__tstrCryptoMemHdr | |
_all_desc_discovery_resp | |
_appCbParams | |
_ble_common_event_cb_t | |
_ble_gap_event_cb_t | |
_ble_gatt_client_event_cb_t | |
_ble_gatt_server_event_cb_t | |
_ble_gatt_transparent_event_cb_t | |
_ble_pairing_event_cb_t | |
_bm_application_cmd | |
_bm_application_cmdpkt | |
_bm_application_event | |
_bm_program_cmd | |
_bm_program_cmdpkt | |
_bm_program_event | |
_ChannelAttr | |
_ChannelParameters | |
_channelParams | |
_ClassCParams_t | |
_CmnParams | |
_DataRange | |
_DevTime | Device time value in relation to GPS Epoch |
_dma_module | |
_DRParams | Regional parameters which are controlled by Data Rate |
_DutyCycleTimer | |
_ecrConfig | Error Coding Configuration This structure is used to override the error coding rate in RADIO layer when transmitting the packet |
_eeprom_master_page | Structure describing the EEPROM Emulation master page |
_eeprom_module | Internal device instance struct |
_eeprom_page | Structure describing emulated pages of EEPROM data |
_event_fifo_t | |
_events_module | |
_FileMap | |
_FotaImageHeader | |
_FportCallbacks_t | |
_GPSEpochTime | |
_ItemHeader | |
_ItemMap | |
_JoinAccept | |
_JoinBackoffTimer | |
_JoinDutyCycleTimer | |
_JoinReqinfo_t | |
_LBTTimer | |
_Lora | |
_LorawanLBT | |
_LorawanLBTParams | |
_LorawanMcastActivationParams_t | |
_LorawanMcastAppSkey | |
_LorawanMcastDatarate | |
_LorawanMcastDevAddr | |
_LorawanMcastDlFreqeuncy | |
_LorawanMcastFcnt | |
_LorawanMcastKeys | |
_LorawanMcastNwkSkey | |
_LorawanMcastParams_t | |
_LorawanMcastPeriodicity | |
_LorawanMcastStatus | |
_LorawanSendReq | |
_LorawanStatus | |
_MessageRx_t | |
_MessageState_t | |
_MessageTx_t | |
_nvm_module | |
_OthChannelParams | |
_PdsFileMarks | |
_PdsNvm_t | |
_NVM_Mem | |
_NVM_Struct | |
_PdsNvmHeader_t | |
_PdsWl_t | |
_WL_Mem | |
_WL_Struct | |
_PdsWlHeader_t | |
_PMM_SleepReq_t | |
_primary_service_char_discovery_resp | |
_RadioCallbackMask_t | Possible callback events registration |
_BitMask_ | |
_RadioCallbackParam_t | A structure for storing the callback parameters |
_radioConfig | |
_RadioConfiguration_t | A structure for storing all the attributes of the radio and the transceiver |
_RadioEvents_t | Possible events from DIO's and timers |
_RadioLBT_t | A structure for storing all Listen Before Talk parameters |
_RadioLBTParams_t | A structure for storing the Listen Before Talk parameters for get and set |
_RadioModeModulation_t | A structure for storing the modes and modulations supported as parameters for get and set |
_RadioReceiveParam_t | A structure for storing the receive parameters |
_RadioTransmitParam_t | A structure for storing the transmit parameters |
_ReceiveWindow2Params | |
_RegParams | |
_RegParamsType1 | |
_RegParamsType2 | |
_RegPdsItems | |
_RowMap | |
_rww_eeprom_master_page | Structure describing the EEPROM Emulation master page |
_rww_eeprom_module | Internal device instance struct |
_rww_eeprom_page | Structure describing emulated pages of RWW EEPROM data |
_StackVersion_t | |
_SubBandParams | |
_SwTimer | |
_system_clock_dfll_config | DFLL-specific data container |
_system_clock_dpll_config | DPLL-specific data container |
_system_clock_module | System clock module data container |
_system_clock_xosc_config | XOSC-specific data container |
_TimeOnAirParams | |
_TxParams | |
_UpdateFileMap | |
A_BLOCK_LINK | |
ac_chan_config | Analog Comparator Comparator channel configuration structure |
ac_config | Analog Comparator module configuration structure |
ac_events | AC event enable/disable structure |
ac_module | AC software device instance structure |
ac_win_config | Analog Comparator Window configuration structure |
acc_sensor_value_t_ | |
ActivationParameters_t | |
adc_config | ADC configuration structure |
adc_correction_config | Gain and offset correction configuration structure |
adc_events | ADC event enable/disable structure |
adc_module | ADC software device instance structure |
adc_window_config | Window monitor configuration structure |
address_field_t | MAC Address type |
adv_element | |
adv_element_container | |
adv_element_t | Advertisement data element |
aes_config | AES Configuration structure |
ancs_prf | |
app_anp_data | |
app_ble_remote_device_info_t | |
app_csc_data | |
app_info_t | |
app_payload_t | Application payload frame structure |
app_table_tag | |
AppCmdHeader_t | |
AppCmdIdentify_t | |
AppCmdPendingTableEntry_t | |
AppCmdUartHeader_t | |
AppCmdUartIdentify_t | |
AppData_t | |
AppMessage_t | |
at_ble_addr_t | Blue-tooth Low Energy address Type |
at_ble_adv_cmp_evt_t | Advertising complete event |
at_ble_adv_data_update_on_the_fly_t | Use this structure when calling the api at_ble_adv_data_update_on_the_fly to set the advertising data on the fly |
at_ble_adv_report_t | Advertising report status |
at_ble_att_cfg_t | |
at_ble_att_info_req_t | |
at_ble_bus_info_t | |
at_ble_channel_map_t | Channel Map Structure |
at_ble_char_list | Encapsulation for a characteristic and its length |
at_ble_char_presentation_t | Characteristic presentation format |
at_ble_char_val_t | |
at_ble_characteristic_changed_t | |
at_ble_characteristic_configuration_changed_t | |
at_ble_characteristic_found_t | |
at_ble_characteristic_read_req_t | |
at_ble_characteristic_read_response_t | |
at_ble_characteristic_t | Characteristic structure |
at_ble_characteristic_write_request_t | Structure received when write to a characteristic is required |
at_ble_characteristic_write_response_t | |
at_ble_chr_t | |
at_ble_cmd_complete_event_t | |
at_ble_conn_param_update_done_t | |
at_ble_conn_param_update_request_t | |
at_ble_connected_t | AT_BLE_CONNECTED message format |
at_ble_connection_params_t | Connection parameters |
at_ble_CSRK_t | Connection Signature Resolution Key |
at_ble_descriptor_found_t | |
at_ble_dev_config_t | Device configuration |
at_ble_dev_info | Peer device request to modify local device info such as name or appearance |
dev_info | Device information data |
device_name | Device name |
at_ble_disconnected_t | Handle and Status of disconnected peer |
at_ble_dtm_t | Data type of DMT status and report, "number_of_packets" will be used only in case of receiving the event AT_BLE_LE_PACKET_REPORT after calling the API |
at_ble_encryption_request_t | |
at_ble_encryption_status_changed_t | |
at_ble_gap_dev_name_t | Device name |
at_ble_gap_deviceinfo_t | Device info DB at_ble_set_gap_deviceinfo |
at_ble_gap_irk_t | Identity Resolving Key |
at_ble_gap_whitelist_t | White-list structure |
at_ble_gapc_cmp_evt_t | |
at_ble_gapc_dev_info_val_t | Retrieve information Structure |
at_ble_gapc_get_info_cmd_t | Retrieve information command Structure |
at_ble_generic_att_desc_t | |
at_ble_htpt_cfg_indntf_ind_t | Parameters of the AT_BLE_HTPT_CFG_INDNTF_IND message |
at_ble_htpt_create_db_cfm_t | Parameters of the AT_BLE_HTPT_CREATE_DB_CFM message |
at_ble_htpt_db_cfg | Parameters of the Health thermometer service database |
at_ble_htpt_disable_ind_t | Parameters of the AT_BLE_HTPT_DISABLE_IND message |
at_ble_htpt_enable_rsp_t | Parameters of the AT_BLE_HTPT_ENABLE_RSP message |
at_ble_htpt_meas_intv_chg_ind_t | Parameters of the AT_BLE_HTPT_MEAS_INTV_CHG_IND message |
at_ble_htpt_meas_intv_chg_req_t | Parameters of the AT_BLE_HTPT_MEAS_INTV_CHG_REQ message |
at_ble_htpt_meas_intv_upd_rsp_t | Parameters of the AT_BLE_HTPT_MEAS_INTV_UPD_RSP message |
at_ble_htpt_temp_send_cfm_t | Parameters of the AT_BLE_HTPT_TEMP_SEND_CFM message |
at_ble_inc_srv_t | |
at_ble_included_service_found_t | |
at_ble_included_service_t | Service Definition |
at_ble_indication_confirmed_t | |
at_ble_indication_recieved_t | |
at_ble_init_config_t | |
at_ble_IRK_t | IRKey |
at_ble_lecb_add_credit_ind_t | Parameters of the AT_BLE_LECB_ADD_CREDIT_IND message |
at_ble_lecb_conn_req_t | Parameters of the AT_BLE_LECB_CONN_REQ message |
at_ble_lecb_connected_t | Parameters of the AT_BLE_LECB_CONNECTED message |
at_ble_lecb_data_recv_t | Parameters of the AT_BLE_LECB_DATA_RECIEVED message |
at_ble_lecb_disconnected_t | Parameters of the AT_BLE_LECB_DISCONNECTED message |
at_ble_lecb_send_rsp_t | Parameters of the AT_BLE_LECB_SEND_RESP message |
at_ble_LTK_t | Long Term Key |
at_ble_mempool_t | |
at_ble_mtu_changed_ind_t | MTU changed value |
at_ble_notification_recieved_t | |
at_ble_pair_done_t | Pairing done message |
at_ble_pair_features_t | Pairing Features |
at_ble_pair_key_request_t | |
at_ble_pair_request_t | |
at_ble_peer_att_info_ind_t | Peer attribute info structure GAPC_GET_DEV_INFO_REQ_IND |
at_ble_prf_date_time_t | Time profile information |
at_ble_prf_server_error_ind_t | Message structure used to inform APP that an error has occurred in the profile server role task |
at_ble_primary_service_found_t | |
at_ble_read_authorize_request_t | |
at_ble_resolv_rand_addr_status_t | |
at_ble_rx_power_value_t | |
at_ble_scan_info_t | Scan Information |
at_ble_scan_report_t | Scan report status |
at_ble_server_config_desc_t | |
at_ble_service_t | |
at_ble_sign_counter_t | Signature counter |
at_ble_signature_info_t | Connection Signature information |
at_ble_slave_sec_request_t | |
at_ble_spcp_t | Slave preferred connection parameters |
at_ble_user_desc_t | |
at_ble_uuid_t | UUID type |
atca_check_mac_in_out | Input/output parameters for function atcah_check_mac() |
atca_decrypt_in_out | Input/output parameters for function atca_decrypt() |
atca_derive_key_in_out | Input/output parameters for function atcah_derive_key() |
atca_derive_key_mac_in_out | Input/output parameters for function atcah_derive_key_mac() |
atca_gen_dig_in_out | Input/output parameters for function atcah_gen_dig() |
atca_gen_key_in_out | Input/output parameters for calculating the PubKey digest put into TempKey by the GenKey command with the atcah_gen_key_msg() function |
atca_hmac_in_out | Input/output parameters for function atca_hmac() |
atca_include_data_in_out | Input / output parameters for function atca_include_data() |
atca_io_decrypt_in_out | |
atca_mac_in_out | Input/output parameters for function atca_mac() |
atca_nonce_in_out | Input/output parameters for function atca_nonce() |
atca_secureboot_enc_in_out | |
atca_secureboot_mac_in_out | |
atca_sign_internal_in_out | Input/output parameters for calculating the message and digest used by the Sign(internal) command |
atca_temp_key | Structure to hold TempKey fields |
atca_verify_in_out | Input/output parameters for function atcah_verify() |
atca_verify_mac | |
atca_write_mac_in_out | Input/output parameters for function atcah_write_auth_mac() and atcah_privwrite_auth_mac() |
atcac_sha1_ctx | |
atcac_sha2_256_ctx | |
BandDrReq_t | |
bas_app_state | |
bat_gatt_service_handler | |
beacon_id_t | Eddystone-UID beacon structure |
ble_characteristic_descriptors_discover_event_t | BLEDK3 Discover all characteristic descriptors event parameters |
ble_client_char_config_desc_t | The client characteristic configuration descriptor attribute definition, used at ble_char_t |
ble_common_event_cb_t | All BLE Common callback types |
ble_config_mode_status_event_t | BLEDK3 BLE Config mode status event parameters |
ble_connected_dev_info | |
ble_connected_dev_info_t | BLE manager maintains the device connection information, device role, bonding information, device connection state and Long Term Key |
ble_custom_event_cb | |
ble_custom_event_cb_t | All BLE Custom event callback types |
ble_descriptor_attribute_data | BLEDK3 Descriptor attribute data parameters used at ble_characteristic_descriptors_discover_event_t |
ble_dtm_event_cb | |
ble_dtm_event_cb_t | All BLE DTM event callback types |
ble_end_test_result_event_t | BLEDK3 BLE end test result event parameters |
ble_gap_event_cb | |
ble_gap_event_cb_t | BLE GAP Event callback types |
ble_gatt_client_event_cb | |
ble_gatt_client_event_cb_t | All BLE GATT Client callback types |
ble_gatt_server_event_cb | |
ble_gatt_server_event_cb_t | All BLE GATT Server callback types |
ble_gatt_transparent_event_cb_t | All BLE GATT Transparent callback types |
ble_htpt_event_cb | |
ble_htpt_event_cb_t | All BLE HTPT event callback types |
ble_l2cap_event_cb | |
ble_l2cap_event_cb_t | All BLE L2CAP callback types |
ble_mgr_adv_report_event_t | Advertisement report event data |
ble_mgr_adv_report_match_param_t | |
ble_pairing_event_cb_t | All BLE Pairing callback types |
ble_platform_api_list_t | Platform APIs registration list used at platform_init_t |
ble_primary_service_characteristics_discover_event_t | BLEDK3 Discover primary service/characteristic event parameters |
ble_primary_service_discover_all_event_t | BLEDK3 Discover all primary service event parameters |
ble_status_report_event_t | BLEDK3 Status report event parameters |
ble_uuid_t | UUID |
ble_uuid_val_t | UUID value |
block_header | Block header, located before each block of item data |
BM_APPLICATION_CMDPKT | |
bm_cmd_frame_t | |
BM_PROGRAM_CMD | |
BM_PROGRAM_CMDPKT | |
bno055_accel_double_t | Struct for Accel-output data of precision double |
bno055_accel_float_t | Struct for Accel-output data of precision float |
bno055_accel_offset_t | Struct for Accel offset |
bno055_accel_t | Struct for accel data read from registers |
bno055_euler_double_t | Struct for Euler-output data of precision double |
bno055_euler_float_t | Struct for Euler-output data of precision float |
bno055_euler_t | Struct for Euler data read from registers |
bno055_gravity_double_t | Struct for Gravity-output data of precision double |
bno055_gravity_float_t | Struct for Gravity-output data of precision float |
bno055_gravity_t | Struct for Gravity data read from registers |
bno055_gyro_double_t | Struct for Gyro-output data of precision double |
bno055_gyro_float_t | Struct for Gyro-output data of precision float |
bno055_gyro_offset_t | Struct for Gyro offset |
bno055_gyro_t | Struct for Gyro data read from registers |
bno055_linear_accel_double_t | Struct for Linear Accel-output data of precision double |
bno055_linear_accel_float_t | Struct for Linear accel-output data of precision float |
bno055_linear_accel_t | Struct for Linear Accel data read from registers |
bno055_mag_double_t | Struct for Mag-output data of precision double |
bno055_mag_float_t | Struct for Mag-output data of precision float |
bno055_mag_offset_t | Struct for Mag offset |
bno055_mag_t | Struct for Mag data read from registers |
bno055_quaternion_t | Struct for Quaternion data read from registers |
bno055_sic_matrix_t | Struct for soft iron calibration matrix |
bno055_t | Bno055 struct |
bod12_config | Configuration structure for a BOD12 module |
bod33_config | Configuration structure for a BOD33 module |
boot_info_t | |
BootBuffer_t | |
BootInfo_t | |
button_state_t | Button state information |
ccl_config | CCL module configuration structure |
ccl_lut_config | CCL LUT 0 to 3 configuration structure |
certEntry | |
certFileInfo | |
char_desc_discovery_resp_t | Discover descriptor response event parameters |
char_info | |
CL_HashContext | |
corCoRoutineControlBlock | |
crc_set_req_t | CRC set request frame structure to change the peer node's CRC settings |
crc_set_rsp_t | CRC set response frame structure to send the status of crc_set_req |
crc_stat_req_t | CRC status request frame structure to request the peer node's CRC settings |
crc_stat_rsp_t | CRC status response frame structure to send the peer node's CRC settings |
csc_report_ntf | SPOG report notification or indication, notify to user |
csc_serv | Custom serial chat service info |
dac_chan_config | DAC channel configuration structure |
dac_config | DAC configuration structure |
dac_events | DAC event enable/disable structure |
dac_module | DAC software device instance structure |
data_pkt_range_test_t | Data packet frame structure to send data in Range Measurement mode |
desc_info | |
device_info_char_value_t | Characteristic value information |
DeviceAddress_t | |
DIR | |
dis_gatt_service_handler | |
dis_info_data | Configurable Client characteristic data for a given dis info type |
div_set_req_t | Antenna Diversity set request frame structure to change the peer node's antenna diversity settings |
div_set_rsp_t | Antenna Diversity set response frame structure to send the status of div_set_req |
div_stat_req_t | Antenna Diversity status request frame structure to request the peer node's antenna diversity settings |
div_stat_rsp_t | Antenna Diversity status response frame structure to send the peer node's antenna diversity settings |
DlSettings_t | |
dma_crc_config | Configurations for CRC calculation |
dma_descriptor_config | DMA transfer descriptor configuration |
dma_events_config | Configurations for DMA events |
dma_resource | Structure for DMA transfer resource |
dma_resource_config | DMA configurations for transfer |
EcDomainParam | |
EcPoint | |
ed_scan_result_t | ED scan result structure to hold the channel and its ED value |
eddystone_tlm_data_t | Eddystone-TLM frame data |
eeprom_emulator_parameters | EEPROM memory parameter structure |
esuid_data_t | Eddystone-UID beacon data |
esurl_conf_gatt_service_t | URL configuration service GATT characteristics |
esurl_data_t | Eddystone-URL beacon data |
event_mem_t | Event memory init used at platform_init_t |
event_msg_t | |
event_t | |
events_config | Events configuration struct |
events_hook | Event hook |
events_resource | Event channel resource |
ExistingImageInfo_t | |
extint_chan_conf | External Interrupt Controller channel configuration structure |
extint_events | External Interrupt event enable/disable structure |
extint_nmi_conf | External Interrupt Controller NMI configuration structure |
FATFS | |
FCnt_t | |
FCtrl_t | |
featureBits_t | |
featureMask_t | |
fifo_handle_tag | |
FIL | |
FileBlockDescriptor | |
FILINFO | |
FlashWord_t | |
fmp_app_state | |
font | Storage structure for font meta data |
FragSessionSetupReq_s | |
frame_info_tag | Globally used frame information structure |
frame_payload_t | General Command frame payload type |
fsk_tag | |
gatt_anp_handler | |
gatt_cts_handler | |
gatt_dst_handler | |
gatt_ias_char_handler | |
gatt_lls_char_handler | |
gatt_rtu_handler | |
gatt_service_handler | |
gatt_service_handler_t | GATT services handles |
gatt_txps_char_handler | |
general_pkt_t | Union of all request and and response structures |
GenericEui_t | |
gfx_mono_bitmap | Storage structure for bitmap pixel data and metadata |
gfx_mono_menu | Menu struct |
gfx_mono_spinctrl | Spin control struct |
gfx_mono_spinctrl_spincollection | Collection of spinners struct |
gfx_mono_spinctrl_string | String struct |
gts_char_tag | |
Hdr_t | |
HeapRegion | |
hid_boot_ntf | HID boot notification or indication, notify to user |
hid_control_mode_ntf | HID control point info, notify to user when control point change by user |
hid_gatt_serv_handler | |
hid_info | HID info of device |
hid_prf_info_t | HID profile application info |
hid_proto_mode_ntf | HID protocol mode info, notify to user when protocol mode change by user |
hid_report_map | HID Report Map Information |
hid_report_ntf | HID report notification or indication, notify to user |
hid_report_ref | HID Report Reference Descriptor |
hid_reportref_desc | HID report reference descriptor instance for device role |
hid_serv | HID service instance for device role |
hr_gatt_service_handler | Hr_gatt_service_handler is the service handler function |
htp_app | |
http_client_config | HTTP client configuration structure |
http_client_data | Structure of the HTTP client callback |
http_client_data_disconnected | Structure of the HTTP_CLIENT_CALLBACK_DISCONNECTED callback |
http_client_data_recv_chunked_data | Structure of the HTTP_CLIENT_CALLBACK_RECV_CHUNKED_DATA callback |
http_client_data_recv_response | Structure of the HTTP_CLIENT_CALLBACK_RECV_RESPONSE callback |
http_client_data_requested | Structure of the HTTP_CLIENT_CALLBACK_REQUESTED callback |
http_client_data_sock_connected | Structure of the HTTP_CLIENT_CALLBACK_SOCK_CONNECTED callback |
http_client_module | Structure of HTTP client connection instance |
http_client_req | HTTP client request instance |
http_client_resp | HTTP client response instance |
http_entity | A structure that the implementation of HTTP entity |
HW_EepromParams_t | Eeprom access control structure |
hw_timer_struct | |
i2c_master_config | Configuration structure for the I2C Master device |
i2c_master_module | SERCOM I2C Master driver software device instance structure |
i2c_master_packet | I2C master packet for read/write |
i2c_slave_config | Configuration structure for the I2C slave device |
i2c_slave_module | SERCOM I2C slave driver software device instance structure |
i2c_slave_packet | I2C slave packet for read/write |
in_addr | IPv4 address representation |
iso7816_config_t | ISO7816 configuration struct |
json_obj | JSON data structure |
ksz8851snl_device | Ksz8851snl driver structure |
leg_oqpsk_tag | |
LinkAdrResp_t | |
LorawanCommands_t | |
LorawanMacKeys_t | |
LorawanMacStatus_t | |
mac_assoc_req_tag | Association Request type |
mac_assoc_response_tag | Association Response type |
mac_beacon_payload_tag | Beacon Payload type |
mac_coord_realign_tag | Coordinator Realignment type |
mac_data_payload_tag | Data Payload type |
mac_dev_gts_mgmt_tag | Device GTS table structure |
mac_disassoc_req_tag | Disassociation Request type |
mac_gts_desc_tag | |
mac_gts_list_tag | |
mac_gts_spec_tag | |
mac_pan_gts_mgmt_tag | PANC GTS table structure |
mac_pib_tag | |
McClassSessionParams_s | |
McGroupSetupParams_s | |
mcps_data_conf_tag | This is the MCPS-DATA.confirm message structure |
mcps_data_ind_tag | This is the MCPS-DATA.indication message structure |
mcps_data_req_tag | This is the MCPS-DATA.request message structure |
mcps_purge_conf_tag | This is the MCPS-PURGE.confirm message structure |
mcps_purge_req_tag | This is the MCPS-PURGE.request message structure |
mem | The heap is made up as a list of structs of this type |
memp | |
MessageData | |
Mhdr_t | |
MinMaxDr_t | |
mlme_associate_conf_tag | This is the MLME-ASSOCIATE.confirm message structure |
mlme_associate_ind_tag | This is the MLME-ASSOCIATE.indication message structure |
mlme_associate_req_tag | This is the MLME-ASSOCIATE.request message structure |
mlme_associate_resp_tag | This is the MLME-ASSOCIATE.response message structure |
mlme_beacon_notify_ind_tag | This is the MLME-BEACON-NOTIFY.indication message structure |
mlme_comm_status_ind_tag | This is the MLME-COMM-STATUS.indication message structure |
mlme_disassociate_conf_tag | This is the MLME-DISASSOCIATE.confirm message structure |
mlme_disassociate_ind_tag | This is the MLME-DISASSOCIATE.indication message structure |
mlme_disassociate_req_tag | This is the MLME-DISASSOCIATE.request message structure |
mlme_get_conf_tag | This is the MLME-GET.confirm message structure |
mlme_get_req_tag | This is the MLME-GET.request message structure |
mlme_gts_conf_tag | This is the MLME-GTS.confirm message structure |
mlme_gts_ind_tag | This is the MLME-GTS.indication message structure |
mlme_gts_req_tag | This is the MLME-GTS.request message structure |
mlme_orphan_ind_tag | This is the MLME-ORPHAN.indication message structure |
mlme_orphan_resp_tag | This is the MLME-ORPHAN.response message structure |
mlme_poll_conf_tag | This is the MLME-POLL.confirm message structure |
mlme_poll_req_tag | This is the MLME-POLL.request message structure |
mlme_reset_conf_tag | This is the MLME-RESET.confirm message structure |
mlme_reset_req_tag | This is the MLME-RESET.request message structure |
mlme_rx_enable_conf_tag | This is the MLME-RX-ENABLE.confirm message structure |
mlme_rx_enable_req_tag | This is the MLME-RX-ENABLE.request message structure |
mlme_scan_conf_tag | This is the MLME-SCAN.confirm message structure |
mlme_scan_req_tag | This is the MLME-SCAN.request message structure |
mlme_set_conf_tag | This is the MLME-SET.confirm message structure |
mlme_set_req_tag | This is the MLME-SET.request message structure |
mlme_start_conf_tag | This is the MLME-START.confirm message structure |
mlme_start_req_tag | This is the MLME-START.request message structure |
mlme_sync_loss_ind_tag | This is the MLME-SYNC-LOSS.indication message structure |
mlme_sync_req_tag | This is the MLME-SYNC.request message structure |
mqtt_client_pool | |
mqtt_config | MQTT configuration structure |
mqtt_data | Structure of the MQTT callback |
mqtt_data_connected | Structure of the MQTT_CALLBACK_CONNECTED callback |
mqtt_data_disconnected | Structure of the MQTT_CALLBACK_DISCONNECTED callback |
mqtt_data_ping | Structure of the MQTT_CALLBACK_SENT_PING callback |
mqtt_data_published | Structure of the MQTT_CALLBACK_PUBLISHED callback |
mqtt_data_sock_connected | Structure of the MQTT_CALLBACK_SOCK_CONNECTED callback |
mqtt_data_subscribed | Structure of the MQTT_CALLBACK_SUBSCRIBED callback |
mqtt_data_unsubscribed | Structure of the MQTT_CALLBACK_UNSUBSCRIBED callback |
mqtt_module | Structure of MQTT connection instance |
MQTTClient | |
MessageHandlers | |
MQTTConnackFlags | |
MQTTConnectFlags | |
MQTTHeader | Bitfields for the MQTT header byte |
MQTTLenString | |
MQTTMessage | |
MQTTPacket_connectData | |
MQTTPacket_willOptions | Defines the MQTT "Last Will and Testament" (LWT) settings for the connect packet |
MQTTString | |
MQTTTransport | |
mr_oqpsk_tag | |
netbuf | |
netif | Generic data structure used for all lwIP network interfaces |
Network_t | |
new_phy_tag | |
NewFreeChannelReq_t | |
NewTxChannelReq_t | |
node_ib_t | Structure to holds the information base for the node |
nvm_config | NVM controller configuration structure |
nvm_fusebits | NVM user row fuse setting structure |
nvm_parameters | NVM memory parameter structure |
NWK_DataInd_t | |
NWK_DataReq_t | |
NwkCommandAck_t | |
NwkCommandRouteError_t | |
NwkCommandRouteReply_t | |
NwkCommandRouteRequest_t | |
NwkDuplicateRejectionEntry_t | |
NwkFrame_t | |
NwkFrameHeader_t | |
NwkFrameMulticastHeader_t | |
NwkIb_t | |
ofdm_tag | |
oled1_instance | Driver instance struct |
opamp0_config | OPAMP 0 configuration structure |
opamp1_config | OPAMP 1 configuration structure |
opamp2_config | OPAMP 2 configuration structure |
opamp_config_common | OPAMP 0 to 2 common configuration structure |
oqpsk_tag | |
os_signal | |
PACKED | Blue-tooth Low Energy address Type |
param_value_t | Parameter value types |
parse_tag | |
pas_service_handler | |
pbuf | |
pds_bond_info_t | BLE manager stores the bonding information using PDS |
pds_env | containing environment parameters of the NVM module |
peer_conf_t | Peer confirm frame structure used in Peer Search process |
peer_info_rsp_t | Peer information response frame structure to send the peer details |
peer_req_t | Peer request frame structure used in Peer Search process |
peer_rsp_t | Peer response frame structure used in Peer Search process |
peer_search_receptor_arg_t | Structure to hold the peer device's short address and ieee address |
peer_state_function_t | Structure to hold the the function pointers to handle various Peer Search Process tasks |
PHY_DataInd_t | |
phy_mode_tag | PHY mode structure |
phy_tag | |
platform_api_list_tag | |
platform_init_t | Platform initialization, includes event memory init and platform APIs registration |
pnp_id_char_value_t | Pnp characteristic value information |
port_config | Port pin configuration structure |
port_input_event_config | Port input event configuration structure |
prf_date_time | Time profile information |
prf_server_error_ind | Message structure used to inform APP that an error has occurred in the profile server role task |
print_event_msg_t | Print event message stucture to organize the prints |
ProtocolParams_t | |
QueueDefinition | |
range_tx_t | |
rate_tag | |
ReceiveWindowParameters_t | |
Redundancy_t | |
remote_test_req_t | Remote Test Start Request Structure |
result_req_t | Result request frame structure to request the results of the PER test |
result_rsp_t | Result response frame structure to send the results of the PER test |
rtc_calendar_alarm_time | Alarm structure |
rtc_calendar_config | RTC configuration structure |
rtc_calendar_events | RTC Calendar event enable/disable structure |
rtc_calendar_time | Time structure |
rtc_count_config | RTC Count configuration structure |
rtc_count_events | RTC Count event enable/disable structure |
rtc_tamper_config | RTC Tamper configuration structure |
rtc_tamper_input_config | RTC tamper input configuration structure |
rww_eeprom_emulator_parameters | RWW EEPROM memory parameter structure |
Rx1WindowParams_t | |
Rx1WindowParamsReq_t | |
s_msg_wifi_product | Message format definitions |
s_msg_wifi_product_main | |
sbc_caching_mode_page | SBC-2 Caching mode page |
sbc_rdwr_error_recovery_mode_page | SBC-2 Read-Write Error Recovery mode page |
sbc_read_capacity10_data | SBC-2 READ CAPACITY (10) parameter data |
sbc_slba_block_desc | SBC-2 Short LBA mode parameter block descriptor |
scan_resp_element | |
scan_result_list_t | Union to force alignment of variable portion of scan confirm with wpan_pandescriptor_t |
scsi_inquiry_data | SCSI Standard Inquiry data structure |
scsi_mode_page_0_header | SCSI Page_0 Mode Page header (SPF not set) |
scsi_mode_param_header10 | SCSI Mode Parameter Header used by MODE SELECT(10) and MODE SENSE(10) |
scsi_mode_param_header6 | SCSI Mode Parameter Header used by MODE SELECT(6) and MODE SENSE(6) |
scsi_request_sense_data | SCSI Standard Request sense data structure |
sd_mmc_card | SD/MMC card information structure |
sec_ctrl_tag | Structure containing auxiliary security header information |
sector_header | Sector header, located at sector start |
ser_fifo_desc | FIFO descriptor used by FIFO driver |
SerialInterface_t | |
serv_info | |
set_param_cb_t | Structure used for updating the parameters after sending them to peer |
set_parm_req_t | Set paramter Request frame structure to set the the parameters like channel on peer node |
sFTMPackageParams | |
sha256ctxt | |
sockaddr | Generic socket address structure |
sockaddr_in | Socket address structure for IPV4 addresses. Used to specify socket address information to connect to. Can be cast to sockaddr structure |
spc_control_page_info_execpt | SPC-2 Informational exceptions control page See chapter 8.3.8 |
spi_config | SPI configuration structure |
spi_master_config | SPI Master configuration structure |
spi_master_vec_bufdesc | Buffer descriptor structure |
spi_master_vec_config | Driver configuration structure |
spi_master_vec_module | Driver instance |
spi_module | SERCOM SPI driver software device instance structure |
spi_slave_config | SPI slave configuration structure |
spi_slave_inst | SPI peripheral slave instance structure |
spi_slave_inst_config | SPI peripheral slave configuration structure |
sps_gatt_service_handler | |
state_function_t | This structure forms the jump table to address various main states in this application |
stream_writer | |
StructCPtr | Structure of pointers to constant 64-, 32-, 16- and 8-bit unsigned integers |
StructCVPtr | Structure of pointers to constant volatile 64-, 32-, 16- and 8-bit unsigned integers |
StructPtr | Structure of pointers to 64-, 32-, 16- and 8-bit unsigned integers |
StructVPtr | Structure of pointers to volatile 64-, 32-, 16- and 8-bit unsigned integers |
sun_phy_mode_tag | |
sun_phy_tag | |
sw_sha256_ctx | |
sw_timer_config | SW timer configuration structure |
sw_timer_handle | SW timer handler structure |
sw_timer_module | SW timer module structure |
sw_timer_t | |
sys_timeo | |
SYS_Timer_t | |
system_battery_backup_power_switch_config | Battery Backup Power Switch (BBPS) Control configuration |
system_clock_source_dfll_config | Configuration structure for DFLL |
system_clock_source_dpll_config | Configuration structure for DPLL |
system_clock_source_osc16m_config | Configuration structure for OSC16M |
system_clock_source_osc32k_config | Configuration structure for OSCULP32K |
system_clock_source_osculp32k_config | Configuration structure for OSCULP32K |
system_clock_source_xosc32k_config | Configuration structure for XOSC32K |
system_clock_source_xosc_config | Configuration structure for XOSC |
system_gclk_chan_config | Generic Clock configuration structure |
system_gclk_gen_config | Generic Clock Generator configuration structure |
system_id_char_value_t | System ID characteristic value information |
system_pinmux_config | Port pin configuration structure |
system_standby_config | Standby configuration |
system_voltage_references_config | Voltage References System (VREF) Control configuration |
system_voltage_regulator_config | Voltage Regulator System (VREG) Control configuration |
t_monitor_if | |
tal_pib_tag | |
tc_16bit_config | Configuration struct for TC module in 16-bit size counter mode |
tc_32bit_config | Configuration struct for TC module in 32-bit size counter mode |
tc_8bit_config | Configuration struct for TC module in 8-bit size counter mode |
tc_config | TC configuration structure |
tc_events | TC event enable/disable structure |
tc_module | TC software device instance structure |
tc_pwm_channel | Configuration struct for TC module in 32-bit size counter mode |
tcc_capture_config | Configuration struct for the TCC module capture |
tcc_config | TCC configuration structure |
tcc_counter_config | Configuration struct for the TCC module base counter |
tcc_events | TCC event enable/disable structure |
tcc_input_event_config | TCC input event enable/disable/configure structure |
tcc_match_wave_config | Configuration struct for the TCC module match/wave generation |
tcc_module | TCC software device instance structure |
tcc_non_recoverable_fault_config | Configuration struct for TCC module non-recoverable fault |
tcc_output_event_config | TCC output event enable/disable/configure structure |
tcc_pins_config | Configuration struct for the TCC module output pins |
tcc_recoverable_fault_config | Configuration struct for TCC module recoverable fault |
tcc_wave_extension_config | Configuration struct for the TCC module waveform extension |
tcpip_msg | |
tenuCertParsingState | X.509 Certificate Parsing State Machine |
test_case | A test case |
test_suite | A test suite |
time_val | Time data structure |
Timer | |
timer_info_tag | |
trng_config | TRNG module configuration structure |
trng_events | TRNG event enable/disable structure |
trng_module | TRNG software device instance structure |
trx_config_params_t | Structure to hold all configurable parameter values |
tskTaskControlBlock | |
tstr1xAuthCredentials | |
tstr1xAuthTLSCredentials | |
tstrAcceptReply | |
tstrAsn1Context | |
tstrAsn1Element | |
tstrASN1RSAPrivateKey | |
tstrASN1RsaPrivateKey | RSA Private Key Elements |
tstrAuth1xMschap2 | |
tstrAuth1xTls | |
tstrAuthPsk | |
tstrAuthWep | |
tstrBindCmd | |
tstrBindReply | |
tstrBuff | |
tstrBuffer | |
tstrCloseCmd | |
tstrConfAutoRate | Auto TX rate selection parameters passed to m2m_wifi_conf_auto_rate |
tstrConnectAlpnReply | Connect Reply, contains sock number, error value and index of negotiated application protocol |
tstrConnectCmd | |
tstrConnectReply | Connect Reply, contains sock number and error value |
tstrCyptoResp | Crypto response |
tstrDHPublicKey | Diffie-Hellman Public Key Definition |
tstrDnsReply | DNS Reply, contains hostName and HostIP |
tstrEccReqInfo | |
tstrEcdhReqInfo | |
tstrECDomainParam | ECC Curve Domain Parameters |
tstrECDSAPubKey | |
tstrEcdsaSignReqInfo | |
tstrEcdsaVerifyReqInfo | |
tstrECPoint | Elliptic Curve point representation |
tstrECPublicKey | |
tstrEllipticCurve | Definition of an elliptic curve |
tstrEthInitParam | Structure to hold Ethernet interface parameters. Structure is to be defined and have its attributes set, based on the application's functionality before a call is made to initialize the wi-fi operations by calling the m2m_wifi_init function. Part of the wi-fi configuration structure tstrWifiInitParam. Applications shouldn't need to define this structure, if the bypass mode is not defined |
tstrFileInfo | |
tstrFlashLUTEntry | |
tstrFlashLUTHeader | |
tstrGpRegs | |
tstrHash512Context | |
tstrHashContext | |
tstrHashInfo | |
tstrHifContext | |
tstrHifHdr | Structure to hold HIF header |
tstrListenCmd | |
tstrListenReply | |
tstrM2MAPConfig | AP Configuration |
tstrM2MAPConfigExt | AP Configuration Extension |
tstrM2MAPModeConfig | AP Configuration |
tstrM2mBatteryVoltage | Battery Voltage |
tstrM2mBinaryHeader | Structure holding compatibility version info for firmware binaries |
tstrM2mClientState | PS Client State |
tstrM2mConnCredCmn | Wi-Fi Connect Credentials Common section |
tstrM2mConnCredHdr | Wi-Fi Connect Credentials Header |
tstrM2MConnInfo | M2M Provisioning Information obtained from the HTTP Provisioning server |
tstrM2MDefaultConnResp | Response error of the m2m_default_connect |
tstrM2MDeviceNameConfig | Device name |
tstrM2mEnableLogs | Enable Firmware logs |
tstrM2MGenericResp | Generic success/error response |
tstrM2MIPConfig | IP configuration (static/DHCP). The same structure is used for DCHP callback as well as static IP configuration |
tstrM2mIpCtrlBuf | Structure holding the incoming buffer's data size information, indicating the data size of the buffer and the remaining buffer's data size. The data of the buffer which holds the packet sent to the host when in the bypass mode, is placed in the tstrEthInitParam::au8ethRcvBuf attribute. This following information is retrieved in the host when an event M2M_WIFI_RESP_ETHERNET_RX_PACKET is received in the Wi-Fi callback function tpfAppWifiCb |
tstrM2mIpRsvdPkt | Received Packet Size and Data Offset |
tstrM2mLsnInt | Listen interval |
tstrM2MMulticastMac | M2M add/remove multi-cast mac address |
tstrM2MProvisionInfo | M2M Provisioning Information obtained from the HTTP Provisioning server |
tstrM2MProvisionModeConfig | M2M Provisioning Mode Configuration |
tstrM2mPsType | Power Save Configuration |
tstrM2mPwrMode | Power Mode |
tstrM2mReqScanResult | Scan Result Request |
tstrM2mRev | Structure holding firmware version parameters and build date/time |
tstrM2MScan | Wi-Fi Scan Request |
tstrM2mScanDone | Wi-Fi Scan Result |
tstrM2MScanOption | This struct contains the configuration options for Wi-Fi scan |
tstrM2MScanRegion | Wi-Fi channel regulation region information |
tstrM2Mservercmd | PS Server CMD |
tstrM2mServerInit | PS Server initialization |
tstrM2mSetMacAddress | Sets the MAC address from application. The WINC load the mac address from the effuse by default to the WINC configuration memory, but that function is used to let the application overwrite the configuration memory with the mac address from the host |
tstrM2mSha256Ctxt | SHA256 context data |
tstrM2mSlpReqTime | Manual power save request sleep time |
tstrM2MSNTPConfig | SNTP Client Configuration |
tstrM2MStopScanOption | This struct holds additional configuration options for Wi-Fi scan |
tstrM2mTxPwrLevel | Tx power level |
tstrM2mWifi1xHdr | Wi-Fi Authentication 802.1x header for parameters. The parameters (Domain, UserName, PrivateKey/Password) are appended to this structure |
tstrM2mWifiApId | Specify an access point (by SSID) |
tstrM2mWifiAuthInfoHdr | Generic Wi-Fi authentication information to be sent in a separate HIF message of type M2M_WIFI_IND_CONN_PARAM (preceding M2M_WIFI_REQ_CONN) |
tstrM2mWifiConnHdr | Wi-Fi Connect Request (new format) for use with M2M_WIFI_REQ_CONN. This structure is sent across the HIF along with the relevant auth details. One of: tstrM2mWifiPsk tstrM2mWifiWep tstrM2mWifi1xHdr If further authentication details need to be sent (such as client certificate for 1x TLS), they are sent with header tstrM2mWifiAuthInfoHdr in a preceding HIF message of type M2M_WIFI_IND_CONN_PARAM |
tstrM2mWiFiGainIdx | Gain Table index selection corresponding to specific WiFi region |
tstrM2mWifiGainsParams | Gain Values |
tstrM2MWifiMonitorModeCtrl | Wi-Fi Monitor Mode Filter |
tstrM2mWifiPsk | Passphrase and PSK for WPA(2) PSK |
tstrM2mWiFiRoaming | Roaming related information |
tstrM2MWifiRxPacketInfo | Wi-Fi RX Frame Header |
tstrM2mWifiscanResult | Wi-Fi Scan Result |
tstrM2mWifiStateChanged | Wi-Fi Connection State |
tstrM2MWifiTxPacketInfo | Wi-Fi TX Packet Info |
tstrM2mWifiWep | WEP security key header |
tstrM2mWifiWepParams | |
tstrM2mWiFiXOSleepEnable | Choose to keep the XO on or off over deep sleep |
tstrM2MWPSConnect | WPS Configuration parameters |
tstrM2MWPSInfo | WPS Result |
tstrMemPool | |
tstrNetworkId | |
tstrNmBusCapabilities | Structure holding bus capabilities information |
tstrNmI2cDefault | Structure holding I2C default operation parameters |
tstrNmI2cSpecial | Structure holding I2C special operation parameters |
tstrNmSpiRw | Structure holding SPI R/W parameters |
tstrNmUartDefault | Structure holding UART default operation parameters |
tstrNotification | |
tstrOtaControlSec | Control Section Structure. The Control Section is used to define the working image and the validity of the roll-back image and its offset, also both firmware versions are kept in this structure |
tstrOtaHostFileEraseStatusResp | Host File OTA Information |
tstrOtaHostFileGetStatusResp | Host File OTA Information |
tstrOtaHostFileReadStatusResp | Host File OTA Information |
tstrOtaInitHdr | This struct contains the OTA image header |
tstrOtaUpdateInfo | This struct contains the OTA update information |
tstrOtaUpdateStatusResp | This struct contains the OTA update status |
tstrPemDecInfo | |
tstrPingCmd | |
tstrPingReply | |
tstrPrng | M2M Request PRNG |
tstrPublicKey | Generic Public Key Structure |
tstrRecvCmd | |
tstrRecvReply | |
tstrRootCertEcdsaKeyInfo | |
tstrRootCertEntryHeader | |
tstrRootCertFlashHeader | |
tstrRootCertPubKeyInfo | |
tstrRootCertRsaKeyInfo | |
tstrRsaPrivateKey | |
tstrRSAPubKey | |
tstrRSAPublicKey | RSA Public Key Definition |
tstrSendCmd | |
tstrSendReply | Send Reply, contains socket number and number of sent bytes |
tstrSetSocketOptCmd | |
tstrShaHashContext | |
tstrSockAddr | |
tstrSockErr | Detail about socket failures. Used with get_error_detail |
tstrSocket | |
tstrSocketAcceptMsg | Socket accept status |
tstrSocketBindMsg | Socket bind status |
tstrSocketConnectMsg | Socket connect status |
tstrSocketListenMsg | Socket listen status |
tstrSocketRecvMsg | Socket recv status |
tstrSslCertExpSettings | SSL Certificate Expiry Validation Settings |
tstrSslSetActiveCsList | |
tstrSSLSetSockOptCmd | |
tstrSSLSocketCreateCmd | |
tstrSystemTime | Used for time storage |
tstrTlsBuffer | |
tstrTLSBufferPos | |
tstrTlsCrlEntry | Certificate data for inclusion in a revocation list (CRL) |
tstrTlsCrlInfo | Certificate revocation list details |
tstrTlsSrvChunkHdr | |
tstrTlsSrvSecFileEntry | This struct contains a TLS certificate |
tstrTlsSrvSecFileHandle | |
tstrTlsSrvSecHdr | This struct contains a set of TLS certificates |
tstrWifiInitParam | Structure, holding the Wi-fi configuration attributes such as the wi-fi callback , monitoring mode callback and Ethernet parameter initialization structure. |
tstrX509AlgID | |
tstrX509Cert | |
tstrX509CertPublicKey | |
tstrX509Name | |
tstrX520DistinguishedName | |
tstrX520Name | |
txtrX509CertInfo | |
uart_cmd_hdr_t | |
udc_config_speed_t | Configuration descriptor and UDI link for one USB speed |
udc_config_t | All information about the USB Device |
udc_desc_t | Structure for USB Device Configuration Descriptor |
udc_string_desc_t | USB device string descriptor Structure used to transfer ASCII strings to USB String descriptor structure |
udd_ctrl_request_t | Global variable to give and record information of the setup request management |
udi_api_t | UDI API |
udi_cdc_comm_desc_t | Communication Class interface descriptor |
udi_cdc_data_desc_t | Data Class interface descriptor |
udi_hid_generic_desc_t | Interface descriptor structure for HID generic |
udi_hid_generic_report_desc_t | Report descriptor for HID generic |
udi_hid_kbd_desc_t | Interface descriptor structure for HID keyboard |
udi_hid_kbd_report_desc_t | Report descriptor for HID keyboard |
udi_hid_mouse_desc_t | Interface descriptor structure for HID mouse |
udi_hid_mouse_report_desc_t | Report descriptor for HID mouse |
udi_hid_multi_touch_desc_t | Interface descriptor structure for HID multi-touch |
udi_hid_multi_touch_report_desc_t | Report descriptor for HID multi-touch |
udi_msc_desc_t | Interface descriptor structure for MSC |
udi_phdc_desc_t | |
udi_phdc_fnctext_desc_t | |
udi_phdc_metadata_t | |
udi_vendor_desc_t | Interface descriptor structure for vendor Class interface |
uhc_device_t | Structure to store device information |
uhd_ctrl_request_t | Structure to store the high level setup request |
uhd_pipe_job_t | Structure definition to store registered jobs on a pipe |
uhi_aoa_dev_t | Stores relevant information about the USB connection |
uhi_api_t | UHI API |
uhi_cdc_buf_t | Internal buffer information |
uhi_cdc_dev_t | USB CDC device information |
uhi_cdc_line_t | Communication line information |
uhi_cdc_port_t | Communication port information |
uhi_hid_mouse_dev_t | |
uhi_msc_dev_t | USB MSC device information |
uhi_msc_lun_t | LUN structure information |
uhi_vendor_dev_t | |
Union16 | 16-bit union |
Union32 | 32-bit union |
Union64 | 64-bit union |
UnionCPtr | Union of pointers to constant 64-, 32-, 16- and 8-bit unsigned integers |
UnionCVPtr | Union of pointers to constant volatile 64-, 32-, 16- and 8-bit unsigned integers |
UnionPtr | Union of pointers to 64-, 32-, 16- and 8-bit unsigned integers |
UnionVPtr | Union of pointers to volatile 64-, 32-, 16- and 8-bit unsigned integers |
UpdateChId_t | |
UpdateDutyCycle_t | |
UpdateDutyCycleTimer_t | |
UpdateJoinDutyCycleTimer_t | |
UpdateNewCh_t | |
usart_config | USART configuration struct |
usart_module | SERCOM USART driver software device instance structure |
usb_association_desc_t | Standard USB Interface Association Descriptor structure |
usb_cdc_acm_desc_t | CDC ACM Functional Descriptor |
usb_cdc_call_mgmt_desc_t | CDC Call Management Functional Descriptor |
usb_cdc_control_signal_t | Control signal structure |
usb_cdc_hdr_desc_t | CDC Header Functional Descriptor |
usb_cdc_line_coding_t | Line Coding structure |
usb_cdc_notify_msg_t | |
usb_cdc_notify_serial_state_t | Hardware handshake support (cdc spec 1.1 chapter 6.3.5) |
usb_cdc_union_desc_t | CDC Union Functional Descriptor |
usb_conf_desc_t | Standard USB configuration descriptor structure |
usb_config | USB configurations |
usb_dev_bos_desc_t | USB Device BOS descriptor structure |
usb_dev_capa_ext_desc_t | USB Device Capabilities - USB 2.0 Extension Descriptor structure |
usb_dev_desc_t | Standard USB device descriptor structure |
usb_dev_lpm_desc_t | USB Device LPM Descriptor structure |
usb_dev_qual_desc_t | Standard USB device qualifier descriptor structure |
usb_device_endpoint_config | USB device endpoint configurations |
usb_endpoint_callback_parameter | USB device endpoint callback status parameter structure |
usb_ep_desc_t | Standard USB endpoint descriptor structure |
usb_hid_descriptor_t | HID Descriptor |
usb_host_pipe_config | USB host pipe configurations |
usb_iad_desc_t | Standard USB association descriptor structure |
usb_iface_desc_t | Standard USB interface descriptor structure |
usb_module | USB software module instance structure |
usb_msc_cbw | |
usb_msc_csw | |
usb_phdc_classfnct_desc_t | PHDC Class Function Descriptor |
usb_phdc_fnctext_desc_t | PHDC Function Extension Descriptor Note: The wDevSpecializations fields must follow this struct |
usb_phdc_fnctext_singlespec_desc_t | PHDC Function Extension Descriptor with single specification |
usb_phdc_meta_data_1_desc_t | |
usb_phdc_meta_data_desc_t | PHDC Meta-Data Descriptor Note: The optional meta-data field (0 to 253B) can follow this struct |
usb_phdc_metadata_msg_1_t | |
usb_phdc_metadata_msg_t | PHDC Meta-Data Message Note: The optional meta-data field (0 to EPx_size-21) can follow this struct |
usb_phdc_qos_desc_t | PHDC QoS Descriptor |
usb_pipe_callback_parameter | USB host pipe callback status parameter structure |
usb_setup_req_t | A USB Device SETUP request |
usb_str_desc_t | A standard USB string descriptor structure |
usb_str_lgid_desc_t | |
user_cmd | User command structure |
user_custom_event | |
ValChId_t | |
ValChMaskCntl_t | |
ValUpdateDrange_t | |
ValUpdateFreqTx_t | |
wdt_conf | Watchdog Timer configuration structure |
wifiProvisionParams | |
wpan_addr_spec_tag | Device address specification structure |
wpan_pandescriptor_tag | PAN descriptor information structure |
xCOMMAND_INPUT_LIST | |
xCOMMAND_LINE_INPUT | |
xEventGroupDefinition | |
xLIST | |
xLIST_ITEM | |
xMEMORY_REGION | |
xMINI_LIST_ITEM | |
xRTOS_HEAP | |
xSTATIC_EVENT_GROUP | |
xSTATIC_LIST | |
xSTATIC_LIST_ITEM | |
xSTATIC_MINI_LIST_ITEM | |
xSTATIC_QUEUE | |
xSTATIC_STREAM_BUFFER | |
xSTATIC_TCB | |
xSTATIC_TIMER | |
xSTREAM_BUFFER | |
xTASK_PARAMETERS | |
xTASK_PARAMTERS | |
xTASK_STATUS | |
xTIME_OUT | |