdmainct.c , thirdparty/polarssl/examples/bench_example/benchmark.c , host_template_task.c
• buf_cia : common/components/memory/sd_mmc/unit_tests/unit_tests.c , example.c
• buf_cmd : host_mem.c
• buf_save : common/components/memory/sd_mmc/unit_tests/unit_tests.c
• buf_test : common/components/memory/sd_mmc/unit_tests/unit_tests.c , example.c
• buf_trace : usb_stream_player_with_cs2200.c , usb_stream_player.c
• BUFF_INIT : conf_buff_player.h
• BUFF_PLAYER_ADDRESS_START : conf_buff_player.h
• buff_player_close() : buff_player.h , buff_player.c
• buff_player_create() : buff_player.c , buff_player.h
• buff_player_dacs_end_of_pcm_buf() : buff_player.h , buff_player.c
• buff_player_dacs_flush() : buff_player.h , buff_player.c
• buff_player_dacs_output() : buff_player.c , buff_player.h
• buff_player_dacs_setup() : buff_player.c , buff_player.h
• buff_player_get_first_pcm_buf() : buff_player.c
• buff_player_get_first_pcm_buf_idx() : buff_player.c
• buff_player_get_last_pcm_buf() : buff_player.c
• buff_player_get_last_pcm_buf_idx() : buff_player.c
• buff_player_get_pcm_buf_fifo_size() : buff_player.c
• buff_player_get_reload_pcm_buf() : buff_player.c
• buff_player_get_reload_pcm_buf_idx() : buff_player.c
• buff_player_get_wr_pcm_buf() : buff_player.c
• buff_player_get_wr_pcm_buf_idx() : buff_player.c
• buff_player_is_pcm_buf_fifo_empty() : buff_player.c
• buff_player_is_pcm_buf_fifo_full() : buff_player.c
• buff_player_is_pcm_buf_fifo_reloadable() : buff_player.c
• buff_player_malloc() : buff_player.h , buff_player.c
• BUFF_PLAYER_MAX_BUF_CNT : buff_player.c , conf_buff_player.h
• BUFF_PLAYER_MEMORY_SIZE : conf_buff_player.h
• buff_player_mute_audio() : buff_player.c , buff_player.h
• buff_player_pcm_buf_fifo : buff_player.c
• buff_player_peek_reload_pcm_buf() : buff_player.c
• buff_player_put_pcm_buf() : buff_player.c
• buff_player_remove_used_pcm_buf() : buff_player.c
• buffer : examples/adpcm_encoder/adpcm_example.c , examples/adpcm_streaming/adpcm_example.c , gui.c
• BUFFER_LENGTH : applications/uc3-dsplib-demo/conf/conf_tpa6130.h
• BUFFER_LENGTH_LOG : applications/uc3-dsplib-demo/conf/conf_tpa6130.h
• BUFFER_SIZE : examples/adpcm_encoder/adpcm_example.c , examples/adpcm_streaming/adpcm_example.c
• buffer_state : examples/adpcm_encoder/adpcm_example.c
• BUFFER_STATE_BUSY : examples/adpcm_encoder/adpcm_example.c
• BUFFER_STATE_FILLED : examples/adpcm_encoder/adpcm_example.c
• BUFFER_STATE_FREE : examples/adpcm_encoder/adpcm_example.c
• BUFFER_WAIT_DELAY : macb.c
• buffers : audio_mixer.c
• BUFFERSIZE : sd_mmc_spi_example.c
• BUFSIZE : thirdparty/polarssl/examples/bench_example/benchmark.c
• build_ycc_rgb_table() : jdmerge.c , jdcolor.c
• BULK_PROTOCOL : usb_ids.h
• BURST_FUNC_NAME() : touch_api.h
• burst_increment : bma220.c
• BURST_JOIN : touch_api.h
• burst_proc : touch_api.h
• bus_get() : sensor_bus.h
• bus_init() : sensor_bus.h
• BUS_POWERED : usb_task.h
• bus_probe() : sensor_bus.h
• bus_put() : sensor_bus.h
• bus_read() : sensor_bus.h
• bus_reg_bitclear() : sensor_bus.h
• bus_reg_bitset() : sensor_bus.h
• bus_reg_fieldget() : sensor_bus.h , sensor_bus.c
• bus_reg_fieldset() : sensor_bus.h , sensor_bus.c
• bus_status_t : sensor_bus.h
• BUS_TYPE_PMBUS : sensor_bus.h
• BUS_TYPE_SMBUS : sensor_bus.h
• BUS_TYPE_SPI : sensor_bus.h
• bus_type_t : sensor_bus.h
• BUS_TYPE_TWI : sensor_bus.h
• BUS_TYPE_UNKNOWN : sensor_bus.h
• bus_write() : sensor_bus.h
• BUSIO_IF : sensor_platform.c
• BUSIO_OFFSET : sensor_platform.c
• BUSIO_SPEED : sensor_platform.c
• BUSIO_TYPE : sensor_platform.c
• busy : host_template_task.c
• BUTTON_0_EVENT_PUSH : device_mouse_hid_task.c
• BUTTON_1_EVENT_PUSH : device_mouse_hid_task.c
• BUTTON_2_EVENT_PUSH : device_mouse_hid_task.c
• BW : bma180.h
• BW_10HZ : bma180.h
• BW_1200HZ : bma180.h
• BW_150HZ : bma180.h
• BW_20HZ : bma180.h
• BW_300HZ : bma180.h
• BW_40HZ : bma180.h
• BW_600HZ : bma180.h
• BW_75HZ : bma180.h
• BW_BAND_PASS : bma180.h
• BW_HIGH_PASS : bma180.h
• Byte : compiler.h
• BYTE : examples/adpcm_wav_player/adpcm_example.c
• byte_adr_of_block : avr32/components/memory/sd_mmc/sd_mmc_spi/sd_mmc_spi.h
• BYTE_ORDER : lwip-port-1.4.1/hd/if/include/arch/cc.h , lwip-port-1.4.0/at32uc3/include/arch/cc.h , lwip-port-1.3.2/at32uc3/include/arch/cc.h , lwip-port-1.3.2/hd/if/include/arch/cc.h , lwip-port-1.4.1/at32uc3/include/arch/cc.h , lwip-port-1.4.0/hd/if/include/arch/cc.h
• BYTE_PATTERN1 : avr32/components/memory/sd_mmc/sd_mmc_spi/unit_tests/unit_tests.c , common/components/memory/data_flash/at45dbx/unit_tests/unit_tests.c
• BYTE_PATTERN2 : common/components/memory/data_flash/at45dbx/unit_tests/unit_tests.c , avr32/components/memory/sd_mmc/sd_mmc_spi/unit_tests/unit_tests.c
• BYTE_PATTERN3 : common/components/memory/data_flash/at45dbx/unit_tests/unit_tests.c
• bytes_left : jmemmgr.c
• bytes_read : jdmarker.c
• bytes_used : jmemmgr.c
• bytesperrow : jmemmgr.c
• bytestozero : jpegint.h